RESUMO
Enhancing the device performance of organic memory devices while providing high optical transparency and mechanical flexibility requires an optimized combination of functional materials and smart device architecture design. However, it remains a great challenge to realize fully functional transparent and mechanically durable nonvolatile memory because of the limitations of conventional rigid, opaque metal electrodes. Here, we demonstrate ferroelectric nonvolatile memory devices that use graphene electrodes as the epitaxial growth substrate for crystalline poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) polymer. The strong crystallographic interaction between PVDF-TrFE and graphene results in the orientation of the crystals with distinct symmetry, which is favorable for polarization switching upon the electric field. The epitaxial growth of PVDF-TrFE on a graphene layer thus provides excellent ferroelectric performance with high remnant polarization in metal/ferroelectric polymer/metal devices. Furthermore, a fully transparent and flexible array of ferroelectric field effect transistors was successfully realized by adopting transparent poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] semiconducting polymer.
Assuntos
Eletricidade , Grafite/química , Polivinil/química , Semicondutores , EletrodosRESUMO
Efficient room temperature NIR detection with sufficient current gain is made with a solution-processed networked SWNT FET. The high performance NIR-FET with significantly enhanced photocurrent by more than two orders of magnitude compared to dark current in the depleted state is attributed to multiple Schottky barriers in the network, each of which absorb NIR and effectively separate photocarriers to corresponding electrodes.
RESUMO
Printable non-volatile polymer memories are fabricated with solution-processed nanocomposite films of poly(styrene-block-paraphenylene) (PS-b-PPP) and single-wall carbon nanotubes (SWNTs). The devices show stable data retention at high temperatures of up to 100 °C without significant performance degradation due to the strong, non-destructive, and isomorphic π-π interactions between the SWNTs and PPP block.
RESUMO
The direct sensing and storing of the information of liquids with different polarities are of significant interest, in particular, through means related to human senses for emerging biomedical applications. Here, we present an interactive platform capable of sensing and storing the information of liquids. Our platform utilises sound arising from liquid-interactive ferroelectric actuation, which is dependent upon the polarity of the liquid. Liquid-interactive sound is developed when a liquid is placed on a ferroelectric polymer layer across two in-plane electrodes under an alternating current field. As the sound is correlated with non-volatile remnant polarisation of the ferroelectric layer, the information is stored and retrieved after the liquid is removed, resulting in a sensing memory of the liquid. Our pad-type allows for identifying the position of a liquid. Flexible tube-type devices offer a route for in situ analysis of flowing liquids including a human serum liquid in terms of sound.
RESUMO
Two-dimensional (2D) nanosheets of transition metal dichalcogenides (TMDs) are of significant interest for potential photoelectronic applications. However, the fabrication of solution-processed arrays of mechanically flexible thin TMD films-based vertical type p-n junction photodetectors over a large area is a great challenge. Our method is based on controlled solvent evaporation of MoSe2 suspension spread on water surface. Single or few-layered MoSe2 nanosheets modified with the dispersant amine-terminated poly(styrene) (PS-NH2) were homogeneously deposited and stacked on water upon solvent evaporation, giving rise to uniform MoSe2/PS-NH2 composite films that can be readily transferred onto other substrates. A p-n junction vertical diode of Al/p-type Si/p-type poly(9,9-di- n-octylfluorenyl-2,7-diyl)/n-type MoSe2 composite/Au stacked from bottom to top exhibited characteristic rectifying current behavior upon voltage sweep with a rectification ratio of 103. Subsequent illumination of near-infrared light on the device resulted in a substantially enhanced dark current of approximately 103 times greater than that of the nonexposed device. The photodetection performance, that is, switching time, responsivity, and detectivity, were 100.0 ms, 2.5 AW-1, and 2.34 × 1014, respectively. Furthermore, the performance of mechanically flexible photodetectors devices was comparable with that of the devices fabricated on the hard Si substrate even after 1000 bending cycles at a bending diameter of 7.2 mm.
RESUMO
Simultaneous sensing and visualization of pressure provides a useful platform to obtain information about a pressurizing object, but the fabrication of such interactive displays at the single-device level remains challenging. Here, we present a pressure responsive electroluminescent (EL) display that allows for both sensing and visualization of pressure. Our device is based on a two-terminal capacitor with six constituent layers: top electrode/insulator/hole injection layer/emissive layer/electron transport layer/bottom electrode. Light emission upon exposure to an alternating current field between two electrodes is controlled by the capacitance change of the insulator arising from the pressure applied on top. Besides capacitive pressure sensing, our EL display allows for direct visualization of the static and dynamic information of position, shape, and size of a pressurizing object on a single-device platform. Monitoring the pressurized area of an elastomeric hemisphere on a device by EL enables quantitative estimation of the Young's modulus of the elastomer, offering a new and facile characterization method for the mechanical properties of soft materials.
RESUMO
The development of pressure sensors that are effective over a broad range of pressures is crucial for the future development of electronic skin applicable to the detection of a wide pressure range from acoustic wave to dynamic human motion. Here, we present flexible capacitive pressure sensors that incorporate micropatterned pyramidal ionic gels to enable ultrasensitive pressure detection. Our devices show superior pressure-sensing performance, with a broad sensing range from a few pascals up to 50 kPa, with fast response times of <20 ms and a low operating voltage of 0.25 V. Since high-dielectric-constant ionic gels were employed as constituent sensing materials, an unprecedented sensitivity of 41 kPa-1 in the low-pressure regime of <400 Pa could be realized in the context of a metal-insulator-metal platform. This broad-range capacitive pressure sensor allows for the efficient detection of pressure from a variety of sources, including sound waves, a lightweight object, jugular venous pulses, radial artery pulses, and human finger touch. This platform offers a simple, robust approach to low-cost, scalable device design, enabling practical applications of electronic skin.
RESUMO
The characteristic source-drain current hysteresis frequently observed in field-effect transistors with networked single walled carbon-nanotube (NSWNT) channels is problematic for the reliable switching and sensing performance of devices. But the two distinct current states of the hysteresis curve at a zero gate voltage can be useful for memory applications. In this work, we demonstrate a novel non-volatile transistor memory with solution-processed NSWNTs which are suitable for multilevel data programming and reading. A polymer passivation layer with a small amount of water employed on the top of the NSWNT channel serves as an efficient gate voltage dependent charge trapping and de-trapping site. A systematic investigation evidences that the water mixed in a polymer passivation solution is critical for reliable non-volatile memory operation. The optimized device is air-stable and temperature-resistive up to 80 °C and exhibits excellent non-volatile memory performance with an on/off current ratio greater than 10(4), a switching time less than 100 ms, data retention longer than 4000 s, and write/read endurance over 100 cycles. Furthermore, the gate voltage dependent charge injection mediated by water in the passivation layer allowed for multilevel operation of our memory in which 4 distinct current states were programmed repetitively and preserved over a long time period.
RESUMO
While tremendous efforts have been made for developing thin perovskite films suitable for a variety of potential photoelectric applications such as solar cells, field-effect transistors, and photodetectors, only a few works focus on the micropatterning of a perovskite film which is one of the most critical issues for large area and uniform microarrays of perovskite-based devices. Here we demonstrate a simple but robust method of micropatterning a thin perovskite film with controlled crystalline structure which guarantees to preserve its intrinsic photoelectric properties. A variety of micropatterns of a perovskite film are fabricated by either microimprinting or transfer-printing a thin spin-coated precursor film in soft-gel state with a topographically prepatterned elastomeric poly(dimethylsiloxane) (PDMS) mold, followed by thermal treatment for complete conversion of the precursor film to a perovskite one. The key materials development of our solvent-assisted gel printing is to prepare a thin precursor film with a high-boiling temperature solvent, dimethyl sulfoxide. The residual solvent in the precursor gel film makes the film moldable upon microprinting with a patterned PDMS mold, leading to various perovskite micropatterns in resolution of a few micrometers over a large area. Our nondestructive micropatterning process does not harm the intrinsic photoelectric properties of a perovskite film, which allows for realizing arrays of parallel-type photodetectors containing micropatterns of a perovskite film with reliable photoconduction performance. The facile transfer of a micropatterned soft-gel precursor film on other substrates including mechanically flexible plastics can further broaden its applications to flexible photoelectric systems.
RESUMO
Design of materials to be heat-conductive in a preferred direction is a crucial issue for efficient heat dissipation in systems using stacked devices. Here, we demonstrate a facile route to fabricate polymer composites with directional thermal conduction. Our method is based on control of the orientation of fillers with anisotropic heat conduction. Melt-compression of solution-cast poly(vinylidene fluoride) (PVDF) and graphene nanoflake (GNF) films in an L-shape kinked tube yielded a lightweight polymer composite with the surface normal of GNF preferentially aligned perpendicular to the melt-flow direction, giving rise to a directional thermal conductivity of approximately 10 W/mK at 25 vol % with an anisotropic thermal conduction ratio greater than six. The high directional thermal conduction was attributed to the two-dimensional planar shape of GNFs readily adaptable to the molten polymer flow, compared with highly entangled carbon nanotubes and three-dimensional graphite fillers. Furthermore, our composite with its density of approximately 1.5 g/cm(3) was mechanically stable, and its thermal performance was successfully preserved above 100 °C even after multiple heating and cooling cycles. The results indicate that the methodology using an L-shape kinked tube is a new way to achieve polymer composites with highly anisotropic thermal conduction.
RESUMO
The photocurrent conversions of transition metal dichalcogenide nanosheets are unprecedentedly impressive, making them great candidates for visible range photodetectors. Here we demonstrate a method for fabricating micron-thick, flexible films consisting of a variety of highly separated transition metal dichalcogenide nanosheets for excellent band-selective photodetection. Our method is based on the non-destructive modification of transition metal dichalcogenide sheets with amine-terminated polymers. The universal interaction between amine and transition metal resulted in scalable, stable and high concentration dispersions of a single to a few layers of numerous transition metal dichalcogenides. Our MoSe2 and MoS2 composites are highly photoconductive even at bending radii as low as 200 µm on illumination of near infrared and visible light, respectively. More interestingly, simple solution mixing of MoSe2 and MoS2 gives rise to blended composite films in which the photodetection properties were controllable. The MoS2/MoSe2 (5:5) film showed broad range photodetection suitable for both visible and near infrared spectra.
RESUMO
Electroluminescent (EL) devices operating at alternating current (AC) electricity have been of great interest due to not only their unique light emitting mechanism of carrier generation and recombination but also their great potential for applications in displays, sensors, and lighting. Despite great success of AC-EL devices, most device properties are far from real implementation. In particular, the current state-of-the art brightness of the solution-processed AC-EL devices is a few hundred candela per square meter (cd m(-2)) and most of the works have been devoted to red and white emission. In this manuscript, we report extremely bright full color polymer AC-EL devices with brightness of approximately 2300, 6000, and 5000 cd m(-2) for blue (B), green (G), and red (R) emission, respectively. The high brightness of blue emission was attributed to individually networked multiwalled carbon nanotubes (MWNTs) for the facile carrier injection as well as self-assembled block copolymer micelles for suppression of interchain nonradiative energy quenching. In addition, effective FRET from a solution-blended thin film of B-G and B-G-R fluorescent polymers led to very bright green and red EL under AC voltage, respectively. The solution-processed AC-EL device also worked properly with vacuum-free Ag paste on a mechanically flexible polymer substrate. Finally, we successfully demonstrated the long-term operation reliability of our AC-EL device for over 15 h.
RESUMO
High performance field-induced AC electroluminescence (EL) in a simple ITO/insulator/hybrid emitter/Au structure was demonstrated with efficient control of the brightness and colors based on solution-processed nanohybrids of CdSe-ZnS core-shell colloidal quantum dots and fluorescent polymers.