A microfluidic apparatus for the study of ice nucleation in supercooled water drops.

This paper describes a microfluidic instrument that produces drops of supercooled water suspended in a moving stream of liquid fluorocarbon, and measures the temperatures at which ice nucleates in the drops. A microfluidic chip containing a monodisperse drop generator and a straight channel with 38 embedded resistance thermometers was placed in contact with a seven-zone temperature-control plate and imaged under a microscope with a high-speed camera. This instrument can record the freezing temperatures of tens of thousands of drops within minutes, with an accuracy of 0.4 degrees C. The ice-nucleation temperatures in approximately 80-microm drops were reported for the freezing of 37 061 drops of pure water, and of 8898 drops of water seeded with silver iodide. Nucleation of ice in pure water was homogenous and occurred at temperatures between -36 and -37.8 degrees C, while water containing silver iodide froze between -10 and -19 degrees C. The instrument recorded the largest sets of individual freezing temperatures (37 061), had the fastest data acquisition rate (75 measurements/s), and the best optical (3 microm) and temporal (70 micros) resolutions among instruments designed to study nucleation of ice. The dendritic growth of ice in 150-microm drops of supercooled water at -35 degrees C was observed and imaged at a rate of 16 000 frames/s.

Broadband super-collimation in a hybrid photonic crystal structure.

We propose a two dimensional (2D) photonic crystal (PhC) structure that supports super-collimation over a large frequency range (over 4 times that of a traditional square lattice of holes). We theoretically and numerically investigate the collimation mechanism in our 2D structure, in comparison to that of two other frequently used related PhC structures. We also point out the potential importance of our proposed structure in the design of super-collimation-based devices for both monochromatic and polychromatic light.

Fundamental relation between phase and group velocity, and application to the failure of perfectly matched layers in backward-wave structures.

We demonstrate that the ratio of group to phase velocity has a simple relationship to the orientation of the electromagnetic field. In nondispersive materials, opposite group and phase velocity corresponds to fields that are mostly oriented in the propagation direction. More generally, this relationship (including the case of dispersive and negative-index materials) offers a perspective on the phenomena of backward waves and left-handed media. As an application of this relationship, we demonstrate and explain an irrecoverable failure of perfectly matched layer absorbing boundaries in computer simulations for constant cross-section waveguides with backward-wave modes and suggest an alternative in the form of adiabatic isotropic absorbers.

Purcell effect in nonlinear photonic structures: a coupled mode theory analysis.

We develop a coupled mode theory (CMT) model of the behavior of a polarization source in a general photonic structure, and obtain an analytical expression for the resulting generated electric field; loss, gain and/or nonlinearities can also be modeled. Based on this treatment, we investigate the criteria needed to achieve an enhancement in various nonlinear effects, and to produce efficient sources of terahertz radiation, in particular. Our results agree well with exact finite-difference time-domain (FDTD) results. Therefore, this approach can also in certain circumstances be used as a potential substitute for the more numerically intensive FDTD method.

Microcavities based on multimodal interference.

We describe intricate cavity mode structures, that are possible in waveguide devices with two or more guided modes. The main element is interference between the scattered fields of two modes at the facets, resulting in multipole or mode cancelations. Therefore, strong coupling between the modes, such as around zero group velocity points, is advantageous to obtain high quality factors. We discuss the mechanism in three different settings: a cylindrical structure with and without negative group velocity mode, and a surface plasmon device. A general semi-analytical expression for the cavity parameters describes the phenomenon, and it is validated with extensive numerical calculations.

Computation and visualization of Casimir forces in arbitrary geometries: nonmonotonic lateral-wall forces and the failure of proximity-force approximations.

We present a method of computing Casimir forces for arbitrary geometries, with any desired accuracy, that can directly exploit the efficiency of standard numerical-electromagnetism techniques. Using the simplest possible finite-difference implementation of this approach, we obtain both agreement with past results for cylinder-plate geometries, and also present results for new geometries. In particular, we examine a pistonlike problem involving two dielectric and metallic squares sliding between two metallic walls, in two and three dimensions, respectively, and demonstrate nonadditive and nonmonotonic changes in the force due to these lateral walls.

Surface-emitting fiber lasers.

All fiber lasers to date emit radiation only along the fiber axis. Here a fiber that exhibits laser emission that is radially directed from its circumferential surface is demonstrated. A unique and controlled azimuthally anisotropic optical wave front results from the interplay between a cylindrical photonic bandgap fiber resonator, anisotropic organic dye gain, and a linearly polarized axial pump. Low threshold (86nJ) lasing at nine different wavelengths is demonstrated throughout the visible and near-infrared spectra. We also report the experimental realization of unprecedented layer thicknesses of 29.5 nm maintained throughout meter-long fibers. Such a device may have interesting medical applications ranging from photodynamic therapy to in vivo molecular imaging, as well as textile fabric displays.

High-Q enhancement of attractive and repulsive optical forces between coupled whispering-gallery- mode resonators.

We have calculated the optically-induced force between coupled high-Q whispering gallery modes of microsphere resonators. Attractive and repulsive forces are found, depending whether the bi-sphere mode is symmetric or antisymmetric. The magnitude of the force is linearly proportional to the total power in the spheres and consequently linearly enhanced by Q. Forces on the order of 100 nN are found for Q=108, large enough to cause displacements in the range of 1mum when the sphere is attached to a fiber stem with spring constant 0.004 N/m.

Optical bistability and cutoff solitons in photonic bandgap fibers.

We present detailed theoretical and numerical analysis of certain novel non-linear optical phenomena enabled by photonic bandgap fibers. In particular, we demonstrate the feasibility of optical bistability in an axially modulated nonlinear photonic bandgap fiber through analytical theory and detailed numerical experiments. At 1.55microm carrier wavelength, the in-fiber devices we propose can operate with only a few tens of mW of power, have a nearly instantaneous response and recovery time, and be shorter than 100microm. Furthermore, we predict existence of gap-like solitons (which have thus-far been described only in axially periodic systems) in axially uniform photonic bandgap fibers.

Dispersion tailoring and compensation by modal interactions in OmniGuide fibers.

We present a method for dispersion-tailoring of OmniGuide and other photonic band-gap guided fibers based on weak interactions ("anticrossings") between the core-guided mode and a mode localized in an intentionally introduced defect of the crystal. Because the core mode can be guided in air and the defect mode in a much higher-index material, we are able to obtain dispersion parameters in excess of 500,000 ps/nm-km. Furthermore, because the dispersion is controlled entirely by geometric parameters and not by material dispersion, it is easily tunable by structural choices and fiber-drawing speed. So, for example, we demonstrate how the large dispersion can be made to coincide with a dispersion slope that matches commercial silica fibers to better than 1%, promising efficient compensation. Other parameters are shown to yield dispersion-free transmission in a hollow OmniGuide fiber that also maintains low losses and negligible nonlinearities, with a nondegenerate TE01 mode immune to polarization-mode dispersion (PMD). We present theoretical calculations for a chalcogenide-based material system that has recently been experimentally drawn.

Adiabatic theorem and continuous coupled-mode theory for efficient taper transitions in photonic crystals.

We prove that an adiabatic theorem generally holds for slow tapers in photonic crystals and other strongly grated waveguides with arbitrary index modulation, exactly as in conventional waveguides. This provides a guaranteed pathway to efficient and broad-bandwidth couplers with, e.g., uniform waveguides. We show that adiabatic transmission can only occur, however, if the operating mode is propagating (nonevanescent) and guided at every point in the taper. Moreover, we demonstrate how straightforward taper designs in photonic crystals can violate these conditions, but that adiabaticity is restored by simple design principles involving only the independent band structures of the intermediate gratings. For these and other analyses, we develop a generalization of the standard coupled-mode theory to handle arbitrary nonuniform gratings via an instantaneous Bloch-mode basis, yielding a continuous set of differential equations for the basis coefficients. We show how one can thereby compute semianalytical reflection and transmission through crystal tapers of almost any length, using only a single pair of modes in the unit cells of uniform gratings. Unlike other numerical methods, our technique becomes more accurate as the taper becomes more gradual, with no significant increase in the computation time or memory. We also include numerical examples comparing to a well-established scattering-matrix method in two dimensions.

Optimal bistable switching in nonlinear photonic crystals.

We present an analytical model and numerical experiments to describe optimal bistable switching in a nonlinear photonic crystal system. It is proved that only three parameters are needed to characterize a bistable switch: the resonant frequency omega(res), the quality factor Q, and parameter kappa that measures nonlinear "feedback strength." A photonic crystal enables the device to operate in single-mode fashion, as if it were effectively one dimensional. This provides optimal control over the input and output and facilitates further large-scale optical integration.

Analysis of mode structure in hollow dielectric waveguide fibers.

In this paper, we analyze the electromagnetic mode structure of an OmniGuide fiber-a hollow dielectric waveguide in which light is confined by a large index-contrast omnidirectional dielectric mirror. In particular, we find that the modes in an OmniGuide fiber are similar to those in a hollow metallic waveguide in their symmetries, cutoff frequencies, and dispersion relations. We show that the differences can be predicted by a model based on a single parameter-the phase shift upon reflection from the dielectric mirror. The analogy to the metal waveguide extends to the transmission properties, resulting in the identification of the TE01 mode as the lowest-loss mode of the OmniGuide fiber.

Enhanced photonic band-gap confinement via Van Hove saddle point singularities.

We show that a saddle point Van Hove singularity in a band adjacent to a photonic crystal band gap can lead to situations which defy the conventional wisdom that the strongest band-gap confinement is found at frequencies near the midgap. As an example, we present a two-dimensional square photonic crystal waveguide where the strongest confinement is close to the band edge. The underlying mechanism can also apply to any system that is described by a band structure with a gap. In general, the saddle point favors the appearance of a very flat band, which in turn results in an enhanced confinement at band-gap frequencies immediately above or below the flat band.

Doppler radiation emitted by an oscillating dipole moving inside a photonic band-gap crystal.

We study the radiation emitted by an oscillating dipole moving with a constant velocity in a photonic crystal, and analyze the effects that arise in the presence of a photonic band gap. It is demonstrated through numerical simulations that the radiation strength may be enhanced or inhibited according to the photonic band structure, and anomalous effects in the sign and magnitude of the Doppler shifts are possible, both outside and inside the gap. We suggest that this effect could be used to identify the physical origin of the backward waves in recent metamaterials.

Achieving centimetre-scale supercollimation in a large-area two-dimensional photonic crystal.

Diffraction, a fundamental process in wave physics, leads to spreading of the optical beams as they propagate. However, new photonic crystal (PhC) meta-materials can be nano-engineered to generate extreme anisotropy, resulting in apparent propagation of light without diffraction. This surprising phenomenon, called supercollimation, effectively freezes the spatial width of a light beam inside a PhC, observed over a few isotropic diffraction-lengths. However, using such experiments to predict the behaviour for longer propagation lengths is difficult, as a tiny error in a measured width can extrapolate to order unity uncertainty in the width at distances over hundreds of diffraction-lengths. Here, supercollimation is demonstrated in a macroscopic PhC system over centimetre-scale distances, retaining spatial width confinement without the need for waveguides or nonlinearities. Through quantitative studies of the beam evolution in a two-dimensional PhC, we find that supercollimation possesses unexpected but inherent robustness with respect to short-scale disorder such as fabrication roughness, enabling supercollimation over 600 isotropic diffraction-lengths. The effects of disorder are identified through experiments and understood through rigorous simulations. In addition, a supercollimation steering capability is proposed.

Microcavity confinement based on an anomalous zero group-velocity waveguide mode.

We propose and demonstrate a mechanism for small-modal-volume high-Q cavities based on an anomalous uniform waveguide mode that has zero group velocity at a nonzero wave vector. In a short piece of a uniform waveguide with a specially designed cross section, light is confined longitudinally by small group-velocity propagation and transversely by a reflective cladding. The quality factor Q is greatly enhanced by the small group velocity for a set of cavity lengths that are separated by approximately pi/k0, where k0 is the longitudinal wave vector for which the group velocity is zero.

Surface-plasmon-assisted guiding of broadband slow and subwavelength light in air.

A class of axially uniform waveguides is introduced, employing a new mechanism to guide light inside a low-index dielectric material without the use of photonic band gap, and simultaneously exhibiting subwavelength modal size and very slow group velocity over an unusually large frequency bandwidth. Their basis is the presence of plasmonic modes on the interfaces between dielectric regions and the flat unpatterned surface of a bulk metallic substrate. These novel waveguides allow for easy broadband coupling and exhibit absorption losses limited only by the intrinsic loss of the metal.

Evanescent-wave bonding between optical waveguides.

Forces arising from overlap between the guided waves of parallel, microphotonic waveguides are calculated. Both attractive and repulsive forces, determined by the choice of relative input phase, are found. Using realistic parameters for a silicon-on-insulator material system, we estimate that the forces are large enough to cause observable displacements. Our results illustrate the potential for a broader class of optically tunable microphotonic devices and microstructured artificial materials.

Cerenkov radiation in photonic crystals.

In a conventional material, the coherent Cerenkov radiation due to a moving charged particle is associated with a velocity threshold, a forward-pointing radiation cone, and a forward direction of emission. We describe different behavior for the Cerenkov radiation in a photonic crystal. In particular, this radiation is intrinsically coupled with transition radiation and is observable without any threshold. Within one particle-velocity range, we found a radiation pattern with a backward-pointing radiation cone. In another velocity range, backward-propagating Cerenkov radiation can be expected. Potential applications include velocity-sensitive particle detection and radiation generation at selectable frequencies.