Hybrid Technique for Cyber-Physical Security in Cloud-Based Smart Industries.

New technologies and trends in industries have opened up ways for distributed establishment of Cyber-Physical Systems (CPSs) for smart industries. CPSs are largely based upon Internet of Things (IoT) because of data storage on cloud servers which poses many constraints due to the heterogeneous nature of devices involved in communication. Among other challenges, security is the most daunting challenge that contributes, at least in part, to the impeded momentum of the CPS realization. Designers assume that CPSs are themselves protected as they cannot be accessed from external networks. However, these days, CPSs have combined parts of the cyber world and also the physical layer. Therefore, cyber security problems are large for commercial CPSs because the systems move with one another and conjointly with physical surroundings, i.e., Complex Industrial Applications (CIA). Therefore, in this paper, a novel data security algorithm Dynamic Hybrid Secured Encryption Technique (DHSE) is proposed based on the hybrid encryption scheme of Advanced Encryption Standard (AES), Identity-Based Encryption (IBE) and Attribute-Based Encryption (ABE). The proposed algorithm divides the data into three categories, i.e., less sensitive, mid-sensitive and high sensitive. The data is distributed by forming the named-data packets (NDPs) via labelling the names. One can choose the number of rounds depending on the actual size of a key; it is necessary to perform a minimum of 10 rounds for 128-bit keys in DHSE. The average encryption time taken by AES (Advanced Encryption Standard), IBE (Identity-based encryption) and ABE (Attribute-Based Encryption) is 3.25 ms, 2.18 ms and 2.39 ms, respectively. Whereas the average time taken by the DHSE encryption algorithm is 2.07 ms which is very much less when compared to other algorithms. Similarly, the average decryption times taken by AES, IBE and ABE are 1.77 ms, 1.09 ms and 1.20 ms and the average times taken by the DHSE decryption algorithms are 1.07 ms, which is very much less when compared to other algorithms. The analysis shows that the framework is well designed and provides confidentiality of data with minimum encryption and decryption time. Therefore, the proposed approach is well suited for CPS-IoT.

ESEERP: Enhanced Smart Energy Efficient Routing Protocol for Internet of Things in Wireless Sensor Nodes.

Wireless sensor networks (WSNs) have recently been viewed as the basic architecture that prepared the way for the Internet of Things (IoT) to arise. Nevertheless, when WSNs are linked with the IoT, a difficult issue arises due to excessive energy utilization in their nodes and short network longevity. As a result, energy constraints in sensor nodes, sensor data sharing and routing protocols are the fundamental topics in WSN. This research presents an enhanced smart-energy-efficient routing protocol (ESEERP) technique that extends the lifetime of the network and improves its connection to meet the aforementioned deficiencies. It selects the Cluster Head (CH) depending on an efficient optimization method derived from several purposes. It aids in the reduction of sleepy sensor nodes and decreases energy utilization. A Sail Fish Optimizer (SFO) is used to find an appropriate route to the sink node for data transfer following CH selection. Regarding energy utilization, bandwidth, packet delivery ratio and network longevity, the proposed methodology is mathematically studied, and the results have been compared to identical current approaches such as a Genetic algorithm (GA), Ant Lion optimization (ALO) and Particle Swarm Optimization (PSO). The simulation shows that in the proposed approach for the longevity of the network, there are 3500 rounds; energy utilization achieves a maximum of 0.5 Joules; bandwidth transmits the data at the rate of 0.52 MBPS; the packet delivery ratio (PDR) is at the rate of 96% for 500 nodes, respectively.

Fine-Tuned DenseNet-169 for Breast Cancer Metastasis Prediction Using FastAI and 1-Cycle Policy.

Lymph node metastasis in breast cancer may be accurately predicted using a DenseNet-169 model. However, the current system for identifying metastases in a lymph node is manual and tedious. A pathologist well-versed with the process of detection and characterization of lymph nodes goes through hours investigating histological slides. Furthermore, because of the massive size of most whole-slide images (WSI), it is wise to divide a slide into batches of small image patches and apply methods independently on each patch. The present work introduces a novel method for the automated diagnosis and detection of metastases from whole slide images using the Fast AI framework and the 1-cycle policy. Additionally, it compares this new approach to previous methods. The proposed model has surpassed other state-of-art methods with more than 97.4% accuracy. In addition, a mobile application is developed for prompt and quick response. It collects user information and models to diagnose metastases present in the early stages of cancer. These results indicate that the suggested model may assist general practitioners in accurately analyzing breast cancer situations, hence preventing future complications and mortality. With digital image processing, histopathologic interpretation and diagnostic accuracy have improved considerably.

Efficient Middleware for the Portability of PaaS Services Consuming Applications among Heterogeneous Clouds.

Cloud providers create a vendor-locked-in environment by offering proprietary and non-standard APIs, resulting in a lack of interoperability and portability among clouds. To overcome this deterrent, solutions must be developed to exploit multiple clouds efficaciously. This paper proposes a middleware platform to mitigate the application portability issue among clouds. A literature review is also conducted to analyze the solutions for application portability. The middleware allows an application to be ported on various platform-as-a-service (PaaS) clouds and supports deploying different services of an application on disparate clouds. The efficiency of the abstraction layer is validated by experimentation on an application that uses the message queue, Binary Large Objects (BLOB), email, and short message service (SMS) services of various clouds via the proposed middleware against the same application using these services via their native code. The experimental results show that adding this middleware mildly affects the latency, but it dramatically reduces the developer's overhead of implementing each service for different clouds to make it portable.

A Novel Blockchain-Based Healthcare System Design and Performance Benchmarking on a Multi-Hosted Testbed.

As a result of the proliferation of digital and network technologies in all facets of modern society, including the healthcare systems, the widespread adoption of Electronic Healthcare Records (EHRs) has become the norm. At the same time, Blockchain has been widely accepted as a potent solution for addressing security issues in any untrusted, distributed, decentralized application and has thus seen a slew of works on Blockchain-enabled EHRs. However, most such prototypes ignore the performance aspects of proposed designs. In this paper, a prototype for a Blockchain-based EHR has been presented that employs smart contracts with Hyperledger Fabric 2.0, which also provides a unified performance analysis with Hyperledger Caliper 0.4.2. The additional contribution of this paper lies in the use of a multi-hosted testbed for the performance analysis in addition to far more realistic Gossip-based traffic scenario analysis with Tcpdump tools. Moreover, the prototype is tested for performance with superior transaction ordering schemes such as Kafka and RAFT, unlike other literature that mostly uses SOLO for the purpose, which accounts for superior fault tolerance. All of these additional unique features make the performance evaluation presented herein much more realistic and hence adds hugely to the credibility of the results obtained. The proposed framework within the multi-host instances continues to behave more successfully with high throughput, low latency, and low utilization of resources for opening, querying, and transferring transactions into a healthcare Blockchain network. The results obtained in various rounds of evaluation demonstrate the superiority of the proposed framework.

BBNSF: Blockchain-Based Novel Secure Framework Using RP2-RSA and ASR-ANN Technique for IoT Enabled Healthcare Systems.

The wearable healthcare equipment is primarily designed to alert patients of any specific health conditions or to act as a useful tool for treatment or follow-up. With the growth of technologies and connectivity, the security of these devices has become a growing concern. The lack of security awareness amongst novice users and the risk of several intermediary attacks for accessing health information severely endangers the use of IoT-enabled healthcare systems. In this paper, a blockchain-based secure data storage system is proposed along with a user authentication and health status prediction system. Firstly, this work utilizes reversed public-private keys combined Rivest-Shamir-Adleman (RP2-RSA) algorithm for providing security. Secondly, feature selection is completed by employing the correlation factor-induced salp swarm optimization algorithm (CF-SSOA). Finally, health status classification is performed using advanced weight initialization adapted SignReLU activation function-based artificial neural network (ASR-ANN) which classifies the status as normal and abnormal. Meanwhile, the abnormal measures are stored in the corresponding patient blockchain. Here, blockchain technology is used to store medical data securely for further analysis. The proposed model has achieved an accuracy of 95.893% and is validated by comparing it with other baseline techniques. On the security front, the proposed RP2-RSA attains a 96.123% security level.

An Optimized Framework for WSN Routing in the Context of Industry 4.0.

The advancements in Industry 4.0 have opened up new ways for the structural deployment of Smart Grids (SGs) to face the endlessly rising challenges of the 21st century. SGs for Industry 4.0 can be better managed by optimized routing techniques. In Mobile Ad hoc Networks (MANETs), the topology is not fixed and can be encountered by interference, mobility of nodes, propagation of multi-paths, and path loss. To extenuate these concerns for SGs, in this paper, we have presented a new version of the standard Optimized Link State Routing (OLSR) protocol for SGs to improve the management of control intervals that enhance the efficiency of the standard OLSR protocol without affecting its reliability. The adapted fault tolerant approach makes the proposed protocol more reliable for industrial applications. The process of grouping of nodes supports managing the total network cost by reducing severe flooding and evaluating an optimized head of clusters. The head of the unit is nominated according to the first defined expectation factor. With a sequence of rigorous performance evaluations under simulation parameters, the simulation results show that the proposed version of OLSR has proliferated Quality of Service (QoS) metrics when it is compared against the state-of-the-art-based conventional protocols, namely, standard OLSR, DSDV, AOMDV and hybrid routing technique.

A Tri-Stage Wrapper-Filter Feature Selection Framework for Disease Classification.

In machine learning and data science, feature selection is considered as a crucial step of data preprocessing. When we directly apply the raw data for classification or clustering purposes, sometimes we observe that the learning algorithms do not perform well. One possible reason for this is the presence of redundant, noisy, and non-informative features or attributes in the datasets. Hence, feature selection methods are used to identify the subset of relevant features that can maximize the model performance. Moreover, due to reduction in feature dimension, both training time and storage required by the model can be reduced as well. In this paper, we present a tri-stage wrapper-filter-based feature selection framework for the purpose of medical report-based disease detection. In the first stage, an ensemble was formed by four filter methods-Mutual Information, ReliefF, Chi Square, and Xvariance-and then each feature from the union set was assessed by three classification algorithms-support vector machine, naïve Bayes, and k-nearest neighbors-and an average accuracy was calculated. The features with higher accuracy were selected to obtain a preliminary subset of optimal features. In the second stage, Pearson correlation was used to discard highly correlated features. In these two stages, XGBoost classification algorithm was applied to obtain the most contributing features that, in turn, provide the best optimal subset. Then, in the final stage, we fed the obtained feature subset to a meta-heuristic algorithm, called whale optimization algorithm, in order to further reduce the feature set and to achieve higher accuracy. We evaluated the proposed feature selection framework on four publicly available disease datasets taken from the UCI machine learning repository, namely, arrhythmia, leukemia, DLBCL, and prostate cancer. Our obtained results confirm that the proposed method can perform better than many state-of-the-art methods and can detect important features as well. Less features ensure less medical tests for correct diagnosis, thus saving both time and cost.

A Survey of Deep Convolutional Neural Networks Applied for Prediction of Plant Leaf Diseases.

In the modern era, deep learning techniques have emerged as powerful tools in image recognition. Convolutional Neural Networks, one of the deep learning tools, have attained an impressive outcome in this area. Applications such as identifying objects, faces, bones, handwritten digits, and traffic signs signify the importance of Convolutional Neural Networks in the real world. The effectiveness of Convolutional Neural Networks in image recognition motivates the researchers to extend its applications in the field of agriculture for recognition of plant species, yield management, weed detection, soil, and water management, fruit counting, diseases, and pest detection, evaluating the nutrient status of plants, and much more. The availability of voluminous research works in applying deep learning models in agriculture leads to difficulty in selecting a suitable model according to the type of dataset and experimental environment. In this manuscript, the authors present a survey of the existing literature in applying deep Convolutional Neural Networks to predict plant diseases from leaf images. This manuscript presents an exemplary comparison of the pre-processing techniques, Convolutional Neural Network models, frameworks, and optimization techniques applied to detect and classify plant diseases using leaf images as a data set. This manuscript also presents a survey of the datasets and performance metrics used to evaluate the efficacy of models. The manuscript highlights the advantages and disadvantages of different techniques and models proposed in the existing literature. This survey will ease the task of researchers working in the field of applying deep learning techniques for the identification and classification of plant leaf diseases.

Robust and Secure Data Transmission Using Artificial Intelligence Techniques in Ad-Hoc Networks.

The paper presents a new security aspect for a Mobile Ad-Hoc Network (MANET)-based IoT model using the concept of artificial intelligence. The Black Hole Attack (BHA) is considered one of the most affecting threats in the MANET in which the attacker node drops the entire data traffic and hence degrades the network performance. Therefore, it necessitates the designing of an algorithm that can protect the network from the BHA node. This article introduces Ad-hoc On-Demand Distance Vector (AODV), a new updated routing protocol that combines the advantages of the Artificial Bee Colony (ABC), Artificial Neural Network (ANN), and Support Vector Machine (SVM) techniques. The combination of the SVM with ANN is the novelty of the proposed model that helps to identify the attackers within the discovered route using the AODV routing mechanism. Here, the model is trained using ANN but the selection of training data is performed using the ABC fitness function followed by SVM. The role of ABC is to provide a better route for data transmission between the source and the destination node. The optimized route, suggested by ABC, is then passed to the SVM model along with the node's properties. Based on those properties ANN decides whether the node is a normal or an attacker node. The simulation analysis performed in MATLAB shows that the proposed work exhibits an improvement in terms of Packet Delivery Ratio (PDR), throughput, and delay. To validate the system efficiency, a comparative analysis is performed against the existing approaches such as Decision Tree and Random Forest that indicate that the utilization of the SVM with ANN is a beneficial step regarding the detection of BHA attackers in the MANET-based IoT networks.

Edge Caching Based on Collaborative Filtering for Heterogeneous ICN-IoT Applications.

The substantial advancements offered by the edge computing has indicated serious evolutionary improvements for the internet of things (IoT) technology. The rigid design philosophy of the traditional network architecture limits its scope to meet future demands. However, information centric networking (ICN) is envisioned as a promising architecture to bridge the huge gaps and maintain IoT networks, mostly referred as ICN-IoT. The edge-enabled ICN-IoT architecture always demands efficient in-network caching techniques for supporting better user's quality of experience (QoE). In this paper, we propose an enhanced ICN-IoT content caching strategy by enabling artificial intelligence (AI)-based collaborative filtering within the edge cloud to support heterogeneous IoT architecture. This collaborative filtering-based content caching strategy would intelligently cache content on edge nodes for traffic management at cloud databases. The evaluations has been conducted to check the performance of the proposed strategy over various benchmark strategies, such as LCE, LCD, CL4M, and ProbCache. The analytical results demonstrate the better performance of our proposed strategy with average gain of 15% for cache hit ratio, 12% reduction in content retrieval delay, and 28% reduced average hop count in comparison to best considered LCD. We believe that the proposed strategy will contribute an effective solution to the related studies in this domain.

IoT and Interpretable Machine Learning Based Framework for Disease Prediction in Pearl Millet.

Decrease in crop yield and degradation in product quality due to plant diseases such as rust and blast in pearl millet is the cause of concern for farmers and the agriculture industry. The stipulation of expert advice for disease identification is also a challenge for the farmers. The traditional techniques adopted for plant disease detection require more human intervention, are unhandy for farmers, and have a high cost of deployment, operation, and maintenance. Therefore, there is a requirement for automating plant disease detection and classification. Deep learning and IoT-based solutions are proposed in the literature for plant disease detection and classification. However, there is a huge scope to develop low-cost systems by integrating these techniques for data collection, feature visualization, and disease detection. This research aims to develop the 'Automatic and Intelligent Data Collector and Classifier' framework by integrating IoT and deep learning. The framework automatically collects the imagery and parametric data from the pearl millet farmland at ICAR, Mysore, India. It automatically sends the collected data to the cloud server and the Raspberry Pi. The 'Custom-Net' model designed as a part of this research is deployed on the cloud server. It collaborates with the Raspberry Pi to precisely predict the blast and rust diseases in pearl millet. Moreover, the Grad-CAM is employed to visualize the features extracted by the 'Custom-Net'. Furthermore, the impact of transfer learning on the 'Custom-Net' and state-of-the-art models viz. Inception ResNet-V2, Inception-V3, ResNet-50, VGG-16, and VGG-19 is shown in this manuscript. Based on the experimental results, and features visualization by Grad-CAM, it is observed that the 'Custom-Net' extracts the relevant features and the transfer learning improves the extraction of relevant features. Additionally, the 'Custom-Net' model reports a classification accuracy of 98.78% that is equivalent to state-of-the-art models viz. Inception ResNet-V2, Inception-V3, ResNet-50, VGG-16, and VGG-19. Although the classification of 'Custom-Net' is comparable to state-of-the-art models, it is effective in reducing the training time by 86.67%. It makes the model more suitable for automating disease detection. This proves that the proposed model is effective in providing a low-cost and handy tool for farmers to improve crop yield and product quality.

Classification of Skin Disease Using Deep Learning Neural Networks with MobileNet V2 and LSTM.

Deep learning models are efficient in learning the features that assist in understanding complex patterns precisely. This study proposed a computerized process of classifying skin disease through deep learning based MobileNet V2 and Long Short Term Memory (LSTM). The MobileNet V2 model proved to be efficient with a better accuracy that can work on lightweight computational devices. The proposed model is efficient in maintaining stateful information for precise predictions. A grey-level co-occurrence matrix is used for assessing the progress of diseased growth. The performance has been compared against other state-of-the-art models such as Fine-Tuned Neural Networks (FTNN), Convolutional Neural Network (CNN), Very Deep Convolutional Networks for Large-Scale Image Recognition developed by Visual Geometry Group (VGG), and convolutional neural network architecture that expanded with few changes. The HAM10000 dataset is used and the proposed method has outperformed other methods with more than 85% accuracy. Its robustness in recognizing the affected region much faster with almost 2× lesser computations than the conventional MobileNet model results in minimal computational efforts. Furthermore, a mobile application is designed for instant and proper action. It helps the patient and dermatologists identify the type of disease from the affected region's image at the initial stage of the skin disease. These findings suggest that the proposed system can help general practitioners efficiently and effectively diagnose skin conditions, thereby reducing further complications and morbidity.

An Optimized Framework for Energy-Resource Allocation in A Cloud Environment based on the Whale Optimization Algorithm.

Cloud computing offers the services to access, manipulate and configure data online over the web. The cloud term refers to an internet network which is remotely available and accessible at anytime from anywhere. Cloud computing is undoubtedly an innovation as the investment in the real and physical infrastructure is much greater than the cloud technology investment. The present work addresses the issue of power consumption done by cloud infrastructure. As there is a need for algorithms and techniques that can reduce energy consumption and schedule resource for the effectiveness of servers. Load balancing is also a significant part of cloud technology that enables the balanced distribution of load among multiple servers to fulfill users' growing demand. The present work used various optimization algorithms such as particle swarm optimization (PSO), cat swarm optimization (CSO), BAT, cuckoo search algorithm (CSA) optimization algorithm and the whale optimization algorithm (WOA) for balancing the load, energy efficiency, and better resource scheduling to make an efficient cloud environment. In the case of seven servers and eight server's settings, the results revealed that whale optimization algorithm outperformed other algorithms in terms of response time, energy consumption, execution time and throughput.

Data-Driven Cervical Cancer Prediction Model with Outlier Detection and Over-Sampling Methods.

Globally, cervical cancer remains as the foremost prevailing cancer in females. Hence, it is necessary to distinguish the importance of risk factors of cervical cancer to classify potential patients. The present work proposes a cervical cancer prediction model (CCPM) that offers early prediction of cervical cancer using risk factors as inputs. The CCPM first removes outliers by using outlier detection methods such as density-based spatial clustering of applications with noise (DBSCAN) and isolation forest (iForest) and by increasing the number of cases in the dataset in a balanced way, for example, through synthetic minority over-sampling technique (SMOTE) and SMOTE with Tomek link (SMOTETomek). Finally, it employs random forest (RF) as a classifier. Thus, CCPM lies on four scenarios: (1) DBSCAN + SMOTETomek + RF, (2) DBSCAN + SMOTE+ RF, (3) iForest + SMOTETomek + RF, and (4) iForest + SMOTE + RF. A dataset of 858 potential patients was used to validate the performance of the proposed method. We found that combinations of iForest with SMOTE and iForest with SMOTETomek provided better performances than those of DBSCAN with SMOTE and DBSCAN with SMOTETomek. We also observed that RF performed the best among several popular machine learning classifiers. Furthermore, the proposed CCPM showed better accuracy than previously proposed methods for forecasting cervical cancer. In addition, a mobile application that can collect cervical cancer risk factors data and provides results from CCPM is developed for instant and proper action at the initial stage of cervical cancer.

Analytical Study of Hybrid Techniques for Image Encryption and Decryption.

The majority of imaging techniques use symmetric and asymmetric cryptography algorithms to encrypt digital media. Most of the research works contributed in the literature focus primarily on the Advanced Encryption Standard (AES) algorithm for encryption and decryption. This paper propose an analysis for performing image encryption and decryption by hybridization of Elliptic Curve Cryptography (ECC) with Hill Cipher (HC), ECC with Advanced Encryption Standard (AES) and ElGamal with Double Playfair Cipher (DPC). This analysis is based on the following parameters: (i) Encryption and decryption time, (ii) entropy of encrypted image, (iii) loss in intensity of the decrypted image, (iv) Peak Signal to Noise Ratio (PSNR), (v) Number of Pixels Change Rate (NPCR), and (vi) Unified Average Changing Intensity (UACI). The hybrid process involves the speed and ease of implementation from symmetric algorithms, as well as improved security from asymmetric algorithms. ECC and ElGamal cryptosystems provide asymmetric key cryptography, while HC, AES, and DPC are symmetric key algorithms. ECC with AES are perfect for remote or private communications with smaller image sizes based on the amount of time needed for encryption and decryption. The metric measurement with test cases finds that ECC and HC have a good overall solution for image encryption.

Geo-Social Top-k and Skyline Keyword Queries on Road Networks.

The rapid growth of GPS-enabled mobile devices has popularized many location-based applications. Spatial keyword search which finds objects of interest by considering both spatial locations and textual descriptions has become very useful in these applications. The recent integration of social data with spatial keyword search opens a new service horizon for users. Few previous studies have proposed methods to combine spatial keyword queries with social data in Euclidean space. However, most real-world applications constrain the distance between query location and data objects by a road network, where distance between two points is defined by the shortest connecting path. This paper proposes geo-social top-k keyword queries and geo-social skyline keyword queries on road networks. Both queries enrich traditional spatial keyword query semantics by incorporating social relevance component. We formalize the proposed query types and appropriate indexing frameworks and algorithms to efficiently process them. The effectiveness and efficiency of the proposed approaches are evaluated using real datasets.

A Personalized Healthcare Monitoring System for Diabetic Patients by Utilizing BLE-Based Sensors and Real-Time Data Processing.

Current technology provides an efficient way of monitoring the personal health of individuals. Bluetooth Low Energy (BLE)-based sensors can be considered as a solution for monitoring personal vital signs data. In this study, we propose a personalized healthcare monitoring system by utilizing a BLE-based sensor device, real-time data processing, and machine learning-based algorithms to help diabetic patients to better self-manage their chronic condition. BLEs were used to gather users’ vital signs data such as blood pressure, heart rate, weight, and blood glucose (BG) from sensor nodes to smartphones, while real-time data processing was utilized to manage the large amount of continuously generated sensor data. The proposed real-time data processing utilized Apache Kafka as a streaming platform and MongoDB to store the sensor data from the patient. The results show that commercial versions of the BLE-based sensors and the proposed real-time data processing are sufficiently efficient to monitor the vital signs data of diabetic patients. Furthermore, machine learning⁻based classification methods were tested on a diabetes dataset and showed that a Multilayer Perceptron can provide early prediction of diabetes given the user’s sensor data as input. The results also reveal that Long Short-Term Memory can accurately predict the future BG level based on the current sensor data. In addition, the proposed diabetes classification and BG prediction could be combined with personalized diet and physical activity suggestions in order to improve the health quality of patients and to avoid critical conditions in the future.

Editorial: Recent Advances in Deep Learning and Medical Imaging for Cancer Treatment.

In the evolving landscape of medical imaging, the escalating need for deep-learningmethods takes center stage, offering the capability to autonomously acquire abstract datarepresentations crucial for early detection and classification for cancer treatment. Thecomplexities in handling diverse inputs, high-dimensional features, and subtle patternswithin imaging data are acknowledged as significant challenges in this technologicalpursuit. This Special Issue, "Recent Advances in Deep Learning and Medical Imagingfor Cancer Treatment", has attracted 19 high-quality articles that cover state-of-the-artapplications and technical developments of deep learning, medical imaging, automaticdetection, and classification, explainable artificial intelligence-enabled diagnosis for cancertreatment. In the ever-evolving landscape of cancer treatment, five pivotal themes haveemerged as beacons of transformative change. This editorial delves into the realms ofinnovation that are shaping the future of cancer treatment, focusing on five interconnectedthemes: use of artificial intelligence in medical imaging, applications of AI in cancerdiagnosis and treatment, addressing challenges in medical image analysis, advancementsin cancer detection techniques, and innovations in skin cancer classification.

PrecisionLymphoNet: Advancing Malignant Lymphoma Diagnosis via Ensemble Transfer Learning with CNNs.

Malignant lymphoma, which impacts the lymphatic system, presents diverse challenges in accurate diagnosis due to its varied subtypes-chronic lymphocytic leukemia (CLL), follicular lymphoma (FL), and mantle cell lymphoma (MCL). Lymphoma is a form of cancer that begins in the lymphatic system, impacting lymphocytes, which are a specific type of white blood cell. This research addresses these challenges by proposing ensemble and non-ensemble transfer learning models employing pre-trained weights from VGG16, VGG19, DenseNet201, InceptionV3, and Xception. For the ensemble technique, this paper adopts a stack-based ensemble approach. It is a two-level classification approach and best suited for accuracy improvement. Testing on a multiclass dataset of CLL, FL, and MCL reveals exceptional diagnostic accuracy, with DenseNet201, InceptionV3, and Xception exceeding 90% accuracy. The proposed ensemble model, leveraging InceptionV3 and Xception, achieves an outstanding 99% accuracy over 300 epochs, surpassing previous prediction methods. This study demonstrates the feasibility and efficiency of the proposed approach, showcasing its potential in real-world medical applications for precise lymphoma diagnosis.