Morphology Control of Porous Cellulose Particles by Tuning the Surface Tension of Media during Drying.

We previously reported the preparation of cellulose particles by the solvent releasing method (SRM). The obtained cellulose particles had a porous structure filled with a surrounding medium. However, the structure was fragile and easily collapsed because of the capillary pressure as the medium evaporated, resulting in dense cellulose particles. To control the morphology of the cellulose particles in a dry state, we focused our study on the influence of the surface tension of the surrounding medium on the structure of cellulose particles because the capillary pressure is proportional to the surface tension. Different media such as toluene, acetone, and pentane were investigated. The morphologies of the resulting cellulose particles were estimated by volume changes, specific surface areas, and compressive strengths. From these results, as the surface tension of the media filling the particles was lowered, the particle's specific surface area increased, resulting in the formation of softer particles.

Preparation of Cellulose/Silver Composite Particles Having a Recyclable Catalytic Property.

We reported the preparation of porous cellulose particles by the solvent-releasing method, in which a solution of cellulose, dissolved in 1-butyl-3-methylimidazolium chloride and N,N'-dimethylformamide, was dropped into a large amount of 1-butanol using a syringe. The obtained particles had a high specific area because of their porous structure. Herein, to functionalize the cellulose particles, carboxylate groups are introduced into their porous structure by 2,2,6,6-tetramethylpiperidine-1-oxyl-mediated oxidation and ion exchange of carboxylate groups to Ag cations is conducted. Composite cellulose/Ag particles were synthesized by the reduction reaction using the carboxylate groups as a scaffold without free silver nanoparticles in the medium. The obtained composite particles exhibited a high catalytic ability, which was evaluated by examining the reduction of 4-nitrophenol. Moreover, we determined that the catalytic efficiency was maintained for at least three cycles by immobilizing Ag on cellulose particles.

Encapsulation of Either Hydrophilic or Hydrophobic Substances in Spongy Cellulose Particles.

We have reported cellulose particles with a spongy structure that we prepared by the solvent releasing method (SRM) from cellulose droplets composed of cellulose, 1-butyl-3-methylimidazoliumchrolide ([Bmim]Cl), and N,N-dimethylformamide (DMF). The spongy structure collapsed as the medium evaporated, resulting in dense cellulose particles. In this study, we encapsulated the hydrophilic and hydrophobic fluorescent substances in these particles to investigate the use of such particles in potential applications that require encapsulating of substances (e.g., drug delivery). Wet cellulose particles retained their spongy structure in both hydrophobic and hydrophilic media. When the spongy cellulose particles were dispersed in a solution containing nonvolatile solutes, these solutes were driven into the cellulose particles as media evaporated. Subsequently, the cellulose particles collapsed and encapsulated the nonvolatile solutes. Regardless of whether the solute was hydrophilic or hydrophobic, the encapsulation efficiency exceeds 80%. The maximum loading reflected the saturated solubility of solute in solution that filled the cellulose beads. Moreover, the encapsulated solute was released by dispersing the cellulose beads in the solvent, and the rate of release of the encapsulated solute could be controlled by coating the cellulose beads with a conventional polymer.