Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros

Base de dados
País/Região como assunto
Tipo de documento
Intervalo de ano de publicação
1.
J Environ Radioact ; 99(6): 875-81, 2008 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-18162267

RESUMO

Fallout (137)Cs and stable Cs in soils were separated with two extractants (1M CH(3)COONH(4) solution and 0.8M CH(3)COONH(4) in 5% HNO(3) solution after H(2)O(2) oxidization). The residue remaining after removal of the oxidizable organic-bound fraction was separated into the particle-size fractions including clay, silt, fine sand and coarse sand with a sieving and sedimentation method. Then, the concentrations of (137)Cs and stable Cs in the extracted fractions and the particle-size fractions were determined. The (137)Cs contents in the exchangeable and organic-bound fractions in the soil were approximately 10 and 20%, respectively. The (137)Cs content in the strongly bound fraction was about 70%, and the concentration of (137)Cs in the clay was the richest among the particle-size fractions. The specific activity of (137)Cs (concentration ratio of fallout (137)Cs/stable Cs) decreased in the order exchangeable, organic-bound and strongly bound fractions. The data suggest that equilibrium between (137)Cs and stable Cs was not reached among those fractions, even though most of the (137)Cs that had been deposited on the soil was derived from fallout weapons tests that occurred several decades ago. The concentration of (137)Cs among the particle-size fractions in each soil was different, whereas the specific activity of (137)Cs in the particle-size fractions had a relatively similar value.


Assuntos
Poluentes Radioativos do Solo/análise , Solo/análise , Radioisótopos de Césio/análise , Geografia , Japão , Tamanho da Partícula , Monitoramento de Radiação/métodos
2.
Anal Sci ; 22(2): 309-11, 2006 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-16512428

RESUMO

A rapid method for the determination of Pu isotopes in a soil sample within 60 min of starting sample pretreatment was developed. The large reduction in the analysis time was attained by the rapid and perfect digestion of the sample using an alkaline fusion method with an induction heating machine. Pu concentrations were then determined by flow injection/ICP-MS using a solid extraction resin after preconcentration by batch extraction with a chelate resin. The limits of detection for 239Pu and 240Pu were 9.2 fg and 4.3 fg, corresponding to 0.03 and 0.05 Bq kg(-1), respectively, under our analytical conditions, which satisfy the lower detection limits (0.5 Bq kg(-1) of 239Pu, and 2 Bq kg(-1) of 240Pu) required for rapid analysis techniques by the Ministry of Education, Culture, Sports, Science and Technology, Japan. This method provides a powerful and practical technique for emergency monitoring in and around nuclear facilities that handle large amounts of plutonium.

3.
Anal Sci ; 21(3): 205-8, 2005 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-15790099

RESUMO

This paper describes our development of a rapid on-line column/ID-ICP-MS technique for the analysis of plutonium (Pu) in environmental samples using an UTEVA extraction chromatograph resin (UTEVA resin) column. It took only 40 min to separate and measure Pu in the sample solution, including the time for conditioning the resin column for the next analysis. In our method, Pu in a 3 M nitric acid solution was fed to the UTEVA resin, and then eluted from the resin by reducing Pu to Pu(III) with 3 M nitric acid mixed with 0.01 M ascorbic acid after washing the resin. The outflow from the resin column was directly introduced to an ICP-MS system. The low concentration of ascorbic acid and the small volume of the eluting solution (0.6 mL) made successive stable analysis possible without any skimmer cone clogging. The chemical recovery of Pu during column operation was 70%, and typical lower detection limits for 239Pu, 240Pu and 242Pu were 9.2, 4.3 and 7.5 fg (21, 36 and 1.1 microBq), respectively. We analyzed five international standard materials for Pu, and obtained good results.

4.
J Environ Radioact ; 81(2-3): 221-31, 2005.
Artigo em Inglês | MEDLINE | ID: mdl-15795036

RESUMO

The stable Sr content in the aboveground parts of rice plants at various growth stages, and the distributions of 90Sr and stable Sr in rice plant components, such as polished rice, rice bran, hull, straw and root, at harvest time, were determined. The total Sr content in the aboveground rice plants was dependent on the growth stage and followed the sigmoidal shape of the growth curve. The concentration of 90Sr among the different components of rice plants varied within two orders of magnitude, whereas the 90Sr/Sr concentration ratio had a constant value. Therefore, the translocation rate of 90Sr in rice plants had similar values to that of stable Sr. However, the 90Sr/Sr concentration ratio for the rice plants was different for each study site. Only 0.6% of the total Sr was found in polished rice, while more than 99% was found in the non-edible components, of which 87% was present in the straw. These findings suggest that 90Sr in the non-edible parts could have been transferred to humans through the soil-plant system and/or feed-livestock pathway. The soil-to-plant transfer factor of 90Sr in polished rice was 0.0021 +/- 0.00007, which was two orders of magnitude lower than that in the straw. The percentage of 90Sr removed from the upper soil layer to the aboveground biomass of rice plants at harvest time was calculated as 0.094%. It is possible that approximately 0.1% of the total 90Sr content in the surface soil layer is removed from the soil-plant system by human activities every year.


Assuntos
Oryza/química , Poluentes Radioativos do Solo/farmacocinética , Estrôncio/farmacocinética , Folhas de Planta , Raízes de Plantas , Radioisótopos de Estrôncio/farmacocinética
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA