Pathway Complexity in Nanotubular Supramolecular Polymerization: Metal-Organic Nanotubes with a Planar-Chiral Monomer.

Here, we report an anomalous pathway complexity in the supramolecular polymerization of a chiral monomer, which displays an unusual chiroptical feature that does not follow any of the known stereochemical rules such as "chiral self-sorting" and "majority rule". We newly developed a planar-chiral ferrocene-cored tetratopic pyridyl monomer FcL, which underwent AgBF4-mediated supramolecular polymerization to give nanotubes FcNTs composed of metal-organic nanorings FcNRs. Although FcNRs must be homochiral because of a strong geometrical constraint, FcNRs were formed even efficiently from racemic FcL and AgBF4. Detailed studies revealed the presence of two competing pathways for producing homochiral FcNRs as the constituents of FcNTs: (i) spontaneous cyclization of initially formed acyclic polymers -[FcL-Ag+]n- and (ii) template (FcNR)-assisted cyclization via a Ag+···Ag+ metallophilic interaction. The dominance of the two pathways changes depending on the %ee of chiral FcL. Namely, when the %ee of FcL is high, -[FcL-Ag+]n- must contain sufficiently long homochiral sequences that can be readily cyclized into FcNRs. Meanwhile, when the %ee of FcL is low, the homochiral sequences in -[FcL-Ag+]n- must be short and therefore are hardly eligible for spontaneous cyclization. Why were FcNRs formed? Even though the probability is very low, homochiral -[FcL-Ag+]n- can be statistically generated and undergo spontaneous cyclization to give FcNRs minutely. We found that FcNRs can be amplified by heterochirally templating their own synthesis using metallophilic interaction. Because of this stereochemical preference, the growth of FcNRs into FcNTs via the template-assisted mechanism occurs only when both (R,R)FcL and (S,S)FcL are present in the polymerization system.

Simulating Assembly Landscapes for Comprehensive Understanding of Supramolecular Polymer-Solvent Systems.

Complexity in supramolecular polymer systems arises from interactions between different components, including solvent molecules. By varying their concentration or temperature in such multicomponent systems, complex phenomena can occur such as thermally bisignate and dilution-induced assembly of supramolecular polymers. Herein, we demonstrate that both these phenomena emerge from the same underlying interaction mechanism between the components. As a model system, amide-decorated supramolecular polymers of porphyrins were investigated in combination with aliphatic alcohols as hydrogen-bond scavengers, and thermodynamic mass-balance models were applied to map the three-dimensional assembly landscapes. These studies unveiled that the interaction between hydrogen-bond scavengers and monomers is temperature-dependent and becomes dominant at high monomer concentrations. With these insights, we could exploit competitive monomer-alcohol interactions to prompt the dilution-induced assembly of various common monomers as well as bisignate assembly events. Moreover, kinetic insights were obtained by navigating through the assembly landscape. Similar to phase diagrams of covalent polymers, these assembly landscapes provide a comprehensive picture of supramolecular polymerizations, which helps to precisely regulate the system properties. The generality of this approach using assembly landscapes makes it relevant for any supramolecular system, and this enhanced control will open the door to build complex and functional supramolecular polymer systems.

Blending to Make Nonhealable Polymers Healable: Nanophase Separation Observed by CP/MAS 13 C NMR Analysis.

Can commodity polymers are made to be healable just by blending with self-healable polymers? Here we report the first study on the fundamental aspect of this practically challenging issue. Poly(ether thiourea) (PTUEG3 ; Tg =27 °C) reported in 2018 is extraordinary in that it is mechanically robust but can self-heal even at 12 °C. In contrast, poly(octamethylene thiourea) (PTUC8 ; Tg =50 °C), an analogue of PTUEG3 , cannot heal below 92 °C. We found that their polymer blend self-healed in a temperature range above 32 °C even when its PTUEG3 content was only 20 mol %. Unlike PTUEG3 alone, this polymer blend, upon exposure to high humidity, barely plasticized, keeping its excellent mechanical properties due to the non-hygroscopic nature of the PTUC8 component. CP/MAS 13 C NMR analysis revealed that the polymer blend was nanophase-separated, which possibly accounts for why such a small amount of PTUEG3 provided the polymer blend with humidity-tolerant self-healable properties.

Supramolecular Polymerization of a Photo-Fluttering Chiral Monomer: A Temporarily Suspendable Chain Growth by Light.

Using a photochemically fluttering thiophene-fused cyclooctatetraene derivative (COT) as a nonplanar chiral monomer, we have succeeded in remotely suspending the supramolecular polymerization in a temporal manner by a completely new strategy. The COT monomer with an 8π electron core adopts a saddle shape in the ground state and flutters 5.8 × 103 times faster upon photoirradiation than in the dark as a result of the stabilized planar conformation by the excited-state aromaticity (Baird aromaticity). Detailed investigation revealed that without photoirradiation the rate constant of the fluttering motion is 1/560 times smaller than that of the chain elongation, indicating that the fluttering of COT does not affect the chain elongation in the dark. In contrast, under photoirradiation (365 nm), the fluttering of COT is at least 11 times more rapid than the chain elongation, thereby suppressing the elongation event. The rapid fluttering of COT to suspend the chain elongation is not accompanied by a decrease in active monomer concentration, leading to depolymerization.

Mechanically Robust, Self-Healable Polymers Usable under High Humidity: Humidity-Tolerant Noncovalent Cross-Linking Strategy.

Although mechanically robust polymer materials had not been thought to self-heal, we recently found that poly(ether thiourea) PTUEG3, which is a glassy polymer with high mechanical strength, self-heals even at ambient temperatures. This finding updated the above preconception. Nevertheless, it should also be noted that PTUEG3, under high humidity, absorbs water and is plasticized to lose its mechanical strength. Humidity-induced plasticization is a general problem for polymers with polar groups. Herein, we report that PTUEG3, if designed by copolymerization to contain only 10 mol % of a dicyclohexylmethane (Cy2M) thiourea unit (TUCy2M), serves as a humidity-tolerant, mechanically robust polymer material that can self-heal at ambient temperatures. This copolymer contained, in its ether thiourea (TUEG3)-rich domain, a humidity-tolerant, noncovalently cross-linked 3D network with mechanical robustness formed by stacking of the Cy2M group. The present work provides a promising design strategy for mechanically robust, self-healable polymers usable under high humidity.

Alternating Heterochiral Supramolecular Copolymerization.

In stacking-based supramolecular polymerization, chiral hydrogen bonding (H-bonding) monomers often prefer to adapt a homochiral monomer sequence. Herein, we investigated the polymerization of a chiral thiophene-fused cyclooctatetraene (COT) as a novel nonplanar-core monomer and found the first example of the formation of an alternating heterochiral supramolecular copolymer. Although single enantiomer (-) or (+)-COT alone did not polymerize, when (-) and (+)-COT were mixed together, supramolecular polymerization took place to give a stereochemically alternating copolymer. By means of the microcrystal electron crystallography of a shorter side-chained COT analogue, we found that the resulting heterochiral supramolecular copolymer adapted an alternating arrangement of H-bonded and polar π-stacked parts. A computational study using density-functional theory (DFT) suggested that such an alternating heterochiral preference occurs because it allows two thiophene amide moieties facing each other to effectively cancel their in-plane dipole moments.

Bio-adhesive Nanoporous Module: Toward Autonomous Gating.

Here we report a bio-adhesive porous organic module (Glue COF) composed of hexagonally packed 1D nanopores based on a covalent organic framework. The nanopores are densely decorated with guanidinium ion (Gu+ ) pendants capable of forming salt bridges with oxyanionic species. Glue COF strongly adheres to biopolymers through multivalent salt-bridging interactions with their ubiquitous oxyanionic species. By taking advantage of its strong bio-adhesive nature, we succeeded in creating a gate that possibly opens the nanopores through a selective interaction with a reporter chemical and releases guest molecules. We chose calmodulin (CaM) as a gating component that can stably entrap a loaded guest, sulforhodamine B (SRB), within the nanopores (CaM COF⊃SRB). CaM is known to change its conformation on binding with Ca2+ ions. We confirmed that mixing CaM COF⊃SRB with Ca2+ resulted in the release of SRB from the nanopores, whereas the use of weakly binding Mg2+ ions resulted in a much slower release of SRB.

Supramolecular Polymerization in Liquid Crystalline Media: Toward Modular Synthesis of Multifunctional Core-Shell Columnar Liquid Crystals.

Recently, we discovered a modular synthetic approach for constructing core-shell columnar liquid crystals (LCs) by supramolecular polymerization in LC media. In the present work, we successfully confirmed that our modular synthetic approach has the potential to be widely extended to the development of multifunctional columnar LCs. Herein, we constructed the first core-shell columnar LC that was proved to be orientable by both electric and magnetic fields by the supramolecular polymerization of NODiskNH* in a nematic LC medium of 4-cyano-4'-pentyloxybiphenyl (5OCB). NODiskNH* is a chiral benzenetricarboxamide derivative bearing 2,2,6,6-tetramethylpiperidine 1-oxyl termini, which is known to form a helical supramolecular polymer via a triple hydrogen-bonding array. NODiskNH* alone formed a hydrogen-bonded liquid phase without any long-range structural ordering. However, a nematic LC medium of 5OCB, when mixed with NODiskNH* at a molar ratio of 1:3, underwent a "structural order-increasing" mesophase transition, affording an optically active single LC phase with a hexagonally arranged core-shell columnar geometry in a temperature range from 113 to 51 °C. Unprecedentedly, this core-shell columnar LC can orient its columns both electrically and magnetically, resulting in unidirectional columnar ordering.

Redox-Responsive Chiral Dopant for Quick Electrochemical Color Modulation of Cholesteric Liquid Crystal.

Here, we report the first redox-active chiral dopant FcD, which electrically alters its helical twisting power (HTP) for a cholesteric liquid crystalline (LC) medium and quickly changes the reflection color. FcD is composed of an axially chiral binaphthyl unit in conjunction with a redox-active ferrocene unit. A cholesteric LC phase of 4'-pentyloxy-4-cyanobiphenyl, doped with FcD (3.0 mol %), developed a blue reflection color. When nitrosyl tetrafluoroborate, a one-electron oxidant, was added to this cholesteric LC phase, FcD was oxidized to decrease its original HTP value by 13%, so that a green reflection color was developed. In the presence of a supporting electrolyte, the reflection color was electrochemically modulated using a sandwich-type glass cell with indium tin oxide electrodes. In quick response to the applied voltage of +1.5 V, the reflection color changed from blue to green within 0.4 s. When 0 V was applied, the reflection color returned to its original blue color. The FcD-doped cholesteric LC is characterized by its fastest electrochemical response and lowest operating voltage among those reported for electrically driven cholesteric LC devices.

Exceptionally High Electric Double Layer Capacitances of Oligomeric Ionic Liquids.

Electric double layer (EDL) capacitors are promising as next-generation energy accumulators if their capacitances and operation voltages are both high. However, only few electrolytes can simultaneously fulfill these two requisites. Here we report that an oligomeric ionic liquid such as IL4TFSI with four imidazolium ion units in its structure provides a wide electrochemical window of ∼5.0 V, similar to monomeric ionic liquids. Furthermore, electrochemical impedance measurements using Au working electrodes demonstrated that IL4TFSI exhibits an exceptionally high EDL capacitance of ∼66 µF/cm2, which is ∼6 times as high as those of monomeric ionic liquids so far reported. We also found that an EDL-based field effect transistor (FET) using IL4TFSI as a gate dielectric material and SrTiO3 as a channel material displays a very sharp transfer curve with an enhanced carrier accumulation capability of ∼64 µF/cm2, as determined by Hall-effect measurements.

C5-symmetric chiral corannulenes: desymmetrization of bowl inversion equilibrium via "intramolecular" hydrogen-bonding network.

Because of a rapid conformational inversion, bowl-shaped C5-symmetric corannulenes, though geometrically chiral, have not been directly resolved into their enantiomers. However, if this inversion equilibrium can be desymmetrized, chiral corannulenes enriched in either enantiomer can be obtained. We demonstrated this possibility using pentasubstituted corannulenes 4 and 5 carrying amide-appended thioalkyl side chains. Compound 4 displays chiroptical activity in a chiral hydrocarbon such as limonene. Because compound 5 carries a chiral center in the side chains, its enantiomers 5R and 5S show chiroptical activity even in achiral solvents such as CHCl3 and methylcyclohexane. In sharp contrast, when the side chains bear no amide functionality (1 and 2R), no chiroptical activity emerges even in limonene or with a chiral center in the side chains. Detailed investigations revealed that the peripheral amide units in 4 and 5 are hydrogen-bonded only "intramolecularly" along the corannulene periphery, affording cyclic amide networks with clockwise and anticlockwise geometries. Although this networking gives rise to four stereoisomers, only two, which are enantiomeric to one another, are suggested computationally to exist in the equilibrated system. In a chiral environment (chiral solvent or side chain), their thermodynamic stabilities are certainly unequal, so the bowl-inversion equilibrium can be desymmetrized. However, this is not the case when the system contains a protic solvent that can deteriorate the hydrogen-bonding network. When the enantiomeric purity of limonene as the solvent is varied, the chiroptical activity of the corannulene core changes nonlinearly with its enantiomeric excess (majority rule).

Supramolecular copolymerization of hydrophobic and hydrophilic monomers in liquid crystalline media.

In the case of covalent polymers, immiscible polymers can be integrated by covalently linking them together, but such a strategy is not possible in supramolecular polymers. Here we report the supramolecular copolymerization of two porphyrin-based monomers, C10P2H and TEGPCu with side chains bearing cyanobiphenyl (CB) groups at the ends of hydrophobic alkyl or hydrophilic tetraethylene glycol chains, respectively. These monomers undergo self-sorting supramolecular polymerization in highly diluted solutions ([monomer] = 3.4 × 10-9 mol% (2.0 × 10-8 mol L-1)) in nonpolar media due to the incompatibility of the side chains. Surprisingly, these monomers undergo supramolecular copolymerization under high concentration conditions ([monomer] = 7.7 mol%) in the medium of 4-cyano-4'-pentyloxybiphenyl (5OCB) to form a columnar liquid crystalline phase under thermodynamic conditions, where the individual columns are composed of supramolecular block copolymers. The combination of CB ends of both monomers and the 5OCB medium is essential for the two monomers to form an integrated structure in a condensed system without phase separation.

Theoretical study on the regioselectivity of Baeyer-Villiger Reaction of α-Me-, -F-, -CF3-cyclohexanones.

The origin of the regioselectivity of the Baeyer-Villiger reaction of α-Me-, -F-, and -CF(3)-cyclohexanones was investigated theoretically (MPWB1K/6-311++G**-PCM(CH(2)Cl(2))//MPWB1K/6-311G**-Onsager(CH(2)Cl(2))). Investigation of the energy profiles of the rearrangement step revealed the reality of the importance of conventional migratory aptitude based on the stabilization capability of partial positive charge generated during the migration step. We have divided the origin of the regioselectivity into two factors: (1) structural stability (steric repulsion, dipole interaction, etc.) and kinetic reactivity (energy barrier from the intermediate, i.e., cation stabilization capability). For α-CF(3)-cyclohexanone, the migration tendency was mostly dependent on the kinetic reactivity; CF(3) substitution greatly increased the energy barrier. Noteworthy is the orientation of the CF(3) group at the transition state. The CF(3) group possessed the axial orientation overcoming the 1,3-diaxial repulsion, probably because of the strong dipole interaction between the CF(3) group and the leaving acid moiety. Striking results in the case of α-F- and -Me-cyclohexanone were that no difference in the energy barriers by the substituents could be observed. Especially in the case of α-Me substitution, structural stability operates in determining the most stable transition state, which is in contrast to the conventional understanding of the migratory aptitude based on the ability to stabilize partial positive charge.

Cu-catalyzed trifluoromethylation of aryl iodides with trifluoromethylzinc reagent prepared in situ from trifluoromethyl iodide.

The trifluoromethylation of aryl iodides catalyzed by copper(I) salt with trifluoromethylzinc reagent prepared in situ from trifluoromethyl iodide and Zn dust was accomplished. The catalytic reactions proceeded under mild reaction conditions, providing the corresponding aromatic trifluoromethylated products in moderate to high yields. The advantage of this method is that additives such as metal fluoride (MF), which are indispensable to activate silyl groups for transmetallation in the corresponding reactions catalyzed by copper salt by using the Ruppert-Prakash reagents (CF3SiR3), are not required.

Anomalous Chiral Transfer: Supramolecular Polymerization in a Chiral Medium of a Mesogenic Molecule.

Here, we report a medium-to-polymer anomalous chiral transfer in the supramolecular polymerization of a tetraphenylporphyrin-based achiral hydrogen-bonding monomer (TPP) in a chiral medium of 5-cyanobiphenyl CB*. A mixture of TPP in (R)-CB* ([TPP]=7.7 mol %) at 40 °C gave a columnar oblique LC mesophase, where the individual columns were composed of an optically active helical supramolecular polymer of TPP as a consequence of a successful medium-to-polymer chiral transfer. Meanwhile, upon dilution of CB* with achiral 5-cyanobiphenyl CB, the optical activity of the system showed an anomalous bell-shaped dependency on the composition of CB*/CB, where the gabs value of 0.049 at CB*/CB=50/50 was 6.0 times larger than the gabs value of CB* alone. Such anomalous chiroptical amplification in CD is most likely due to a change in the stacking geometry of TPP in the oblique columnar LC upon lateral compression.

Ultrafast water permeation through nanochannels with a densely fluorous interior surface.

Ultrafast water permeation in aquaporins is promoted by their hydrophobic interior surface. Polytetrafluoroethylene has a dense fluorine surface, leading to its strong water repellence. We report a series of fluorous oligoamide nanorings with interior diameters ranging from 0.9 to 1.9 nanometers. These nanorings undergo supramolecular polymerization in phospholipid bilayer membranes to form fluorous nanochannels, the interior walls of which are densely covered with fluorine atoms. The nanochannel with the smallest diameter exhibits a water permeation flux that is two orders of magnitude greater than those of aquaporins and carbon nanotubes. The proposed nanochannel exhibits negligible chloride ion (Cl-) permeability caused by a powerful electrostatic barrier provided by the electrostatically negative fluorous interior surface. Thus, this nanochannel is expected to show nearly perfect salt reflectance for desalination.

Columnarly assembled liquid-crystalline peptidic macrocycles unidirectionally orientable over a large area by an electric field.

Being inspired by naturally occurring peptidic macrocycles, we developed liquid-crystalline (LC) compounds 1 and 2 that are capable of self-assembling into hexagonal columnar mesophases over a wide temperature range that includes room temperature. Their bowl-shaped macrocyclic cores are conformationally robust because of the presence of internal H-bonds, while the columnar assembly is ensured by intermolecular H-bonding interactions involving the exocyclic amide units. When an electric field was applied to their LC films from a direction orthogonal to the film plane, the columns were oriented homeotropically over a large area.

Anomalously Slow Conformational Change Dynamics of Polar Groups Anchored to Hydrophobic Surfaces in Aqueous Media.

Water molecules within a thin hydration layer, spontaneously generated on hydrophobic protein surfaces, are reported to form a poorly dynamic network structure. However, how such a water network affects the conformational change dynamics of polar groups has never been explored, although such polar groups play a critical role in protein-protein and protein-ligand interactions. In the present work, we utilized as model protein surfaces a series of self-assembled monolayers (SAMs) appended with polar (Fmoc) or ionic (FITC) fluorescent head groups that were tethered via a 1.5-nm-long flexible oligoether chain to a hydrophobic silicon wafer surface, which was densely covered with paraffinic chains. We found that, not only in deionized water but also in aqueous buffer, these oligoether-appended head groups at ambient temperatures both displayed an anomalously slow conformational change, which required ∼10 h to reach a thermodynamically equilibrated state. We suppose that these behaviors reflect the poorly dynamic and low-permittivity natures of the thin hydration layer.

An Electrochemical Cholesteric Liquid Crystalline Device for Quick and Low-Voltage Color Modulation.

We demonstrate a method for fabricating a prototype reflective display device that contains cholesteric liquid crystal (LC) as an active component. The cholesteric LC is composed of a nematic LC 4'-pentyloxy-4-cyanobiphenyl (5OCB), redox-responsive chiral dopant (FcD), and a supporting electrolyte 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (EMIm-OTf). The most important component is FcD. This molecule changes its helical twisting power (HTP) value in response to redox reactions. Therefore, in situ electrochemical redox reactions in the LC mixture allow for the device to change its reflection color in response to electrical stimuli. The LC mixture was introduced, by a capillary action, into a sandwich-type ITO glass cell comprising two glass slides with patterned indium tin oxide (ITO) electrodes, one of which was coated with poly(3,4-ethylenedioxythiophene)-co-poly(ethylene glycol) doped with perchlorate (PEDOT+). Upon application of +1.5 V, the reflection color of the device changed from blue (467 nm) to green (485 nm) in 0.4 s. Subsequent application of 0 V made the device recover the original blue color in 2.7 s. This device is characterized by its fastest electrical response and lowest operating voltage among any previously reported cholesteric LC device. This device could pave the way for the development of next generation reflective displays with low energy consumption rates.

Nematic-to-columnar mesophase transition by in situ supramolecular polymerization.

Disk- and rod-shaped molecules are incompatible in coassembly, as the former tend to stack one-dimensionally whereas the latter tend to align in parallel. Because this type of incompatibility can be more pronounced in condensed phases, different-shaped molecules generally exclude one another. We report that supramolecular polymerization of a disk-shaped chiral monomer in nematic liquid crystals comprising rod-shaped molecules results in order-increasing mesophase transition into a single mesophase with a core-shell columnar geometry. This liquid crystalline material responds quickly to an applied electric field, resulting in unidirectional columnar ordering. Moreover, it can be modularly customized to be optoelectrically responsive simply by using a photoisomerizable rod-shaped module. The modular strategy allows for cooperative integration of different functions into elaborate dynamic architectures.