RESUMO
OBJECTIVES: The aim of this study was to determine whether a clamped drill guide can be used effectively to drill across equine distal third metacarpals and metatarsals and to compare accuracy and speed of a drilling with a hand-held drill guide. STUDY DESIGN: Eighty equine cadaver limbs were divided between four surgeons with varying experience. The limbs were randomly allocated to clamped or hand-held drill guides and placed in a stand in an upright/standing position on a metal table. Drilling times from cis- to trans cortices were measured. Post-drilling computed tomography images were used to assess drilling deviations in the dorsopalmar and proximodistal directions. RESULTS: Mean proximodistal deviation of the drill hole was distad for both guides and significantly (p = 0.01) less for the clamped drill guide +0.35° (range: -5.42°, +6.61°, standard deviation [SD] ± 3.18°) than the hand-held drill guide +2.05° (range: -5.24°, +9.81°, SD ± 3.69°). Mean dorsopalmar/plantar deviation was non-significantly (p = 0.17) less for the clamped drill guide -0.27° (range: -9.72°, +6.58°, SD ± 3.57°) than the hand-held drill guide +0.60° (range: -9.74°, + 12.33°, SD ± 4.51°). Mean time taken to drill from cis to trans cortex was significantly (p < 0.001) shorter with the clamped drill guide (41.2s) than the hand-held guide (56.6s). CONCLUSION: The clamped drill guide could be used successfully on the equine distal third metacarpals and metatarsals and resulted in some improved accuracy and reduced drilling time compared with the hand-held guide. The use of the clamped drill guide in vivo could be supported. This may be of benefit for certain fracture repairs in equids.