RESUMO
A general synthetic strategy for the systematic synthesis of group 4 MIV heterometallic complexes LMIII(H)(µ-O)Si(µ-O)(OtBu)2}nMIV(NR2)4-n (L = {[HC{C(Me)N(2,6-iPr2C6H3)}2; MIII = Al or Ga; n = 1 or 2; MIV = Ti, Zr, Hf; R = Me, Et), based on alumo- or gallosilicate hydride ligands bearing a Si-OH moiety, is presented. The challenging isolation of these metalloligands involved two strategies. On the one hand, the acid-base reaction of LAlH2 with (HO)2Si(OtBu)2 yielded LAlH(µ-O)Si(OH)(OtBu)2 (1), while on the other hand, the oxidative addition of (HO)2Si(OtBu)2 to LGa produced the gallium analog (2). These metalloligands successfully stabilized two hydrogen atoms with different acid-base properties (MIII-H and SiO-H) in the same molecule. Reactivity studies between 1 and 2 and group 4 amides MIV(NR2)4 (MIV = Ti, Zr, Hf; R = Me, Et) and tuning the reactions conditions and stoichiometry led to isolation and structural characterization of heterometallic complexes 3-11 with a 1:1 or 2:1 metalloligand/MIV ratio. Notably, some of these molecular heterometallic silicate complexes stabilize for the first time terminal (O3Si-O-)MIV(NR2)3 moieties known from single-site silica-grafted species. Furthermore, the aluminum-containing heterometallic complexes possess Al-H vibrational energies similar to those reported for modified alumina surfaces, which makes them potentially suitable models for the proposed MIV species grafted onto silica/alumina surfaces with hydride and dihydride architectures.
RESUMO
Although benzene and borazine are isoelectronic and isostructural, they have very different electronic structures, mainly due to the polar nature of the B-N bond. Herein, we present an experimental study of the charge density distribution obtained from the multipole model formalism and Hirshfeld atom refinement (HAR) based on high-resolution X-ray diffraction data of borazine B3N3H6 (1) and B,B',Bâ³-trichloroborazine (2) crystals. These data are compared to those obtained from HAR for benzene (4) and 1,3,5-trichlorobenzene (5) and further compared with values obtained from density functional theory calculations in the gas phase, where N,N',Nâ³-trichloroborazine (3) was also included. The results confirm that, unlike benzene, borazines are only weakly aromatic with an island-like electronic delocalization within the B3N3 ring involving only the nitrogen atoms. Furthermore, delocalization indices and interacting quantum atom energy for bonded and non-bonded atoms were found to be highly suitable indicators capable of describing the origin of the discrepancies observed when the degree of aromaticity in 2 and 3 is evaluated using common aromaticity indices. Additionally, analysis of intermolecular interactions in the crystals brings further evidence of a weakly aromatic character of the borazines as it reveals surprising similarities between the crystal packing of borazine and benzene and also between B,B',Bâ³-trichloroborazine and 1,3,5-trichlorobenzene.
RESUMO
A combined experimental and theoretical study of the biphenyl (BP) crystal is presented. The X-ray diffraction data collected at 100â K were subjected to Hirshfeld atom and multipole refinements of the electron density, ρ(r). A theoretical exploration of the potential energy surface (PES) of the crystal was also carried out. This investigation challenges the common assumption that the planar structure of BP in the phase I crystal is an average of two twisted configurations in a double-well potential. The theoretical computations provide compelling evidence that this structure corresponds to a minimum on the PES hence to a stable molecular arrangement. Consistently, the experiment showed no evidence of positional or dynamic disorder. The intramolecular hydrogen-hydrogen bonds detected are not repulsive. The topological analysis of the experimental and theoretical ρ(r) reveals that both the intra- and intermolecular Hâ â â H and the C-Hâ â â π contacts stabilize the BP crystal.
RESUMO
We report the first experimental investigation of porous organic cages (POCs) for the demanding challenge of SO2 capture. Three structurally related N-containing cage molecular materials were studied. An imine-functionalized POC (CC3) showed modest and reversible SO2 capture, while a secondary-amine POC (RCC3) exhibited high but irreversible SO2 capture. A tertiary amine POC (6FT-RCC3) demonstrated very high SO2 capture (13.78â mmol g-1 ; 16.4 SO2 molecules per cage) combined with excellent reversibility for at least 50 adsorption-desorption cycles. The adsorption behavior was investigated by FTIR spectroscopy, 13 Câ CP-MAS NMR experiments, and computational calculations.
RESUMO
The molecular alumosilicates AlL{OSi(OtBu)2O}[OSi{(µ3-O)(MR2)2(µ-OtBu)}(OtBu)] (L = HC[CMeNAr]2-, where M = Al, R = Me (2), Et (3), and iBu (4) and M = Ga, R = Me (5)) were obtained from the reaction of AlL{OSi(OtBu)2(OH)}2 (1) with 1 or 2 equiv of the respective organometallic precursor. These compounds have a central bicyclic inorganic core formed by a six-membered AlSi2O3 alumosilicate ring with a Si-O-Si unit connected via a Si-O bond to a four-membered Al2O2 alumoxane ring. These compounds are formed even though 1 is specifically designed to yield 4R alumosilicate rings that would obey the Löweinstein's and Dempsey's rules about concatenation between silicon and aluminum tetrahedra in alumosilicates. We propose a mechanism for this rearrangement, based on the experimental evidence and density functional theory calculations, that involves a κ3µ2 coordination of a silicate unit to two AlMe2 groups, which weakens one Si-O bond and explains how aluminum atoms can cleave Si-O bonds. Furthermore, formation of the products experimentally confirms the theory that Al-O-Al groups can exist in alumosilicates if the oxygen atom belongs to an OH moiety.
RESUMO
The molecular meso-metallaporphyrin has been obtained from the reaction of AlMe3 with the bulky 4,5-(Ph2(HO)C)2-1,2,3-triazole (1). The presence of Al-Me groups coordinated to the triazole rings creates three different stereoisomers that were identified by single-crystal X-ray diffraction. Further studies revealed that, for steric reasons, only one of the two main stereoisomers is active in the polymerization of ε-caprolactone. When GaMe3 is used instead of AlMe3, a trimetallic species is formed instead of the meso-metallaporphyrin pointing to a metal-directed self-assembly. On the other hand, the reaction of the monolithium salt [{Li(THF)2}{κ2- N, N'-4,5-(Ph2(HO)C)-1,2,3-triazole}]2 (2; THF = tetrahydrofuran) with MCl3 (M = Al, Ga) yields meso-metallaporphyrin species with a lithium atom in the center of the metallacycle. While the gallium derivative is rather stable in solution, the aluminum analogue decomposes rapidly. In the solid state, continuous cationic columns running throughout the whole crystal are formed from alternating Liâ[M]4 (M = Al, Ga) meso-metallaporphyrin and [Li(THF)4]+ cations. Density functional theory calculations determined that the weak Cl···H, H···H, N···H, and Cl···O interactions with a total interaction energy of -38.6 kcal·mol-1 are responsible for this unusual packing.
RESUMO
Experimental charge density studies of hexachloro-cyclo-triphosphazene (1) and the boat conformation of octachloro-cyclo-tetraphosphazene (2 a) were performed to unambiguously describe the origin of the electron delocalization in the P3 N3 ring in 1. The obtained results were compared to DFT studies in the solid state and the gas phase. Electron density analysis revealed a highly polarized nature of the P-N bonds and a modular structure of the P3 N3 and P4 N4 rings, which can be separated into independent Cl2 PN units with a perfect transferability between the compounds. Further analysis of the source function experimentally proves the presence of negative hyperconjugation involving both out-of-plane and in-plane nitrogen electrons as well as electrons of the chlorine atoms. Finally, these results discard the presence of pseudoaromatic delocalization in the nearly planar P3 N3 ring.
RESUMO
The reaction of metalloxanes [{MeLM(OH)}2(µ-O)] [M = Al (1), Ga (2); MeL = CH{CMe(NAr)}2-, Ar = 2,4,6-Me3C6H2, Me = methyl] with an excess of BH3·D (D = tetrahydrofuran (THF), SMe2) affords annular metallaborate systems achieved through M-O-M cleavage. Compound 1 led exclusively to the formation of eight-membered ring systems [{MeLAl(µ-O){B(OnBu)}(µ-O)}2] (3) and [{MeLAl(µ-O)(BH)(µ-O)}2] (6), while for 2 the unprecedented six-membered ring systems [{(MeLGa)2(µ-O)}(µ-O)2{B(OnBu)}] (4) and [(MeLGa)(µ-O)2{(BOnBu)2(µ-O)}] (5) were observed. The use of BH3·THF with 1 and 2 led to the concomitant THF ring-opening reaction, while with BH3·SMe2 in THF no such reaction was observed. The metallaborates [MeLAl{OB(pinacol)}(OH)] (7) and [{MeLGa(OB(pinacol))}2(µ-O)] (8) were synthesized from pinacolborane and the corresponding metalloxane, providing structural evidence that supports the reaction pathways proposed for the formation of 3-6. Density functional theory studies were performed on 3-5 to assess the effect of the metal exchange between aluminum and gallium atoms on the energy of the general ring structures.
RESUMO
The bottleneck effect of confined N,N-dimethylformamide (DMF) molecules was observed in InOF-1 for the first time: CO2 capture was remarkably enhanced in samples of as-synthesized InOF-1, thermally activated in such a way that a small residual amount of DMF molecules remained confined within the pores (DMF@InOF-1). Dynamic CO2 adsorption experiments on DMF@InOF-1 exhibited a CO2 capture of 8.06 wt % [1.5-fold higher than that of a fully activated InOF-1 (5.24%)]. DMF@InOF-1 can reversibly adsorb/desorb 8.09% CO2 with no loss of CO2 capacity after 10 cycles, and the desorption is accomplished by only turning the CO2 flow off. Static CO2 adsorption experiments (at 196 K) demonstrated a 1.4-fold CO2 capture increase (from 5.5 mmol·g-1, fully activated InOF-1, to 7.5 mmol·g-1, DMF@InOF-1). Therefore, these CO2 capture properties are the result of the presence of residual-confined DMF molecules within the InOF-1 framework and their interactions via a very strong hydrogen bond with the In2(µ-OH) groups, which prevent DMF leaching. The stability of this hydrogen bond is given by a perfect fit of the DMF molecule in the "dent" around the OH group that allows a nearly ideal orientation of the DMF molecule towards the OH group.
RESUMO
A series of borosilicates was synthesized, where the structure of the borosilicate core was easily modulated using two strategies: blocking of condensation sites and controlling the stoichiometry of the reaction. Thus, on the one hand, the condensation of phenylboronic or 3-hydroxyphenylboronic acid with diacetoxysilylalkoxide [(tBuO)(Ph3CO)Si(OAc)2] led to the formation of borosilicates (tBuO)(Ph3CO)Si{(µ-O)BPh}2(µ-O) (1), [{(tBuO)(Ph3CO)Si(µ-O)BPh(µ-O)}2] (2), and [{(tBuO)(Ph3CO)Si(µ-O)B(3-HOPh)(µ-O)}2] (3) with a cyclic inorganic B2SiO3 or B2Si2O4 core, respectively. On the other hand, the reaction of phenylboronic acid with triacetoxysilylalkoxide (Ph3CO)Si(OAc)3 in 3:2 ratio resulted in the formation of a cagelike structure [{(Ph3CO)Si(µ-O)2BPh(µ-O)}2] (4) with B4Si4O10 core, while the reaction of the boronic acid with silicon tetraacetate generated an unusual 1,3-bis(acetate)-1,3-diphenyldiboraxane PhB(µ-O)(µ-O,O'-OAc)2BPh (5). Additionally, compound 1 was used to evaluate the possibility to form NâB donor-acceptor bond between the boron atom in the borosilicates and a nitrogen donor. Thus, coordination of 1 with piperazine yielded a tricyclic [{(tBuO)(Ph3CO)Si(OBPh)2(µ-O)}2·C4H10N2] compound 6 with two borosilicate rings bridged by a piperazine molecule. Finally, the processes involved in the formation of the six- and eight-membered rings (B2SiO3 and B2Si2O4) in compounds 1 and 2 were explored using solution 1H NMR studies and density functional theory calculations. These molecules represent to the best of our knowledge first examples of cyclic molecular borosilicates containing SiO4 units.
RESUMO
The reaction of (SeO3)4 with 1,4-dioxane (diox, dioxane) with or without diluting solvent led to the isolation of the unprecedented esters of selenic acid-1,2-ethyl selenate (CH2O)2SeO2 and the glyoxal diselenate O2Se[(OCHO)2]SeO2. It was possible to isolate an unknown dimeric form of Se2O5 (Se4O10·(diox)2) and a geometrical isomer of the mixed-valence oxide trans-Se3O7, both stabilized by dioxane. The dioxane adduct of monomeric selenium trioxide SeO3·diox was obtained from the reaction of (SeO3)4 with dioxane in liquid SO2. The reaction mechanism for the formation of these compounds was elucidated, and the molecular structure of the unstable form of the selenium trioxide was determined, consisting in a trimeric arrangement (SeO3)3.
Assuntos
Dioxanos/química , Ésteres/química , Ácido Selênico/química , Óxidos de Selênio/química , Ciclização , Isomerismo , Modelos Moleculares , Oxirredução , Dióxido de Enxofre/químicaRESUMO
A series of organotin heterocycles of general formula [{Me2C(C6H3CH2)2O}SnR2] [R = methyl (Me, 4), n-butyl (n-Bu, 5), benzyl (Bn, 6) and phenyl (Ph, 7)] was easily synthesized by a Barbier-type reaction assisted by the sonochemical activation of metallic magnesium. The 119Sn{1H} NMR data for all four compounds confirm the presence of a central Sn atom in a four-coordinated environment in solution. Single-crystal X-ray diffraction studies for 17,17-dimethyl-7,7-diphenyl-15-oxa-7-stannatetracyclo[11.3.1.05,16.09,14]heptadeca-1,3,5(16),9(14),10,12-hexaene, [Sn(C6H5)2(C17H16O)], 7, at 100 and 295â K confirmed the formation of a mononuclear eight-membered heterocycle, with a conformation depicted as boat-chair, resulting in a weak Sn...O interaction. The Sn and O atoms are surrounded by hydrophobic C-H bonds. A Hirshfeld surface analysis of 7 showed that the eight-membered heterocycles are linked by weak C-H...π, π-π and H...H noncovalent interactions. The pairwise interaction energies showed that the cohesion between the heterocycles are mainly due to dispersion forces.
RESUMO
Controlled hydrolysis of (Me)LGaCl2 ((Me)L = HC[(CMe)N(2,4,6-Me3C6H2)]2(-)) (1) in the presence of a N-heterocyclic carbene, as a HCl acceptor, led to the unprecedented molecular galloxane dihydroxide [{(Me)LGa(OH)}2(µ-O)] (2) in high yield. Compound 2 was used in the assembly of the heterobimetallic galloxanes with group 4 metals [{((Me)LGa)2(µ-O)}(µ-O)2{M(NR2)2}] (M = Ti, R = Me (6); M = Zr (7), Hf (8), R = Et).
RESUMO
Syntheses of the heavy chalcogen-containing alumoxanes [(Me)LAl(SeH)]2(µ-O) (4) and ((Me)LAl)2(µ-Te)(µ-O) (7) were accomplished by the reaction of ((Me)LAlH)2(µ-O) (2; (Me)L = HC[(CMe)N(2,4,6-Me3C6H2)]2(-)) with either red selenium or metallic tellurium. The aluminum hydrogenselenide [(Me)LAl(SeH)]2(µ-Se) (3) was also prepared from the reaction of red selenium and (Me)LAlH2 (1). All compounds were characterized by spectroscopic methods and X-ray diffraction studies. Density functional theory calculations were performed on 4 and 7.
RESUMO
The synthesis and stabilization of alumo- and gallodisilicates [HC{C(Me)N(2,6-iPr2C6H3)}2]M[(µ-O)Si(OH)(OtBu)2]2 [M = Al (1), Ga (2)] containing two silicate subunits have been achieved through reactions between 2 equiv of the silanediol (tBuO)2Si(OH)2 and the aluminum hydride [HC{C(Me)N(2,6-iPr2C6H3)}2]AlH2 or the gallium amide [HC{C(Me)N(2,6-iPr2C6H3)}2]Ga(NHEt)2, respectively. Compounds 1 and 2 exhibit M(O-SiO2-OH)2 moiety and represent the first molecular metallosilicate-based analogues of neighboring silanol groups found in silicate surfaces. The substitution of both SiOH groups led to the formation of bimetallic compounds with 4R topologies, which are regularly found in zeolitic materials. Thus, reactions between group 4 metal amides M'(NEt2)4 (M' = Ti, Zr, Hf) and 1 and 2 resulted in the formation of nine heterometallic silicates (3-11) containing inorganic M(O-Si-O)2M' and [M(O-Si-O)2]2M' cores with 4R and spiro-4R topologies, respectively. The latter have M···M distances of 0.81 nm. NMR studies of the heterometallic derivatives showed a fluxional behavior at room temperature due to a high flexibility of the eight-membered ring.
RESUMO
The title compound, C35H57NO3·0.25H2O, was synthesized from de-oxy-cholic acid followed by a protection, a Mitsonobu substitution, a Staudinger reduction, formation of an amide and final reduction in the lateral chain. The compound crystallizes in the P1 space group with four steroid mol-ecules and one water mol-ecule in the triclinic cell unit. The crystal structure features O-Hâ¯O hydrogen bonding. The crystal studied was refined as a non-merohedral twin.
RESUMO
The molecular titanosilicate [(tBuO3)3SiO]3TiNEt2 (1) was obtained from the reaction between silanol (tBuO3)3SiOH and titanium amide Ti(NEt2)4. The reaction of 1 with alkali metal hydroxides MOH (M = Li, Na, K, Rb, Cs) offers a straightforward route to the alkaline salts of titanosilicates [MOTi{OSi(OtBu)3}3]2 with a terminal Ti-O- moiety. All compounds were characterised by single-crystal X-ray diffraction studies. Hirshfeld atom refinement and QTAIM analysis of the electron density in 1 and in the Rb salt 5 revealed the D-A nature of the Ti-O and Ti-N bonds and the presence of agostic C-Hâ¯Rb interactions.
RESUMO
Crystallization of Na(2)VOP(2)O(7) from its aqueous solution results in formation of a one-dimensional inorganic polymer {Na(2)VO(H(2)O)P(2)O(7)·7H(2)O}(n) (1). When this polymer is dehydrated at elevated temperatures this polymer undergoes a phase transition to form the two-dimensional framework ß-Na(2)VOP(2)O(7), which although previously reported had been difficult to access. Exchanging lithium for sodium via ion-exchange chromatography results in formation of a discrete, cyclic, tetramer species, Li(8)[VOP(2)O(7)(H(2)O)·4H(2)O](4) (2). Isolation of crystalline ß-Li(2)VOP(2)O(7) using a dehydration procedure analogous to the one employed for the sodium derivative was unsuccessful. In contrast, we show that ß-K(2)VOP(2)O(7) can be obtained from the amorphous phase K(2)VOP(2)O(7)·nH(2)O (n = 0-7) upon thermal dehydration.
Assuntos
Técnicas de Química Sintética/métodos , Difosfatos/química , Compostos Organometálicos/química , Compostos Organometálicos/síntese química , Vanádio/química , Modelos Moleculares , Conformação Molecular , TemperaturaRESUMO
The cyclic alumosiloxane [{LAl(µ-O)(Ph(2)Si)(µ-O)}(2)] (3) and alumosilicate [{LAl(µ-O){((t)BuO)(2)Si}(µ-O)}(2)] (4) were obtained by reaction of the appropriate R(2)Si(OH)(2) precursor (R = Ph, O(t)Bu) with [{LAl(H)}(2)(µ-O)] (1), providing a nice illustration of the Loewenstein rule at work at the molecular level.
RESUMO
Reaction between the silanediol (HO)(2)Si(OtBu)(2) and gallium amides, LGaCl(NHtBu) and LGa(NHEt)(2) (L = [HC{C(Me)N(Ar)}(2)](-), Ar = 2,6-iPr(2)C(6)H(3)), respectively, resulted in the facile isolation of molecular gallosilicates LGaCl(µ-O)Si(OH)(OtBu)(2) (1) and LGa(NHEt)(µ-O)Si(OH)(OtBu)(2) (2). Compound 2 easily reacts with 1 equiv of water to form the unique gallosilicate-hydroxide LGa(OH·THF)(µ-O)Si(OH)(OtBu)(2) (3). Compounds 1-3 contain the simple Ga-O-SiO(3) framework and are the first structurally authenticated molecular gallosilicates. These compounds may be used not only as models for gallosilicate-based materials but also as further reagents because of the presence of reactive functional groups attached to both gallium and silicon atoms. Accordingly, seven molecular heterometallic compounds were obtained from the reactions between compound 3 and group 4 amides M(NMe(2))(4) (M = Ti, Zr) or M(NEt(2))(4) (M = Ti, Zr, Hf). Hence, by tuning the reactions conditions and stoichiometries, it was possible to isolate and structurally characterize the complete 1:1 and 2:1 series (4-10). Completely inorganic cores of types M-O-Ga-O-Si-O and spiro M[O-Ga-O-Si-O](2) were obtained and characterized by common spectroscopic techniques.