RESUMO
Single-molecule localization microscopy (SMLM) has created the opportunity of pushing fluorescence microscopy from being a biological imaging tool to a surface characterization and possibly even a quantitative analytical tool. The latter could be achieved by molecular counting using pointillist SMLM data sets. However, SMLM is especially sensitive to background fluorescent signals, which influences any subsequent analysis. Therefore, fabricating sensing surfaces that resist nonspecific adsorption of proteins, even after multiple modification steps, has become paramount. Herein is reported two different ways to modify surfaces: dichlorodimethylsilane-biotinylated bovine serum albumin-Tween-20 (DbT20) and poly-l-lysine grafted polyethylene glycol (PLL-PEG) mixed with biotinylated PLL-PEG (PLL-PEG/PEGbiotin). The results show that the ability to resist nonspecific adsorption of DbT20 surfaces deteriorates with an increase in the number of modification steps required after the addition of the DbT20, which limits the applicability of this surface for SMLM. As such, a new surface for SMLM that employs PLL-PEG/PEGbiotin was developed that exhibits ultralow amounts of nonspecific protein adsorption even after many modification steps. The utility of the surface was demonstrated for human influenza hemagglutinin-tagged mEos2, which was directly pulled down from cell lysates onto the PLL-PEG/PEGbiotin surface. The results strongly indicated that the PLL-PEG/PEGbiotin surface satisfies the criteria of SMLM imaging of a negligible background signal and negligible nonspecific adsorption.
RESUMO
Tropomyosins (Tm) in humans are expressed from four distinct genes and by alternate splicing >40 different Tm polypeptide chains can be made. The functional Tm unit is a dimer of two parallel polypeptide chains and these can be assembled from identical (homodimer) or different (heterodimer) polypeptide chains provided both chains are of the same length. Since most cells express multiple isoforms of Tm, the number of different homo and heterodimers that can be assembled becomes very large. We review the mechanism of dimer assembly and how preferential assembly of some heterodimers is driven by thermodynamic stability. We examine how in vitro studies can reveal functional differences between Tm homo and heterodimers (stability, actin affinity, flexibility) and the implication for how there could be selection of Tm isomers in the assembly on to an actin filament. The role of Tm heterodimers becomes more complex when mutations in Tm are considered, such as those associated with cardiomyopathies, since mutations can appear in only one of the chains.
Assuntos
Tropomiosina/química , Tropomiosina/genética , Actinas/química , Actinas/metabolismo , Animais , Humanos , Polimorfismo Genético , Isoformas de Proteínas , Relação Estrutura-Atividade , Tropomiosina/metabolismoRESUMO
α-Tropomyosin (Tm) carrying hypertrophic cardiomyopathy mutation D175N or E180G was expressed in Escherichia coli. We have assembled dimers of two polypeptide chains in vitro that carry one (αα*) or two (α*α*) copies of the mutation. We found that the presence of the mutation has little effect on dimer assembly, thereby predicting that individuals heterozygous for the Tm mutations are likely to express both αα* and α*α* Tm. Depending on the expression level, the heterodimer may be the predominant form in individuals carrying the mutation. Thus, it is important to define differences in the properties of Tm molecules carrying one or two copies of the mutation. We examined the Tm homo- and heterodimer properties: actin affinity, thermal stability, calcium regulation of myosin subfragment 1 binding, and calcium regulation of myofibril force. We report that the properties of the heterodimer may be similar to those of the wild-type homodimer (actin affinity, thermal stability, D175N αα*), similar to those of the mutant homodimer (calcium sensitivity, D175N αα*), intermediate between the two (actin affinity, E180G αα*), or different from both (thermal stability, E180G αα*). Thus, the properties of the homodimer are not a completely reliable guide to the properties of the heterodimer.
Assuntos
Mutação , Tropomiosina/genética , Sequência de Aminoácidos , Dicroísmo Circular , Dimerização , Dados de Sequência Molecular , Desnaturação Proteica , Tropomiosina/químicaRESUMO
Point mutations targeting muscle thin filament proteins are the cause of a number of cardiomyopathies. In many cases, biological effects of the mutations are well-documented, whereas their structural and mechanical impact on filament assembly and regulatory function is lacking. In order to elucidate molecular defects leading to cardiac dysfunction, we have examined the structural mechanics of two tropomyosin mutants, E180G and D175N, which are associated with hypertrophic cardiomyopathy (HCM). Tropomyosin is an α-helical coiled-coil dimer which polymerizes end-to-end to create an elongated superhelix that wraps around F-actin filaments of muscle and non-muscle cells, thus modulating the binding of other actin-binding proteins. Here, we study how flexibility changes in the E180G and D175N mutants might affect tropomyosin binding and regulatory motion on F-actin. Electron microscopy and Molecular Dynamics simulations show that E180G and D175N mutations cause an increase in bending flexibility of tropomyosin both locally and globally. This excess flexibility is likely to increase accessibility of the myosin-binding sites on F-actin, thus destabilizing the low-Ca(2+) relaxed-state of cardiac muscle. The resulting imbalance in the on-off switching mechanism of the mutants will shift the regulatory equilibrium towards Ca(2+)-activation of cardiac muscle, as is observed in affected muscle, accompanied by enhanced systolic activity, diastolic dysfunction, and cardiac compensations associated with HCM and heart failure.
Assuntos
Cardiomiopatia Hipertrófica/genética , Tropomiosina/química , Tropomiosina/genética , Actinas/química , Substituição de Aminoácidos , Asparagina/química , Asparagina/genética , Ácido Aspártico/química , Ácido Aspártico/genética , Cálcio/química , Ácido Glutâmico/química , Ácido Glutâmico/genética , Glicina/química , Glicina/genética , Humanos , Microscopia Eletrônica , Modelos Químicos , Simulação de Dinâmica Molecular , Mutação , Miosinas/química , Estrutura Secundária de ProteínaRESUMO
Tropomyosins are elongated alpha-helical proteins that form co-polymers with most actin filaments within a cell and play important roles in the structural and functional diversification of the actin cytoskeleton. How the assembly of tropomyosins along an actin filament is regulated and the kinetics of tropomyosin association with an actin filament is yet to be fully determined. A recent series of publications have used total internal reflection fluorescence (TIRF) microscopy in combination with advanced surface and protein chemistry to visualise the molecular assembly of actin/tropomyosin filaments in vitro. Here, we review the use of the in vitro TIRF assay in the determination of kinetic data on tropomyosin filament assembly. This sophisticated approach has enabled generation of real-time single-molecule data to fill the gap between in vitro bulk assays and in vivo assays of tropomyosin function. The in vitro TIRF assays provide a new foundation for future studies involving multiple actin-binding proteins that will more accurately reflect the physiological protein-protein interactions in cells.
RESUMO
Tropomyosins regulate the dynamics and functions of the actin cytoskeleton by forming long chains along the two strands of actin filaments that act as gatekeepers for the binding of other actin-binding proteins. The fundamental molecular interactions underlying the binding of tropomyosin to actin are still poorly understood. Using microfluidics and fluorescence microscopy, we observed the binding of the fluorescently labeled tropomyosin isoform Tpm1.8 to unlabeled actin filaments in real time. This approach, in conjunction with mathematical modeling, enabled us to quantify the nucleation, assembly, and disassembly kinetics of Tpm1.8 on single filaments and at the single-molecule level. Our analysis suggests that Tpm1.8 decorates the two strands of the actin filament independently. Nucleation of a growing tropomyosin domain proceeds with high probability as soon as the first Tpm1.8 molecule is stabilized by the addition of a second molecule, ultimately leading to full decoration of the actin filament. In addition, Tpm1.8 domains are asymmetrical, with enhanced dynamics at the edge oriented toward the barbed end of the actin filament. The complete description of Tpm1.8 kinetics on actin filaments presented here provides molecular insight into actin-tropomyosin filament formation and the role of tropomyosins in regulating actin filament dynamics.
Assuntos
Citoesqueleto de Actina/metabolismo , Tropomiosina/metabolismo , Citoesqueleto de Actina/fisiologia , Actinas/metabolismo , Cinética , Microfluídica/métodos , Microscopia de Fluorescência/métodos , Ligação Proteica , Domínios Proteicos , Isoformas de Proteínas/metabolismo , Tropomiosina/fisiologiaRESUMO
Tropomyosins (Tpm) determine the functional capacity of actin filaments in an isoform-specific manner. The primary isoform in cancer cells is Tpm3.1 and compounds that target Tpm3.1 show promising results as anti-cancer agents both in vivo and in vitro. We have determined the molecular mechanism of interaction of the lead compound ATM-3507 with Tpm3.1-containing actin filaments. When present during co-polymerization of Tpm3.1 with actin, 3H-ATM-3507 is incorporated into the filaments and saturates at approximately one molecule per Tpm3.1 dimer and with an apparent binding affinity of approximately 2 µM. In contrast, 3H-ATM-3507 is poorly incorporated into preformed Tpm3.1/actin co-polymers. CD spectroscopy and thermal melts using Tpm3.1 peptides containing the C-terminus, the N-terminus, and a combination of the two forming the overlap junction at the interface of adjacent Tpm3.1 dimers, show that ATM-3507 shifts the melting temperature of the C-terminus and the overlap junction, but not the N-terminus. Molecular dynamic simulation (MDS) analysis predicts that ATM-3507 integrates into the 4-helix coiled coil overlap junction and in doing so, likely changes the lateral movement of Tpm3.1 across the actin surface resulting in an alteration of filament interactions with actin binding proteins and myosin motors, consistent with the cellular impact of ATM-3507.
Assuntos
Citoesqueleto de Actina/metabolismo , Antineoplásicos/farmacologia , Tropomiosina/antagonistas & inibidores , Antineoplásicos/química , Antineoplásicos/uso terapêutico , Dicroísmo Circular , Cristalografia por Raios X , Humanos , Simulação de Dinâmica Molecular , Neoplasias/tratamento farmacológico , Conformação Proteica em alfa-Hélice/efeitos dos fármacos , Domínios Proteicos/genética , Isoformas de Proteínas/antagonistas & inibidores , Isoformas de Proteínas/genética , Isoformas de Proteínas/metabolismo , Isoformas de Proteínas/ultraestrutura , Multimerização Proteica/efeitos dos fármacos , Multimerização Proteica/genética , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Proteínas Recombinantes/ultraestrutura , Relação Estrutura-Atividade , Termodinâmica , Tropomiosina/metabolismo , Tropomiosina/ultraestruturaRESUMO
Skeletal muscle tropomyosin (Tpm1.1) is an elongated, rod-shaped, alpha-helical coiled-coil protein that forms continuous head-to-tail polymers along both sides of the actin filament. In this study we use single molecule fluorescence TIRF microscopy combined with a microfluidic device and fluorescently labelled proteins to measure Tpm1.1 association to and dissociation from single actin filaments. Our experimental setup allows us to clearly resolve Tpm1.1 interactions on both sides of the filaments. Here we provide a semi-automated method for the extraction and quantification of kymograph data for individual actin filaments bound at different Tpm1.1 concentrations. We determine boundaries on the kymograph on each side of the actin filament, based on intensity thresholding, performing fine manual editing of the boundaries (if needed) and extracting user defined kinetic properties of the system. Using our analytical tools we can determine (i) nucleation point(s) and rates, (ii) elongation rates of Tpm1.1, (iii) identify meeting points after the saturation of filament, and when dissociation occurs, (iv) initiation point(s), (v) the final dissociation point(s), as well as (vi) dissociation rates. All of these measurements can be extracted from both sides of the filament, allowing for the determination of possible differences in behaviour on the two sides of the filament, and across concentrations. The robust and repeatable nature of the method allows quantitative, semi-automated analyses to be made of large studies of acto-tropomyosin interactions, as well as for other actin binding proteins or filamentous structures, opening the way for dissection of the dynamics underlying these interactions.
Assuntos
Citoesqueleto de Actina/metabolismo , Microscopia de Fluorescência/métodos , Tropomiosina/metabolismo , Animais , Carbocianinas/química , Quimografia , Camundongos , Microfluídica , Ligação Proteica , Coelhos , Tropomiosina/genéticaRESUMO
The tropomyosin family of proteins form end-to-end polymers along the actin filament. Tumour cells rely on specific tropomyosin-containing actin filament populations for growth and survival. To dissect out the role of tropomyosin in actin filament regulation we use the small molecule TR100 directed against the C terminus of the tropomyosin isoform Tpm3.1. TR100 nullifies the effect of Tpm3.1 on actin depolymerisation but surprisingly Tpm3.1 retains the capacity to bind F-actin in a cooperative manner. In vivo analysis also confirms that, in the presence of TR100, fluorescently tagged Tpm3.1 recovers normally into stress fibers. Assembling end-to-end along the actin filament is thereby not sufficient for tropomyosin to fulfil its function. Rather, regulation of F-actin stability by tropomyosin requires fidelity of information communicated at the barbed end of the actin filament. This distinction has significant implications for perturbing tropomyosin-dependent actin filament function in the context of anti-cancer drug development.
Assuntos
Citoesqueleto de Actina/metabolismo , Isoformas de Proteínas/metabolismo , Tropomiosina/metabolismo , Citoesqueleto de Actina/química , Animais , Humanos , Neoplasias/tratamento farmacológico , Neoplasias/metabolismo , Neoplasias/patologia , Ligação Proteica/efeitos dos fármacos , Isoformas de Proteínas/antagonistas & inibidores , Isoformas de Proteínas/química , Multimerização Proteica/efeitos dos fármacos , Coelhos , Bibliotecas de Moléculas Pequenas/química , Bibliotecas de Moléculas Pequenas/farmacologia , Tropomiosina/antagonistas & inibidores , Tropomiosina/químicaRESUMO
Tropomyosin (Tpm) is an α helical coiled-coil dimer that forms a co-polymer along the actin filament. Tpm is involved in the regulation of actin's interaction with binding proteins as well as stabilization of the actin filament and its assembly kinetics. Recent studies show that multiple Tpm isoforms also define the functional properties of distinct actin filament populations within a cell. Subtle structural variations within well conserved Tpm isoforms are the key to their functional specificity. Therefore, we purified and characterized a comprehensive set of 8 Tpm isoforms (Tpm1.1, Tpm1.12, Tpm1.6, Tpm1.7, Tpm1.8, Tpm2.1, Tpm3.1, and Tpm4.2), using well-established actin co-sedimentation and pyrene fluorescence polymerization assays. We observed that the apparent affinity (Kd(app)) to filamentous actin varied in all Tpm isoforms between â¼0.1-5 µM with similar values for both, skeletal and cytoskeletal actin filaments. The data did not indicate any correlation between affinity and size of Tpm molecules, however high molecular weight (HMW) isoforms Tpm1.1, Tpm1.6, Tpm1.7 and Tpm2.1, showed â¼3-fold higher cooperativity compared to low molecular weight (LMW) isoforms Tpm1.12, Tpm1.8, Tpm3.1, and Tpm4.2. The rate of actin filament elongation in the presence of Tpm2.1 increased, while all other isoforms decreased the elongation rate by 27-85 %. Our study shows that the biochemical properties of Tpm isoforms are finely tuned and depend on sequence variations in alternatively spliced regions of Tpm molecules.
Assuntos
Citoesqueleto de Actina/química , Actinas/química , Éxons , Tropomiosina/química , Citoesqueleto de Actina/genética , Citoesqueleto de Actina/metabolismo , Actinas/genética , Actinas/metabolismo , Processamento Alternativo , Sequência de Aminoácidos , Animais , Sítios de Ligação , Clonagem Molecular , Escherichia coli/genética , Escherichia coli/metabolismo , Expressão Gênica , Humanos , Cinética , Peso Molecular , Polimerização , Ligação Proteica , Isoformas de Proteínas/química , Isoformas de Proteínas/genética , Isoformas de Proteínas/metabolismo , Ratos , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Alinhamento de Sequência , Homologia de Sequência de Aminoácidos , Tropomiosina/genética , Tropomiosina/metabolismoRESUMO
Reconstitution of actin filaments on surfaces for observation of filament-associated protein dynamics by fluorescence microscopy is currently an exciting field in biophysics. Here we examine the effects of attaching actin filaments to surfaces on the binding and dissociation kinetics of a fluorescence-labeled tropomyosin, a rod-shaped protein that forms continuous strands wrapping around the actin filament. Two attachment modalities of the actin to the surface are explored: where the actin filament is attached to the surface at multiple points along its length; and where the actin filament is attached at one end and aligned parallel to the surface by buffer flow. To facilitate analysis of actin-binding protein dynamics, we have developed a software tool for the viewing, tracing and analysis of filaments and co-localized species in noisy fluorescence timelapse images. Our analysis shows that the interaction of tropomyosin with actin filaments is similar for both attachment modalities. © 2016 Wiley Periodicals, Inc.