Differences of condylar changes after orthognathic surgery among Class II and Class III patients.

BACKGROUND/PURPOSE: The nature of susceptibility to condylar resorption after orthognathic surgery can be different between skeletal Class II and Class III populations, which was addressed by few in the past. The aim of the present study was to use cone-beam computed tomographic (CBCT) images to investigate the displacement and morphological changes of temporomandibular joints (TMJs) in patients received orthodontic treatment combined with orthognathic surgery. METHODS: Both Class III (n = 34) and Class II (n = 17) patients were compared through overall and regional superimpositions of the initial and posttreatment CBCTs. Two-sample t-test was used to identify significance between group differences. Pearson's correlation coefficient was used to address changes of TMJ and the amount of setback or advancement. RESULTS: The axial ramal angle increased significantly in Class III group and decreased in Class II groups after orthognathic surgery (p < FDR_p). For condylar dimensions, significant widths and lengths reductions were noted only in Class II group. However, no significant difference was found after comparing subgroup differences according to one-jaw and two-jaw options, nor any significant correlation found between the condylar changes and the amount of surgical movements. CONCLUSION: The nature of condylar susceptibility could result more from different skeletal patterns than the amount of surgical movements. However, the direction of mandibular surgery may contribute to different changes of condylar angle in axial section.

Mechanoregulation of osteoblast-like MG-63 cell activities by cyclic stretching.

BACKGROUND/PURPOSE: Mechanical loading plays an important role in regulating bone formation and remodeling. Relevant mechanical stretching can increase the proliferation and differentiation of osteoblastic cells in vitro. However, little is known about the effects of supraphysiological high-level mechanical stretching on the growth and cell cycle progression of osteoblastic cells. METHODS: Osteoblast-like MG-63 cells were seeded onto flexible-bottomed plates and subjected to cyclic mechanical stretching (15% elongation, 0.5 Hz) for 24 and 48 hours in a Flexercell FX-4000 strain unit. Cellular activities were measured by an assay based on the reduction of the tetrazolium salt, 3-[4,5-dimethyldiazol-2-yl]-2,5-diphenyl tetra-zolium bromide (MTT). The number of viable cells was also determined by the trypan blue dye exclusion technique. Cell cycle progression was checked by flow cytometry. mRNA expressions of apoptosis- and cell cycle-related genes (Bcl2, Bax, cdc2, cdc25C, and cyclin B1) were analyzed using an RT-PCR technique. RESULTS: The number of viable cells significantly decreased in osteoblast-like MG-63 cells subjected to cyclic mechanical stretching for 24 or 48 hours. The MTT activity of stretched cells did not change at 24 hours, whereas a significant decrease was noted at 48 hours in comparison to the unstretched controls. The flow cytometry showed that mechanical stretching induced S-phase cell cycle arrest. Furthermore, exposure to mechanical stretching led to apoptotic cell death, as shown by the increase in the hypodiploid sub-G0/G1 cell population. Furthermore, a decreased cdc25C mRNA level was consistently noted in stretched cells. However, the mRNA expressions of Bcl2, Bax, cdc2, and cyclin B1 genes were not significantly altered compared to the unstretched control cells. CONCLUSION: High-level mechanical stretching induced S-phase cell cycle arrest and apoptotic cell death in osteoblastic cells. The results suggest that heavy tensional force is a negative regulator of osteoblastic activities and should, therefore, be minimized if bone formation is attempted during orthodontic/orthopedic treatment.

Orthodontically induced changes to the genetic profile in periodontal ligament tissue and cytokine release in gingival crevicular fluid - A pilot investigation.

Background/purpose: It has been known that genetic factors influence orthodontic tooth movement, however, scientific research on humans is lacking. Therefore, this study aimed to investigate dynamic changes to the genetic profile in human periodontal ligament (PDL) tissue and cytokine release in gingival crevicular fluid (GCF) during the first 28 days of orthodontic treatment. Materials and methods: Fifteen teeth from three patients were recruited. Full-mouth fixed appliances with extraction of four premolars and one maxillary third molar was planned for orthodontic treatment. GCF collection and tooth extraction were performed following force application for 0, 1, 3, 7, and 28 days. GCF was analyzed using multiplex immunoassay for 27 cytokines. PDL tissue was collected after extraction and submitted for RNA exome-sequencing using Illumina sequencing platform. Further analysis of differentially expressed genes (DEGs), gene ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways, and heatmaps were conducted. Results: GCF cytokine levels varied among three patients; some patients exhibited a peak cytokine level on Day 0 whereas others did so on Days 1-3. In RNA exome sequencing data, GO and KEGG analyses showed that genes associated with sensory receptors were upregulated on Day 1, genes involved in bone remodeling were upregulated on Days 3 and 28, and genes related to osteoclast differentiation were upregulated on Day 7. Conclusion: RNA sequencing data demonstrate that the specific types of genes are expressed at different time points, whereas the data on cytokine changes show a large variation in concentration levels and dynamic change patterns among the patients.

Transverse and sagittal angulations of proximal segment after sagittal split and vertical ramus osteotomies and their influence on the stability of distal segment.

BACKGROUND/PURPOSE: This study aimed at comparing the transverse and sagittal angulations of proximal segment after sagittal split ramus osteotomy (SSRO) and intraoral vertical ramus osteotomy (IVRO), and examining their influences on the stability of distal segment. METHODS: Patients who received SSRO (n = 21) or IVRO (n = 11) for mandibular setback were included. Lateral and posteroanterior cephalograms taken within 1 month before surgery (T1), within 1 week after surgery (T2), and at least 6 months after surgery (T3) were analyzed. The angulation of each proximal segment relative to the upper orbital margin line was measured on posteroanterior cephalogram and the sum of both angles (total ramus angle, TRA) was obtained. On lateral radiograph, ramus inclination angle (RIA) relative to a horizontal reference line 7° to the sella-nasion was assessed and B-point position was measured. RESULTS: From T1 to T2, more increases in TRA and RIA were noted after IVRO than after SSRO. From T2 to T3, TRA and RIA significantly decreased in IVRO group but remained relatively stable in SSRO group. ΔTRA(T1-T2) positively related to upward rotation of distal segment for SSRO and downward rotation for IVRO from T2 to T3. For SSRO only, ΔRIA(T1-T2) significantly related to forward movement of distal segment during remodeling. CONCLUSION: TRA and RIA increase significantly after IVRO and then regress, whereas they increase mildly after SSRO and remain stable. Increase in TRA significantly relates to distal segment rotation during remodeling for both surgeries, but increase in RIA relates to forward relapse of the distal segment only for SSRO. The reasons underlying the correlations are not certain and deserve future investigations.

Histological analysis on tissues around orthodontically intruded maxillary molars using temporary anchorage devices: A case report.

Before progress was recently made in the application of temporary anchorage devices (TADs) in bio-mechanical design, orthodontists were rarely able to intrude molars to reduce upper posterior dental height (UPDH). However, TADs are now widely used to intrude molars to flatten the occlusal plane or induce counterclockwise rotation of the mandible. Previous studies involving clinical or animal histological evaluation on changes in periodontal conditions after molar intrusion have been reported, however, studies involving human histology are scarce. This case was a Class I malocclusion with a high mandibular plane angle. Upper molar intrusion with TADs was performed to reduce UPDH, which led to counterclockwise rotation of the mandible. After 5 months of upper molar intrusion, shortened clinical crowns were noticed, which caused difficulties in oral hygiene and hindered orthodontic tooth movement. The mid-treatment cone-beam computed tomography revealed redundant bone physically interfering with buccal attachment and osseous resective surgeries were followed. During the surgeries, bilateral mini screws were removed and bulging alveolar bone and gingiva were harvested for biopsy. Histological examination revealed bacterial colonies at the bottom of the sulcus. Infiltration of chronic inflammatory cells underneath the non-keratinized sulcular epithelium was noted, with abundant capillaries being filled with red blood cells. Proximal alveolar bone facing the bottom of the gingival sulcus exhibited active bone remodeling and woven bone formation with plump osteocytes in the lacunae. On the other hand, buccal alveolar bone exhibited lamination, indicating slow bone turnover in the lateral region.

Orthodontic force regulates metalloproteinase-3 promoter in osteoblasts and transgenic mouse models.

BACKGROUND/PURPOSE: Previously we demonstrated up-regulation of matrix metalloproteinase-3 (MMP-3) in human osteoblasts under compression and in bony specimens of experimental orthodontic tooth movement (OTM). Here, we studied the temporal characteristics of compression stimulation in human and mouse osteoblast cell lines, and generated a transgenic mouse model for assessing the MMP-3 expression during OTM. MATERIALS AND METHODS: We investigated MMP-3 expressions in human and murine osteoblasts through RT-PCR and luciferase assay, after compressive force loading. Inhibitors were added to identify the possible mechanisms for signal transduction. A human MMP-3 promoter was isolated, cloned and transfected to generate a transgenic mouse with a green fluorescent protein reporter. OTM was then initiated to observe the location and time course of transcriptional regulation of MMP-3 signals. RESULTS: We found changes in the transcription of MMP-3 in response to mechanical force applied to both human and mouse osteoblast cell lines, suggesting that the response is positive across species. Cloned human MMP-3 promoter may cause the response of luciferase to 1% compression. Moreover, p38 inhibitor exerted a down-regulatory effect on MMP-3 promoter expression, although the inhibitory effect didn't reach a significant level. In the transgenic mouse OTM model, we again found increased expression of MMP-3 in response to mechanical force loading around the periodontal ligament. CONCLUSION: Mechanical force can stimulate MMP-3 expression, possibly through the p38 MAPK pathway, with its strongest signal occurring at 24 h. The mechanical responsiveness in MMP-3 promoter regions can be observed in both humans and rodents in vitro and in vivo.

Relationship between age at menarche and skeletal maturation stages in Taiwanese female orthodontic patients.

BACKGROUND/PURPOSE: The age at menarche reflects a pubertal girl's physiologic maturity. The aims of this study were to evaluate the relationship between the age at menarche and skeletal maturation in female orthodontic patients. METHODS: Hand-wrist radiographs and lateral cephalometric radiographs from 304 adolescent female subjects (age, 8-18.9 years) were selected from the files of the Department of Orthodontics, National Taiwan University Hospital (NTUH). Hand-wrist bone maturation stages were assessed using the NTUH Skeletal Maturation Index (NTUH-SMI). Cervical vertebral maturation stages (CVMS) were determined using the latest CVMS Index. Menarcheal ages were self-reported by the patients and verified by the patients' mothers. The relationships between the NTUH-SMI or CVM stages and menarcheal status were investigated. RESULTS: More than 90% of the 148 subjects who had already attained menstruation had skeletal maturation beyond the NTUH-SMI stage four or CVMS III. However, the subjects who had never experienced menarche mostly had skeletal maturation before NTUH-SMI stage five or CVMS IV. During the period of orthodontic treatment, 19 females experienced their menarche. The mean age at menarche for the 167 female patients in total was 11.97 years. In average, menarche occurred between NTUH-SMI stages four and five or between CVM stages III and IV. The percentage of girls with menses increased from 1.2% at age 9 to 6.6% at age 10, 39.5% at age 11, 81.4% at age 12, 97% at age 13, and 100% at age 14. Compared with the results obtained 20 years previously, we found a downward shift of 0.47 years per decade for the mean age at menarche in female orthodontic patients. CONCLUSION: The majority of female orthodontic patients have passed the pubertal growth spurt when they experience their menarche. Menarche usually follows the pubertal growth spurt by about 1 year and occurs after NTUH-SMI stage four or CVMS III.

The effects of acellular amniotic membrane matrix on osteogenic differentiation and ERK1/2 signaling in human dental apical papilla cells.

The amniotic membrane (AM) has been widely used in the field of tissue engineering because of the favorable biological properties for scaffolding material. However, little is known about the effects of an acellular AM matrix on the osteogenic differentiation of mesenchymal stem cells. In this study, it was found that both basement membrane side and collagenous stroma side of the acellular AM matrix were capable of providing a preferential environment for driving the osteogenic differentiation of human dental apical papilla cells (APCs) with proven stem cell characteristics. Acellular AM matrix potentiated the induction effect of osteogenic supplements (OS) such as ascorbic acid, ß-glycerophosphate, and dexamethasone and enhanced the osteogenic differentiation of APCs, as seen by increased core-binding factor alpha 1 (Cbfa-1) phosphorylation, alkaline phosphatase activity, mRNA expression of osteogenic marker genes, and mineralized matrix deposition. Even in the absence of soluble OS, acellular AM matrix also could exert the substrate-induced effect on initiating APCs' differentiation. Especially, the collagenous stroma side was more effective than the basement membrane side. Moreover, the AM-induced effect was significantly inhibited by U0126, an inhibitor of extracellular signaling-regulated kinase 1/2 (ERK1/2) signaling. Taken together, the osteogenic differentiation promoting effect on APCs is AM-specific, which provides potential applications of acellular AM matrix in bone/tooth tissue engineering.

Long-term effect of pulsed Nd:YAG laser irradiation on cultured human periodontal fibroblasts.

BACKGROUND AND OBJECTIVES: The purpose of this study was to investigate the long-term effect of Nd:YAG laser irradiation on cultured human periodontal fibroblasts (hPF). STUDY DESIGN/MATERIALS AND METHODS: The cultured hPF were irradiated by pulsed Nd:YAG laser. The power delivery was 50 mJ x 10 pps (pulse per second) with irradiation duration 60, 120, 180, or 240 seconds. The viability and collagen content of laser-irradiated hPF were assessed on day 5 after laser treatment. Light microscope and transmission electron microscope (TEM) were used to observe cytomorphological change. The irradiated hPF cultured in mineralizing medium for 28 days were examined by alizarin red S and Von Kossa stain. RESULTS: The cellular viability and collagen content of hPF decreased after Nd:YAG laser irradiation. Cell damage was noted with retraction of cellular processes, loss of normal architecture, and lysis of some cells. However, survived hPF proliferated and migrated to the cell-debris-associated deposits. The electron-dense cytoplasm and amorphous organelles in laser-damaged cells was revealed by TEM. In vitro mineralization was demonstrated in the long-term laser-irradiated hPF cultured in mineralizing medium. CONCLUSION: Nd:YAG laser irradiation induced partial loss of cellular viability and collagen content. The co-existence of viable cells and progressive degeneration of laser-damaged cells was associated with the in vitro mineralization of hPF.