RESUMO
In this study, we investigated the potential of the multivariate curve resolution alternating least squares (MCR-ALS) algorithm for analyzing three-dimensional (3D) 1 H-MRSI data of the prostate in prostate cancer (PCa) patients. MCR-ALS generates relative intensities of components representing spectral profiles derived from a large training set of patients, providing an interpretable model. Our objectives were to classify magnetic resonance (MR) spectra, differentiating tumor lesions from benign tissue, and to assess PCa aggressiveness. We included multicenter 3D 1 H-MRSI data from 106 PCa patients across eight centers. The patient cohort was divided into a training set (N = 63) and an independent test set (N = 43). Singular value decomposition determined that MR spectra were optimally represented by five components. The profiles of these components were extracted from the training set by MCR-ALS and assigned to specific tissue types. Using these components, MCR-ALS was applied to the test set for a quantitative analysis to discriminate tumor lesions from benign tissue and to assess tumor aggressiveness. Relative intensity maps of the components were reconstructed and compared with histopathology reports. The quantitative analysis demonstrated a significant separation between tumor and benign voxels (t-test, p < 0.001). This result was achieved including voxels with low-quality MR spectra. A receiver operating characteristic analysis of the relative intensity of the tumor component revealed that low- and high-risk tumor lesions could be distinguished with an area under the curve of 0.88. Maps of this component properly identified the extent of tumor lesions. Our study demonstrated that MCR-ALS analysis of 1 H-MRSI of the prostate can reliably identify tumor lesions and assess their aggressiveness. It handled multicenter data with minimal preprocessing and without using prior knowledge or quality control. These findings indicate that MCR-ALS can serve as an automated tool to assess the presence, extent, and aggressiveness of tumor lesions in the prostate, enhancing diagnostic capabilities and treatment planning of PCa patients.
Assuntos
Próstata , Neoplasias da Próstata , Masculino , Humanos , Próstata/diagnóstico por imagem , Próstata/patologia , Prótons , Neoplasias da Próstata/diagnóstico por imagem , Imageamento por Ressonância Magnética , Espectroscopia de Ressonância Magnética/métodos , Análise dos Mínimos QuadradosRESUMO
The comprehension of microbial interactions is one of the key challenges in marine microbial ecology. This study focused on exploring chemical interactions between the toxic dinoflagellate Prorocentrum lima and a filamentous fungal species, Aspergillus pseudoglaucus, which has been isolated from the microalgal culture. Such interspecies interactions are expected to occur even though they were rarely studied. Here, a co-culture system was designed in a dedicated microscale marine-like condition. This system allowed to explore microalgal-fungal physical and metabolic interactions in presence and absence of the bacterial consortium. Microscopic observation showed an unusual physical contact between the fungal mycelium and dinoflagellate cells. To delineate specialized metabolome alterations during microalgal-fungal co-culture metabolomes were monitored by high-performance liquid chromatography coupled to high-resolution mass spectrometry. In-depth multivariate statistical analysis using dedicated approaches highlighted (1) the metabolic alterations associated with microalgal-fungal co-culture, and (2) the impact of associated bacteria in microalgal metabolome response to fungal interaction. Unfortunately, only a very low number of highlighted features were fully characterized. However, an up-regulation of the dinoflagellate toxins okadaic acid and dinophysistoxin 1 was observed during co-culture in supernatants. Such results highlight the importance to consider microalgal-fungal interactions in the study of parameters regulating toxin production.
Assuntos
Dinoflagellida , Microalgas , Toxinas Marinhas , Dinoflagellida/metabolismo , Aspergillus , Cromatografia Líquida de Alta Pressão/métodos , Microalgas/metabolismoRESUMO
Distinguishing isomeric saccharides poses a major challenge for analytical workflows based on (liquid chromatography) mass spectrometry (LC-MS). In recent years, many studies have proposed infrared ion spectroscopy as a possible solution as the orthogonal, spectroscopic characterization of mass-selected ions can often distinguish isomeric species that remain unresolved using conventional MS. However, the high conformational flexibility and extensive hydrogen bonding in saccharides cause their room-temperature fingerprint infrared spectra to have broad features that often lack diagnostic value. Here, we show that room-temperature infrared spectra of ion-complexed saccharides recorded in the previously unexplored far-infrared wavelength range (300-1000 cm-1) provide well-resolved and highly diagnostic features. We show that this enables distinction of isomeric saccharides that differ either by their composition of monosaccharide units and/or the orientation of their glycosidic linkages. We demonstrate the utility of this approach from single monosaccharides up to isomeric tetrasaccharides differing only by the configuration of a single glycosidic linkage. Furthermore, through hyphenation with hydrophilic interaction liquid chromatography, we identify oligosaccharide biomarkers in patient body fluid samples, demonstrating a generalized and highly sensitive MS-based method for the identification of saccharides found in complex sample matrices.
Assuntos
Erros Inatos do Metabolismo , Oligossacarídeos , Humanos , Oligossacarídeos/química , Isomerismo , Monossacarídeos , Espectrofotometria Infravermelho , Biomarcadores , ÍonsRESUMO
Enantioselective reactions are at the core of chemical synthesis. Their development mostly relies on prior knowledge, laborious product analysis and post-rationalization by theoretical methods. Here, we introduce a simple and fast method to determine enantioselectivities based on mass spectrometry. The method is based on ion mobility separation of diastereomeric intermediates, formed from a chiral catalyst and prochiral reactants, and delayed reactant labeling experiments to link the mass spectra with the reaction kinetics in solution. The data provide rate constants along the reaction paths for the individual diastereomeric intermediates, revealing the origins of enantioselectivity. Using the derived kinetics, the enantioselectivity of the overall reaction can be predicted. Hence, this method can offer a rapid discovery and optimization of enantioselective reactions in the future. We illustrate the method for the addition of cyclopentadiene (CP) to an α,ß-unsaturated aldehyde catalyzed by a diarylprolinol silyl ether.
Assuntos
Aldeídos , Éteres , Aldeídos/química , Catálise , Éteres/química , Espectrometria de Massas , EstereoisomerismoRESUMO
Quantitative vibrational absorption spectroscopies rely on Beer's law relating spectroscopic intensities in a linear fashion to chemical concentrations. To address and clarify contrasting results in the literature about the difference between volume- and mass-based concentrations units used for quantitative spectroscopy on liquid solutions, we performed near-infrared, mid-infrared, and Raman spectroscopy measurements on four different binary solvent mixtures. Using classical least squares (CLS) and partial least squares (PLS) as multivariate analysis methods, we demonstrate that spectroscopic intensities are linearly related to volume-based concentration units rather than more widely used mass-based concentration units such as weight percent. The CLS results show that the difference in root mean square error of prediction (RMSEP) values between CLS models based on mass and volume fractions correlates strongly with the density difference between the two solvents in each binary mixture. This is explained by the fact that density differences are the source of non-linearity between mass and volume fractions in such mixtures. We also show that PLS calibration handles the non-linearity in mass-based models by the inclusion of additional latent variables that describe residual spectroscopic variation beyond the first latent variable (e.g., due to small peak shifts), as observed in the experimental data of all binary solvent mixtures. Using simulation studies, we have quantified the relative errors (up to 10-15%) that are made in PLS modeling when using mass fractions instead of volume fractions. Overall, our results provide conclusive evidence that concentration units based on volume should be preferred for optimal spectroscopic calibration results in academic and industrial practice.
RESUMO
This manuscript reports on the application of chemometric methods for the development of an optimized microfluidic paper-based analytical device (µPAD). As an example, we applied chemometric methods for both device optimization and data processing of results of a colorimetric uric acid assay. Box-Behnken designs (BBD) were utilized for the optimization of the device geometry and the amount of thermal inkjet-deposited assay reagents, which affect the assay performance. Measurement outliers were detected in real time by partial least squares discriminant analysis (PLS-DA) of scanned images. The colorimetric assay mechanism is based on the on-device formation of silver nanoparticles (AgNPs) through the interaction of uric acid, ammonia, and poly(vinyl alcohol) with silver ions under mild basic conditions. The yellow color originating from visible light absorption by localized surface plasmon resonance of AgNPs can be detected by the naked eye or, more quantitatively, with a simple flat-bed scanner. Under optimized conditions, the linearity of the calibration curve ranges from 0.1-5 × 10-3 mol L-1 of uric acid with a limit of detection of 33.9 × 10-6 mol L-1 and a relative standard of deviation 4.5% (n = 3 for determination of 5.0 × 10-3 mol L-1 uric acid). Graphical abstract A chemometrics-assisted microfluidic paper-based analytical device was developed as a low-cost and rapid platform for the determination of uric acid (UA). The detection method is based on the chemical interaction of UA, ammonia, and polyvinyl alcohol under mild basic condition with silver ions inducing formation of yellow silver nanoparticles (AgNPs).
RESUMO
The selection of optimal preprocessing is among the main bottlenecks in chemometric data analysis. Preprocessing currently is a burden, since a multitude of different preprocessing methods is available for, e.g., baseline correction, smoothing, and alignment, but it is not clear beforehand which method(s) should be used for which data set. The process of preprocessing selection is often limited to trial-and-error and is therefore considered somewhat subjective. In this paper, we present a novel, simple, and effective approach for preprocessing selection. The defining feature of this approach is a design of experiments. On the basis of the design, model performance of a few well-chosen preprocessing methods, and combinations thereof (called strategies) is evaluated. Interpretation of the main effects and interactions subsequently enables the selection of an optimal preprocessing strategy. The presented approach is applied to eight different spectroscopic data sets, covering both calibration and classification challenges. We show that the approach is able to select a preprocessing strategy which improves model performance by at least 50% compared to the raw data; in most cases, it leads to a strategy very close to the true optimum. Our approach makes preprocessing selection fast, insightful, and objective.
RESUMO
In functional genomics it is more rule than exception that experimental designs are used to generate the data. The samples of the resulting data sets are thus organized according to this design and for each sample many biochemical compounds are measured, e.g. typically thousands of gene-expressions or hundreds of metabolites. This results in high-dimensional data sets with an underlying experimental design. Several methods have recently become available for analyzing such data while utilizing the underlying design. We review these methods by putting them in a unifying and general framework to facilitate understanding the (dis-)similarities between the methods. The biological question dictates which method to use and the framework allows for building new methods to accommodate a range of such biological questions. The framework is built on well known fixed-effect ANOVA models and subsequent dimension reduction. We present the framework both in matrix algebra as well as in more insightful geometrical terms. We show the workings of the different special cases of our framework with a real-life metabolomics example from nutritional research and a gene-expression example from the field of virology.
Assuntos
Análise de Variância , Genômica/métodos , Metabolômica/métodos , Algoritmos , Bases de Dados Factuais , Humanos , Conceitos Matemáticos , Projetos de PesquisaRESUMO
An important part of the current hazard identification of novel plant varieties is comparative targeted analysis of the novel and reference varieties. Comparative analysis will become much more informative with unbiased analytical approaches, e.g. omics profiling. Data analysis estimating the similarity of new varieties to a reference baseline class of known safe varieties would subsequently greatly facilitate hazard identification. Further biological and eventually toxicological analysis would then only be necessary for varieties that fall outside this reference class. For this purpose, a one-class classifier tool was explored to assess and classify transcriptome profiles of potato (Solanum tuberosum) varieties in a model study. Profiles of six different varieties, two locations of growth, two year of harvest and including biological and technical replication were used to build the model. Two scenarios were applied representing evaluation of a 'different' variety and a 'similar' variety. Within the model higher class distances resulted for the 'different' test set compared with the 'similar' test set. The present study may contribute to a more global hazard identification of novel plant varieties.
Assuntos
Perfilação da Expressão Gênica , Modelos Teóricos , Plantas Geneticamente Modificadas/toxicidade , Solanum tuberosum/genética , TranscriptomaRESUMO
A common goal in chemistry is to study the relationship between a measured signal and the variability of certain factors. To this end, researchers often use Design of Experiment to decide which experiments to conduct and (Multiple) Linear Regression, and/or Analysis of Variance to analyze the collected data. Among the assumptions to the very foundation of this strategy, all the experiments are independent, conditional on the settings of the factors. Unfortunately, due to the presence of uncontrollable factors, real-life experiments often deviate from this assumption, making the data analysis results unreliable. In these cases, Mixed-Effects modeling, despite not being widely used in chemometrics, represents a solid data analysis framework to obtain reliable results. Here we provide a tutorial for Linear Mixed-Effects models. We gently introduce the reader to these models by showing some motivating examples. Then, we discuss the theory behind Linear Mixed-Effect models, and we show how to fit these models by making use of real-life data obtained from an exposome study. Throughout the paper we provide R code so that each researcher is able to implement these useful model themselves.
RESUMO
Arthropod herbivory induces plant volatiles that can be used by natural enemies of the herbivores to find their prey. This has been studied mainly for arthropods that prey upon or parasitise herbivorous arthropods but rarely for insectivorous birds, one of the main groups of predators of herbivorous insects such as lepidopteran larvae. Here, we show that great tits (Parus major) discriminate between caterpillar-infested and uninfested trees. Birds were attracted to infested trees, even when they could not see the larvae or their feeding damage. We furthermore show that infested and uninfested trees differ in volatile emissions and visual characteristics. Finally, we show, for the first time, that birds smell which tree is infested with their prey based on differences in volatile profiles emitted by infested and uninfested trees. Volatiles emitted by plants in response to herbivory by lepidopteran larvae thus not only attract predatory insects but also vertebrate predators.
Assuntos
Herbivoria , Malus/metabolismo , Mariposas/fisiologia , Passeriformes/fisiologia , Compostos Orgânicos Voláteis/metabolismo , Animais , Larva/fisiologia , Olfato , Compostos Orgânicos Voláteis/químicaRESUMO
Upon herbivore feeding, plants emit complex bouquets of induced volatiles that may repel insect herbivores as well as attract parasitoids or predators. Due to differences in the temporal dynamics of individual components, the composition of the herbivore-induced plant volatile (HIPV) blend changes with time. Consequently, the response of insects associated with plants is not constant either. Using Brassica juncea as the model plant and generalist Spodoptera spp. larvae as the inducing herbivore, we investigated herbivore and parasitoid preference as well as the molecular mechanisms behind the temporal dynamics in HIPV emissions at 24, 48 and 72 h after damage. In choice tests, Spodoptera litura moth preferred undamaged plants, whereas its parasitoid Cotesia marginiventris favoured plants induced for 48 h. In contrast, the specialist Plutella xylostella and its parasitoid C. vestalis preferred plants induced for 72 h. These preferences matched the dynamic changes in HIPV blends over time. Gene expression analysis suggested that the induced response after Spodoptera feeding is mainly controlled by the jasmonic acid pathway in both damaged and systemic leaves. Several genes involved in sulphide and green leaf volatile synthesis were clearly up-regulated. This study thus shows that HIPV blends vary considerably over a short period of time, and these changes are actively regulated at the gene expression level. Moreover, temporal changes in HIPVs elicit differential preferences of herbivores and their natural enemies. We argue that the temporal dynamics of HIPVs may play a key role in shaping the response of insects associated with plants.
Assuntos
Herbivoria , Himenópteros/fisiologia , Lepidópteros/fisiologia , Mostardeira/química , Spodoptera/fisiologia , Compostos Orgânicos Voláteis/química , Animais , Ciclopentanos/metabolismo , Feminino , Regulação da Expressão Gênica de Plantas , Especificidade de Hospedeiro , Larva/fisiologia , Lepidópteros/parasitologia , Mostardeira/genética , Oxilipinas/metabolismo , Folhas de Planta/química , Folhas de Planta/genética , Spodoptera/parasitologiaRESUMO
BACKGROUND: Infected necrotising pancreatitis is a potentially lethal disease that nearly always requires intervention. Traditionally, primary open necrosectomy has been the treatment of choice. In recent years, the surgical step-up approach, consisting of percutaneous catheter drainage followed, if necessary, by (minimally invasive) surgical necrosectomy has become the standard of care. A promising minimally invasive alternative is the endoscopic transluminal step-up approach. This approach consists of endoscopic transluminal drainage followed, if necessary, by endoscopic transluminal necrosectomy. We hypothesise that the less invasive endoscopic step-up approach is superior to the surgical step-up approach in terms of clinical and economic outcomes. METHODS/DESIGN: The TENSION trial is a randomised controlled, parallel-group superiority multicenter trial. Patients with (suspected) infected necrotising pancreatitis with an indication for intervention and in whom both treatment modalities are deemed possible, will be randomised to either an endoscopic transluminal or a surgical step-up approach. During a 4 year study period, 98 patients will be enrolled from 24 hospitals of the Dutch Pancreatitis Study Group. The primary endpoint is a composite of death and major complications within 6 months following randomisation. Secondary endpoints include complications such as pancreaticocutaneous fistula, exocrine or endocrine pancreatic insufficiency, need for additional radiological, endoscopic or surgical intervention, the need for necrosectomy after drainage, the number of (re-)interventions, quality of life, and total direct and indirect costs. DISCUSSION: The TENSION trial will answer the question whether an endoscopic step-up approach reduces the combined primary endpoint of death and major complications, as well as hospital stay and related costs compared with a surgical step-up approach in patients with infected necrotising pancreatitis.
Assuntos
Infecções Bacterianas/cirurgia , Pancreatite Necrosante Aguda/cirurgia , Infecções Bacterianas/complicações , Desbridamento/métodos , Drenagem/métodos , Endoscopia/métodos , Humanos , Procedimentos Cirúrgicos Minimamente Invasivos/métodos , Países Baixos , Pancreatite Necrosante Aguda/complicações , Resultado do TratamentoRESUMO
Hyperspectral Imaging (HSI) combines microscopy and spectroscopy to assess the spatial distribution of spectroscopically active compounds in objects, and has diverse applications in food quality control, pharmaceutical processes, and waste sorting. However, due to the large size of HSI datasets, it can be challenging to analyze and store them within a reasonable digital infrastructure, especially in waste sorting where speed and data storage resources are limited. Additionally, as with most spectroscopic data, there is significant redundancy, making pixel and variable selection crucial for retaining chemical information. Recent high-tech developments in chemometrics enable automated and evidence-based data reduction, which can substantially enhance the speed and performance of Non-Negative Matrix Factorization (NMF), a widely used algorithm for chemical resolution of HSI data. By recovering the pure contribution maps and spectral profiles of distributed compounds, NMF can provide evidence-based sorting decisions for efficient waste management. To improve the quality and efficiency of data analysis on hyperspectral imaging (HSI) data, we apply a convex-hull method to select essential pixels and wavelengths and remove uninformative and redundant information. This process minimizes computational strain and effectively eliminates highly mixed pixels. By reducing data redundancy, data investigation and analysis become more straightforward, as demonstrated in both simulated and real HSI data for plastic sorting.
RESUMO
For the extraction of spatially important regions from mass spectrometry imaging (MSI) data, different clustering methods have been proposed. These clustering methods are based on certain assumptions and use different criteria to assign pixels into different classes. For high-dimensional MSI data, the curse of dimensionality also limits the performance of clustering methods which are usually overcome by pre-processing the data using dimension reduction techniques. In summary, the extraction of spatial patterns from MSI data can be done using different unsupervised methods, but the robust evaluation of clustering results is what is still missing. In this study, we have performed multiple simulations on synthetic and real MSI data to validate the performance of unsupervised methods. The synthetic data were simulated mimicking important spatial and statistical properties of real MSI data. Our simulation results confirmed that K-means clustering with correlation distance and Gaussian Mixture Modeling clustering methods give optimal performance in most of the scenarios. The clustering methods give efficient results together with dimension reduction techniques. From all the dimension techniques considered here, the best results were obtained with the minimum noise fraction (MNF) transform. The results were confirmed on both synthetic and real MSI data. However, for successful implementation of MNF transform the MSI data requires to be of limited dimensions.
Assuntos
Diagnóstico por Imagem , Análise por Conglomerados , Espectrometria de Massas/métodos , Distribuição NormalRESUMO
The development of portable NIR instruments facilitates widespread use among non-specialists. However, untrained operators may follow non-optimal measurement procedures. This work investigates how different factors in the measurement procedure influence the spectra of pig feed samples produced by SCiO, a handheld NIR. Measurement conditions were studied by means of Design of Experiments and evaluated with analysis of variance - simultaneous component analysis (ANOVA-SCA or ASCA). We quantified and visualized how measurement distance, angle, background lighting, the use of plastic lids and different devices interactively affect the resulting spectra. The samples could be distinguished with 100% accuracy with Partial Least Squares-Discriminant Analysis (PLS-DA) a scanning distance of 0.5 cm. Replication of the experiment with special attention to reproducing the conditions still lead to some differences, which highlights both the challenges in controlling conditions and the importance of considering them. Based on the results, generalizable guidelines for acceptance of spectra were proposed for this case study. Of main importance are performing measurements at distances of 0.5 cm or at least in an environment without background lighting. Overall, the provided guidelines for measurement conditions and a methodology to investigate this for other devices are a key enabler to spreading handheld spectrometry to a non-expert audience.
Assuntos
Plásticos , Espectroscopia de Luz Próxima ao Infravermelho , Animais , Análise Discriminante , Análise dos Mínimos Quadrados , Espectrofotometria , Espectroscopia de Luz Próxima ao Infravermelho/métodos , SuínosRESUMO
River water is an important source of Dutch drinking water. For this reason, continuous monitoring of river water quality is needed. However, comprehensive chemical analyses with high-resolution gas chromatography [GC]-mass spectrometry [MS]/liquid chromatography [LC]-MS are quite tedious and time consuming; this makes them poorly fit for routine water quality monitoring and, therefore, many pollution events are missed. Phytoplankton are highly sensitive and responsive to toxicity, which makes them highly usable for effect-based water quality monitoring. Flow cytometry can measure the optical properties of phytoplankton every hour, generating a large amount of information-rich data in one year. However, this requires chemometrics, as the resulting fingerprints need to be processed into information about abnormal phytoplankton behaviour. We developed Discriminant Analysis of Multi-Aspect CYtometry (DAMACY) to model the "normal condition" of the phytoplankton community imposed by diurnal, meteorological, and other exogenous influences. DAMACY first describes the cellular variability and distribution of phytoplankton in each measurement using principal component analysis, and then aims to find subtle differences in these phytoplankton distributions that predict normal environmental conditions. Deviations from these normal environmental conditions indicated abnormal phytoplankton behaviour that happened alongside pollution events measured with the GC/MS and LC/MS systems. Thus, our results demonstrate that flow cytometry in combination with chemometrics may be used for an automated hourly assessment of river water quality and as a near real-time early warning for detecting harmful known or unknown contaminants. Finally, both the flow cytometer and the DAMACY algorithm run completely autonomous and only requires maintenance once or twice per year. The warning system results may be uploaded automatically, so that drinking water companies may temporary stop pumping water whenever abnormal phytoplankton behaviour is detected. In the case of prolonged abnormal phytoplankton behaviour, comprehensive analysis may still be used to identify the chemical compound, its origin, and toxicity.