RESUMO
The impact behaviour of flax fibre-reinforced polymer (FFRP) renovated coconut fibre-reinforced concrete (CFRC) slabs was investigated through two series of experiments and theoretical analysis. The first experiment was carried out to find out the effectiveness of FFRP retrofitted method for the partly damaged concrete structure and its performance under impact loadings. The renovation process was applied on the pre-cracked rectangular CFRC slabs of 600 mm × 300 mm × 50 mm with FFRP laminates, before the repeated impact tests. Then, the parameters of these slabs, i.e., impact force history, deflection history and damage pattern, were discussed in detail. Another experiment was conducted on the FFRP-CFRC square slabs with a dimension of 600 mm × 600 mm × 50 mm. Based on test results, the effect of different FFRP configurations was discussed to find out the effective reinforcement method. In addition, the two-degree-of-freedom spring-mass model was applied to predict the impact force. Results demonstrate that FFRP composites have a good potential to be utilised as renovated construction materials under dynamic load conditions.
RESUMO
Poly (lactic) acid (PLA) composites have made their way into various applications that may require thermoforming to produce 3D shapes. Wrinkles are common in many forming processes and identification of the forming parameters to prevent them in the useful part of the mechanical component is a key consideration. Better prediction of such defects helps to significantly reduce the time required for a tooling design process. The purpose of the experiment discussed here is to investigate the effects of different test parameters on the occurrence of deformations during sheet forming of double curvature shapes with bamboo fabric reinforced-PLA composites. The results demonstrated that the domes formed using hot tooling conditions were better in quality than those formed using cold tooling conditions. Wrinkles were more profound in the warp direction of the composite domes compared to the weft direction. Grid Strain Analysis (GSA) identifies the regions of severe deformation and provides useful information regarding the optimisation of processing parameters.
RESUMO
Petroleum based thermoplastics are widely used in a range of applications, particularly in packaging. However, their usage has resulted in soaring pollutant emissions. Thus, researchers have been driven to seek environmentally friendly alternative packaging materials which are recyclable as well as biodegradable. Due to the excellent mechanical properties of natural fibres, they have been extensively used to reinforce biopolymers to produce biodegradable composites. A detailed understanding of the properties of such composite materials is vital for assessing their applicability to various products. The present review discusses several functional properties related to packaging applications in order to explore the potential of bamboo fibre fabric-poly (lactic) acid composites for packaging applications. Physical properties, heat deflection temperature, impact resistance, recyclability and biodegradability are important functional properties of packaging materials. In this review, we will also comprehensively discuss the chronological events and applications of natural fibre biopolymer composites.
RESUMO
Polymer nanofibers, with diameters in the nanometer range, possess larger surface areas per unit mass and permit easier addition of surface functionalities compared with polymer microfibers. Hence, polymer nanofiber mats are being considered for use as filters, scaffolds for tissue engineering, protective clothing, reinforcement in composite materials and sensors. Although some of these applications are in the development stage, a few have been commercially exploited. Research on polymer nanofibers, nanofiber mats, and their applications has seen a remarkable growth over the last few years. However, a review of the various issues related to these nanofibers has not been published. This article presents a review of the recent trends in the processing methods and characterization techniques for polymer nanofibers. Research challenges and future trends in the processing and characterization of polymer nanofibers are discussed in the article. Five processing methods have been examined in this review, namely drawing, template synthesis, phase separation, self-assembly, and electrospinning. Among these methods, electrospinning has been used to convert a large variety of polymers into nanofibers and may be the only process that has the potential for mass production. The structure, morphology, and geometry of nanofibers and the porosity and tensile properties of nanofiber mats can be investigated through conventional techniques and instruments. But new techniques are needed for the mechanical testing of single nanofibers. Although measurement of mechanical properties such as tensile modulus, strength, and elongation is difficult because of the small diameters of the fibers, these properties are crucial for the proper use of nanofiber mats.