RESUMO
Prompt and robust bone regeneration has been clinically achieved using supraphysiological doses of bone morphogenetic protein-2 (BMP-2) to overcome the short half-life and rapid clearance. However, uncontrolled burst release of exogenous BMP-2 causes severe complications such as heterotopic ossification and soft tissue inflammation. Therefore, numerous researches have focused on developing a new BMP-2 delivery system for a sustained release profile by immobilizing BMP-2 in various polymeric vehicles. Herein, to avoid denaturation of BMP-2 and enhance therapeutic action via localized delivery, a complex coacervate consisting of fucoidan, a marine-derived glycosaminoglycan, and poly-l-lysine (PLL) is fabricated. Superior BMP-2 binding ability and electrostatic interaction-driven engulfment enable facile and highly efficient microencapsulation of BMP-2. The microencapsulation ability of the coacervate significantly improves BMP-2 bioactivity and provides protection against antagonist and proteolysis, while allowing prolonged release. Moreover, BMP-2 containing coacervate is coated on conventional collagen sponges. The bioactivity and localized bone regenerating ability are confirmed through in vitro (human-derived stem cells), and in vivo (calvarial bone defect model) evaluations.
Assuntos
Proteína Morfogenética Óssea 2 , Regeneração Óssea , Osso e Ossos , Colágeno , Humanos , OsteogêneseRESUMO
Vascular access stenosis predominantly occurs as a result of neointimal hyperplasia (NH) formation at the anastomosis. Moreover, in the presence of NH, transforming growth factor-beta (TGF-ß) promotes vascular smooth muscle cell (VSMC) proliferation. Extracellular vesicles (EVs) released by endothelial cells are closely associated with vascular dysfunction. Here, we investigated the effects of EVs on TGF-ß signaling and VSMC proliferation. Specifically, EVs were collected from the culture medium of indoxyl sulfate (IS)-treated human umbilical vein endothelial cells and used (2 × 106) to stimulate human aortic smooth muscle cells (SMCs) (1 × 106). Western blotting was performed to assess the levels of Akt, ERK1/2, p38 MAPK, and Smad3. BrdU proliferation assays, quantitative PCR, and ELISA assays were performed to evaluate SMC proliferation and TGF-ß production. The IS-induced EVs stimulated the proliferation of aortic SMCs in a concentration-dependent manner. The EVs both contained TGF-ß and promoted TGF-ß production by SMCs by phosphorylating Akt, ERK1/2, p38 MAPK, and Smad3, which was significantly inhibited by an anti-TGF-ß antibody. SMC proliferation was suppressed by both an anti-TGF-ß antibody and inhibitors of the downstream factors. These results suggest that EVs are involved in the pathogenesis of vascular access stenosis by modulating TGF-ß signaling in VSMCs under uremic conditions.
Assuntos
Proliferação de Células , Vesículas Extracelulares/efeitos dos fármacos , Células Endoteliais da Veia Umbilical Humana/efeitos dos fármacos , Indicã/farmacologia , Músculo Liso Vascular/metabolismo , Miócitos de Músculo Liso/metabolismo , Neointima , Comunicação Parácrina , Fator de Crescimento Transformador beta/metabolismo , Uremia/metabolismo , Células Cultivadas , MAP Quinases Reguladas por Sinal Extracelular/metabolismo , Vesículas Extracelulares/metabolismo , Células Endoteliais da Veia Umbilical Humana/metabolismo , Humanos , Músculo Liso Vascular/patologia , Miócitos de Músculo Liso/patologia , Fosforilação , Proteínas Proto-Oncogênicas c-akt/metabolismo , Transdução de Sinais , Proteína Smad3/metabolismo , Uremia/patologia , Proteínas Quinases p38 Ativadas por Mitógeno/metabolismoRESUMO
BACKGROUND AND OBJECTIVES: The 30-min rule has been used to maintain a core temperature (CT) of red-blood-cell (RBC) units below 10°C during transportation. We evaluated the utility of temperature-sensitive indicators (TIs) to monitor the surface temperature (ST) of RBC units and to explore whether TIs can help with compliance with the 30-min rule by extrapolating or correlating temperature change with time. MATERIALS AND METHODS: Two US FDA-approved TIs, Safe-T-Vue 10 (STV10; Temptime Corporation, Morris Plains, NJ, USA) and Timestrip Blood Temp 10 (BT10; Timestrip UK Ltd, Cambridge, UK), were attached to 50 RBC units. After issue, their colour change indicating 10°C was monitored, and temperature excursions were measured by standard reading. In additional 18 RBC units, both ST and CT were monitored simultaneously. RESULTS: In 50 RBC units, 94% of STV10 and 100% of BT10 showed colour change indicating 10°C within 30 min; 4% of STV10 and 18% of BT10 showed it during transportation. The time for colour change indicating 10°C differed significantly between STV10 and BT10 (19·0 vs. 5·6 min, P < 0·001). In additional 18 RBC units, 83·3% of STV10, 100% of BT10 and 88·9% of CT reached 10°C within 30 min, and the time for colour change indicating 10°C was 24·4 min in STV10, 14·6 min in BT 10 and 24·2 min in CT (P < 0·001). CONCLUSION: In two TIs, the time for colour change indicating 10°C varied considerably. To enhance the utility of TIs, further improvement and standardization would be needed.
Assuntos
Preservação de Sangue/normas , Eritrócitos , Temperatura , Preservação de Sangue/métodos , Humanos , Indicadores e ReagentesRESUMO
BACKGROUND: Integrins play a critical role in carcinogenesis. Integrin ß1 localization is regulated by the guanosine-5'-triphosphate hydrolase Rab25 and integrin ß1 levels are elevated in the serum of colon cancer patients; thus, the present study examined the effects of epidermal growth factor (EGF) and Rab25 on integrin ß1 localization in colon cancer cells. METHODS: HCT116 human colon cancer cells were treated with increasing concentrations of EGF, and cell proliferation and protein expression were monitored by MTT and western blot analyses, respectively. Cell fractionation was performed to determine integrin ß1 localization in the membrane and cytosol. Integrin ß1 extracellular shedding was monitored by enzyme-linked immunosorbent assays (ELISAs) with culture supernatants from stimulated cells. HCT116 cells were transfected with Rab25-specific siRNA to determine the significance of Rab25 in integrin ß1 trafficking in the presence of EGF. RESULTS: Total integrin ß1 expression increased in response to EGF and subsequently decreased at 24 h post-stimulation. A similar decrease was observed in purified membrane fractions, whereas no changes were observed in cytosolic levels. ELISAs using media from stimulated cell cultures demonstrated increased integrin ß1 levels corresponding to the decrease observed in membrane fractions, suggesting that EGF induces integrin receptor shedding. EGF stimulation in Rab25-knockdown cells resulted in integrin ß1 accumulation in the membrane, suggesting that Rab25 promotes integrin endocytosis. CONCLUSIONS: Integrin ß1 is shed from colon cancer cells in response to EGF stimulation in a Rab25-dependent manner. These results further the present understanding of the role of integrin ß1 in colon cancer progression.
RESUMO
OBJECTIVES: This study evaluated the intraoral symmetry of dental caries in primary teeth as part of a study of caries patterns in primary dentition. STUDY DESIGN: The data for 4,800 5-year-old and 4,379 8-year-old children in this study were from the 2012 Korean national oral health survey. Pearson correlation coefficients of the decayed and filled surface (dfs) values ranged from 0.436 (lower primary canines) to 0.835 (upper primary central incisors) for the right and left primary teeth and from 0.084 (right primary central incisor) to 0.457 (left primary second molar) for the upper and lower primary dentition (P< 0.01). RESULTS: The upper and lower dfs values differed significantly (P< 0.05) when the right and left primary second molars were excluded. The left or right primary data without caries ranged from 56.4% (lower of first and second primary molars) to 99.7% (lower primary central incisors). The bilateral caries among cases with one or more in the right or left primary teeth ranged from 25.0% (lower lateral primary incisor) to 72.7% (upper primary central incisors). CONCLUSIONS: These results suggested that dental caries in primary teeth show bilateral symmetry and differences in the degree of symmetry according to the teeth set or surface set of the homologous teeth.
Assuntos
Cárie Dentária/epidemiologia , Dente Decíduo , Criança , Pré-Escolar , Índice CPO , Inquéritos de Saúde Bucal , Humanos , Mandíbula , Maxila , República da Coreia/epidemiologiaRESUMO
BACKGROUND: TNF-α has been postulated to be a critical mediator contributing to airway inflammation. The purpose of this study was to evaluate the role of TNF-α in the induction of Th17 and Th2 cells related to asthma pathogenesis. OBJECTIVE: To evaluate detailed mechanisms for the modulation of IL-23 by TNF-α in sensitization period. METHODS: During sensitization period, 10µg of rat anti-mouse TNF-α mAb was intravenously administrated one hour before the application of OVA and 0.1µg of LPS. To see the relation between TNF-α and associated effectors cytokine, we replenished TNF-α KO mice with IL-23 during sensitization period. To assess cellular resources, CD11c+ cells isolated from lung tissue after sensitization were treated with anti-TNF-α Ab. RESULTS: Treatment of anti-TNF-α mAb during sensitization period significantly reduced airway eosinophilia, serum OVA-specific IgE levels and methacholine AHR compared to isotype Ab. Anti-TNF-α mAb treated mice showed significant reduction in the levels of IL-23 after sensitization in bronchoalveolar lavage fluid (BALF) as well as IL-17A, IL-4 levels in BALF after challenge compared with isotype Ab treated mice. Supplementation of IL-23 in TNF-α KO mice resulted in complete restoration of eosinophilic airway inflammation, AHR, and IL-17A and IL-4 expression in CD4+ T cells. Anti-TNF-α mAb treatment after sensitization significantly diminished the population of IL-23p19-secreting CD11c+ cells in lung. CONCLUSION: TNF-α plays an important role in the development of airway inflammation by enhancing IL-23/Th17 and Th2 immune responses.
Assuntos
Asma/imunologia , Eosinofilia/imunologia , Subunidade p19 da Interleucina-23/imunologia , Células Th17/imunologia , Células Th2/imunologia , Fator de Necrose Tumoral alfa/imunologia , Animais , Anticorpos Monoclonais/imunologia , Líquido da Lavagem Broncoalveolar/química , Líquido da Lavagem Broncoalveolar/imunologia , Antígeno CD11c/metabolismo , Linfócitos T CD4-Positivos/imunologia , Células Cultivadas , Eosinófilos/imunologia , Feminino , Imunoglobulina E/sangue , Interleucina-17/imunologia , Subunidade p19 da Interleucina-23/metabolismo , Subunidade p19 da Interleucina-23/farmacologia , Interleucina-4/imunologia , Pulmão/imunologia , Pulmão/patologia , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Knockout , Ovalbumina/imunologia , Fator de Necrose Tumoral alfa/antagonistas & inibidores , Fator de Necrose Tumoral alfa/genéticaRESUMO
Local lymph node assay: 5-bromo-2-deoxyuridine-flow cytometry method (LLNA: BrdU-FCM) is a modified non-radioisotopic technique with the additional advantages of accommodating multiple endpoints with the introduction of FCM, and refinement and reduction of animal use by using a sophisticated prescreening scheme. Reliability and accuracy of the LLNA: BrdU-FCM was determined according to OECD Test Guideline (TG) No. 429 (Skin Sensitization: Local Lymph Node Assay) performance standards (PS), with the participation of four laboratories. Transferability was demonstrated through successfully producing stimulation index (SI) values for 25% hexyl cinnamic aldehyde (HCA) consistently greater than 3, a predetermined threshold, by all participating laboratories. Within- and between-laboratory reproducibility was shown using HCA and 2,4-dinitrochlorobenzene, in which EC2.7 values (the estimated concentrations eliciting an SI of 2.7, the threshold for LLNA: BrdU-FCM) fell consistently within the acceptance ranges, 0.025-0.1% and 5-20%, respectively. Predictive capacity was tested using the final protocol version 1.3 for the 18 reference chemicals listed in OECD TG 429, of which results showed 84.6% sensitivity, 100% specificity, and 88.9% accuracy compared with the original LLNA. The data presented are considered to meet the performance criteria for the PS, and its predictive capacity was also sufficiently validated.
Assuntos
Acroleína/análogos & derivados , Bromodesoxiuridina , Dinitroclorobenzeno/toxicidade , Citometria de Fluxo , Ensaio de Proficiência Laboratorial , Ensaio Local de Linfonodo , Linfonodos/efeitos dos fármacos , Acroleína/toxicidade , Animais , Feminino , Citometria de Fluxo/normas , Fidelidade a Diretrizes , Guias como Assunto , Humanos , Linfonodos/patologia , Camundongos , Camundongos Endogâmicos BALB C , Variações Dependentes do Observador , Valor Preditivo dos Testes , Reprodutibilidade dos Testes , República da CoreiaRESUMO
3D printing technology enables the production of creative and personalized food products that meet consumer needs, such as an attractive visual appearance, fortification of specific nutrients, and modified textures. To popularize and diversify 3D-printed foods, an evaluation of the printing feasibility of various food pastes, including materials that cannot be printed natively, is necessary. Most animal resources, such as meat, milk, and eggs, are not inherently printable; therefore, the rheological properties governing printability should be improved through pre-/post-processing or adding appropriate additives. This review provides the latest progress in extrusion-based 3D printing of animal resource-based inks. In addition, this review discusses the effects of ink composition, printing conditions, and post-processing on the printing performance and characteristics of printed constructs. Further research is required to enhance the sensory quality and nutritional and textural properties of animal resource-based printed foods.
RESUMO
Despite the advancements in skin bioengineering, 3D skin constructs are still produced as flat tissues with open edges, disregarding the fully enclosed geometry of human skin. Therefore, they do not effectively cover anatomically complex body sites, e.g., hands. Here, we challenge the prevailing paradigm by engineering the skin as a fully enclosed 3D tissue that can be shaped after a body part and seamlessly transplanted as a biological clothing. Our wearable edgeless skin constructs (WESCs) show enhanced dermal extracellular matrix (ECM) deposition and mechanical properties compared to conventional constructs. WESCs display region-specific cell/ECM alignment, as well as physiologic anisotropic mechanical properties. WESCs replace the skin in full-thickness wounds of challenging body sites (e.g., mouse hindlimbs) with minimal suturing and shorter surgery time. This study provides a compelling technology that may substantially improve wound care and suggests that the recapitulation of the tissue macroanatomy can lead to enhanced biological function.
Assuntos
Bioengenharia , Matriz Extracelular , Humanos , Engenharia , Engenharia TecidualRESUMO
Adoptive cell therapy (ACT) with antigen-specific T cells is a promising treatment approach for solid cancers. Interleukin-2 (IL-2) has been utilized in boosting the efficacy of ACT. However, the clinical applications of IL-2 in combination with ACT is greatly limited by short exposure and high toxicities. Herein, a complex coacervate was designed to intratumorally deliver IL-2 in a sustained manner and protect against proteolysis. The complex coacervate consisted of fucoidan, a specific IL-2 binding glycosaminoglycan, and poly-l-lysine, a cationic counterpart (FPC2). IL-2-laden FPC2 exhibited a preferential bioactivity in ex vivo expansion of CD8+T cells over Treg cells. Additionally, FPC2 was embedded in pH modulating injectable gel (FPC2-IG) to endure the acidic tumor microenvironment. A single intratumoral administration of FPC2-IG-IL-2 increased expansion of tumor-infiltrating cytotoxic lymphocytes and reduced frequencies of myeloid populations. Notably, the activation and persistency of tumor-reactive T cells were observed only in the tumor site, not in the spleen, confirming a localized effect of FPC2-IG-IL-2. The immune-favorable tumor microenvironment induced by FPC2-IG-IL-2 enabled adoptively transferred TCR-engineered T cells to effectively eradicate tumors. FPC2-IG delivery system is a promising strategy for T-cell-based immunotherapies.
RESUMO
Organoids are self-organized and miniatured in vitro models of organs and recapitulate key aspects of organ architecture and function, leading to rapid progress in understanding tissue development and disease. However, current organoid culture systems lack accurate spatiotemporal control over biochemical and physical cues that occur during in vivo organogenesis and fail to recapitulate the complexity of organ development, causing the generation of immature organoids partially resembling tissues in vivo. Recent advances in biomaterials and microengineering technologies paved the way for better recapitulation of organ morphogenesis and the generation of anatomically-relevant organoids. For this, understanding the native ECM components and organization of a target organ is essential in providing rational design of extracellular scaffolds that support organoid growth and maturation similarly to the in vivo microenvironment. In this review, we focus on epithelial organoids that resemble the spatial distinct structure and function of organs lined with epithelial cells including intestine, skin, lung, liver, and kidney. We first discuss the ECM diversity and organization found in epithelial organs and provide an overview of developing hydrogel systems for epithelial organoid culture emphasizing their key parameters to determine cell fates. Finally, we review the recent advances in tissue engineering and microfabrication technologies including bioprinting and microfluidics to overcome the limitations of traditional organoid cultures. The integration of engineering methodologies with the organoid systems provides a novel approach for instructing organoid morphogenesis via precise spatiotemporal modulation of bioactive cues and the establishment of high-throughput screening platforms.
RESUMO
Peripheral nerve injury causes severe loss of motor and sensory functions, consequently increasing morbidity in affected patients. An autogenous nerve graft is considered the current gold standard for reconstructing nerve defects and recovering lost neurological functions; however, there are certain limitations to this method, such as limited donor nerve supply. With advances in regenerative medicine, recent research has focused on the fabrication of tissue-engineered nerve grafts as promising alternatives to the autogenous nerve grafts. In this study, we designed a nerve guidance conduit using an electrospun poly(lactide-co-ε-caprolactone) (PLCL) membrane with a visible light-crosslinked gelatin hydrogel. The PLCL nanoporous membrane with permeability served as a flexible and non-collapsible epineurium for the nerve conduit; the inner-aligned gelatin hydrogel paths were fabricated via 3D printing and a photocrosslinking system. The resultant gelatin hydrogel with microgrooved surface pattern was established as a conducting guidance path for the effective regeneration of axons and served as a reservoir that can incorporate and release bioactive molecules. From in vivo performance tests using a rat sciatic nerve defect model, our PLCL/gelatin conduit demonstrated successful axonal regeneration, remyelination capacities and facilitated functional recovery. Hence, the PLCL/gelatin conduit developed in this study is a promising substitute for autogenous nerve grafts. STATEMENT OF SIGNIFICANCE: Nerve guidance conduits (NGCs) are developed as promising recovery techniques for bridging peripheral nerve defects. However, there are still technological limitations including differences in the structures and components between natural peripheral nerve and NGCs. In this study, we designed a NGC composed of an electrospun poly(lactide-co-ε-caprolactone) (PLCL) membrane and 3D printed inner gelatin hydrogel to serve as a flexible and non-collapsible epineurium and a conducting guidance path, respectively, to mimic the fascicular structure of the peripheral nerve. In particular, in vitro cell tests clearly showed that gelatin hydrogel could guide the cells and function as a reservoir that incorporate and release nerve growth factor. From in vivo performance tests, our regenerative conduit successfully led to axonal regeneration with effective functional recovery.
Assuntos
Hidrogéis , Regeneração Nervosa , Poliésteres/química , Animais , Gelatina/farmacologia , Humanos , Hidrogéis/farmacologia , Porosidade , Impressão Tridimensional , Ratos , Ratos Sprague-DawleyRESUMO
Despite recent advancements in our understanding of genetic etiology and its molecular and physiological consequences, it is not yet clear what genetic features determine the inheritance pattern of a disease. To address this issue, we conducted whole exome sequencing analysis to characterize genetic variants in 1,180 Korean patients with neurological symptoms. The diagnostic yield for definitive pathogenic variant findings was 50.8%, after including 33 cases (5.9%) additionally diagnosed by reanalysis. Of diagnosed patients, 33.4% carried inherited variants. At the genetic level, autosomal recessive-inherited genes were characterized by enrichments in metabolic process, muscle organization and metal ion homeostasis pathways. Transcriptome and interactome profiling analyses revealed less brain-centered expression and fewer protein-protein interactions for recessive genes. The majority of autosomal recessive genes were more tolerant of variation, and functional prediction scores of recessively-inherited variants tended to be lower than those of dominantly-inherited variants. Additionally, we were able to predict the rates of carriers for recessive variants. Our results showed that genes responsible for neurodevelopmental disorders harbor different molecular mechanisms and expression patterns according to their inheritance patterns. Also, calculated frequency rates for recessive variants could be utilized to pre-screen rare neurodevelopmental disorder carriers.
RESUMO
We present a single cell-gap transflective liquid crystal (LC) device using a homogeneous alignment polyimide (H-PI) mixed with a liquid crystalline reactive monomer that is able to vertically align the LC. We obtain two different pretilt angles in each pixel through the region by region control of the UV exposure time. The smaller pretilt angle is used to obtain a half-wave phase retardation for the transmissive part, whereas the larger pretilt angle is used to obtain a quarter-wave phase retardation for the reflective part.
Assuntos
Cristais Líquidos/química , Fotometria/instrumentação , Refratometria/instrumentação , Resinas Sintéticas/química , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
Heart failure following myocardial infarction (MI), the primary cause of mortality worldwide, is the consequence of cardiomyocyte death or dysfunction. Clinical efforts involving the delivery of growth factors (GFs) and stem cells with the aim of regenerating cardiomyocytes for the recovery of structural and functional integrity have largely failed to deliver, mainly due to short half-lives and rapid clearance in in vivo environments. In this work, we selected and genetically fused four biofunctional peptides possessing angiogenic potential, originating from extracellular matrix proteins and GFs, to bioengineered mussel adhesive protein (MAP). We found that MAPs fused with vascular endothelial growth factor (VEGF)-derived peptide and fibronectin-derived RGD peptide significantly promoted the proliferation and migration of endothelial cells in vitro. Based on these characteristics, we fabricated advanced double-layered adhesive microneedle bandages (DL-AMNBs) consisting of a biofunctional MAP-based root and a regenerated silk fibroin (SF)-based tip, allowing homogeneous distribution of the regenerative factor via swellable microneedles. Our developed DL-AMNB system clearly demonstrated better preservation of cardiac muscle and regenerative effects on heart remodeling in a rat MI model, which might be attributed to the prolonged retention of therapeutic peptides as well as secure adhesion between the patch and host myocardium by MAP-inherent strong underwater adhesiveness.
Assuntos
Bivalves , Fator A de Crescimento do Endotélio Vascular , Animais , Bandagens , Células Endoteliais , Ratos , CicatrizaçãoRESUMO
Damaged vascular structures after critical diseases are difficult to completely restore to their original conditions without specific treatments. Thus, therapeutic angiogenesis has been spotlighted as an attractive strategy. However, effective strategies for mimicking angiogenic processes in the body have not yet been developed. In the present work, we developed a bioengineered mussel adhesive protein (MAP)-based novel therapeutic angiogenesis platform capable of spatiotemporally releasing angiogenic growth factors to target disease sites with high viscosity and strong adhesiveness in a mucus-containing environment with curvature. Polycationic MAP formed complex coacervate liquid microdroplets with polyanionic hyaluronic acid and subsequently gelated into microparticles. Platelet-derived growth factor (PDGF), which is a late-phase angiogenic factor, was efficiently encapsulated during the process of coacervate microparticle formation. These PDGF-loaded microparticles were blended with vascular endothelial growth factor (VEGF), which is the initial-phase angiogenic factor, in MAP-based pregel solution and finally crosslinked in situ into a hydrogel at the desired site. The microparticle-based angiogenic-molecule spatiotemporal sequential (MASS) release platform showed good adhesion and underwater durability, and its elasticity was close to that of target tissue. Using two in vivo critical models, i.e., full-thickness excisional wound and myocardial infarction models, the MASS release platform was evaluated for its in vivo feasibility as an angiogenesis-inducing platform and demonstrated effective angiogenesis as well as functional regenerative efficacy. Based on these superior physicochemical characteristics, the developed MASS release platform could be successfully applied in many biomedical practices as a waterproof bioadhesive with the capability for the spatiotemporal delivery of angiogenic molecules in the treatment of ischemic diseases.
Assuntos
Indutores da Angiogênese , Medicina Regenerativa , Adesivos , Neovascularização Fisiológica , Fator de Crescimento Derivado de Plaquetas , Fator A de Crescimento do Endotélio VascularRESUMO
Adipose tissue engineering represents a valuable alternative for reconstructive and cosmetic applications to restore soft tissue loss. Herein, for the development of a tissue-engineered adipose substitute, we designed an injectable thermoresponsive tissue adhesive hydrogel by grafting bioengineered mussel adhesive protein (MAP) with poly(N-isopropylacrylamide) (PNIPAM) and incorporating decellularized adipose tissue (DAT) powder as a biochemical cue. The body temperature-activated PNIPAM-grafted MAP (MAP-PNIPAM) hydrogel showed 3.2-times higher water retention ability, high porosity, and 8.4-times stronger tissue adhesive properties compared to the PNIPAM gel alone with pore collapse. Moreover, we found that the introduction of 5 wt% DAT powder had adipo-inductive and adipo-conductive effects, which might be due to the provision of biochemical substrates enriched in collagen and laminin for cell-cell and cell-matrix interactions. In vivo subcutaneous injection of the adipose-derived stem cell-laden DAT-incorporated MAP-PNIPAM hydrogel further demonstrated better volume maintenance, angiogenesis, and lipid accumulation than control injectable alginate gel or DAT powder only. Collectively, our injectable body temperature-activated tissue adhesive MAP-PNIPAM hydrogel system with a decellularized extracellular matrix source can be utilized as a promising alternative for tissue-specific regenerative stem cell therapy. STATEMENT OF SIGNIFICANCE: For adipose tissue engineering, we designed an injectable body temperature-activated adhesive hydrogel by grafting bioengineered mussel adhesive protein (MAP) with poly(N-isopropylacrylamide) (PNIPAM) and incorporating adipose-derived stem cells (ASCs) and decellularized adipose tissue (DAT) powder as regenerative cell and ECM sources. PNIPAM has been widely used for cell sheet engineering, but not for cell carriers due to its dramatic thermal contractive properties. By conjugation with hydrophilic MAP, water retention ability and tissue adhesiveness of the scaffold increased by a factor of 3.2- and 8.4-fold, respectively, which are highly required for survival of the transplanted cells and interfacial integration with host tissues. In vivo performance demonstrated that ASCs/DAT powder-laden MAP-PNIPAM hydrogel achieved better volume maintenance, neovascularization, and adipogenesis than control injectable groups.
Assuntos
Adesivos , Hidrogéis , Tecido Adiposo , Temperatura Corporal , Matriz Extracelular , Engenharia TecidualRESUMO
Peripheral nerve injury results in significant sensory and motor functional deficits. Although direct neurorrhaphy in the early phase may reduce its devastating effects, direct end-to-end neurorrhaphy is sometimes impossible owing to a defect at the injured site of the nerve. Autogenous nerve graft is a primary consideration for peripheral nerve defects; however, significant morbidity of the donor site is inevitable. Recently, the treatment using engineered synthetic nerve conduits has been regarded as a promising strategy to promote the regeneration of peripheral nerve defects. In this study, we developed longitudinally oriented collagen hydrogel-grafted elastic nerve guidance conduits (NGC) to reconstruct sciatic nerve defects. An elastic NGC was prepared by using poly(lactide-co-caprolactone) (PLCL), and electrospun PLCL was adopted to fabricate nanoporous structures with appropriate permeability for nerve regeneration. Oriented collagen hydrogels were prepared by the 3D printing method to achieve a microscale hydrogel pattern. Based on sciatic nerve injury models in rats, we confirmed the beneficial effects of the NGC with 3D printed collagen hydrogel on axonal regeneration and remyelination along with superior functional recovery in comparison with the NGC filled with the bulk collagen hydrogel. It is believed that the aligned collagen hydrogels provide a preferable environment for nerve regeneration, functioning as an oriented guidance path. In conclusion, the PLCL nerve guide conduit containing a 3D printed aligned collagen hydrogel can be useful for peripheral nerve regeneration.
Assuntos
Hidrogéis , Regeneração Nervosa , Animais , Colágeno , Porosidade , Impressão Tridimensional , Ratos , Ratos Sprague-DawleyRESUMO
A substantial portion of Mendelian disease patients suffers from genetic variants that are inherited in a recessive manner. A precise understanding of pathogenic recessive variants in a population would assist in pre-screening births of such patients. However, a systematic understanding of the contribution of recessive variants to Mendelian diseases is still lacking. Therefore, genetic diagnosis and variant discovery of 553 undiagnosed Korean patients with complex neurodevelopmental problems (KND for Korean NeuroDevelopmental cohort) were performed using whole exome sequencing of patients and their parents. Disease-causing variants, including newly discovered variants, were identified in 57.5% of the probands of the KND cohort. Among the patients with the previous reported pathogenic variants, 35.1% inherited these variants in a recessive manner. Genes that cause recessive disorders in our cohort tend to be less constrained by loss-of-function variants and were enriched in lipid metabolism and mitochondrial functions. This observation was applied to an estimation that approximately 1 in 17 healthy Korean individuals carry at least one of these pathogenic variants that develop severe neurodevelopmental problems in a recessive manner. Furthermore, the feasibility of these genes for carrier screening was evaluated. Our results will serve as a foundation for recessive variant screening to reduce occurrences of rare Mendelian disease patients. Additionally, our results highlight the utility and necessity of whole exome sequencing-based diagnostics for improving patient care in a country with a centralized medical system.
Assuntos
Genes Recessivos/genética , Triagem de Portadores Genéticos/métodos , Transtornos do Neurodesenvolvimento/genética , Adolescente , Criança , Pré-Escolar , Estudos de Viabilidade , Feminino , Triagem de Portadores Genéticos/estatística & dados numéricos , Humanos , Lactente , Recém-Nascido , Masculino , Transtornos do Neurodesenvolvimento/diagnóstico , Transtornos do Neurodesenvolvimento/epidemiologia , República da Coreia/epidemiologia , Sequenciamento do Exoma , Adulto JovemRESUMO
This study compared the quality of life (QOL) between Korean and Korean American older adults. The participants included 306 older adults (155 Korean, 151 Korean American) age 65 and older who met eligibility criteria and agreed to participate in the study. No significant difference was found in QOL between Korean and Korean American older adults. Differences in the subcategories of QOL between the two groups in cluded higher scores for the Korean older adults in physical functioning, social functioning, and body pain. Scores for the subcategories of role limitations due to physical problems and vitality were higher for the Korean American older adults. Multiple regression analysis revealed that the powerful predictors of QOL for both groups were self-esteem and activities of daily living (ADLs)/instrumental ADLs (IADLs). It is recommended that nursing interventions to increase self-esteem and performance of ADLs/IADLs be developed to enhance QOL among older adults.