Recombinant Human Parathyroid Hormone Biocomposite Promotes Bone-to-Tendon Interface Healing by Enhancing Tenogenesis, Chondrogenesis, and Osteogenesis in a Rabbit Model of Chronic Rotator Cuff Tears.

PURPOSE: To investigate the effect of recombinant human parathyroid hormone (rhPTH) biocomposite on bone-to-tendon interface (BTI) healing for surgical repair of a chronic rotator cuff tear (RCT) model of rabbit, focusing on genetic, histologic, biomechanical and micro-computed tomography (CT) evaluations. METHODS: Sixty-four rabbits were equally assigned to the 4 groups: saline injection (group A), nanofiber sheet alone (group B), rhPTH-soaked nanofiber sheet (nanofiber sheet was soaked with rhPTH, group C), and rhPTH biocomposite (rhPTH permeated the nanofiber sheet by coaxial electrospinning, group D). The release kinetics of rhPTH (groups C and D) was examined for 6 weeks in vitro. Nanofiber scaffolds were implanted on the surface of the repair site 6 weeks after the induction of chronic RCT. Genetic and histologic analyses were conducted 4 weeks after surgery. Furthermore, genetic, histologic, biomechanical, micro-CT, and serologic analyses were performed 12 weeks after surgery. RESULTS: In vivo, group D showed the highest collagen type I alpha 1 (COL1A1), collagen type III alpha 1 (COL3A1), and bone morphogenetic protein 2 (BMP-2) messenger RNA (mRNA) expression levels (all P < .001) 4 weeks after surgery; however, there were no differences between groups at 12 weeks postsurgery. After 12 weeks postsurgery, group D showed better collagen fiber continuity and orientation, denser collagen fibers, more mature bone-to-tendon junction, and greater fibrocartilage layer formation compared with the other groups (all P < .05). Furthermore, group D showed the highest load-to-failure rate (28.9 ± 2.0 N/kg for group A, 30.1 ± 3.3 N/kg for group B, 39.7 ± 2.7 N/kg for group C, and 48.2 ± 4.5 N/kg for group D, P < .001) and micro-CT outcomes, including bone and tissue mineral density, and bone volume/total volume rate (all P < .001) at 12 weeks postsurgery. CONCLUSIONS: In comparison to rhPTH-soaked nanofiber sheet and the other control groups, rhPTH biocomposite effectively accelerated BTI healing by enhancing the mRNA expression levels of COL1A1, COL3A1, and BMP-2 at an early stage and achieving tenogenesis, chondrogenesis, and osteogenesis at 12 weeks after surgical repair of a chronic RCT model of rabbit. CLINICAL RELEVANCE: The present study might be a transitional study to demonstrate the efficacy of rhPTH biocomposites on BTI healing for surgical repair of chronic RCTs as an adaptable polymer biomaterial in humans.

Spontaneous resolution of spinoglenoid ganglion cyst: a case series.

BACKGROUND: Spontaneous resolution of a spinoglenoid notch ganglion cyst (SGC) without surgical treatment has been rarely reported; however, we have encountered this phenomenon occasionally. Therefore, we aimed to describe a case series of consecutive patients with SGC in whom it spontaneously resolved without surgical treatment. METHODS: We retrospectively reviewed 12 patients with magnetic resonance imaging (MRI)-confirmed SGC in whom it resolved without surgical treatment between January 2011 and March 2023. We included patients without abnormally increased signal intensity or muscle atrophy due to denervation from suprascapular neuropathy on MRI. Resolution of the SGC was confirmed via MRI or ultrasound at the follow-up visit, and suprascapular neuropathy was assessed using electromyography and nerve conduction studies when needed. For functional assessments, the visual analog scale for pain and active range of motion of the shoulder were used to compare pre and postresolution follow-ups. RESULTS: Eleven men and 1 woman with a median age of 54.0 years (interquartile range [IQR] 37.0-65.3) were included in this study. The SGCs resolved spontaneously at a median of 13.2 months with an IQR of 8.2-23.0 after initial evaluation using MRI. The SGCs were multiloculated cysts with superior labrum anterior and posterior II-IX lesions, with a median diameter of 2.5 cm (IQR 2.0-2.8). The median visual analog scale for pain (pre-resolution 5.0 [IQR 4.0-7.0] vs postresolution 1.0 [IQR 0.0-1.0], P = .002) and internal rotation at the back (preresolution 8.0 [IQR 7.0-10.3] vs postresolution 7.5 [IQR 7.0-8.0], P = .034) were significantly improved after the resolution. CONCLUSIONS: Surgical treatment may not be necessary in all cases of SGC. Nonsurgical treatment may be a viable option in the absence of suprascapular nerve involvement or superior labrum anterior and posterior-related physical findings.

Comparison between osteonecrosis of the humeral and femoral heads - epidemiological analysis of the surgical trend using the nationwide claims database of the republic of Korea.

BACKGROUNDS: The humeral head is the second most common site of osteonecrosis, after the femoral head. However, compared to osteonecrosis of the femoral head (ONFH), epidemiological information on osteonecrosis of the humeral head (ONHH) is scarce. We hypothesised that different biomechanical properties of the shoulder from the hip joint might present different epidemiological characteristics of ONHH from those of the ONFH. To evaluate epidemiological differences, we compared trends in the surgical treatment of ONHH and ONFH using the nationwide medical claims database of the Republic of Korea (ROK). METHODS: We analysed epidemiological data from the Health Insurance Review and Assessment (HIRA) database of the ROK between 2008 and 2018. HIRA database contains almost all medical information in an anonymised form, including demographics, diagnoses, and types of surgical procedures, generated through healthcare practices in ROK. The annual incidence rates of ONHH and ONFH were calculated based on the total number of the general population. Demographics, annual incidence, and the proportion of post-traumatic osteonecrosis and surgical procedures were compared according to the anatomical site and the affected year. RESULTS: The total number of patients treated for ONHH and ONFH during the study period was 1,028 and 66,260, respectively. Although the incidence of ONHH increased, it is a relatively rare disease compared to ONFH. ONHH occurred more frequently in females, while ONFH occurred predominantly in male patients (p < 0.001). Surgical treatment for ONHH was most frequently performed in older patients (63.7%), whereas middle-aged patients had the largest proportion of ONFH (48.9%, p < 0.001). The proportion of post-traumatic osteonecrosis was significantly higher in the ONHH (5.1%) than in the ONFH (1.9%, p < 0.001). Arthroplasty was performed more frequently in the ONHH (96.0%) than in the ONFH (92.9%, p < 0.001). CONCLUSION: Despite the anatomical similarities between the hip and shoulder joints, the different biomechanical properties, such as weight-bearing functions, might cause epidemiological differences between ONHH and ONFH.

Can convertible metal-backed glenoid components replace cemented polyethylene glenoid components in anatomical total shoulder arthroplasty?

BACKGROUND: Anatomical total shoulder arthroplasty (aTSA) has been used to manage degenerative diseases such as primary osteoarthritis. An increase in the use of this procedure has led to several developments in humeral and glenoid components to improve patient outcomes. This study aimed to compare clinical and radiological outcomes of the newly-introduced convertible metal-backed glenoid components with cemented polyethylene glenoid components in aTSA, and to determine whether the new component would be comparable to a conventional one for reducing the burden of future revision or conversion surgeries. METHODS: Medical records of fifty patients who underwent aTSA with at least two years of follow-up were retrospectively reviewed. Eighteen patients received convertible metal-backed glenoid components with vitamin E1-coated liner (MB group), while thirty-two patients received conventional cemented polyethylene glenoid components (PE group). Pre- and postoperative clinical and radiological outcomes (acromion-greater tuberosity angle [AGA] and humeral lateral offset [LO]) at final follow-up were assessed. Radiolucent lines (RLLs) and loosening around the humeral and glenoid components were also evaluated. RESULTS: Clinical outcomes improved after surgery in both groups (all p < 0.001). The arc of rotation measured by AGA improved postoperatively in both groups (all p < 0.001), and AGA and LO were not different according to the type of glenoid components (all p > 0.05). Overall complication rates including RLLs of PE and MB groups were 43.8% (14/32) and 16.7% (3/18), respectively (p = 0.031). Although the PE group had more RLLs than did the MB group (p < 0.05), related symptoms and/or glenoid implant loosening were not observed in both groups. Subscapularis failure occurred in two patients in the PE group and in one in the MB group. CONCLUSION: The convertible metal-backed glenoid implant with vitamin E1-coated liner may be a good alternative for considering the potential for an easier conversion to reverse total shoulder arthroplasty.

Subacromial notching after reverse total shoulder arthroplasty.

BACKGROUND: Scapular notching is a well-known postoperative complication of reverse total shoulder arthroplasty (RTSA). However, subacromial notching (SaN), a subacromial erosion caused by repeated abduction impingement after RTSA, has not been previously reported in a clinical setting. Therefore, this study aimed to assess the risk factors and functional outcomes of SaN after RTSA. METHODS: We retrospectively reviewed the medical records of 125 patients who underwent RTSA with the same design between March 2014 and May 2017 and had at least 2 years of follow-up. SaN was defined as subacromial erosion observed at the final follow-up but not on the X-ray 3 months after surgery. Radiologic parameters representing the patient's native anatomy and degrees of lateralization and/or distalization during surgery were evaluated using preoperative and 3 months postoperative X-rays. The visual analogue scale of pain, active range of motion, and American Shoulder and Elbow Surgeons score were assessed preoperatively and at the final follow-up to evaluate the functional outcomes of SaN. RESULTS: SaN occurred in 12.8% (16/125) of enrolled patients during the study period. Preoperative center of rotation-acromion distance (P = .009) and postoperative humerus lateralization offset, which evaluated the degree of lateralization after RTSA (P = .003), were risk factors for SaN. The preoperative center of rotation-acromion distance and postoperative humerus lateralization cutoff values were 14.0 mm and 19.0 mm, respectively. The visual analogue scale of pain (P = .01) and American Shoulder and Elbow Surgeons score (P = .04) at the final follow-up were significantly worse in patients with SaN. CONCLUSIONS: SaN might adversely affect postoperative clinical outcomes. As SaN correlated with patients' anatomical characteristics and degree of lateralization during RTSA, the implant's degree of lateralization should be adjusted according to the patient's own anatomical characteristics.

The correlation of the spinoglenoid ganglion cyst size with the electrophysiological alterations of suprascapular nerve and the rotator cuff muscle power.

BACKGROUND: Although various treatment options are available for spinoglenoid cyst, including conservative and surgical methods, there is no standard guideline for its surgical decompression. Thus, the purpose of the study was to correlate the size of the spinoglenoid notch ganglion cyst (GC) as revealed by magnetic resonance imaging (MRI) with electrophysiological alterations, muscle power, and pain severity, and to estimate a cut-off value of cyst size to perform a decompression. METHODS: Between January 2010 and January 2018, the patients with a GC at the spinoglenoid notch diagnosed on MRI, and who had a minimum follow-up of 2 years after the decompression were included. Maximum cyst diameter as measured on MRI was used for comparison. Electromyography (EMG) and nerve conduction velocity (NCV) studies were performed before the surgery. Peak torque deficit (PTD) percentage compared to opposite shoulder was calculated preoperatively and at 1 year after surgery. Pain severity was estimated using visual analogue scale (VAS) preoperatively. RESULTS: Ten (50%) of 20 patients with GC > 2.2 cm and 1 (5.9%) of 17 patients with GC < 2.2 cm showed EMG/NCV abnormalities (p = 0.019). There was a correlation between the cyst size and the positive EMG/NCV findings (Correlation coefficient (CC) = 0.535, p < 0.001). The preoperative peak torque deficit on the external rotation was correlated with the positive EMG/NCV findings (CC = 0.373, p = 0.021). The PTD was improved significantly at 1 year postoperatively in patients with a GC size >2.2 cm (p = 0.029). The cyst size was not related to the preoperative pain VAS and muscle power. CONCLUSIONS: The spinoglenoid cyst size >2.2 cm, but not pain severity or muscle power, correlates with the positive finding of EMG for compressive suprascapular neuropathy. The GC size >2.2 cm can be a reference to decide the need of decompression surgery. LEVEL OF EVIDENCE: IV, case series.

Retear After Arthroscopic Rotator Cuff Repair Results in Functional Outcome Deterioration Over Time.

PURPOSE: This study aimed to evaluate the effect of retear on long-term functional outcomes and glenohumeral joint osteoarthritis (OA) progression after arthroscopic rotator cuff repair (ASRCR). METHODS: We retrospectively reviewed 201 patients who underwent ASRCR and were followed up for at least 5 years. Rotator cuff tendon structural integrity was evaluated using magnetic resonance imaging and/or ultrasonography. Pain, active range of motion, and the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) were evaluated for functional outcomes. To evaluate deterioration over time, the minimal clinically important difference value of pain and ASES were used. RESULTS: The mean follow-up period was 8.6 ± 2.2 years and overall retear rate was 21.4%. OA progression was strongly associated with retear (odds ratio 5.1, P < .001). Functional outcomes at the 2-year postoperative follow-up significantly improved compared to the preoperative status (all P < .017), regardless of retear. However, the retear group presented worse functional outcomes at the final follow-up (pain: 3.1 ± 2.6; ASES: 72.0 ± 17.4) than at the 2-year postoperative follow-up (pain: 1.2 ± 2.3, P = .014; ASES: 91.1 ± 9.9, P= .015) than the healed tendon group at final follow-up (pain: .6 ± 1.7; P < .001; ASES 95.5 ± 11.8; P < .001). The time for deterioration of pain (healed group vs. retear group: 5.5 ± 0.5 vs. 10.6 ± 0.4 years; P < .001) and ASES (healed group vs. retear group: 7.5 ± 0.5 vs. 12.8 ± 0.2 years; P < .001) decreased in the retear group. CONCLUSIONS: The functional status improved after ASRCR in short- and long-term follow-up, regardless of retear. However, retear was strongly associated with OA progression, and long-term functional outcomes deteriorated over time in retear cases, which was not observed during short-term follow-up. STUDY DESIGN: III, retrospective cohort study.

Allogeneic Dermal Fibroblasts Improve Tendon-to-Bone Healing in a Rabbit Model of Chronic Rotator Cuff Tear Compared With Platelet-Rich Plasma.

PURPOSE: To compare the effects of allogeneic dermal fibroblasts (ADFs) and platelet-rich plasma (PRP) on tendon-to-bone healing in a rabbit model of chronic rotator cuff tear. METHODS: Thirty-two rabbits were divided into 4 groups (8 per group). In 2 groups, the supraspinatus tendon was detached and was left as such for 6 weeks. At 6 weeks after creating the tear model, we performed transosseous repair with 5 × 106 ADFs plus fibrin injection in the left shoulder and PRP plus fibrin in the right shoulder. The relative expression of the COL1, COL3, BMP2, SCX, SOX9, and ACAN genes was assessed at 4 weeks (group A) and 12 weeks (group B) after repair. Histologic and biomechanical evaluations of tendon-to-bone healing at 12 weeks were performed with ADF injection in both shoulders in group C and PRP injection in group D. RESULTS: At 4 weeks, COL1 and BMP2 messenger RNA expression was higher in ADF-injected shoulders (1.6 ± 0.8 and 1.0 ± 0.3, respectively) than in PRP-injected shoulders (1.0 ± 0.3 and 0.6 ± 0.3, respectively) (P = .019 and P = .013, respectively); there were no differences in all genes in ADF- and PRP-injected shoulders at 12 weeks (P > .05). Collagen continuity, orientation, and maturation of the tendon-to-bone interface were better in group C than in group D (P = .024, P = .012, and P = .013, respectively) at 12 weeks, and mean load to failure was 37.4 ± 6.2 N/kg and 24.4 ± 5.2 N/kg in group C and group D, respectively (P = .015). CONCLUSIONS: ADFs caused higher COL1 and BMP2 expression than PRP at 4 weeks and showed better histologic and biomechanical findings at 12 weeks after rotator cuff repair of the rabbit model. ADFs enhanced healing better than PRP in the rabbit model. CLINICAL RELEVANCE: This study could serve as a transitional study to show the effectiveness of ADFs in achieving tendon-to-bone healing after repair of chronic rotator cuff tears in humans.

Clinical outcomes of reverse shoulder arthroplasty and rotator cuff repair in patients with massive rotator cuff tears without osteoarthritis: comparison using propensity score matching.

BACKGROUND: The optimal management for massive rotator cuff tears (MRCTs) without osteoarthritis (OA) remains controversial. The purpose of this study was to evaluate and compare the clinical outcomes of reverse shoulder arthroplasty (RSA) vs. rotator cuff repair (RCR) in patients with MRCTs without OA. METHODS: We conducted a retrospective data analysis of 68 patients treated for MRCTs via RSA and 215 patients treated for MRCTs via arthroscopic RCR between January 2014 and April 2019. Through propensity score matching, patients were matched for sex, age, tear size, and global fatty degeneration index. Thirty-nine patients in each group were included, and all patients had completed minimal 2-year follow-up. Postoperative radiologic evaluations of healing failure were performed. The visual analog scale score for pain, range of motion, and functional outcome measures including the American Shoulder and Elbow Surgeons score, QuickDASH (short version of Disabilities of the Arm, Shoulder and Hand questionnaire) score, Simple Shoulder Test score, and Constant score were assessed and compared between the 2 groups. RESULTS: Healing failure was observed in 10 patients in the RCR group (32.3%). No statistically significant differences in preoperative range of motion and functional scores were found between the RCR and RSA groups. Both groups showed significant pain relief and functional improvement at final follow-up. Patients in the RCR group showed significantly greater forward elevation (156.4° ± 23.8° vs. 139.7° ± 22.4°, P < .001) and internal rotation (thoracic vertebra, T8.2 ± 1.2 vs. T9.7 ± 2.6, P = .001). The average American Shoulder and Elbow Surgeons score was 88.3 ± 12.2 in the RCR group and 81.8 ± 16.1 in the RSA group (P = .045). The QuickDASH score was significantly higher in the RCR group (P = .019). A significantly higher Simple Shoulder Test score (9.7 ± 2.8 vs. 8.1 ± 3.0, P = .01) and a significantly higher Constant score (67.2 ± 6.5 vs. 63.2 ± 7.1, P = .011) were seen in the RCR group. CONCLUSION: Both RSA and RCR are effective and reliable treatment options for MRCTs without OA. However, the RCR group showed better shoulder function improvement than the RSA group. Considering the possible implications of RSA, RCR should be referred to as a first-line treatment option for patients with MRCTs without OA with proper indications.

Risk factors for and prognosis of folded rotator cuff tears: a comparative study using propensity score matching.

BACKGROUND: The prognosis of rotator cuff repair (RCR) may be affected by the shape and quality of the torn rotator cuff tendon. However, only a few studies have reported on folded rotator cuff tears (FCTs). Therefore, this study aimed to evaluate the prognostic factors for FCT and clinical outcomes of FCT repair. METHODS: Through propensity score matching (PSM), 200 (40 patients with FCTs and 160 controls) of 1927 patients who underwent RCR from 2010 to 2016 were included. The variables not used for PSM were compared. The anatomic and functional outcomes were assessed at the final follow-up (32.3 ± 21.2 months), and the related prognostic factors for FCTs were evaluated. RESULTS: The risk factors for FCT were heel-type spur (odds ratio [OR], 11.6; P < .001) and delamination (OR, 2.3; P = .034). Although the functional scores at the final follow-up for both groups improved postoperatively and were not significantly different, the visual analog scale scores for pain (1.9 ± 2.1 vs. 1.2 ± 1.7, P = .034) and American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) scores (83.1 ± 14.3 vs. 88.5 ± 12.2, P = .018) were significantly worse in the FCT group at 6 months postoperation. The retear rate was significantly higher in the FCT group (25.0 vs. 10.0%, P = .018). An FCT was a significant risk factor for retears (OR, 3.0; P = .015); however, a subgroup analysis revealed that the retear rate according to the management strategy for the folded portion (débridement of the folded portion vs. en masse repair including the folded portion) was not significantly different (26.7 vs. 24.0%, P > .99). CONCLUSION: The risk factors for FCTs were heel-type spur and delamination. The retear rate was significantly higher for patients with FCTs. An FCT was indicative of poor quality of the remaining tendon; therefore, FCT may be a prognostic factor for worse functional outcomes during the early postoperative period and poor healing potential.

Significance of the acromiohumeral distance on stress radiography for predicting healing and function after arthroscopic repair of massive rotator cuff tears.

BACKGROUND: A decreased acromiohumeral distance (AHD) is commonly detected in patients with massive rotator cuff tears (mRCTs). Most studies evaluating fixed humeral elevation have used preoperative or postoperative standardized radiography and not stress radiography. This study aimed to evaluate the predictive role of the preoperative AHD measured using stress radiography (AHD_stress) in rotator cuff healing and function after arthroscopic repair of mRCTs. METHODS: The data of 113 patients who underwent arthroscopic repair of mRCTs were analyzed. Postoperative cuff integrity was evaluated using magnetic resonance imaging at 1 year, and shoulder function was evaluated at a mean of 34.9 ± 17.8 months (range, 24-92 months) postoperatively. Forty-seven patients showed healing failure. Propensity score matching (1-1) was performed between the healed group and healing failure group. Thirty-eight patients in each group were matched in the final analysis. The AHD and AHD_stress were defined as the shortest distances from the inferior acromion to the superior humerus on standard anteroposterior radiography and stress radiography (5.4-kg weight applied inferiorly in a neutral position), respectively. The AHD difference (AHD_diff) was defined as the difference between the AHD and AHD_stress values. Receiver operating characteristic curve analysis was performed to determine cutoff values for significant variables. RESULTS: No difference in the mean preoperative AHD was found between the healed group (7.5 ± 2.0 mm) and healing failure group (6.9 ± 2.2 mm, P = .234). The AHD_diff value was significantly higher in the healed group (4.4 ± 2.1 mm) than in the healing failure group (3.0 ± 2.0 mm, P = .002; cutoff, 3.2 mm). Patients with an AHD_diff value ≥ 3.2 mm showed a lower healing failure rate (28.9% vs. 71.1%, P < .001) and higher functional scores than patients with an AHD_diff value < 3.2 mm. The AHD_diff value was higher in patients with an American Shoulder and Elbow Surgeons (ASES) score ≥ 80 (4.9 ± 1.9 mm) than in those with an ASES score < 80 (3.1 ± 2.1 mm, P = .024). Among patients with healing failure, only the postoperative AHD showed a significant difference between those with an ASES score ≥ 80 (7.0 ± 2.5 mm) and those with an ASES score < 80 (4.8 ± 2.1 mm, P = .009; cutoff, 4.8 mm). CONCLUSION: A reducible AHD, which increased by ≥ 3.2 mm under stress radiography, can be a favorable predictor of rotator cuff healing and function after arthroscopic repair of mRCTs. Our findings suggest that this new and simple radiologic parameter should be considered preoperatively and would be helpful to determine appropriate treatment strategies.

Optimal insertion site of glenoid baseplate in reverse total shoulder arthroplasty: anatomical simulation using three dimensional image processing software.

PURPOSE: Conventionally, the central structure of the baseplate is inserted through the point where the vertical and horizontal axes of the glenoid intersect (conventional insertion site (CIS)). However, there is scanty theoretical evidence that CIS has the optimal bone stock. We evaluated the optimal insertion site for the glenoid baseplate through the three-dimensional volumetric measurement of the glenoid bone stock. METHODS: Pre-operative computed tomography (CT) images of 30 consecutive reverse total shoulder arthroplasty procedures were analyzed. Three-dimensional image processing software was used to reconstruct CT and volumetrically measure the glenoid bone stock according to the simulated central peg. A simulated central peg was inserted to the medial pole of the scapula from 49 points determined along with the intersect point of the vertical and horizontal axes of the glenoid CIS at 2-mm intervals. The overlapped volume between the simulated central peg and glenoid vault, representing the amount of glenoid bone stock along the passage of the central peg, was then automatically calculated. RESULTS: The depth of the glenoid vault was 25.5 ± 3.0 mm (range, 19.3-31.5), and the mean overlapped volume between the simulated central peg and the glenoid vault was 623.0 ± 185.8 ml. The optimal insertion site for the bony purchase of the central peg was 2 mm inferior and posterior from the CIS (765.3 ± 157.5). CONCLUSION: The optimal insertion site of the baseplate is located slightly inferiorly and posteriorly to the CIS. This anatomical information may be used as a reference to determine the optimal insertion site of the baseplate according to an implant of a surgeon's choice.

New quantified measurement of fatty infiltration of the rotator cuff muscles using magnetic resonance imaging.

BACKGROUND: The degree of fatty infiltration of the rotator cuff muscle is typically evaluated using the Goutallier-Fuchs grading system, but its consistency remains controversial. This study aimed to evaluate a new quantified measurement of fatty infiltration based on three-dimensionally reconstructed volumetric data obtained from magnetic resonance images of non-pathologic shoulders using open-source software. METHODS: Fourteen shoulder 3-T magnetic resonance images (8 men, 6 women) without lesions obtained between 2010 and 2017 were analysed. Slicer version 4.6.2 was used to semi-automatically reconstruct the three-dimensional volumetric data from T2 sagittal oblique images and to differentiate fat tissue from rotator cuff muscle using the difference in signal intensity. RESULTS: The cutoff value for dividing muscle and fat was 508.9. The inter-class and intra-class correlations of each rotator cuff muscle and fat tissue were >0.9 (all P < 0.001). The mean muscle volume of the supraspinatus, infraspinatus, teres minor, and subscapularis were 15.2, 20.9, 13.3, and 29.7 mL, respectively. The muscle volume of the men was greater than that of the women (all P < 0.001), and the fat infiltration ratio was positively correlated with body mass index (all P < 0.05). CONCLUSIONS: The semi-automated quantified measurement of fatty infiltration of the rotator cuff muscles using magnetic resonance imaging and Slicer software presented excellent consistency. This technique could be an alternative measurement to complement the weak consistency of the Goutallier-Fuchs grading system. However, to reduce the error of measurement, this study evaluated non-pathologic shoulders. Therefore, further study using magnetic resonance imaging of pathologic shoulders is necessary for actual clinical application. LEVEL OF EVIDENCE: Level IV, case series, diagnostic study.

Effect of Recombinant Human Parathyroid Hormone on Rotator Cuff Healing After Arthroscopic Repair.

PURPOSE: To assess the effect of teriparatide, a recombinant human parathyroid hormone, on rotator cuff healing after arthroscopic repair compared with patients who were not treated with teriparatide. METHODS: This was a prospective propensity-matched study. Thirty-one patients who underwent arthroscopic rotator cuff repair for tears >2 cm in size between January 2015 and June 2016 were recruited (group I). Daily subcutaneous injections of teriparatide 20 µg were administered for 3 months following surgery. In the same period, propensity score matching (1-to-4) was performed to generate an untreated control group undergoing rotator cuff repair alone (group II) with the same tear size. Magnetic resonance imaging evaluation of tendon healing was performed at least 1 year postoperatively, as well as the range of shoulder motion, American Shoulder and Elbow Surgeons score, Constant score, and simple shoulder test. RESULTS: There was no significant difference of the retraction size, the anterior to posterior dimension of torn rotator cuff, or the preoperative bone mineral density in groups I and II (P = .78, .87, and .96, respectively). The rate of retear was significantly lower in group I than in group II (16% vs 33.9%; P = .04). Range of motion and functional scores were not significantly different between the 2 groups (P > .05). CONCLUSIONS: Teriparatide, a recombinant human parathyroid hormone, can be a systemic treatment option that significantly enhances the tendon-to-bone healing after arthroscopic rotator cuff repair for patients with rotator cuff tears >2 cm. LEVEL OF EVIDENCE: Level III, case-control study.

Hemodynamic change and affecting factors after shoulder arthroplasty in the Asian population.

BACKGROUND: This retrospective study was designed to compare the hemodynamics among the types of shoulder arthroplasty and to evaluate predictors of transfusion in the Asian population. METHODS: A total of 212 shoulder arthroplasties (26 fracture hemiarthroplasty (fHA), 49 anatomical total shoulder arthroplasty (aTSA), 132 reverse total shoulder arthroplasty (rTSA), and 5 revision surgery) from August 2004 to January 2016 were retrospectively reviewed. Demographics, surgical factors, and perioperative hemodynamic factors among the types of arthroplasty were compared. Multivariate analysis was conducted to determine predictors of transfusion. RESULTS: Preoperative hemoglobin and hematocrit levels were lower in the fracture hemiarthroplasty group (p < 0.001, 0.001). The overall transfusion rate of shoulder arthroplasties in Asian population was 11.3%, and transfusion rate was significantly different among the types of arthroplasty (fHA 30.8%, aTSA 10.2%, rTSA 7.6%, revision 20.0%; p = 0.010). The predictors of transfusion were preoperative hemoglobin levels <12.15 g/dL (OR = 7.404, 95% C.I. 2.420-22.653, p < 0.001) and <10.0 g/dL at postoperative day 1 (OR = 5.499, 95% C.I. 1.929-15.671, p = 0.001). CONCLUSION: The best predictors of transfusion were hemoglobin levels of perioperative periods, furthermore, total amount of drainage could not represent the quantity of perioperative hemorrhage. Therefore, careful monitoring of hemoglobin level is more crucial than monitoring the amount of drainage. Hemodynamics according to the type of arthroplasty should be considered in shoulder arthroplasty. LEVEL OF EVIDENCE: Level IV, retrospective case series.

The Clinical Outcomes and Their Associated Factors in Staged Bilateral Arthroscopic Rotator Cuff Repair.

PURPOSE: To compare perioperative characteristics and postoperative outcomes of both shoulders in patients who underwent arthroscopic bilateral rotator cuff repair sequentially and to assess the associated factors that would affect the anatomic healing in staged bilateral rotator cuff repair. METHODS: The study enrolled 64 patients who underwent bilateral rotator cuff repair with follow-up imaging at least 12 months postoperatively. We allocated the shoulders operated on first to the surgery I group and those operated on second to the surgery II group. Visual analog scale (VAS) pain and satisfaction scores, range of motion, the American Shoulder and Elbow Surgeons score, the Simple Shoulder Test score, and healing failure were evaluated. RESULTS: Range of motion improved with no significant between-group differences (all P > .05). In the surgery II group, VAS pain and VAS satisfaction scores were significantly worse at 6 months postoperatively (P = .048 and P = .041, respectively) but were comparable at final follow-up (P = .598 and P = .065, respectively). American Shoulder and Elbow Surgeons and Simple Shoulder Test scores at 6 months were worse in the surgery II group (P = .038 and P = .048, respectively) but similar at final follow-up (P = .786 and P = .087, respectively). Tear size was similar between the 2 surgical procedures (κ = 0.537, P < .001). Of the 11 patients with nonhealing in the surgery I group, 7 (63.6%) had subsequent failure in the other shoulder, and if one shoulder had healing failure, the other shoulder had a high possibility of healing failure as well (κ = 0.373, P = .004). CONCLUSIONS: Bilateral arthroscopic rotator cuff repair showed good outcomes at final follow-up on both sides. Tear size was closely related in both shoulders, and healing failure after the first rotator cuff repair was an associated factor with healing failure after the second operation. LEVEL OF EVIDENCE: Level IV, case series.

Pullout Strength of All-Suture Anchors: Effect of the Insertion and Traction Angle-A Biomechanical Study.

PURPOSE: To evaluate the pullout strength of the all-suture anchor (ASA), based on the angles of anchor insertion and traction. METHODS: Synthetic saw bones of 2 densities (0.16 and 0.32 g/cm3) with 3 mm thick cortical bone models were used. ASAs were inserted at 45°, 60°, 75°, or 90° and pulled at 2 angles from the surface: 45° (simulating the physiological pull of the supraspinatus) and 90° (simulating pulling out during knot tying). Five consecutive pullout tests for each insertion and traction angle combination per saw bone were conducted to evaluate the ultimate load to failure and mode of failure (80 tests total). Thereafter, 9 matched pairs of human cadaveric humeri with 2 ASA types were used (insertion angles, 45°, 75°, 90°; traction angle, 90°). Nine consecutive tests were conducted for each insertion angle and anchor type (54 tests total). RESULTS: The pullout strength was significantly higher for high density- than for low-density saw bones (all P < .05). The pullout strength was higher at the 45°than at the 90° traction angle (all P < .05) and was significantly higher at the 90° and 75° than at the 45° insertion angle in both high-density saw bones and cadaveric humeri (all P < .05). However, the pullout strength was not significantly different by ASA type (all P > .05). CONCLUSIONS: ASA showed stronger pullout strength in higher density bones. Furthermore, it presented stronger pullout strength in the physiological traction direction of supraspinatus rather than in the knot-tying direction, consistent with the deadman theory. However, stronger pullout strength was observed in the vertically directed insertion angle, not 45°. Therefore, implanting the ASA vertically may be clinically more beneficial not only when performing knot tying during surgery, but also when the supraspinatus tendon loads the ASA postoperatively. CLINICAL RELEVANCE: The study provides biomechanical evidence that the optimal insertion angle for an ASA is more vertical than the 45°.

Rapid Progressive Osteonecrosis of the Humeral Head After Arthroscopic Rotator Cuff Surgery.

PURPOSE: To verify the clinical features and the risk factors of rapid progressive osteonecrosis of the humeral head after arthroscopic rotator cuff surgery (ARCS). METHODS: Data and medical records of 24 patients who had rapid progressive collapse of the humeral head after ARCS performed from October 2012 to March 2016 were retrospectively analyzed. Among them, 8 patients demonstrated no evidence of osteonecrosis of the humeral head preoperatively yet developed rapid progressive collapse of the humeral head within 12 months after ARCS. RESULTS: All patients were women with a mean age of 64.0 years (range, 52-74 years), and all of them had surgery on their dominant side. Sudden pain developed at a mean 4 months (range, 0-6 months) after index surgery. The rapid progressive collapse of the humeral head occurred within 12 months after index surgery. No clear risk factor or evidence supporting an association between ARCS and humeral head osteonecrosis was found. CONCLUSIONS: Although the cause of the rapid progressive humeral head osteonecrosis after ARCS still needs to be established, surgeons should be aware of the possible development of humeral head osteonecrosis after ARCS, especially in older women with dominant arm involvement. LEVEL OF EVIDENCE: Level IV, prognostic case series.

Relationship Between Coronal Alignment and Rotational Profile of Lower Extremity in Patients With Knee Osteoarthritis.

BACKGROUND: We aimed at determining whether the coronal alignment of lower extremity was related to rotational geometry of distal femur, femoral anteversion, and tibial torsion in patients with knee osteoarthritis. METHODS: A total of 422 lower extremities were divided into 3 groups according to the coronal alignment: valgus (n = 31), neutral (n = 78), and varus group (n = 313). Condylar twisting angle was measured to determine rotational geometry of distal femur as the angle between the clinical transepicondylar axis and the posterior condylar line. Femoral anteversion was assessed using the angle between a line intersecting the femoral neck and the posterior condylar line (pFeAV) and the angle between the same line and transepicondylar axis that is not affected by posterior condylar variations (tFeAV). Tibial torsion was evaluated by measuring the angle between the posterior condyles of the proximal tibia and the transmalleolar axis. RESULTS: As the coronal alignment changed from varus to valgus, the condylar twisting angle increased (r = 0.253, P < .001; 6.6° in varus, 7.4° in neutral, and 10.2° in valgus group). Although the pFeAV also increased (r = 0.145, P = .003), the tFeAV did not change significantly (P = .218). Mean tFeAV was 4.3° in varus, 4.7° in neutral, and 6.5° in valgus group. In contrast, as the coronal alignment changed from varus to valgus, the external tibial torsion increased (r = 0.374, P < .001; 22.6° in varus, 26.3° in neutral, and 32.6° in valgus group). CONCLUSION: The change patterns of the rotational profiles of the lower extremity according to the coronal alignment should be considered in order to obtain satisfactory rotational alignment after TKA.

The application of a dual-lead locking screw could enhance the reduction and fixation stability of the proximal humerus fractures: a biomechanical evaluation.

Introduction: Bicortical screw fixation, which penetrates and fixes the near and far cortex of bone, has been conventionally used to achieve compressive fixation for fracture using screws. Open reduction and internal fixation using the locking plate are widely used for treating proximal humerus fractures. However, minimal contact between the bone and the locking plate can lead to an insufficient reduction. Theoretically, a dual-lead locking screw with different leads for the screw head and body could enhance the reduction and fixation stability of fragments in proximal humeral fractures without bicortical fixation, and achieve additional compression at the bone-plate-screw interface. This study assessed the insertion mechanics of the lead ratio of the dual-lead locking screw and its effect on the fixation stability of the proximal humerus fracture. Methods: A Multi-Fix® locking plating system composed of ∅ 3.5 mm locking screws and a locking plate was used to make a locked plating for Sawbone bone blocks and fourth-generation composite humeri. Two different types of Sawbone bone blocks were used to simulate the osteoporotic (10 PCF) and normal cancellous (20 PCF) bones. The lead of the screw head thread (Lhead) was 0.8 mm, and that of the screw body (Lbody) was 0.8, 1.25, 1.6, 2.0, and 2.4 mm, whose lead ratios (Rlead=Lbody/Lhead) were 1.0, 1.56, 2.0, 2.5, and 3.0, respectively. Results: The dual-lead locking screw elevated the compression between the locking plate and the bone. The elevation in the compression due to the dual-lead thread became weaker for the cancellous bone when the lead of the screw body was more than twice that of the screw head. The plate/humerus compression with strong bone quality withstood higher dual-lead-driven compression. Discussion: A dual-lead locking screw of Lbody=1.25mm (Rlead=1.56) is recommended for maximum rotational stability for the locked humerus plating. The screws with over Lbody=1.6mm (Rlead=2) have no advantage in terms of the failure torque and maximum torsional deformation. Any locking dual-lead screw with a body thread lead of <1.6 mm (Rlead=2) can be used without the risk of bone crush when surgeons require additional compression to the locked cancellous bone plating.