Resonantly enhanced terahertz four-wave mixing in fluorides.

Converting a THz signal into the optical domain is of great interest for THz sensing and spectroscopy. Here intense broadband THz pulses with a central frequency of ΩTHz are mixed with an optical pump at ωp, and a signal is observed at a wavelength of ωs = 2(ωp - Δωp) - ΩTHz with the detuning ωp - Δωp being due to pump pulse spectral broadening. The observed THz-four-wave mixing (FWM) signal close to 400 nm is shown to result from a resonantly amplified four-wave mixing in CaF2, BaF2, and MgF2.

MXene-based electrochemical devices applied for healthcare applications.

The initial part of the review provides an extensive overview about MXenes as novel and exciting 2D nanomaterials describing their basic physico-chemical features, methods of their synthesis, and possible interfacial modifications and techniques, which could be applied to the characterization of MXenes. Unique physico-chemical parameters of MXenes make them attractive for many practical applications, which are shortly discussed. Use of MXenes for healthcare applications is a hot scientific discipline which is discussed in detail. The article focuses on determination of low molecular weight analytes (metabolites), high molecular weight analytes (DNA/RNA and proteins), or even cells, exosomes, and viruses detected using electrochemical sensors and biosensors. Separate chapters are provided to show the potential of MXene-based devices for determination of cancer biomarkers and as wearable sensors and biosensors for monitoring of a wide range of human activities.

Two-color symmetry breaking in laser-based secondary neutral mass spectrometry.

RATIONALE: An alternative method of analysis for laser-based secondary neutral mass spectrometry is introduced. METHODS: By mixing a fundamental 1240 nm wavelength of the near-infrared laser field with an intensity of 1 × 1015 W/cm2 with its second harmonic generation wavelength of 620 nm, control is attained over the ion yield in secondary neutral mass spectrometry for a native silver surface and a surface covered with silver nanoparticles. RESULTS: The ion yields of selected species in the mass spectra, such as a C2 H4 O2 surfactant fragment ion and the Ag ion, are enhanced or suppressed by a factor of 8 or 23, respectively, in comparison with single color post-ionization. In addition, a significant suppression of ion fragmentation is demonstrated for both the silver sample and silver nanoparticles. Periodic variation of the ion yield with a modulation depth of 4% is observed depending upon the relative phase between the fundamental and second harmonic generated fields. These variations are explained in terms of tunneling ionization with symmetry-broken fields. CONCLUSIONS: An additional degree of freedom in a form of additional second color is introduced in laser-based secondary neutral mass spectrometry. Ion yield control is extended in a form of symmetry-broken fields.

Remarkable differences in the voltammetric response towards hydrogen peroxide, oxygen and Ru(NH3)63+ of electrode interfaces modified with HF or LiF-HCl etched Ti3C2Tx MXene.

An electrochemical study was performed on the behavior of Ti3C2Tx MXenes prepared by using either HF (MXene1) or LiF/HCl as etchants (MXene2). The use of two redox probes indicates the presence of a higher negative charge density on MXene2 in comparison to MXene1. The characterization of two nanomaterials shows that titanium and fluoride are present higher by one order of magnitude at the interface of MXene2, compared to MXene1. The high Ti and F content is accompanied by a 82-fold larger (249 µA·cm-2 vs. 5.64 µA·cm-2) anodic peak at the peak potential near 0.4 V (vs. Ag/AgCl). Similarly, the peak current on MXene2 is 317-fold higher for the oxygen reduction at pH 7.0 (at a voltage of -0.84 V) and 215-fold higher for the reduction of H2O2 at -0.89 V, when compared to MXene1. Graphical abstractDifference in electrochemical behavior of MXene prepared by HF (MXene1) and LiF/HCl (MXene2) as etchants.

A Graphene-Based Glycan Biosensor for Electrochemical Label-Free Detection of a Tumor-Associated Antibody.

The study describes development of a glycan biosensor for detection of a tumor-associated antibody. The glycan biosensor is built on an electrochemically activated/oxidized graphene screen-printed electrode (GSPE). Oxygen functionalities were subsequently applied for covalent immobilization of human serum albumin (HSA) as a natural nanoscaffold for covalent immobilization of Thomsen-nouvelle (Tn) antigen (GalNAc-O-Ser/Thr) to be fully available for affinity interaction with its analyte-a tumor-associated antibody. The step by step building process of glycan biosensor development was comprehensively characterized using a battery of techniques (scanning electron microscopy, atomic force microscopy, contact angle measurements, secondary ion mass spectrometry, surface plasmon resonance, Raman and energy-dispersive X-ray spectroscopy). Results suggest that electrochemical oxidation of graphene SPE preferentially oxidizes only the surface of graphene flakes within the graphene SPE. Optimization studies revealed the following optimal parameters: activation potential of +1.5 V vs. Ag/AgCl/3 M KCl, activation time of 60 s and concentration of HSA of 0.1 g L-1. Finally, the glycan biosensor was built up able to selectively and sensitively detect its analyte down to low aM concentration. The binding preference of the glycan biosensor was in an agreement with independent surface plasmon resonance analysis.

Rat liver intoxication with CCl4: biochemistry, histology, and mass spectrometry.

This work provides complex characterisation of cirrhotic rat liver tissue induced by carbon tetrachloride using biochemical and histopathological analyses, and also presents a novel approach, secondary ion mass spectrometry (SIMS). According to our knowledge, this is the first report that compares these three different approaches in study of liver damage. We observed increased levels of triacylglycerols and total cholesterol in the liver and decreased levels of those parameters in the plasma. Histopathological observations include fat accumulation in the cells and changes in internal configuration of cells such as shift of position of organelles from the centre to the edge. The damage to the rat tissue is additionally determined by SIMS analysis, which characterizes, among other substances, diacylglycerols, cholesterol and fatty acids, such as linoleic and oleic acids. Interestingly, unlike other observed particles, a marked difference in SIMS intensity for diacylglycerol C37H69O4 positive fragment at 575.5 m/u was observed. In fact, there was one order of magnitude difference between intoxicated liver samples and controls and this molecular signal seems to be a potential chemical indicator of the damage. The SIMS images are consistent with histopathological results and they additionally provide information about distribution of chemical compound which is a new potential tool for the liver disease characterisation on molecular level.

Electrochemical performance of Ti3C2Tx MXene in aqueous media: towards ultrasensitive H2O2 sensing.

An extensive characterization of pristine and oxidized Ti3C2Tx (T: =O, -OH, -F) MXene showed that exposure of MXene to an anodic potential in the aqueous solution oxidizes the nanomaterial forming TiO2 layer or TiO2 domains with subsequent TiO2 dissolution by F- ions, making the resulting nanomaterial less electrochemically active compared to the pristine Ti3C2Tx. The Ti3C2Tx could be thus applied for electrochemical reactions in a cathodic potential window i.e. for ultrasensitive detection of H2O2 down to nM level with a response time of approx. 10 s. The manuscript also shows electrochemical behavior of Ti3C2Tx modified electrode towards oxidation of NADH and towards oxygen reduction reactions.

Surface Nanostructures Composed of Thiolated Cyclodextrin/Au and Fe Species: Gas- and Liquid-Phase Preparation.

Supramolecular surface nanostructures have application potential as functional devices. The complex combination of thiolated cyclodextrin, chemisorbed on an Au surface (Au-S-CD), with deposited Fe species is studied by secondary ion mass spectrometry. The Fe species are prepared by pulsed laser ablation in water and thermal effusion in vacuum. Using laser ablation in water, the solution of Fe species is dropped on Au-S-CD, where mass peaks at 1227 m/z, 1243 m/z, and 1260 m/z are observed and assigned to C42 H68 O34 SNa-Fe(+) , C42 H68 O34 SK-Fe(+) together with C42 H68 O34 SNa-FeO(+) , and C42 H68 O34 SK-FeO(+) , respectively. On the other hand, laser ablation directly linked to the Au-S-CD surface results in desorption of CD-S. Thermal effusion, even with a cooled surface, was negative with respect to the complex observation. Laser ablation results in the formation of a supramolecular host-guest complex of the form Au-S-CD-Fe, and in the formation of an adduct of the form Au-S-CD-FeO.

Preparation of Cyclodextrin-Iron Species in Water by Laser Ablation: Secondary Ion Mass Spectrometry.

Supramolecular complexes between cyclodextrin and iron species are studied by using secondary ion mass spectrometry. The iron species are prepared by pulsed-laser ablation of bulk iron in water; this gives Fe(+) (56 m/z) and Fex Oy (+) (x, y=1-7) species. Cyclodextrin is added to the water either before or after the laser ablation. When it is added before laser ablation, molecular fragments of cyclodextrin are detected as dehydrated glucopyranose units (C6 H8 O4 (+) ) associated with Fe(+) , FeO(+) , and Fe2 O(+) species. The focus is to observe supramolecular host-guest complexes or adducts between intact molecules of cyclodextrin and iron species. When cyclodextrin is added after laser ablation, the relevant peak at 1210 m/z is observed and assigned as C42 H67 O35 FeNa(+) , which corresponds to a cyclodextrin molecule minus three H atoms. Two possible explanations of this finding are the presence of the host-guest C42 H67 O35 Na-Fe complex, in which Fe is in the cavity, or the presence of the adduct C42 H67 O34 Na-FeO with FeO on the outer surface; the formation of these complexes are supported by the hydrophobicity of Fe and hydrophilicity of FeO, respectively. Due to the presence of 12 % of intact C42 H70 O35 Na-Fe complex and an estimated Fe/FeO ratio of approximately 10(2) , host-guest formation is assumed to be more significant.

Fluorescence Dynamics of Monocyclodextrin- and Bis(thiol-cyclodextrin)-Coumarin C153 Complexes.

The solvation and confinement of coumarin C153 within supramolecular host/guest complexes based on ß-cyclodextrin (ß-CD) and 6-deoxy-6-thio-ß-cyclodextrin (ß-CD-SH) in water are studied by fluorescence spectroscopy. For ß-CD/C153, the 1:1 complex is proposed, and for ß-CD-SH/C153 both the 1:1 and 2:1 complexes are believed to be formed. The 2:1 ß-CD-SH/C153 complex has an association constant of 4.2×10(5) M(-1) and a C153 population of 82 %, which are interestingly high values, indicating that the proposed ß-CD-SH dimers structure are connected by covalent disulfide bonds; this is supported by mass spectrometry. Solvation related to fast hydrogen-bond rearrangement as a part of fluorescence relaxation is determined by the ultrafast components of time-resolved spectroscopy to be 3 and 7 ps for the 1:1 ß-CD/C153 and 2:1 ß-CD-SH/C153 complexes, respectively.