RESUMO
The conformation of molecules and materials is crucial in determining their properties and applications. Here, this work explores the reversible transformation between two distinct conformational isomers in metal nanoclusters. This work demonstrates the successful manipulation of a controllable and reversible isomerization of Au18SR14 within an aqueous solution through two distinct methods: ethanol addition and pH adjustment. The initial driver is the alteration of the solution environment, leading to the aggregation of Au18SR14 protected by ligands with smaller steric hindrance. At the atomic level, the folding mode of the unique Au4SR5 staple underpins the observed structural transformation. The reversal of staple conformation leads to color shifting between green and orange-red, and tailors a second emission peak at 725 nm originating from charge transfer from the thiolate to the Au9 core. This work not only deepens the understanding of the surface structure and dual-emission of metal nanoparticles, but also enhances the comprehension of their isomerization.
RESUMO
Lutein is a carotenoid with several beneficial functions, but its poor water solubility, chemical instability, and low bioavailability limits its application. To overcome these shortcomings, self-assembly composite nanoparticles from Stauntonia brachyanthera seed albumin (SBSA), gum Arabic (GA), and carboxymethylcellulose (CMC) were developed for lutein encapsulation. Firstly, SBSA was extracted from seeds and its physicochemical properties were evaluated. Followingly, the nanoparticles were prepared with SBSA through a heat induced self-assembly method which were modified by GA and CMC. The nanoparticles exhibited good storage, pH, and salt stability. Hydrogen bonds, hydrophobic interactions, and electrostatic interactions were proved to derive the formation of nanoparticles. The maximum effective loading capacity (LC) of the lutein in nanoparticles was 0.92 ± 0.01% with an encapsulation efficiency (EE) at 83.95 ± 0.98%. Heat stability and storage stability of lutein were significantly enhanced after encapsulation into nanoparticles. In addition, the bioaccessibility of lutein increased from 17.50 ± 2.60% to 46.80 ± 4.70% after encapsulation into nanoparticles.
Assuntos
Goma Arábica , Nanopartículas , Albuminas , Carboximetilcelulose Sódica , Luteína , Tamanho da PartículaRESUMO
The seed of Stauntonia brachyanthera is usually regarded as waste after fructus processing. Here, the potential utilization value of the protein isolate (SSPI) from seeds was evaluated by investigating its physicochemical and functional properties. SSPI was a complex protein containing 7 distinct subunits that had high contents of most essential amino acids. The maximum foaming capacity of SSPI was 406.7 ± 41% at pH 9.0, and the water holding/oil adsorption capacities were 4.66 g/g and 9.06 g/g, respectively. SSPI aggregates with a particle size of 154.1 ± 5.2 nm was prepared after heat treatment, which was performed as a Pickering-like stabilizer for the structuring of water-in-oil-in-water emulsions. The outer droplet size of emulsions decreased as the aggregate concentration increased. Emulsion gels could be observed with the increasing aggregate concentration and oil fraction. Further study found that the stabilities of inner water-in-oil droplets and creaming were progressively increased by increasing the aggregate concentration during storage.
Assuntos
Emulsificantes/química , Emulsificantes/isolamento & purificação , Temperatura Alta , Proteínas de Plantas/química , Proteínas de Plantas/isolamento & purificação , Ranunculales/química , Sementes/química , Adsorção , Tamanho da Partícula , Água/químicaRESUMO
The fruit of Akebia trifoliata var. australis can be consumed as food. However, the peel of this fruit is typically regarded as waste. The application of such waste can create opportunities to produce new and valuable by-products. Herein, we have shown that citric acid extracted pectin (CEP) from Akebia trifoliata var. australis peel has good water solubility and high galacturonic units, which helps reduce AgNO3 into Ag nanoparticles (CEP-AgNPs) through a one-step, eco-friendly process. The resulting CEP-AgNPs showed sustained release of Ag+ and remarkable antibacterial activity. Subsequently, the CEP-AgNPs were processed into a CEP-Ag sponge with excellent water absorption and prolonged water retention properties. The CEP-Ag sponge could support the cell adhesion and proliferation. Most importantly, the sponge effectively facilitated a moist environment with bacterial disinfection capability which accelerated the healing of infected wounds. Thus, CEP-Ag sponge, a sustainable and high value by-product, was obtained from food waste.
Assuntos
Antibacterianos/uso terapêutico , Bandagens , Nanopartículas Metálicas/uso terapêutico , Pectinas/química , Resíduos Sólidos , Cicatrização/efeitos dos fármacos , Animais , Antibacterianos/química , Antibacterianos/farmacologia , Antibacterianos/toxicidade , Permeabilidade da Membrana Celular/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Feminino , Fibroblastos/efeitos dos fármacos , Frutas/química , Química Verde/métodos , Humanos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/toxicidade , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Testes de Sensibilidade Microbiana , Pectinas/isolamento & purificação , Pectinas/toxicidade , Ranunculales/química , Ratos Sprague-Dawley , Prata/química , Prata/uso terapêutico , Prata/toxicidade , Nitrato de Prata/química , Pele/patologia , Solubilidade , Água/química , MolhabilidadeRESUMO
The pectin (CEP) was used as matrix material to prepare Ag@AgCl/ZnO nanocomposites with a green method for photocatalytic antibacterial activity in visible-light. Briefly, Ag@AgCl plasmonic hybrids were prepared in the CEP macromolecule matrix with size control, which was attributed to the stability of carboxyl and hydroxyl groups on the CEP. Subsequently, an effective and green two-steps approach was explored for the fabrication of CEP-Ag@AgCl/ZnO nanocomposites with resource saving and environment friendly. Interestingly, more Ag+ was converted into metallic Ag in the CEP-Ag@AgCl/ZnO than that in the CEP-Ag@AgCl. This phenomenon was attributed that the reducibility of free hemiacetal hydroxyl groups on CEP was realized with the help of NaOH in the preparation of CEP-ZnO. In addition, the CEP chains were not obviously destroyed except for the change in the crystallinity after the preparation of the CEP-Ag@AgCl/ZnO nanocomposites, indicating that the method was non-destructive. Moreover, the pH triggered release of Zn2+ and low release of Ag+ in CEP-Ag@AgCl/ZnO nanocomposites with excellent photocatalytic antibacterial activity were confirmed in this work. The proposed green process provides a new idea for the large-scale production of antibacterial pectin-based nanocomposites in industry with a low-cost.
Assuntos
Antibacterianos/química , Antibacterianos/farmacologia , Luz , Nanocompostos/química , Pectinas/química , Compostos de Prata/química , Prata/química , Óxido de Zinco/química , Catálise , Nanopartículas Metálicas/química , Modelos Químicos , Processos Fotoquímicos , Análise Espectral , Relação Estrutura-AtividadeRESUMO
In this study, a novel antibacterial agent was developed based on chitin nanofibrous microspheres loaded with AgNPs and Fe3O4 nanoparticles (Ag-Fe3O4-NMs) for synergistic antibacterial activity and wound healing. Ag-Fe3O4-NMs was prepared via an in situ synthetic method which showed an excellent porosity and wettability. Moreover, Ag-Fe3O4-NMs were capable of sustained release of Ag+ and catalysed the decomposition of low H2O2 concentrations to generate hydroxyl radical (OH). The OH and Ag+ showed higher antibacterial activity and inhibited the toxicity with high dose of AgNPs and H2O2. In vitro biocompatibility results suggested that Ag-Fe3O4-NMs have low toxicity and low hemolysis. Thus, a novel antibacterial agent with enhanced synergistic antibacterial activity was obtained by combination of Ag-Fe3O4-NMs and H2O2 at a low and biologlically safe dosage, which could facilitate fibroblast growth, accelerate epithelialization, and promote the healing rate of infected wounds.
Assuntos
Antibacterianos/administração & dosagem , Quitina/administração & dosagem , Óxido Ferroso-Férrico/administração & dosagem , Peróxido de Hidrogênio/administração & dosagem , Nanopartículas/administração & dosagem , Prata/administração & dosagem , Animais , Linhagem Celular , Sinergismo Farmacológico , Eritrócitos/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Feminino , Fibroblastos/efeitos dos fármacos , Humanos , Peroxidases/administração & dosagem , Coelhos , Ratos Sprague-Dawley , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/crescimento & desenvolvimento , Cicatrização/efeitos dos fármacosRESUMO
The ability of mannose receptor (MR) to recognize the carbohydrate structures is well-established. Here, we reported that MR was crucial for the immune response to a Ganoderma atrum polysaccharide (PSG-1), as evidenced by elevation of MR in association with increase of phagocytosis and concentrations of interleukin-1ß (IL-1ß) and tumor necrosis factor-α (TNF-α) in normal macrophages. Elevation of MR triggered by PSG-1 also led to control lipopolysaccharide (LPS)-triggered inflammatory response via the increase of interleukin-10 (IL-10) and inhibition of phagocytosis and IL-1ß. Anti-MR antibody partly attenuated PSG-1-mediated anti-inflammatory responses, while it could not affect TNF-α secretion, suggesting that another receptor was involved in PSG-1-triggered immunomodulatory effects. MR and toll-like receptor (TLR)4 coordinated the influences on the TLR4-mediated signaling cascade by the nuclear factor-κB (NF-κB) pathway in LPS-stimulated macrophages subjected to PSG-1. Collectively, immune response to PSG-1 required recognition by MR in macrophages. The NF-κB pathway served as a central role for the coordination of MR and TLR4 to elicit immune response to PSG-1.