Efficient and Modular Biofunctionalization of Thiophene-Based Conjugated Polymers through Embedded Latent Disulfide.

Biofunctionalized conjugated polymers (i.e., carrying enzymes, antibodies, and nucleic acids) are of great interest for many biological applications, yet efficient biofunctionalization of conjugated polymers under biocompatible conditions is challenging. We report a facile strategy to make biofunctionalized conjugated polymers through thiol-ene chemistry with embedded latent disulfide functional groups. This is made possible through the design of a cyclic disulfide-containing dioxythiophene, which can be integrated into a series of conjugated polymers via acid-catalyzed chain-growth polymerization. The utility of such a biofunctionalized polymer with glucose oxidase has been examined in organic electrochemical transistors for the selective sensing of glucose. This work provides a venue for the creation of biofunctional organic semiconductors.

Gas-Phase Reactivity of Phenylcarbyne Anions.

Gas-phase reactivities of the phenylcarbyne anion and its four derivatives were studied using a linear quadrupole ion trap mass spectrometer. The phenylcarbyne anions were calculated to have a triplet ground state (singlet-triplet splittings of 4-9 kcal mol-1), with the exception of the 4-cyanophenylcarbyne anion that has a singlet ground state (singlet-triplet splitting of -1.9 kcal mol-1). Only the phenylcarbyne anions with a triplet ground state react with acetone and dimethyl disulfide via radical mechanisms. On the other hand, only the phenylcarbyne anion with a singlet ground state abstracts H2O and H2C═C═O from acetic acid via electrophilic addition of the reagents to the anion. Finally, two hydroxy-substituted phenylcarbyne anions (with triplet ground states) partially tautomerize with the assistance of reagent molecules to the more stable distonic phenylcarbene anions. This occurs via abstraction of a proton from the reagent by the phenylcarbyne anion to generate a neutral (triplet) phenylcarbene and a reagent anion, which is followed by proton abstraction from the hydroxyl group of the neutral phenylcarbene by the reagent anion to generate the distonic phenylcarbene anion in an excited triplet state. Experiments performed on deuterated hydroxy-substituted phenylcarbyne anions verified the mechanism. The reactivities of the distonic phenylcarbene anions were found to be quite different from those of the phenylcarbyne anions. For example, they were found to abstract CH2 from acetonitrile, which is initiated by C-H insertion─typical singlet carbene reactivity.

Differentiation of Protonated Sulfonate Esters from Isomeric Sulfite Esters and Sulfones by Gas-Phase Ion-Molecule Reactions Followed by Diagnostic Collision-Activated Dissociation in Tandem Mass Spectrometry Experiments.

Sulfonate esters, a class of potentially mutagenic drug impurities, are strictly regulated in pharmaceuticals. On the other hand, sulfite esters and sulfones, analogs of sulfonate esters, have limited safety concerns. However, previously developed analytical methods for sulfonate ester identification cannot be used to differentiate sulfonate esters from the isomeric sulfite esters and sulfones. A tandem mass spectrometric method is introduced here for the differentiation of these compounds. Diisopropoxymethylborane (DIMB) reacts with protonated sulfonate esters, sulfite esters, and sulfones (and many other compounds) in the gas phase to form the product ion [M + H + DIMB - CH3CH(OH)CH3]+. Upon collision-activated dissociation (CAD), these product ions generate diagnostic fragment ions that enable the differentiation of sulfonate esters, sulfite esters, and sulfones from each other. For example, SO2 elimination enabled the unambiguous identification of sulfite esters. On the other hand, elimination of CH3B═O followed by elimination of (CH3)2C═O was only observed for sulfonate esters. Neither type of diagnostic fragment ions was detected for the products of sulfones. However, the product ions formed for sulfones with an additional hydroxyl substituent underwent the elimination of another CH3CH(OH)CH3 molecule, which enabled their identification. Finally, ion-molecule reactions of DIMB with various other functionalities were also examined. Some of them yielded the product ions [M + H + DIMB - CH3CH(OH)CH3]+ but none of these product ions underwent the diagnostic CAD reactions discussed above. Quantum chemical calculations were employed to explore the mechanisms of the reactions. The limits of detection for the diagnostic ion-molecule reaction product ions in high-performance liquid chromatography (HPLC)/mass spectrometry (MS2) experiments were found to range from 0.075 to 1.25 nmol.

Spin-Spin Coupling Controls the Gas-Phase Reactivity of Aromatic σ-Type Triradicals.

Examination of the reactions of σ-type quinolinium-based triradicals with cyclohexane in the gas phase demonstrated that the radical site that is the least strongly coupled to the other two radical sites reacts first, independent of the intrinsic reactivity of this radical site, in contrast to related biradicals that first react at the most electron-deficient radical site. Abstraction of one or two H atoms and formation of an ion that formally corresponds to a combination of the ion and cyclohexane accompanied by elimination of a H atom ("addition-H") were observed. In all cases except one, the most reactive radical site of the triradicals is intrinsically less reactive than the other two radical sites. The product complex of the first H atom abstraction either dissociates to give the H-atom-abstraction product and the cyclohexyl radical or the more reactive radical site in the produced biradical abstracts a H atom from the cyclohexyl radical. The monoradical product sometimes adds to cyclohexene followed by elimination of a H atom, generating the "addition-H" products. Similar reaction efficiencies were measured for three of the triradicals as for relevant monoradicals. Surprisingly, the remaining three triradicals (all containing a meta-pyridyne moiety) reacted substantially faster than the relevant monoradicals. This is likely due to the exothermic generation of a meta-pyridyne analog that has enough energy to attain the dehydrocarbon atom separation common for H-atom-abstraction transition states of protonated meta-pyridynes.

Protonated Ground-State Singlet meta-Pyridynes React from an Excited Triplet State.

The gaseous 2,6-didehydropyridinium cation and its derivatives transfer a proton to reagents for which the reaction for their singlet ground states is too endothermic to be observed. These reactions occur from the lowest-energy excited triplet states, which has not been observed (or reported) for other meta-benzyne analogues. Quantum chemical calculations indicate that the (excited) triplet states are stronger Brønsted acids than their (ground) singlet states, likely due to unfavorable three-center, four-electron interactions in the singlet-state conjugate bases. The cations have substantially smaller (calculated) singlet-triplet (S-T) splittings (ranging from ca. -11 to -17 kcal mol-1) than other related meta-benzyne analogues (e.g., -23.4 kcal mol-1 for the 3,5-isomer). This is rationalized by the destabilization of the singlet states (relative to the triplet states) by reduced (spatial) overlap of the nonbonding molecular orbitals due to the presence of the nitrogen atom between the radical sites (making the ring more rigid). Both the singlet and triplet states are believed to be generated upon formation of these biradicals via energetic collisions due to their small S-T splittings. It appears that once the triplet states are formed, the rate of proton transfer is faster than the rate of intersystem crossing unless the biradicals contain heavy atoms.

Effects of the Distance between Radical Sites on the Reactivities of Aromatic Biradicals.

Coupling of the radical sites in isomeric benzynes is known to hinder their radical reactivity. In order to determine how far apart the radical sites must be for them not to interact, the gas-phase reactivity of several isomeric protonated (iso)quinoline- and acridine-based biradicals was examined. All the (iso)quinolinium-based biradicals were found to react slower than the related monoradicals with similar vertical electron affinities (i.e., similar polar effects). In sharp contrast, the acridinium-based biradicals, most with the radical sites farther apart than in the (iso)quinolinium-based systems, showed greater reactivities than the relevant monoradicals with similar vertical electron affinities. The greater distances between the two radical sites in these biradicals lead to very little or no spin-spin coupling, and no suppression of radical reactivity was observed. Therefore, the radical sites can still interact if they are located on adjacent benzene rings and only after being separated further than that does no coupling occur. The most reactive radical site of each biradical was experimentally determined to be the one predicted to be more reactive based on the monoradical reactivity data. Therefore, the calculated vertical electron affinities of relevant monoradicals can be used to predict which radical site is most reactive in the biradicals.

Recombinant dengue virus-like particles from Pichia pastoris: efficient production and immunological properties.

The envelope glycoprotein (E) of flavivirus is the major structural protein on the surface of the mature virions. The complexes of premembrane (prM) and E play important roles in virus assembly and fusion modulation and in potential immunity-inducing vaccines. In the present study, the cDNA encoding prM and E proteins of dengue virus type 2 (DENV-2) was subcloned into the pGAPZalphaA vector and further integrated into the genome of Pichia pastoris under the control of the glyceraldehyde-3-phosphate dehydrogenase (GAP) constitutive promoter. The high-level constitutive expression of recombinant E antigen was achieved in P. pastoris. Both the cell lysate and the culture supernatant, examined by electron microscopy, were found to contain DENV-2 virus-like particles (VLPs) with diameters of about 30 nm. After immunization of BALB/c mice, the VLPs exhibited similar efficacies as inactivated virus in terms of antibody induction and neutralization titer. These results suggest that recombinant DENV VLPs can be efficiently produced in the GAP promoter-based P. pastoris expression system. This system may be useful for the development of effective and economic dengue subunit vaccine.

Correction: High-aspect-ratio water-dispersed gold nanowires incorporated within gelatin methacrylate hydrogels for constructing cardiac tissues in vitro.

Correction for 'High-aspect-ratio water-dispersed gold nanowires incorporated within gelatin methacrylate hydrogels for constructing cardiac tissues in vitro' by Xiao-Pei Li et al., J. Mater. Chem. B, 2020, 8, 7213-7224, DOI: .

High-aspect-ratio water-dispersed gold nanowires incorporated within gelatin methacrylate hydrogels for constructing cardiac tissues in vitro.

The field of cardiac tissue engineering has made significant strides in therapeutic and pharmaceutical applications, highlighted by the development of smart biomaterials. Scaffolds with appropriate properties mimicking the nature of a heart matrix will be highly beneficial for cardiac tissue engineering. In this study, high-aspect-ratio water-dispersed gold nanowires (AuNWs) were synthesized and incorporated into gelatin methacrylate (GelMA) hydrogels, demonstrating enhanced electrical conductivity and mechanical properties of the biomaterial scaffolds. Cardiac cells cultured on GelMA-AuNW hybrid hydrogels exhibited better biological activities such as cell viability and maturation state compared to those cultured on GelMA hydrogels. Moreover, cardiomyocytes showed synchronous beating activity and a faster spontaneous beating rate on GelMA-AuNW hybrid hydrogels. Our strategy of integrating high-aspect-ratio water-dispersed gold nanowires within gelatin methacrylate hydrogels provides a favorable biomaterial scaffold to construct functional cardiac tissue for further applications in cardiac tissue engineering and drug screening.

Bioinspired DNA nanocockleburs for targeted delivery of doxorubicin.

A variety of three-dimensional DNA assemblies have been proposed as drug carriers owing to their good biocompatibility and easy fabrication. In this study, inspired by the structure of cockleburs, a novel aptamer-tethered DNA assembly was developed for effective targeted drug delivery. The Apt-nanocockleburs were fabricated via a facile process of DNA base pairing: four complementary DNA single strands, including one aptamer-ended strand and three sticky-end strands, were applied to pair with each other. The main body of the nanocockleburs can load doxorubicin (Dox) whilst the covered aptamer spines bind to the target MCF-7 cells. The self-assembled Apt-nanocockleburs exhibit higher cell uptake as well as increased cytotoxicity to MCF-7 cells than DNA nanocockleburs without aptamers. This study provided a DNA constructing platform to produce new drug carriers with high selectivity for cancer targeted drug delivery.

The prevalence and distribution of Chlamydia trachomatis genotypes among sexually transmitted disease clinic patients in Guangzhou, China, 2005-2008.

This study was designed to determine the prevalence and distribution of Chlamydia trachomatis genotypes from clinical specimens in Guangzhou, China, obtained in the period 2005-2008. One hundred and ninety-four urogenital C. trachomatis samples were collected from sexually transmitted disease clinic patients, and the VS1-VS2 of OmpA gene was amplified by nested PCR and sequenced using an ABI-prism 3730 sequencer. Clinical C. trachomatis strains were genotyped and analyzed for a mutation with respect to the reference VS1-VS2 sequence. VS1-VS2 fragments with 453 bp were amplified from 194 clinical samples. Upon alignment with the sequences of the reference strains, 189 strains with discernible sequences were typed into 9 genotypes, while 5 with ambiguous sequences were considered to be mixed-serovar samples. The most prevalent genotypes were E (50, 26%), F (46, 24%), J (35, 19%), and D (24, 13%). There was no significant difference in the distribution of any of the genotypes detected during the study period, except for genotype K (P<0.01). A total of 16 (8%, 16/189) genetic variants of the OmpA VS1-VS2 of the reference strains were identified. Mutations occurred frequently for genotypes D (2/24, 8%), E (6/50, 12%), F (2/46, 4%), G (1/8, 13%), H (1/12, 8%), and K (4/11, 36%), with most of these being sense mutations that may result in amino acid substitution. Sequencing the OmpA VS1-VS2 enabled the genotype and sequence variations within each genotype to be analyzed. Genotypes E, F, J, and D continued to dominate among urogenital C. trachomatis, whereas genotype K increased significantly in Guangzhou between 2005 and 2008.