RESUMO
This work shows that the surface properties of polyurethane acrylate (PUA) films can be controlled by the coating of nanoporous organic networks (NONs). By the NON coating, the hydrophilic nature of nanostructured PUA (N-PUA) film was converted to superhydrophobic surface. The NON-coated N-PUA films (N-PUA-NONs) were applied as stationary adsorbents for the capture of particulate matter (PM) in air. Compared with the original PUA films, the N-PUA-NON films showed much enhanced capture performance toward PM and recyclability through water washing, indicating the potential of outdoor application as stationary self-cleaning adsorbents under natural surroundings.
RESUMO
Cation substitution of Bi3+ with Fe3+ in BiOCl leads to the formation of ionically layered Bi0.7Fe0.3OCl nanosheets. The synthesis follows a hydrolysis route using bismuth(III) nitrate and iron(III) chloride, followed by postannealing at 500 °C. Room temperature electrical conductivity improves from 6.11 × 10-8 S/m for BiOCl to 6.80 × 10-7 S/m for Bi0.7Fe0.3OCl. Correspondingly, the activation energy for electrical conduction reduces from 862 meV for pure BiOCl to 310 meV for Bi0.7Fe0.3OCl. These data suggest improved charge mobility in Bi0.7Fe0.3OCl nanosheets. Density functional theory calculations confirm this behavior by predicting a high density of states near the Fermi level for Bi0.7Fe0.3OCl. The improvement in electrical conductivity is exploited in the electrochemical performance of Bi0.7Fe0.3OCl nanosheets. The insertion capacity of Li+ ions shows an increase of 2.5×, from 215 mAh·.g-1 for undoped BiOCl to 542 mAh·g-1 for Bi0.7Fe0.3OCl after 50 cycles at a current density of 50 mA·g-1. Thus, the direct substitution of Bi3+ sites with Fe3+ in BiOCl results in nanosheets of an ionically layered ternary semiconductor compound which is attractive for Li ion battery anode applications.
RESUMO
This work shows that hollow and microporous organic polymers (H-MOPs) are good templating materials for the synthesis of inorganic material-carbon nanocomposites. The precursor compound, (NH4)2MoS4, was incorporated into H-MOPs. Heat treatment under argon resulted in the formation of hollow MoS2-carbon nanocomposites (MSC). According to microscopic analysis, the MoS2 in the MSC has a layered structure with an elongated interlayer distance. The MSC showed high reversible discharge capacities up to 802 mA h g(-1) after 30 cycles and excellent rate performance for lithium ion batteries. The promising electrochemical performance of the MSC is attributed to the very thin and disordered nature of MoS2 in the carbon skeleton. The role of chemical components of the MSC in the electrochemical process was suggested.
RESUMO
This work reports on the controllable guest entrapment and release behavior of microporous organic hollow spheres (MOHs). Porphyrins which are soluble in both water and methanol were entrapped in the MOHs using methanol solution. The water-soluble porphyrins entrapped in MOHs were not extracted by water due to the hydrophobicity of microporous organic shells. In contrast, the porphyrins were released gradually into aqueous solution by adding water-soluble organic solvents. The release behavior depended on the kind of organic solvents used and on the alkyl chain length of the porphyrin compounds. These properties were applied for the fluorescent alert towards the existence of organic solvents in flowing aqueous media.
RESUMO
Very thin microporous organic networks were formed on the surface of Fe3O4 nanospheres by Sonogashira coupling of tetra(4-ethynylphenyl)methane and 1,4-diiodobenzene. The thickness was controlled by screening the number of building blocks. Through carbonization, Fe3O4@C composites were prepared. The Fe3O4@C composites with 4-6 nm carbon thickness showed promising reversible discharge capacities of up to 807 mA h g(-1) and enhanced electrochemical stability.
RESUMO
The thermolysis of a heterobimetallic Sn-Co organometallic precursor resulted in the formation of hollow Sn/CoOx nanomaterials through galvanic reaction between metal species. The Sn/CoOx nanohollows with 6.1 nm diameter and ~1.5 nm shell thickness showed excellent lithium storage capacity of up to 857 mA h g(-1) after 30 cycles.
RESUMO
Microporous organic network (MON)-Co(3)O(4) composites were obtained via organometallic complexation of cobalt carbonyl with MONs and showed enhanced stability as anode materials due to the buffering effect of MONs.
RESUMO
Through an organometallic approach, ultrathin SnO(x)Fe(y)S(z) plates with ~2 nm single layer-thicknesses were obtained and their graphene composites showed very promising discharge capacities of up to 736 mA h g(-1) and excellent stabilities as anode materials in lithium ion batteries.
RESUMO
Through a solution approach, SnSe(2) nanoplate-graphene composites were prepared and applied as anode materials in lithium ion batteries, showing promising storage performance superior to SnSe(2) nanoplates or graphene alone.