RESUMO
Actuating materials convert different forms of energy into mechanical responses. To satisfy various application scenarios, they are desired to have rich categories, novel functionalities, clear structure-property relationships, fast responses, and, in particular, giant and reversible shape changes. Herein, we report a phase transition-driven ferroelectric crystal, (rac-3-HOPD)PbI3 (3-HOPD = 3-hydroxypiperidine cation), showing intriguingly large and anisotropic room-temperature actuating behaviors. The crystal consists of rigid one-dimensional [PbI3] anionic chains running along the a-axis and discrete disk-like cations loosely wrapping around the chains, leaving room for anisotropic shape changes in both the b- and c-axes. The shape change is switched by a ferroelectric phase transition occurring at around room temperature (294 K), driven by the exceptionally synergistic order-disorder and displacive phase transition. The rotation of the cations exerts internal pressure on the stacking structure to trigger an exceptionally large displacement of the inorganic chains, corresponding to a crystal lattice transformation with length changes of +24.6% and -17.5% along the b- and c-axis, respectively. Single crystal-based prototype devices of circuit switches and elevators have been fabricated by exploiting the unconventional negative temperature-dependent actuating behaviors. This work provides a new model for the development of multifunctional mechanically responsive materials.
RESUMO
Metal halide perovskites (MHPs) have garnered significant attention due to their distinctive optical and electronic properties, coupled with excellent processability. However, the thermal characteristics of these materials are often overlooked, which can be harnessed to cater to diverse application scenarios. We showcase the efficacy of lowering the congruent melting temperature (Tm) of layered 2D MHPs by employing a strategy that involves the modification of flexible alkylammonium through N-methylation and I-substitution. Structural-property analysis reveals that the N-methylation and I-substitution play pivotal roles in reducing hydrogen bond interactions between the organic components and inorganic parts, lowering the rotational symmetry number of the cation and restricting the residual motion of the cations. Additional I···I interactions enhance intermolecular interactions and lead to improved molten stability, as evidenced by a higher viscosity. The 2D MHPs discussed in this study exhibit low Tm and wide melt-processable windows, e.g., (DMIPA)2PbI4 showcasing a low Tm of 98 °C and large melt-processable window of 145 °C. The efficacy of the strategy was further validated when applied to bromine-substituted 2D MHPs. Lowering the Tm and enhancing the molten stability of the MHPs hold great promise for various applications, including glass formation, preparation of high-quality films for photodetection, and fabrication of flexible devices.
RESUMO
The doping strategy effectively enhances the capacity and cycling stability of cobalt-free nickel-rich cathodes. Understanding the intrinsic contributions of dopants is of great importance to optimize the performances of cathodes. This study investigates the correlation between the structure modification and their performances of Mo-doped LiNi0.8Mn0.2O2 (NM82) cathode. The role of doped Mo's valence state has been proved functional in both lattice structural modification and electronic state adjustment. Although the high-valence of Mo at the cathode surface inevitably reduces Ni valence for electronic neutrality and thus causes ion mixing, the original Mo valence will influence its diffusion depth. Structural analyses reveal Mo doping leads to a mixed layer on the surface, where high-valence Mo forms a slender cation mixing layer, enhancing structural stability and Li-ion transport. In addition, it is found that the high-valence dopant of Mo6+ ions partially occupies the unfilled 4d orbitals, which may strengthen the MoâO bond through increased covalency and therefore reduce the oxygen mobility. This results in an impressive capacity retention (90.0% after 200 cycles) for Mo-NM82 cathodes with a high Mo valence state. These findings underscore the valence effect of doping on layered oxide cathode performance, offering guidance for next-generation cathode development.
RESUMO
The assembly of colloidal particles into micro-patterns is essential in optics, informatics, and microelectronics. However, it is still a challenge to achieve quick, reversible, and precise assembly patterns within micro-scale spaces like droplets. Hereby, a method is presented that utilizes in-plane dielectrophoresis to precisely manipulate particle assemblies within microscale droplets. The electro-microfluidic particle assembly platform, equipped with ingenious electrode designs, enables the formation of diverse micro-patterns within a droplet array. The tunability, similarity, stability, and reversibility of this platform are demonstrated. The ability to assemble letters, numbers, and Morse code patterns within the droplet array underscores its potential for information encoding. Furthermore, using an example with four addressing electrodes beneath a droplet, 16 distinct pieces of information through electrical stimuli is successfully encoded. This unique capability facilitates the construction of a dynamic electronic token, indicating promising applications in anti-counterfeiting technologies.
RESUMO
Assembly of the spliceosomal small nuclear ribonucleoparticle (snRNP) core requires the participation of the multisubunit SMN (survival of motor neuron) complex, which contains SMN and several Gemin proteins. The SMN and Gemin2 subunits directly bind Sm proteins, and Gemin5 is required for snRNP biogenesis and has been implicated in snRNA recognition. The RNA sequence required for snRNP assembly includes the Sm site and an adjacent 3' stem-loop, but a precise understanding of Gemin5's RNA-binding specificity is lacking. Here we show that the N-terminal half of Gemin5, which is composed of two juxtaposed seven-bladed WD40 repeat domains, recognizes the Sm site. The tandem WD40 repeat domains are rigidly held together to form a contiguous RNA-binding surface. RNA-contacting residues are located mostly on loops between ß strands on the apical surface of the WD40 domains. Structural and biochemical analyses show that base-stacking interactions involving four aromatic residues and hydrogen bonding by a pair of arginines are crucial for specific recognition of the Sm sequence. We also show that an adenine immediately 5' to the Sm site is required for efficient binding and that Gemin5 can bind short RNA oligos in an alternative mode. Our results provide mechanistic understandings of Gemin5's snRNA-binding specificity as well as valuable insights into the molecular mechanism of RNA binding by WD40 repeat proteins in general.
Assuntos
Modelos Moleculares , RNA Nuclear Pequeno/metabolismo , Proteínas do Complexo SMN/química , Proteínas do Complexo SMN/metabolismo , Repetições WD40/fisiologia , Cristalização , Guanosina/análogos & derivados , Guanosina/metabolismo , Humanos , Ligação Proteica , Estrutura Terciária de Proteína , RNA Nuclear Pequeno/químicaRESUMO
Solid polymer electrolytes (SPEs) are promising for high-energy-density solid-state Li metal batteries due to their decent flexibility, safety, and interfacial stability. However, their development was seriously hindered by the interfacial instability and limited conductivity, leading to inferior electrochemical performance. Herein, we proposed to design ultra-thin solid-state electrolyte with long-range cooperative ion transport pathway to effectively increase the ionic conductivity and stability. The impregnation of PVDF-HFP inside pores of fluorinated covalent organic framework (CF3-COF) can disrupt its symmetry, rendering rapid ion transportation and inhibited anion imigration. The functional groups of CF3-COF can interact with PVDF-HFP to form fast Li+ transport channels, which enables the uniform and confined Li+ conduction within the electrolyte. The introduction of CF3-COF also enhances the mechanical strength and flexibility of SPEs, as well as ensures homogeneous Li deposition and inhibited dendrite growth. Hence, a remarkably high conductivity of 1.21×10-3 S cm-1 can be achieved. Finally, the ultra-thin SPEs with an extremely long cycle life exceed 9000 h can be obtained (the longest cycle life reported until now) while the NCM523/Li pouch cell demonstrates a high capacity of 760 mAh and 96% capacity retention after cycling, holding great promises to be utilized for practical solid-state Li metal batteries.
RESUMO
Mechanistic target of rapamycin complex 2 (mTORC2) is a multi-subunit kinase complex, central to multiple essential signaling pathways. Two core subunits, Rictor and mSin1, distinguish it from the related mTORC1 and support context-dependent phosphorylation of its substrates. mTORC2 structures have been determined previously; however, important questions remain, particularly regarding the structural determinants mediating substrate specificity and context-dependent activity. Here, we used cryo-EM to obtain high-resolution structures of the human mTORC2 apo-complex in the presence of substrates Akt and SGK1. Using functional assays, we then tested predictions suggested by substrate-induced structural changes in mTORC2. For the first time, we visualized in the apo-state the side chain interactions between Rictor and mTOR that sterically occlude recruitment of mTORC1 substrates and confer resistance to the mTORC1 inhibitor rapamycin. Also in the apo-state, we observed that mSin1 formed extensive contacts with Rictor via a pair of short α-helices nestled between two Rictor helical repeat clusters, as well as by an extended strand that makes multiple weak contacts with Rictor helical cluster 1. In co-complex structures, we found that SGK1, but not Akt, markedly altered the conformation of the mSin1 N-terminal extended strand, disrupting multiple weak interactions while inducing a large rotation of mSin1 residue Arg-83, which then interacts with a patch of negatively charged residues within Rictor. Finally, we demonstrate mutation of Arg-83 to Ala selectively disrupts mTORC2-dependent phosphorylation of SGK1, but not of Akt, supporting context-dependent substrate selection. These findings provide new structural and functional insights into mTORC2 specificity and context-dependent activity.
Assuntos
Proteínas Imediatamente Precoces , Proteínas Monoméricas de Ligação ao GTP , Proteínas Serina-Treonina Quinases , Proteínas Proto-Oncogênicas c-akt , Proteína Companheira de mTOR Insensível à Rapamicina , Humanos , Proteínas Imediatamente Precoces/metabolismo , Alvo Mecanístico do Complexo 1 de Rapamicina/metabolismo , Proteínas Monoméricas de Ligação ao GTP/metabolismo , Fosforilação , Proteínas Serina-Treonina Quinases/metabolismo , Proteínas Proto-Oncogênicas c-akt/genética , Proteínas Proto-Oncogênicas c-akt/metabolismo , Proteína Companheira de mTOR Insensível à Rapamicina/genética , Proteína Companheira de mTOR Insensível à Rapamicina/metabolismo , Sirolimo/farmacologia , Fatores de Transcrição/metabolismoRESUMO
Metastasis is the main death reason for triple-negative breast cancer (TNBC). Thus, identifying the driver genes associated with metastasis of TNBC is urgently needed. CRISPR screens have dramatically enhanced genome editing and made it possible to identify genes associated with metastasis. In this study, we identified and explored the crucial role of ras homolog family member V (RhoV) in TNBC metastasis. Here, we performed customized in vivo CRISPR screens targeting metastasis-related genes obtained from transcriptome analysis of TNBC. The regulatory role of RhoV in TNBC was validated using gain- or loss-of-function studies in vitro and in vivo. We further conducted immunoprecipitation and LC-MS/MS to explore the metastasis mechanism of RhoV. In vivo functional screens identified RhoV as a candidate regulator involved in tumor metastasis. RhoV was frequently upregulated in TNBC and correlated with poor survival. Knockdown of RhoV significantly suppressed cell invasion, migration, and metastasis both in vitro and in vivo. In addition, we provided evidence that p-EGFR interacted with RhoV to activate the downstream signal pathway of RhoV, thereby promoting tumor metastasis. We further confirmed that this association was dependent on GRB2 through a specific proline-rich motif in the N-terminus of RhoV. This mechanism of RhoV is unique, as other Rho family proteins lack the proline-rich motif in the N-terminus.
Assuntos
Neoplasias de Mama Triplo Negativas , Humanos , Linhagem Celular Tumoral , Movimento Celular/genética , Proliferação de Células , Cromatografia Líquida , Repetições Palindrômicas Curtas Agrupadas e Regularmente Espaçadas , Espectrometria de Massas em Tandem , Neoplasias de Mama Triplo Negativas/metabolismoRESUMO
Circular dichroism (CD) spectroscopy is a well-known and powerful technique widely used for distinguishing chiral enantiomers based on their differential absorbance of the right and left circularly polarized light. With the increasing demand for solid-state chiral optics, CD spectroscopy has been extended to elucidate the chirality of solid-state samples beyond the traditional solution state. However, due to the sample preparation differential, the CD spectra of the same compound measured by different researchers may not be mutually consistent. In this study, we employ solution, powder, thin-film, and single-crystal samples to explore the challenges associated with CD measurements and distinguish between genuine and fake signals. Rational fabrication of the solid-state samples can effectively minimize the macroscopic anisotropic nature of the samples and thereby mitigate the influence of linear dichroism (LD) and linear birefringence (LB) effects, which arise from anisotropy-induced differences in the absorbances and refractive indices. The local anisotropic and overall isotropic features of the high-quality thin-film sample achieve an optically isotropic state, which exhibits superior CD signal repeatability at the front and back sides at different angles by rotating the sample along the light path. In addition, sample thickness-induced CD signal overload and absorption saturation pose more severe challenges than the LBLD-induced amplified CD signal but are rarely focused on. The CD signal overload in the deep UV region leads to the presence of fake signals, while absorption saturation results in a complete loss of the CD signal. These findings help obtain accurate CD signals by a well-fabricated optically isotropic sample to avoid LDLB and optimize the sample thickness to avoid fake signals and no signals.
RESUMO
Droplet array is widely applied in single cell analysis, drug screening, protein crystallization, etc. This work proposes and validates a method for rapid formation of uniform droplet array based on microwell confined droplets electro-coalescence of screen-printed emulsion droplets, namely electro-coalescence droplet array (ECDA). The electro-coalescence of droplets is according to the polarization induced electrostatic and dielectrophoretic forces, and the dielectrowetting effect. The photolithographically fabricated microwells are highly regular and reproducible, ensuring identical volume and physical confinement to achieve uniform droplet array, and meanwhile the microwell isolation protects the paired water droplets from further fusion and broadens its feasibility to different fluidic systems. Under optimized conditions, a droplet array with an average diameter of 85 µm and a throughput of 106 in a 10 cm × 10 cm chip can be achieved within 5 s at 120 Vpp and 50 kHz. This ECDA chip is validated for various microwell geometries and functional materials. The optimized ECDA are successfully applied for digital viable bacteria counting, showing comparable results to the plate culture counting. Such an ECDA chip, as a digitizable and high-throughput platform, presents excellent potential for high-throughput screening, analysis, absolute quantification, etc.
RESUMO
Two-dimensional polystyrene sphere opals are important materials for nanotechnology applications and fundamental nanoscience research. They are a facile and inexpensive nanofabrication tool, but the quality factor of these opals has drastic differences between reports. Additives like ethanol, ions, and organic molecules in the aqueous particle spreading solution are known to affect the quality factor and growth efficiency of the produced opals. However, a systematic study on the effect and optimization of some of the most effective additives has not been reported until now. Here, we investigate the influence of additives on the growth efficiency and quality factor of such monolayers formed at the air-water interface without the use of a Langmuir-Blodgett trough. The additives induced large variations in the monolayer quality factor and growth efficiency, and we found that the ideal additive content of the spreading agents is 30 wt % < cethanol < 70 wt %, 0 < cH2SO4 < 30.5 mM, and 0 < csty < 255.0 mM. This study provides a guideline for the rational composition and additive content of the spreading solution to obtain high-quality two-dimensional opals for further applications in nanofabrication and photonics and will enable researchers and application engineers to produce standardized nanofabrication materials.
RESUMO
Electrowetting-on-dielectric (EWOD) technology has been considered as a promising candidate for digital microfluidic (DMF) applications due to its outstanding flexibility and integrability. The dielectric layer with a hydrophobic surface is the key element of an EWOD device, determining its driving voltage, reliability, and lifetime. Hereby, inspired by the ionic-liquid-filled structuring polymer with high capacitance independent on thickness, namely ion gel (IG), we develop a polymer (P)-ion gel-amorphous fluoropolymer, namely, PIGAF, composite film as a replaceable hydrophobic dielectric layer for fabrication of a high-efficiency and stable EWOD-DMF device at relatively low voltage. The results show that the proposed EWOD devices using the PIGAF-based dielectric layer can achieve a large contact angle (θ) change of â¼50° and excellent reversibility with a contact angle hysteresis of ≤5° at a relatively low voltage of 30 Vrms. More importantly, the EWOD actuation voltage did not change obviously with the PIGAF film thickness in the range of several to tens of microns, enabling the thickness of the film to be adjusted according to the demand within a certain range while keeping the actuation voltage low. An EWOD-DMF device can be prepared by simply stacking a PIGAF film onto a PCB board, demonstrating stable droplet actuation (motion) at 30 Vrms and 1 kHz as well as a maximum moving velocity of 69 mm/s at 140 Vrms and 1 kHz. The PIGAF film was highly stable and reliable, maintaining excellent EWOD performance after multiple droplet manipulations (≥50 cycles) or long-term storage of 1 year. The proposed EWOD-DMF device has been demonstrated for digital chemical reactions and biomedical sensing applications.
RESUMO
A two-dimensional (2D) organic-inorganic hybrid perovskite (OIHP) material with out-of-plane ferroelectricity is the key to the miniaturization of vertical-sandwich-type ferroelectric optoelectronic devices. However, 2D OIHP ferroelectrics with out-of-plane polarization are still scarce, and effective design strategies are lacking. Herein, we report a novel 2D Dion-Jacobson perovskite ferroelectric semiconductor synthesized by a rigid-to-flexible cationic tailoring strategy, achieving an out-of-plane polarization of 1.7 µC/cm2 and high photoresponse. Integrating out-of-plane ferroelectricity with excellent photoelectric properties affords a promising platform to investigate ferroelectricity-related effects in vertical optoelectronic devices.
RESUMO
The intestinal invasion of pathogenic microorganisms can have serious health consequences. Recent evidence has shown that the N6-methyladenosine (m6A) mRNA modification is closely associated with innate immunity; however, the underlying mechanism is poorly understood. Here, we examined the function and mechanism of m6A mRNA modification and the YTH domain-containing protein YTHDF1 (YTH N6-methyladenosine RNA-binding protein 1) in the innate immune response against bacterial pathogens in the intestine. Ribo-seq and m6A-seq analyses revealed that YTHDF1 directs the translation of Traf6 mRNA, which encodes tumor necrosis factor receptor-associated factor 6, thereby regulating the immune response via the m6A modification near the transcript's stop codon. Furthermore, we identified a unique mechanism by which the P/Q/N-rich domain in YTHDF1 interacts with the DEAD domain in the host factor DDX60, thereby regulating the intestinal immune response to bacterial infection by recognizing the target Traf6 transcript. These results provide novel insights into the mechanism by which YTHDF1 recognizes its target and reveal YTHDF1 as an important driver of the intestinal immune response, opening new avenues for developing therapeutic strategies designed to modulate the intestinal immune response to bacterial infection.
Assuntos
Infecções por Escherichia coli/imunologia , Imunidade Inata , Peptídeos e Proteínas de Sinalização Intracelular/imunologia , Proteínas de Ligação a RNA/imunologia , Animais , Células CACO-2 , Escherichia coli Enterotoxigênica/imunologia , Células Epiteliais , Humanos , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Knockout , Suínos , Fator 6 Associado a Receptor de TNF/imunologiaRESUMO
TRiC/CCT assists the folding of â¼10% of cytosolic proteins through an ATP-driven conformational cycle and is essential in maintaining protein homeostasis. Here, we determined an ensemble of cryo-electron microscopy (cryo-EM) structures of yeast TRiC at various nucleotide concentrations, with 4 open-state maps resolved at near-atomic resolutions, and a closed-state map at atomic resolution, revealing an extra layer of an unforeseen N-terminal allosteric network. We found that, during TRiC ring closure, the CCT7 subunit moves first, responding to nucleotide binding; CCT4 is the last to bind ATP, serving as an ATP sensor; and CCT8 remains ADP-bound and is hardly involved in the ATPase-cycle in our experimental conditions; overall, yeast TRiC consumes nucleotide in a 2-ring positively coordinated manner. Our results depict a thorough picture of the TRiC conformational landscape and its allosteric transitions from the open to closed states in more structural detail and offer insights into TRiC subunit specificity in ATP consumption and ring closure, and potentially in substrate processing.
Assuntos
Chaperonina com TCP-1/metabolismo , Chaperonina com TCP-1/ultraestrutura , Adenosina Trifosfatases/metabolismo , Chaperonina com TCP-1/fisiologia , Chaperoninas/metabolismo , Microscopia Crioeletrônica/métodos , Modelos Moleculares , Conformação Molecular , Dobramento de Proteína , Subunidades Proteicas/metabolismo , Proteostase , Saccharomyces cerevisiae/metabolismo , Proteínas de Saccharomyces cerevisiae/metabolismo , Relação Estrutura-Atividade , Especificidade por Substrato/fisiologiaRESUMO
Prefocusing of cell mixtures through sheath flow is a common technique used for continuous and high-efficiency dielectrophoretic (DEP) cell separation. However, it usually limits the separation flow velocity and requires a complex multichannel fluid control system that hinders the integration of a DEP separator with other microfluidic functionalities for comprehensive biomedical applications. Here, we propose and develop a high-efficiency, sheathless particle/cell separation method without prefocusing based on flow-field-assisted DEP by combining the effects of AC electric field (E-field) and flow field (F-field). A hollow lemon-shaped electrode array is designed to generate a long-range E-field gradient in the microchannel, which can effectively induce lateral displacements of particles/cells in a continuous flow. A series of arc-shaped protrusion structures is designed along the microchannel to form a F-field, which can effectively guide the particles/cells toward the targeted E-field region without prefocusing. By tuning the E-field, two distinct modes can be realized and switched in one single device, including the sheathless separation (ShLS) and the adjustable particle mixing ratio (AMR) modes. In the ShLS mode, we have achieved the continuous separation of breast cancer cells from erythrocytes with a recovery rate of 95.5% and the separation of polystyrene particles from yeast cells with a purity of 97.1% at flow velocities over 2.59 mm/s in a 2 cm channel under optimized conditions. The AMR mode provides a strategy for controlling the mixing ratio of different particles/cells as a well-defined pretreatment method for biomedical research studies. The proposed microchip is easy to use and displays high versatility for biological and medical applications.
Assuntos
Técnicas Analíticas Microfluídicas , Separação Celular , Eletrodos , Eletroforese , Microfluídica , Fenômenos FísicosRESUMO
Lactic acid bacteria (LAB) play a key role in promoting health and preventing diseases because of their beneficial effects, such as antimicrobial activities, modulating immune responses, maintaining the gut epithelial barrier and antioxidant capacity. However, the mechanisms with which LAB relieve oxidative stress and intestinal injury induced by diquat in vivo are poorly understood. In the present study, Pediococcus pentosaceus ZJUAF-4 (LAB, ZJUAF-4), a selected probiotics strain with strong antioxidant capacities, was appointed to evaluate the efficiency against oxidative stress in diquat-induced intestinal injury of mice. Alanine transaminase (ALT) and aspartate aminotransferase (AST) were analyzed to estimate the liver injury. The intestinal permeability was evaluated by 4 kDa fluorescein isothiocyanate (FITC)-dextran (FD4), D-lactate (DLA), and diamine oxidase (DAO) levels. Jejunum reactive oxygen species (ROS) production was examined by dihydroethidium (DHE) staining. Western blotting was used to detect the expression of nuclear factor (erythroid-derived-2)-like 2 (Nrf2) and its downstream genes in jejunum. The gut microbiota was analyzed by high-throughput sequencing method based on the 16S rRNA genes. The results showed that ZJUAF-4 pretreatment was found to protect the intestinal barrier function and maintain intestinal redox homeostasis under diquat stimulation. Moreover, oral administration of ZJUAF-4 increased the expression of Nrf2 and its downstream genes. High-throughput sequencing analysis indicated that ZJUAF-4 contributed to restoring the gut microbiota influenced by diquat. Our results suggested that ZJUAF-4 protected the intestinal barrier from oxidative stress-induced damage by modulating the Nrf2 pathway and gut microbiota, indicating that ZJUAF-4 may have potential applications in preventing and treating oxidative stress-related intestinal diseases. KEY POINTS: ⢠ZJUAF-4 exerted protective effects against diquat-induced intestinal injury. ⢠Activation of Nrf2 and its downstream targets towards oxidative stress. ⢠ZJUAF-4 administration restoring gut microbiota.
Assuntos
Microbioma Gastrointestinal , Enteropatias , Animais , Diquat , Camundongos , Estresse Oxidativo , Pediococcus pentosaceus , RNA Ribossômico 16S/genéticaRESUMO
A novel bacteriocin secreted by Clostridium butyricum ZJU-F1 was isolated using ammonium sulfate fractionation, cation exchange chromatography, affinity chromatography, and reverse-phase high-performance liquid chromatography (RP-HPLC). The bacteriocin, named CBP22, contained 22 amino acids with the sequence PSAWQITKCAGSIAWALGSGIF. Analysis of its structure and physicochemical properties indicated that CBP22 had a molecular weight of 2264.63 Da and a +1 net charge. CBP22 showed activity against E. col K88, E. coli ATCC25922, and S. aureus ATCC26923. The effects and potential mechanisms of bacteriocin CBP22 on the innate immune response were investigated with a lipopolysaccharide- (LPS-) induced mouse model. The results showed that pretreatment with CBP22 prevented LPS-induced impairment in epithelial tissues and significantly reduced serum levels of IgG, IgA, IgM, TNF-α, and sIgA. Moreover, CBP22 treatment increased the expression of the zonula occludens and reduced permeability as well as apoptosis in the jejunum in LPS-treated mice. In summary, CBP22 inhibits the intestinal injury and prevents the gut barrier dysfunction induced by LPS, suggesting the potential use of CBP22 for treating intestinal damage.
Assuntos
Proteínas de Bactérias/química , Bacteriocinas/química , Clostridium butyricum/metabolismo , Intestinos/lesões , Intestinos/microbiologia , Lipopolissacarídeos/metabolismo , Proteínas de Junções Íntimas/metabolismo , Sulfato de Amônio/química , Animais , Anti-Infecciosos/farmacologia , Apoptose , Escherichia coli , Hemólise , Masculino , Camundongos , Camundongos Endogâmicos ICR , Microesferas , Permeabilidade , Prebióticos , Staphylococcus aureus , Fator de Necrose Tumoral alfa/sangueRESUMO
Hematite is recognized as an excellent photocatalyst for photoelectrochemical photoanodes for water oxidation because of its favorable band gap, excellent anti-photocorrosion and structural stability in alkaline solution. However, slow charge transport and fast carrier recombination in the bulk and at the hematite photoanode/electrolyte interface, have limited its applications for water splitting. Herein, we report a highly efficient hematite/ferrhydrite (Fh) core-shell photoanode system, consisting of hematite (α-Fe2O3) semiconductor nanorods which dramatically enhance light harvesting, and ferrhydrite as the hole-storage shell. Our integrated hematite/ferrhydrite core-shell photoanode shows 2.7 times increased photo-current density under simulated sun light irradiation.
RESUMO
The eukaryotic group II chaperonin TRiC/CCT assists the folding of 10% of cytosolic proteins including many key structural and regulatory proteins. TRiC plays an essential role in maintaining protein homeostasis, and dysfunction of TRiC is closely related to human diseases including cancer and neurodegenerative diseases. TRiC consists of eight paralogous subunits, each of which plays a specific role in the assembly, allosteric cooperativity, and substrate recognition and folding of this complex macromolecular machine. TRiC-mediated substrate folding is regulated through its ATP-driven conformational changes. In recent years, progresses have been made on the structure, subunit arrangement, conformational cycle, and substrate folding of TRiC. Additionally, accumulating evidences also demonstrate the linkage between TRiC oligomer or monomer and diseases. In this review, we focus on the TRiC structure itself, TRiC assisted substrate folding, TRiC and disease, and the potential therapeutic application of TRiC in various diseases.