RESUMO
In this paper, we present a novel form of a partially coherent beam characterized by classical entanglement in higher dimensions. We coin the term "twisted vector vortex (TVV) beam" to describe this phenomenon. Similar to multi-partite quantum entangled states in higher dimensions, the partially coherent twisted vector vortex beam possesses distinct properties such as non-uniform polarization, vortex phase, and twist phase. Through experiments, we offer empirical evidence for these three degrees-of-freedom in the light field. The results demonstrate that the state of the light is inseparable in terms of polarization and orbital angular momentum (OAM) modes. Additionally, the twist phase introduces an additional dimension in controlling the vector vortex beam. This research reveals the possibility of new controlling dimensions in classical entanglement through the chirality of coherence within partially coherent light. Consequently, this opens up new avenues for the utilization of partially coherent light in both classical and quantum domains.
RESUMO
In this study, a twisted correlated optical beam with a dark hollow center in its average intensity is synthesized by correlated correlation perturbation and incoherent mode superposition. This new hollow beam has a topological charge (TC) mode with a zero value compared with a coherence vortex that has a TC mode with a nonzero value. We transform the twisted correlated beam from solid centered to dark hollow centered by constructing a correlation between the twist factor and the spot structure parameter. Theoretical and experimental results show that twist correlation makes the random optical beam an asymmetric orbital angular momentum spectral distribution and a tunable intensity center. Controlling the correlation parameters can make the focal spot of the twisted beam a dark core when the dominant mode of the TC is still zero. The new nontrivial beams and their proposed generation method provide important technical preparations for the optical particle manipulation with low coherence environment.
RESUMO
A rapid and accurate diagnostic modality is essential to prevent the spread of SARS-CoV-2. In this study, we proposed a SARS-CoV-2 detection sensor based on surface-enhanced Raman scattering (SERS) to achieve rapid and ultrasensitive detection. The sensor utilized spike protein deoxyribonucleic acid aptamers with strong affinity as the recognition entity to achieve high specificity. The spherical cocktail aptamers-gold nanoparticles (SCAP) SERS substrate was used as the base and Au nanoparticles modified with the Raman reporter molecule that resonates with the excitation light and spike protein aptamers were used as the SERS nanoprobe. The SCAP substrate and SERS nanoprobes were used to target and capture the SARS-CoV-2 S protein to form a sandwich structure on the Au film substrate, which can generate ultra-strong "hot spots" to achieve ultrasensitive detection. Analysis of SARS-CoV-2 S protein was performed by monitoring changes in SERS peak intensity on a SCAP SERS substrate-based detection platform. This assay detects S protein with a LOD of less than 0.7 fg mL-1 and pseudovirus as low as 0.8 TU mL-1 in about 12 min. The results of the simulated oropharyngeal swab system in this study indicated the possibility of it being used for clinical detection, providing a potential option for rapid and accurate diagnosis and more effective control of SARS-CoV-2 transmission.
Assuntos
Aptâmeros de Nucleotídeos , Técnicas Biossensoriais , COVID-19 , Nanopartículas Metálicas , Humanos , Glicoproteína da Espícula de Coronavírus , Nanopartículas Metálicas/química , Ouro/química , Análise Espectral Raman/métodos , COVID-19/diagnóstico , SARS-CoV-2 , Aptâmeros de Nucleotídeos/química , Técnicas Biossensoriais/métodosRESUMO
This work investigates how independent perturbations and cross-correlation perturbations affect optical vortex beams. Theoretical and experimental results show that both perturbations cause the intensity, average orbital angular momentum (OAM), and the OAM spectrum of the vortex beam to vary periodically with the perturbation direction, but with different periods. When the beam is subjected to independent perturbations, the average OAM changes periodically with θ in every π/2; when the beam is subjected to cross-correlation perturbations, the average OAM varies with θ in every π. The results of this work provide a method to control the OAM and regulate low-coherence vortex beams in turbulent environments.
RESUMO
A surface enhanced Raman scattering (SERS) method is described for the determination of vanillin, methyl vanillin and ethyl vanillin at trace levels. Flower-like silver nanoparticles on a silicon wafer are used as the SERS substrate, and the analytes can be specifically and non-destructively recognized by their specific Raman bands. The molecules can be recognized rapidly by identifying the characteristic bands. The SERS spectra of vanillin (C8H8O3) were used as mid-contrast, and specific bands of methyl vanillin and ethyl vanillin (C9H10O3) were acquired at 775 cm-1, 1350 cm-1 and 1282 cm-1, 1382 cm-1, respectively. In addition, by using an improved principal component analysis (PCA) algorithm, the organic molecule can be quantitatively determined. Dissolved in water, vanillin, methyl vanillin and ethyl vanillin still can be detected at a concentration of 10-8 M, at which their characteristic Raman peaks are still visible. The method was successfully applied to the determination of vanillin in milk powder products. Graphical abstract Vanillin can be identified at trace levels by laser irradiation of milk and by using flower-like silver nanoparticles as the surface enhanced Raman scattering (SERS) substrate. Vanillin and its methyl and ethyl derivatives can be quantitatively analyzed by the principal component analysis (PCA) algorithm.
RESUMO
In the surface ehanced Raman scattering (SERS) technology, not only to improve the making process of SERS substrates, to be fast and easily, but also to enhance the SERS enhance factor, an easy replacement reaction between zinc and silver nitrate solution has been adopted to prepare silver micro-structures SERS-active substrate. The silver micro-substrates have many advantages. These substrates have good stability, well preservation, an easy making method and a fast making process. The surface profile of the silver microparticles is investigated by scanning electron microscope (SEM). The silver microstructures are dendritic shape in a symmetrical fashion with symmetrical distribution. When the time of the replace reaction is 40, 50 and 60 s, respectively, the average lengths of "trunks" in the silver dendritic microsubstractes are about 3, 5 and 10 µm, and the lengths of the "branches" are about 700 nm, 2 µm and 3 µm, respectively. The result shows that the longer time the replacement reaction takes, the longer lengths of the "trunks" and "branches" in the silver dendritic microsubstractes become. With the time of replace reaction increasing, the "trunk" and "branch" in the silver dendritic microsubstractes grow longer and a large amount of nano-level "leaves" grow out from the "branches" of the silver dendritic microsubstractes, so the silver micro size dendrates have nano level structure on surface. In order to investigate the SERS-active substrates application in SERS, a Fourier transform Raman spectrograph with a 1 064 nm laser wavelength is used to measure the SERS spectra. And good SERS spectra have been obtained by using dendritic silver microsubstrates on the silicon chip as a SERS substract, and Rhodamine 6G (R6G) as a molecule probe. It is found that the silver micro-substrates have good Raman characteristics. And comparing these SERS spectra, it gets the conclution that the spectra with best SERS enhance effect are obtained when R6G is obsorbed on the silver dendritic micro-substractes whose preparing time is 40s, and at that time, the analytical enhancement factor for SERS signals is approximately 10(3). And when the silicon ships are dealed with surfactants Polyvinylpyrrolidone (PVP) and keeping the other conditions the same as before, the SERS enhance effect of the spectra becomes better, and the enhancement factor turn to be approximately 10(4). What's more, the silver microstructures can be preserved several monthes under deionized water and the repeatment of the expriment result is well in general.
RESUMO
Basic principles, development trends and applications status of distributed optical fiber Raman temperature sensor (DTS) are introduced. Performance parameters of DTS system include the sensing optical fiber length, temperature measurement uncertainty, spatial resolution and measurement time. These parameters have a certain correlation and it is difficult to improve them at the same time by single technology. So a variety of key techniques such as Raman amplification, pulse coding technique, Raman related dual-wavelength self-correction technique and embedding optical switching technique are researched to improve the performance of the DTS system. A 1 467 nm continuous laser is used as pump laser and the light source of DTS system (1 550 nm pulse laser) is amplified. When the length of sensing optical fiber is 50 km the Raman gain is about 17 dB. Raman gain can partially compensate the transmission loss of optical fiber, so that the sensing length can reach 50 km. In DTS system using pulse coding technique, pulse laser is coded by 211 bits loop encoder and correlation calculation is used to demodulate temperature. The encoded laser signal is related, whereas the noise is not relevant. So that signal-to-noise ratio (SNR) of DTS system can be improved significantly. The experiments are carried out in DTS system with single mode optical fiber and multimode optical fiber respectively. Temperature measurement uncertainty can all reach 1 degrees C. In DTS system using Raman related dual-wavelength self-correction technique, the wavelength difference of the two light sources must be one Raman frequency shift in optical fiber. For example, wavelength of the main laser is 1 550 nm and wavelength of the second laser must be 1 450 nm. Spatial resolution of DTS system is improved to 2 m by using dual-wavelength self-correction technique. Optical switch is embedded in DTS system, so that the temperature measurement channel multiply extended and the total length of the sensing optical fiber effectively extended. Optical fiber sensor network is composed.
RESUMO
A simple and low-cost vibration sensor based on single-mode nonadiabatic fiber tapers is proposed and demonstrated. The environmental vibrations can be detected by demodulating the transmission loss of the nonadiabatic fiber taper. Theoretical simulations show that the transmission loss is related to the microbending of the fiber taper induced by vibrations. Unlike interferometric sensors, this vibration sensor does not need any feedback loop to control the quadrature point to obtain a stable performance. In addition, it has no requirement for the coherence of the light source and is insensitive to temperature changes. Experimental results show that this sensing system has a wide frequency response range from a few hertz to tens of kilohertz with the maximal signal to noise ratio up to 73 dB.
RESUMO
In this study, we investigated an absorber based on a center-aligned tandem nanopillar array for ultra-broadband solar energy harvesting theoretically. A high-efficiency, omnidirectional absorber was obtained by introducing the center-aligned tandem nanopillar array embedded in an Al2O3 dielectric layer. The multi-coupling modes at different wavelengths were interpreted. The strong absorption can be adjusted by changing the radii and heights of nanopillars. According to the simulation results, the average absorptance of the absorber exceeded 94% in the wavelength range from 300 nm to 2000 nm. In addition, the high-efficiency absorption was insensitive to the incident angle and polarization state. The research not only proposed an absorber which possesses a huge potential value for application areas, such as thermal photovoltaic systems, infrared detection, and isotropic absorption sensors, but also pointed out a new way to design an absorber with high efficiency in an ultrabroad wavelength range.
RESUMO
By inscribing a long-period fiber grating (LPG) on a polarization-maintaining fiber (PMF), a fiber Sagnac loop sensor for simultaneous measurement of refractive index and temperature has been proposed and demonstrated. The LPG was fabricated on the PMF by using a CO2 laser, and then inserted into a fiber loop formed by using a normal single-mode fiber coupler. One of the transmission minimum of the Sagnac loop sensor was measured, whose wavelength varied with temperature and the intensity changed with refractive index. Temperature sensitivity of -0.654 nm x degrees C(-1) and refractive sensitivity of 49.9 dB x RIU(-1) have been achieved. The sensor system shows advantages of small size and low cost, and owns a good application prospect.
RESUMO
Prescription drug abuse can lead to serious medical negligence, so there is an urgent need to address its screening problem. Gliclazide is widely used as an antihypertensive drug for lowering blood sugar, but its excessive intake can cause serious harm to human body. Here we take gliclazide as an example to provide a method to realize the screening of drug abuse. Flower-like silver nanoparticles were prepared as surface enhanced Raman scattering (SERS) substrate, which can quantitatively and accurately detect the concentration of gliclazide. To understanding the enhanced activity of flower-like silver substrates, the Finite-Difference Time-Domain (FDTD) simulation model was established, and the simulation results showed that flower-like silver had high SERS substrate activity as well as enhanced hot spots at the rough particle surface and the adjacent particles. The experimental results indicated that the flower-shaped silver had an excellent Raman enhancement effect using R6G as detection molecules. When the gliclazide solutions with different concentration gradients were tested, the molecular vibrational modes were also obtained using Gaussian calculations. The rapid and accurate detection of gliclazide concentration was processed by Principal Component Analysis, which were consistent with the experiment, suggesting the importance of the combination of experiment and calculation. Finally, SERS substrate test was performed on the daily medication gliclazide tablets (II), which proved that the flower-like silver still has great Raman enhancement effect on the detection of actual samples.
Assuntos
Análise Espectral Raman/métodos , Detecção do Abuso de Substâncias/métodos , Simulação por Computador , Gliclazida/análise , Humanos , Nanopartículas Metálicas/química , Modelos Químicos , Análise de Componente Principal , Prata/química , Comprimidos , VibraçãoRESUMO
A design for a one-dimensional photonic crystal (1D PhC) based on thin-film optics is proposed to improve the light extraction efficiency of phosphor-converted flip-chip white-light-emitting diodes (LEDs). The 1D PhC thin film consisting of alternating layers of TiO2 and SiO2 is added between a phosphor layer and sapphire substrate of the LEDs. Monte Carlo simulation method is introduced to analyze performance of the proposed LEDs with a 1D PhC. Results show that the light extraction efficiency is higher than that of conventional LEDs by 16%, and the correlated color temperature becomes lower, below 4000 K. These improvements are attributed to the efficient extraction of backscattered light from the phosphor layer by using the 1D PhC thin film.