RESUMO
BACKGROUND: Drug-resistant tuberculosis (TB) is a major threat to global public health. Whole-genome sequencing (WGS) is a useful tool for species identification and drug resistance prediction, and many clinical laboratories are transitioning to WGS as a routine diagnostic tool. However, user-friendly and high-confidence automated bioinformatics tools are needed to rapidly identify M. tuberculosis complex (MTBC) and non-tuberculous mycobacteria (NTM), detect drug resistance, and further guide treatment options. RESULTS: We developed GenoMycAnalyzer, a web-based software that integrates functions for identifying MTBC and NTM species, lineage and spoligotype prediction, variant calling, annotation, drug-resistance determination, and data visualization. The accuracy of GenoMycAnalyzer for genotypic drug susceptibility testing (gDST) was evaluated using 5,473 MTBC isolates that underwent phenotypic DST (pDST). The GenoMycAnalyzer database was built to predict the gDST for 15 antituberculosis drugs using the World Health Organization mutational catalogue. Compared to pDST, the sensitivity of drug susceptibilities by the GenoMycAnalyzer for first-line drugs ranged from 95.9% for rifampicin (95% CI 94.8-96.7%) to 79.6% for pyrazinamide (95% CI 76.9-82.2%), whereas those for second-line drugs ranged from 98.2% for levofloxacin (95% CI 90.1-100.0%) to 74.9% for capreomycin (95% CI 69.3-80.0%). Notably, the integration of large deletions of the four resistance-conferring genes increased gDST sensitivity. The specificity of drug susceptibilities by the GenoMycAnalyzer ranged from 98.7% for amikacin (95% CI 97.8-99.3%) to 79.5% for ethionamide (95% CI 76.4-82.3%). The incorporated Kraken2 software identified 1,284 mycobacterial species with an accuracy of 98.8%. GenoMycAnalyzer also perfectly predicted lineages for 1,935 MTBC and spoligotypes for 54 MTBC. CONCLUSIONS: GenoMycAnalyzer offers both web-based and graphical user interfaces, which can help biologists with limited access to high-performance computing systems or limited bioinformatics skills. By streamlining the interpretation of WGS data, the GenoMycAnalyzer has the potential to significantly impact TB management and contribute to global efforts to combat this infectious disease. GenoMycAnalyzer is available at http://www.mycochase.org .
Assuntos
Mycobacterium tuberculosis , Tuberculose Resistente a Múltiplos Medicamentos , Humanos , Antituberculosos/farmacologia , Antituberculosos/uso terapêutico , Mycobacterium tuberculosis/genética , Testes de Sensibilidade Microbiana , Tuberculose Resistente a Múltiplos Medicamentos/tratamento farmacológico , Micobactérias não Tuberculosas , Resistência a Medicamentos , InternetRESUMO
Compound semiconductors like gallium arsenide (GaAs) provide advantages over silicon for many applications, owing to their direct bandgaps and high electron mobilities. Examples range from efficient photovoltaic devices to radio-frequency electronics and most forms of optoelectronics. However, growing large, high quality wafers of these materials, and intimately integrating them on silicon or amorphous substrates (such as glass or plastic) is expensive, which restricts their use. Here we describe materials and fabrication concepts that address many of these challenges, through the use of films of GaAs or AlGaAs grown in thick, multilayer epitaxial assemblies, then separated from each other and distributed on foreign substrates by printing. This method yields large quantities of high quality semiconductor material capable of device integration in large area formats, in a manner that also allows the wafer to be reused for additional growths. We demonstrate some capabilities of this approach with three different applications: GaAs-based metal semiconductor field effect transistors and logic gates on plates of glass, near-infrared imaging devices on wafers of silicon, and photovoltaic modules on sheets of plastic. These results illustrate the implementation of compound semiconductors such as GaAs in applications whose cost structures, formats, area coverages or modes of use are incompatible with conventional growth or integration strategies.
RESUMO
We evaluated the performance of the BioFire® FilmArray® Pneumonia panel (PN-panel) in detecting bacterial pathogens by comparing it to cultures and to the usefulness of the leukocyte esterase (LE) urine strip test. Between January and June 2022, a total of 67 sputum specimens were obtained from community-acquired pneumonia patients. The PN-panel and LE test were performed simultaneously with conventional cultures. The pathogen detection rates of the PN-panel and culture were 40/67 (59.7%) and 25/67 (37.3%), respectively. The concordance rate between the PN-panel and culture was high (76.9%) when the bacterial burden was high (107 copies/mL), but it was low (8.6%) when it was 104-6 copies/mL, irrespective of the sputum quality. According to the LE positivity, the overall culture positive rate and PN-panel positive rate were significantly higher among the LE-positive specimens (23/45, 31/45) than among the LE-negative specimens (2/21, 8/21). Moreover, the difference in concordance rate between the PN-panel test and culture was significant according to the LE positivity, but not the Gram stain grading. In conclusion, the PN-panel showed high concordance when the bacterial burden was high (107 copies/mL) and ancillary use of LE test will be helpful in interpreting the PN-panel results, especially when the copy number of bacterial pathogens is low.
RESUMO
Charge transport layers have been found to be crucial for high-performance perovskite solar cells (PSCs). SnO2 has been extensively investigated as an alternative material for the traditional TiO2 electron transport layer (ETL). The challenges facing the successful application of SnO2 ETLs are degradation during the high-temperature process and voltage loss due to the lower conduction band. To achieve highly efficient PSCs using a SnO2 ETL, low-temperature-processed mesoporous TiO2 (LT m-TiO2) was combined with compact SnO2 to construct a bilayer ETL. The use of LT m-TiO2 can prevent the degradation of SnO2 as well as enlarge the interfacial contacts between the light-absorbing layer and the ETL. SnO2/TiO2 bilayer-based PSCs showed much higher power conversion efficiency than single SnO2 ETL-based PSCs.
RESUMO
SnO2 has attracted significant attention as an electron transport layer (ETL) because of its wide optical bandgap, electron mobility, and transparency. However, the annealing temperature of 180 °C-200 °C, as reported by several studies, for the fabrication of SnO2 ETL limits its application for flexible devices. Herein, we demonstrated that the low-temperature deposition of SnO2 ETL and further surface modification with oxygen plasma enhances its efficiency from 2.3% to 15.30%. Oxygen plasma treatment improves the wettability of the low-temperature processed SnO2 ETL that results in a larger perovskite grain size. Hence, oxygen plasma treatment effectively improves the efficiency of perovskite solar cells at a low temperature and is compatible with flexible applications.
RESUMO
Metal-based transparent top electrodes allow electronic devices to achieve transparency, thereby expanding their application range. Silver nanowire (AgNW)-based transparent electrodes can function as transparent top electrodes, owing to their excellent conductivity and transmittance. However, they require a high-temperature drying process, which damages the bottom functional layers. Here, we fabricated two types of AgNW-based electrodes using the following three drying methods: thermal, room-temperature, and vacuum. Thereafter, we investigated the variation in their morphological, electrical, and optical characteristics as a function of the drying method and duration. When the AgNW-exposed electrode was dried at room temperature, it exhibited a high surface roughness and low conductivity, owing to the slow solvent evaporation. However, under vacuum, it exhibited a similar electrical conductivity to that achieved by thermal drying because of the decreased solvent boiling point and fast solvent evaporation. Conversely, the AgNW-embedded electrodes exhibited similar roughness values and electrical conductivities regardless of the drying method applied. This was because the polymer shrinkage during the AgNW embedding process generated capillary force and improved the interconnectivity between the nanowires. The AgNW-based electrodes exhibited similar optical properties regardless of the drying method and electrode type. This study reveals that vacuum drying can afford transparent top electrodes without damaging functional layers.
RESUMO
A biosynthetic pathway for poly(3-hydroxybutyrate) [P(3HB)] was developed in Escherichia coli and Corynebacterium glutamicum by an acetoacetyl-coenzyme A (CoA) synthase (AACS) recently isolated from terpenoid-producing Streptomyces sp. strain CL190. Expression of AACS led to significant productions of P(3HB) in E. coli (10.5 wt %) and C. glutamicum (19.7 wt %).
Assuntos
Coenzima A Ligases/genética , Corynebacterium glutamicum/genética , Corynebacterium glutamicum/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Hidroxibutiratos/metabolismo , Poliésteres/metabolismo , Acil Coenzima A/biossíntese , Biocatálise , Coenzima A Ligases/metabolismo , Expressão Gênica , Streptomyces/enzimologiaRESUMO
Electron beam (EB) curing is a foldable hard coating process and has attracted significant research attention in the field of flexible electronic devices. In this study, we report a method for enhancing material surface hardness with low-energy EB curing in a short time. The low-energy EB improved the coating hardness of films by inducing cross-linking polymerization of the silicon-containing monomer. The hardness of the cured coating layer was measured as 3 H using a pencil hardness tester, and the transparency of the coating was higher than 90%. Owing to a series of cross-linking reactions between Si-O-C and Si-OH groups under EB curing and the formation of Si-Si bonds, the cured layer exhibited remarkable durability in the 100000-flexible cycle test. Additionally, the natural oxidation of the C-O groups on the surface of the coating formed carboxyl groups that improved the hydrophilic properties of the coating layer. To the best of our knowledge, this is the first study to propose that the hardness of polyethylene terephthalate films can be improved using low-energy EBs to rapidly cure silicon-containing coatings. Our results provide a novel and commercially viable approach for improving the hardness of touch screens and foldable displays.
RESUMO
Various physical structures have improved light-harvesting and power-conversion efficiency in organic photovoltaic devices, and optical simulations have supported the improvement of device characteristics. Herein, we experimentally investigated how microlens arrays manipulate light propagation in microlens films and material stacks for organic photovoltaics to understand the influence of the constituent materials and sizes of the microlens. As materials to fabricate a microlens array, poly(dimethylsiloxane) and Norland Optical Adhesive 63 were adopted. The poly(dimethylsiloxane) microlens array exhibited higher total transmittance and higher diffuse transmittance, further enhancing the effective optical path and light extinction in material stacks for organic photovoltaics. This resulted in more current generation in an organic photovoltaic device with a poly(dimethylsiloxane) microlens array than in a Norland Optical Adhesive 63 microlens array. The sizes of the microlenses were controlled from 0.5 to 10 µm. The optical characteristics of microlens array films and material stacks with microlenses generally increased with size of the microlens, leading to a 10.6% and 16.0% improvement in the light extinction and power-conversion efficiency, respectively. In addition, electron and current generation in material stacks for organic photovoltaics were calculated from light extinction. The theoretical current generation matched well with experimental values derived from organic photovoltaic devices. Thus, the optical characterization of physical structures helps to predict how much more current can be generated in organic photovoltaic cells with a certain physical structure; it can also be used for screening the physical structures of organic photovoltaic cells.
RESUMO
Infectious diseases and the deaths caused due to contact with germ-contaminated surfaces are severe problems worldwide. Antibacterial materials based on silver nanowires (AgNWs) have a structural advantage when addressing this issue; this is because agglomeration is minimized when nanowires are fabricated into a film. Therefore, employing AgNWs for antimicrobial applications has garnered continuous interest, and increased research for further improvements has been observed. In this study, a AgNW film was fabricated onto glass by spin-coating and then subjected to surface irradiation up to a dose of 1200 kGy, using a low-energy electron beam (e-beam). This "e-beam" irradiation changed the surface morphology and chemical composition; consequently, this improved the performance of the film. The generation of a silver oxide (Ag2O and AgO) outer layer was identified over the AgNWs by X-ray photoelectron spectroscopy (XPS). The antibacterial test corresponding to a contact time of 1 h revealed that the e-beam irradiation increased the antibacterial activity in the log reduction from 1.2 to 1.4 for Staphylococcus aureus and from 1.5 to 3.7 for Escherichia coli. Based on the experimental results and the known antibacterial mechanisms of silver (Ag) nanospecies, we discuss the method by which the antibacterial performance of the AgNW film was improved via the e-beam irradiation. This work provides a simple and swift method to functionally enhance the AgNW antibacterial film via e-beam irradiation.
RESUMO
Silver nanomaterials (AgNMs) have been applied as antibacterial agents to combat bacterial infections that can cause disease and death. The antibacterial activity of AgNMs can be improved by increasing the specific surface area, so significant efforts have been devoted to developing various bottom-up synthesis methods to control the size and shape of the particles. Herein, we report on a facile heat-treatment method that can improve the antibacterial activity of transparent silver nanowire (AgNW) films in a size-controllable, top-down manner. AgNW films were fabricated via spin-coating and were then heated at different temperatures (230 and 280 °C) for 30 min. The morphology and the degree of oxidation of the as-fabricated AgNW film were remarkably sensitive to the heat-treatment temperature, while the transparency was insensitive. As the heat-treatment temperature increased, the AgNWs spontaneously broke into more discrete wires and droplets, and oxidation proceeded faster. The increase in the heat-treatment temperature further increased the antibacterial activity of the AgNW film, and the heat treatment at 280 °C improved the antibacterial activity from 31.7% to 94.7% for Staphylococcus aureus, and from 57.0% to 98.7% for Escherichia coli. Following commonly accepted antibacterial mechanisms of AgNMs, we present a correlation between the antibacterial activity and surface observations of the AgNW film.
RESUMO
A major problem in the application of mesoporous TiO2 as an electron transport layer for flexible perovskite solar cells is that a high-temperature sintering process is required to remove organic additives from the TiO2 layer. A facile oxygen plasma process is herein demonstrated to fabricate mesoporous-structured perovskite solar cells with significant photovoltaic performance at low temperatures. When the low-temperature processed TiO2 layer is modified via oxygen plasma, the organic additives in the TiO2 layer that hinder the charge transport process are successfully decomposed. The oxygen plasma treatment improves the wettability and infiltration of the perovskite layer and also passivates the oxygen vacancy related traps in TiO2. Hence, the oxygen plasma treatment evidently enhances charge extraction and transport, thereby improving photovoltaic performance and decreasing hysteresis.
RESUMO
Wrinkles attract significant attention due to their ability to enhance the mechanical and optical characteristics of various optoelectronic devices. We report the effect of the plasma gas type, power, flow rate, and treatment time on the wrinkle features. When an optical adhesive was treated using a low-pressure plasma of oxygen, argon, and nitrogen, the oxygen and argon plasma generated wrinkles with the lowest and highest wavelengths, respectively. The increase in the power of the nitrogen and oxygen plasma increased the wavelengths and heights of the wrinkles; however, the increase in the power of the argon plasma increased the wavelengths and decreased the heights of the wrinkles. Argon molecules are heavier and smaller than nitrogen and oxygen molecules that have similar weights and sizes; moreover, the argon plasma comprises positive ions while the oxygen and nitrogen plasma comprise negative ions. This resulted in differences in the wrinkle features. It was concluded that a combination of different plasma gases could achieve exclusive control over either the wavelength or the height and allow a thorough analysis of the correlation between the wrinkle features and the characteristics of the electronic devices.
RESUMO
Despite their excellent electrical and optical properties, Ag nanowires (NWs) suffer from oxidation when exposed to air for several days. In this study, we synthesized a Cs carbonate-incorporated overcoating layer by spin-coating and ultraviolet curing to prevent the thermal oxidation of Ag NWs. Cs incorporation increased the decomposition temperature of the overcoating layer, thus enhancing its thermal resistance. The effects of the Cs carbonate-incorporated overcoating layer on the optoelectrical properties and stability of Ag NWs were investigated in detail. The Ag NW electrode reinforced with the Cs carbonate-incorporated overcoating layer exhibited excellent thermal oxidation stability after exposure to air for 55 days at 85 °C and a relative humidity of 85%. The novel overcoating layer synthesized in this study is a promising passivation layer for Ag NWs against thermal oxidation under ambient conditions. This overcoating layer can be applied in large-area optoelectronic devices based on Ag NW electrodes.
RESUMO
To combat infectious diseases, zinc oxide (ZnO) has been identified as an effective antibacterial agent; however, its performance can be adversely affected by harsh application environments. The ozone impact on ZnO antibacterial film needs to be evaluated prior to its application in an ozone disinfection system. In this study, ZnO films synthesized via sol-gel/spin-coating were subjected to ultraviolet-ozone (UVO) treatment for different periods. Surface investigations using scanning electron microscopy, ultraviolet-visible spectroscopy, and X-ray photoelectron spectroscopy revealed that the treatment-induced film changes. With longer UVO treatment, the surface porosity of the film gradually increased from 5% to 30%, causing the transmittance reduction and absorbance increase in visible-light range. Phase transformation of Zn(OH)2 to ZnO occurred during the first 10 min of UVO treatment, followed by oxygen uptake as a consequence of the reaction with reactive oxygen species generated during UVO treatment. However, despite these surface changes, the satisfactory antibacterial activity of the synthesized ZnO film against Staphylococcus aureus and Escherichia coli was sustained even after 120 min of UVO treatment. This indicates that the UVO-induced surface changes do not have a significant effect on the antibacterial performance and that the ZnO sol-gel film possesses good functional durability in ozone environments.
RESUMO
The mesoporous TiO2 nanoparticle-based scaffold structure is the best electron transport layer (ETL) for perovskite solar cells (PSCs) and is still used in most PSCs with optimal photovoltaic characteristics. However, the high sintering temperature of TiO2 nanoparticles required to remove binders from the TiO2 paste limits PSC application to flexible electronics. In this study, a simple interface modification process involving ethanol rinsing is developed to enhance the photovoltaic characteristics of low-temperature processed PSCs. This easy and fast technique could enable remarkable performance by PSCs by significantly increasing the fill factor and current density, leading to a power conversion efficiency more than four times that of untreated solar cells.
RESUMO
We investigated the effect of different spray-coating parameters on the electro-optical properties of Ag nanowires (NWs). Highly transparent and conductive Ag NWâ»graphene oxide (GO) hybrid electrodes were fabricated by using the spray-coating technique. The Ag NW percolation network was modified with GO and this led to a reduced sheet resistance of the Ag NWâ»GO electrode as the result of a decrease in the inter-nanowire contact resistance. Although electrical conductivity and optical transmittance of the Ag NW electrodes have a trade-off relationship, Ag NWâ»GO hybrid electrodes exhibited significantly improved sheet resistance and slightly decreased transmittance compared to Ag NW electrodes. Ag NWâ»GO hybrid electrodes were integrated into smart windows based on polymer-dispersed liquid crystals (PDLCs) for the first time. Experimental results showed that the electro-optical properties of the PDLCs based on Ag NWâ»GO electrodes were superior when compared to those of PDLCs based on only Ag NW electrodes. This study revealed that the hybrid Ag NWâ»GO electrode is a promising material for manufacturing the large-area flexible indium tin oxide (ITO)-free PDLCs.
RESUMO
In our previous study, a system for producing poly(3-hydroxybutyrate) [P(3HB)] was established by introducing a polyhydroxyalkanoate (PHA) biosynthetic gene operon (phaCAB Re) derived from Ralstonia eutropha into Corynebacterium glutamicum. In this study, two experimental strategies have been applied to improve P(3HB) production in recombinant C. glutamicum. One is a codon optimization of the N-terminal-coding region of the PHA synthase (PhaC Re) gene focusing on the codon usage preference for the translation system of C. glutamicum. The other is the replacement of wild-type phaC Re with a modified gene encoding a mutation of Gly4Asp (G4D), which enhanced the production of PhaC Re and P(3HB) in Escherichia coli. The introduction of these engineered PHA synthase genes into C. glutamicum enhanced the production of PhaC(Re) and P(3HB). Interestingly, we found that these gene modifications also caused increases in the concentration of the translation products of the genes encoding monomer-supplying enzymes, beta-ketothiolase (PhaA Re) and acetoacetyl-CoA reductase (PhaB Re). This finding prompted us to carry out a gene dosage of phaAB Re for a double plasmid system, and the highest production (52.5 wt%) of P(3HB) was finally achieved by combining the gene dosage of phaAB Re with codon optimization. The molecular weight of P(3HB) was also increased by approximately 2-fold, as was P(3HB) content. Microscopic observation revealed that the volume of the cells accumulating P(3HB) was increased by more than 4-fold compared with the non-P(3HB)-accumulating cells without filamentous morphologenesis observed in E. coli.
Assuntos
Códon/genética , Corynebacterium glutamicum/fisiologia , Dosagem de Genes/genética , Melhoramento Genético/métodos , Hidroxibutiratos/metabolismo , Poliésteres/metabolismo , Engenharia de Proteínas/métodos , Proteínas Recombinantes/metabolismo , Mutagênese Sítio-DirigidaRESUMO
To improve the electrical properties of silver nanowire (Ag NW) transparent conductive electrodes (TCEs), the density of Ag NW networks should be increased, to increase the number of percolation paths. However, because of the inverse relationship between optical transmittance and electrical resistivity, the optical properties of Ag NW TCEs deteriorate with increasing density of the Ag NW network. In this study, a hybrid Ag NW electrode composed of randomly oriented and grid-patterned Ag NW networks is demonstrated. The hybrid Ag NW electrodes exhibit significantly improved sheet resistances and slightly decreased transmittances compared to randomly oriented Ag NW networks. Hybrid Ag NW TCEs show excellent mechanical flexibilities and durabilities in bending tests with a 5 mm radius of curvature. Moreover, flexible transparent film heaters (TFHs) based on the hybrid Ag NW electrodes show elevated maximum temperatures relative to TFHs based on randomly oriented Ag NW electrodes, when operated at the same input voltages.
RESUMO
Increasing interests in stretchable electronic devices have resulted in vigorous research activities, most of which are focused on structural configurations. Diverse structural configurations are available for stretchability, including stiff-island, serpentine, and buckled structures. With easily deformable shapes and simple fabrication processes, buckled structures have the potential to realize stretchability. However, conventional buckled structures exhibit stretchability only in a single-axis direction. In the present study, a new type of cross-buckled structure, which can overcome the limitations of conventional buckled structures is developed. The stretchable thin film solar cells with the cross-buckled structure showed stable mechanical and electrical characteristics under both stretching and compressing conditions. The cross-buckled structure for stretchable electronic devices is expected to broaden the fields of wearable electronics, stretchable displays, and biocompatible applications.