A multifunctional N-GO/PtCo nanocomposite bridged carbon fiber interface for the electrochemical aptasensing of CA15-3 oncomarker.

The development of integrated analytical devices is crucial for advancing next-generation point-of-care platforms. Herein, we describe a facile synthesis of a strongly catalytic and durable Nitrogen-doped graphene oxide decorated platinum cobalt (NGO-PtCo) nanocomposite that is conjugated with target-specific DNA aptamer (i-e. MUC1) and grown on carbon fiber. Benefitting from the combined features of the high electrochemical surface area of N-doped GO, high capacitance and stabilization by Co, and high kinetic performance by Pt, a robust, multifunctional, and flexible nanotransducer surface was created. The designed platform was applied for the specific detection of a blood-based oncomarker, CA15-3. The electrochemical characterization proved that nanosurface provides a highly conductive and proficient immobilization support with a strong bio-affinity towards MUC1 aptamer. The specific interaction between CA15-3 and the aptamer alters the surface properties of the aptasensor and the electroactive signal probe generated a remarkable increase in signal intensity. The sensor exhibited a wide dynamic range of 5.0 × 10-2 -200 U mL-1, a low limit of detection (LOD) of 4.1 × 10-2 U mL-1, and good reproducibility. The analysis of spiked serum samples revealed outstanding recoveries of up to 100.03 %, by the proposed aptasensor. The aptasensor design opens new revelations in the reliable detection of tumor biomarkers for timely cancer diagnosis.

Covalent organic frameworks (COFs) as carrier for improved drug delivery and biosensing applications.

Porous organic frameworks (POFs) represent a significant subclass of nanoporous materials in the field of materials science, offering exceptional characteristics for advanced applications. Covalent organic frameworks (COFs), as a novel and intriguing type of porous material, have garnered considerable attention due to their unique design capabilities, diverse nature, and wide-ranging applications. The unique structural features of COFs, such as high surface area, tuneable pore size, and chemical stability, render them highly attractive for various applications, including targeted and controlled drug release, as well as improving the sensitivity and selectivity of electrochemical biosensors. Therefore, it is crucial to comprehend the methods employed in creating COFs with specific properties that can be effectively utilized in biomedical applications. To address this indispensable fact, this review paper commences with a concise summary of the different methods and classifications utilized in synthesizing COFs. Second, it highlights the recent advancements in COFs for drug delivery, including drug carriers as well as the classification of drug delivery systems and biosensing, encompassing drugs, biomacromolecules, small biomolecules and the detection of biomarkers. While exploring the potential of COFs in the biomedical field, it is important to acknowledge the limitations that researchers may encounter, which could impact the practicality of their applications. Third, this paper concludes with a thought-provoking discussion that thoroughly addresses the challenges and opportunities associated with leveraging COFs for biomedical applications. This review paper aims to contribute to the scientific community's understanding of the immense potential of COFs in improving drug delivery systems and enhancing the performance of biosensors in biomedical applications.

Microbial fuel cells a state-of-the-art technology for wastewater treatment and bioelectricity generation.

Wastewater treatment and electricity generation have been the major concerns for the last few years. The scarcity of fossil fuels has led to the development of unconventional energy resources that are pollution-free. Microbial fuel cell (MFC) is an environmental and eco-friendly technology that harvests energy through the oxidation of organic substrates and transform into the electric current with the aid of microorganisms as catalysts. This review presents power output and colour removal values by designing various configurations of MFCs and highlights the importance of materials for the fabrication of anode and cathode electrodes playing vital roles in the formation of biofilm and redox reactions taking place in both chambers. The electron transfer mechanism from microbes towards the electrode surface and the generation of electric current are also highlighted. The effect of various parameters affecting the cell performance such as type and amount of substrate, pH and temperature maintained within the chambers have also been discussed. Although this technology presents many advantages, it still needs to be used in combination with other processes to enhance power output.

Green synthesis and biological evaluation of novel 5-fluorouracil derivatives as potent anticancer agents.

This study reports the formation of 5-FU co-crystals with four different pharmacologically safe co-formers; Urea, Thiourea, Acetanilide and Aspirin using methanol as a solvent. Two fabrication schemes were followed i.e., solid-state grinding protocol, in which API and co-formers were mixed through vigorous grinding while in the other method separate solutions of both the components were made and mixed together. The adopted approaches offer easy fabrication protocols, no temperature maintenance requirements, no need of expensive solvents, hardly available apparatus, isolation and purification of the desired products. In addition, there is no byproducts formation, In fact, a phenomenon embracing the requirements of green synthesis. Through FTIR analysis; for API the N-H absorption frequency was recorded at 3409.02 cm-1 and that of -C[bond, double bond]O was observed at 1647.77 cm-1. These characteristics peaks of 5-FU were significantly shifted and recorded at 3499.40 cm-1 and 1649.62 cm-1 for 5-FU-Ac (3B) and 3496.39 cm-1 and 1659.30 cm-1 for 5-FU-As (4B) co-crystals for N-H and -C[bond, double bond]O groups respectively. The structural differences between API and co-crystals were further confirmed through PXRD analysis. The characteristic peak of 5-FU at 2θ = 28.79918o was significantly shifted in the graphs of co-crystals not only in position but also with respect to intensity and FWHM values. In addition, new peaks were also recorded in all the spectra of co-formers confirming the structural differences between API and co-formers. In addition, percent growth inhibition was also observed by all the co-crystals through MTT assay against HCT 116 colorectal cell lines in vitro. At four different concentrations; 25, 50, 100 and 200 µg/mL, slightly different trends of the effectiveness of API and co-crystals were observed. However; among all the co-crystal forms, 5-FU-thiourea co-crystals obtained through solution method (2B) proved to be the most effective growth inhibitor at all the four above mentioned concentrations.

Pathological effects of feeding aflatoxin-contaminated feed on immune status and reproductive performance of juvenile white leghorn males and its mitigation with ∝-tocopherol and Moringa oleifera.

This study was planned to detect the adverse pathological consequences of aflatoxin B1 in White Leghorn (WLH) layer breeder males. Eight-week-old male layer cockerels were separated into six experimental categories: A group was kept as negative control, offered with normal feed only; group B was fed with 400 ppb amount of aflatoxin, while groups F and D fed with normal feed and supplemented with vitamin E 100 ppm and 1% Moringa oleifera, respectively, whereas groups E and C were fed with 400 ppb aflatoxin containing feed and ameliorated with vitamin E 100 ppm and 1% Moringa oleifera, respectively. This study was continued for 2 months and immunologic disorders and reproductive parameters were observed during the trial. To find out immunological status lymphoproliferative response to phytohemagglutinin-P (PHA-P), antibody titers against sheep red blood cells (SRBCs) and carbon clear assay were performed by collecting samples from five birds from each group. The whole data was measured by ANOVA test, and group means were compared by DMR test by using M-Stat C software. Regarding the reproductive status, spermatogenesis, blood testosterone level, testes weight, testes histology, sperm motility, and morphology were negatively affected by aflatoxins, but these deviations positively ameliorated by vitamin E and Moringa. Vitamin E and Moringa found advantageous in boosting the immune status of affected bird. All the immunological parameters including antibody titers against sheed red blood cells, lymphoproliferative response to avian tuberculin and phagocytic potential of macrophages were suppressed by AFB1 however in control, Moringa and vitamin E groups these immunological responses were significantly higher.

Synthesis, Characterization, Theoretical and Experimental Anticancer Evaluation of Novel Cocrystals of 5-Fluorouracil and Schiff Bases against SW480 Colorectal Carcinoma.

The chemotherapeutic agent known as 5-fluorouracil (5-FU) is an artificial fluoropyrimidine antimetabolite that has been widely used for its antineoplastic properties. Cocrystals of 5-fluorouracil (5-FU) with five different Schiff bases (benzylidene-urea (BU), benzylidene-aniline (BA), salicylidene-aniline (SA), salicylidene-phenylhydrazine (SPH), and para-hydroxy benzylideneaniline (HBA)) are reported in this study. The newly synthesized cocrystals were analyzed by FTIR and PXRD. In this study, we investigated the antitumor efficacy of 5-FU derivatives in SW480 colon cancer cells via MTT assay at varying dose concentrations. Molecular docking was performed to predict the binding mechanism of TS with various 5-FU complexes. FTIR revealed the presence of respective functional groups in the prepared cocrystals. The frequencies (v) of N-H (3220.24 cm-1) and carbonyl groups (1662.38 cm-1) in the spectrum of 5-FU shifted considerably in all derivative cocrystal new interactions. There was a noticeable transformation in the PXRD peak of 5-FU at 2θ = 28.37° in all derivatives. The novelty of the present study lies in the fact that 5-FU-BA showed an anticancer potential IC50 (6.4731) far higher than that of 5-FU (12.116), almost comparable to that of the reference drug doxorubicin (3.3159), against SW480 cancel cell lines, followed by 5-Fu-HBA (10.2174). The inhibition rates of 5-FU-BA and 5-FU-HBA were highest among the derivatives (99.85% and 99.37%, respectively) in comparison with doxorubicin (97.103%). The results revealed that the synthesized 5-FU cocrystals have promising antitumor efficacy compared with previously reported 5-FU and 5-FU. The activities of the cocrystals were rationalized by a molecular modeling approach to envisage binding modes with the target cancer protein.

Risk Assessment of Hepatocellular Carcinoma with Aflatoxin B1 Exposure in Edible Oils.

Contamination of edible oils with aflatoxins (AFs) is a universal issue due to the detrimental effects of aflatoxins on human health and the fact that edible oils are a major source of fungal growth, particularly storage fungi (Aspergillus sp.). The objective of this study was to assess aflatoxin B1 (AFB1) in edible oil used in fried food in order to determine the risk of cancer from AFB1 exposure through cooked food using the FAO/WHO's and EFSA's margin of exposure (MOE) quantitative liver cancer risk approaches. Using Mycosep 226 columns and HPLC-FLD, 100 samples of cooking oils (soybean, canola, and sunflower oil) from different food points were analyzed for contamination with aflatoxins. Of all the samples tested, 89% were positive for total aflatoxins and AFB1, with 65% indicating AF concentrations beyond permitted levels. Canola oil was found to contain higher levels of AFB1 and AFs than soybean and sunflower oil. Almost 71 percent of canola oil samples (range of 54.4-281.1 µg/kg) were contaminated with AF levels higher than the proposed limits of the European Union (20 µg/kg). The consumption of canola oil samples used in fried foods had MOE values that were significantly lower as compared to sunflower and soybean oils, indicating that risk reduction is feasible. Additionally, compared to soybean and sunflower oil, canola oil exhibited a greater threat of liver cancer cases linked to AFB1 exposure (17.13 per 100,000 males over 35 and 10.93 per 100,000 females over 35). Using a quantitative liver cancer approach, health risk valuation demonstrated that males and females over the age of 35 are at significant risk of developing liver cancer. The health risk assessment exposed that the males and female over the age of 35 are at considerable risk of liver cancer by using a quantitative liver cancer approach. The innovation of this study lies in the fact that no such study is reported related to liver cancer risk evaluation accompanied with AFB1 exposure from consumed edible oil. As a result, a national strategy must be developed to solve this problem so that edible oil products are subjected to severe regulatory examination.

Linear and crosslinked Polyurethanes based catalysts for reduction of methylene blue.

The large amount of synthetic dyes in effluents is a serious concern to be addressed. The chemical reduction is one of the potential way to resolve this problem. In this study, linear and crosslinked polyurethanes i.e. LPUR & CLPUR were synthesized from toluene diisocyanate (TDI), polyethylene glycol (PEG;1000g/mole) and tetraethylenepentamine (TEPA). The structure and morphology of synthesized materials were examined by FTIR, SEM and BET. The CLPUR was found stable in aqueous system with 0.80g/cm3 density and 16.4998m2g-1 surface area. These materials were applied for the reduction of methylene blue in presence of NaBH4. Both, polymers catalyzed the process and showed 100% reduction in 16 and 28mins., respectively, while, the reduction rate was significantly low in absence of these materials, even after 120mins. Furthermore, negligible adsorption was observed with only 7% removal of dye. The best reduction rates were observed at low concentration of dye, increasing concentration of NaBH4 and with more dosage of polymeric catalyst. The kinetic study of process followed zero order kinetics. It was hence concluded that both synthesized polymers played a catalytic role in reduction process. However, stability in aqueous system and better efficiency in reduction process endorsed CLPUR as an optimal choice for further studies.