In Situ Mesopore Formation in SiOx Nanoparticles by Chemically Reinforced Heterointerface and Use of Chemical Prelithiation for Highly Reversible Lithium-Ion Battery Anode.

SiOx is a promising next-generation anode material for lithium-ion batteries. However, its commercial adoption faces challenges such as low electrical conductivity, large volume expansion during cycling, and low initial Coulombic efficiency. Herein, to overcome these limitations, an eco-friendly in situ methodology for synthesizing carbon-containing mesoporous SiOx nanoparticles wrapped in another carbon layers is developed. The chemical reactions of vinyl-terminated silanes are designed to be confined inside the cationic surfactant-derived emulsion droplets. The polyvinylpyrrolidone-based chemical functionalization of organically modified SiO2 nanoparticles leads to excellent dispersion stability and allows for intact hybridization with graphene oxide sheets. The formation of a chemically reinforced heterointerface enables the spontaneous generation of mesopores inside the thermally reduced SiOx nanoparticles. The resulting mesoporous SiOx -based nanocomposite anodes exhibit superior cycling stability (≈100% after 500 cycles at 0.5 A g-1 ) and rate capability (554 mAh g-1 at 2 A g-1 ), elucidating characteristic synergetic effects in mesoporous SiOx -based nanocomposite anodes. The practical commercialization potential with a significant enhancement in initial Coulombic efficiency through a chemical prelithiation reaction is also presented. The full cell employing the prelithiated anode demonstrated more than 2 times higher Coulombic efficiency and discharge capacity compared to the full cell with a pristine anode.

Nano/Microstructured Silicon-Carbon Hybrid Composite Particles Fabricated with Corn Starch Biowaste as Anode Materials for Li-Ion Batteries.

Silicon has a great potential as an alternative to graphite which is currently used commercially as an anode material in lithium-ion batteries (LIBs) because of its exceptional capacity and reasonable working potential. Herein, a low-cost and scalable approach is proposed for the production of high-performance silicon-carbon (Si-C) hybrid composite anodes for high-energy LIBs. The Si-C composite material is synthesized using a scalable microemulsion method by selecting silicon nanoparticles, using low-cost corn starch as a biomass precursor and finally conducting heat treatment under C3H6 gas. This produces a unique nano/microstructured Si-C hybrid composite comprised of silicon nanoparticles embedded in micron-sized amorphous carbon balls derived from corn starch that is capsuled by thin graphitic carbon layer. Such a dual carbon matrix tightly surrounds the silicon nanoparticles that provides high electronic conductivity and significantly decreases the absolute stress/strain of the material during multiple lithiation-delithiation processes. The Si-C hybrid composite anode demonstrates a high capacity of 1800 mAh g-1, outstanding cycling stability with capacity retention of 80% over 500 cycles, and fast charge-discharge capability of 12 min. Moreover, the Si-C composite anode exhibits good acceptability in practical LIBs assembled with commercial Li[Ni0.6Co0.2Mn0.2]O2 and Li[Ni0.80Co0.15Al0.05]O2 cathodes.

Superionic Halogen-Rich Li-Argyrodites Using In Situ Nanocrystal Nucleation and Rapid Crystal Growth.

Although several crystalline materials have been developed as Li-ion conductors for use as solid electrolytes in all-solid-state batteries (ASSBs), producing materials with high Li-ion conductivities is time-consuming and cost-intensive. Herein, we introduce a superionic halogen-rich Li-argyrodite (HRLA) and demonstrate its innovative synthesis using ultimate-energy mechanical alloying (UMA) and rapid thermal annealing (RTA). UMA with a 49 G-force milling energy provides a one-pot process that includes mixing, glassification, and crystallization, to produce as-milled HRLA powder that is ∼70% crystallized; subsequent RTA using an infrared lamp increases this crystallinity to ∼82% within 25 min. Surprisingly, this HRLA exhibits the highest Li-ion conductivity among Li-argyrodites (10.2 mS cm-1 at 25 °C, cold-pressed powder compact) reported so far. Furthermore, we confirm that this superionic HRLA works well as a promising solid electrolyte without a decreased intrinsic electrochemical window in various electrode configurations and delivers impressive cell performance (114.2 mAh g-1 at 0.5 C).

Self-Rearrangement of Silicon Nanoparticles Embedded in Micro-Carbon Sphere Framework for High-Energy and Long-Life Lithium-Ion Batteries.

Despite its highest theoretical capacity, the practical applications of the silicon anode are still limited by severe capacity fading, which is due to pulverization of the Si particles through volume change during charge and discharge. In this study, silicon nanoparticles are embedded in micron-sized porous carbon spheres (Si-MCS) via a facile hydrothermal process in order to provide a stiff carbon framework that functions as a cage to hold the pulverized silicon pieces. The carbon framework subsequently allows these silicon pieces to rearrange themselves in restricted domains within the sphere. Unlike current carbon coating methods, the Si-MCS electrode is immune to delamination. Hence, it demonstrates unprecedented excellent cyclability (capacity retention: 93.5% after 500 cycles at 0.8 A g-1), high rate capability (with a specific capacity of 880 mAh g-1 at the high discharge current density of 40 A g-1), and high volumetric capacity (814.8 mAh cm-3) on account of increased tap density. The lithium-ion battery using the new Si-MCS anode and commercial LiNi0.6Co0.2Mn0.2O2 cathode shows a high specific energy density above 300 Wh kg-1, which is considerably higher than that of commercial graphite anodes.

Study on the Catalytic Activity of Noble Metal Nanoparticles on Reduced Graphene Oxide for Oxygen Evolution Reactions in Lithium-Air Batteries.

Among many challenges present in Li-air batteries, one of the main reasons of low efficiency is the high charge overpotential due to the slow oxygen evolution reaction (OER). Here, we present systematic evaluation of Pt, Pd, and Ru nanoparticles supported on rGO as OER electrocatalysts in Li-air cell cathodes with LiCF3SO3-tetra(ethylene glycol) dimethyl ether (TEGDME) salt-electrolyte system. All of the noble metals explored could lower the charge overpotentials, and among them, Ru-rGO hybrids exhibited the most stable cycling performance and the lowest charge overpotentials. Role of Ru nanoparticles in boosting oxidation kinetics of the discharge products were investigated. Apparent behavior of Ru nanoparticles was different from the conventional electrocatalysts that lower activation barrier through electron transfer, because the major contribution of Ru nanoparticles in lowering charge overpotential is to control the nature of the discharge products. Ru nanoparticles facilitated thin film-like or nanoparticulate Li2O2 formation during oxygen reduction reaction (ORR), which decomposes at lower potentials during charge, although the conventional role as electrocatalysts during OER cannot be ruled out. Pt-and Pd-rGO hybrids showed fluctuating potential profiles during the cycling. Although Pt- and Pd-rGO decomposed the electrolyte after electrochemical cycling, no electrolyte instability was observed with Ru-rGO hybrids. This study provides the possibility of screening selective electrocatalysts for Li-air cells while maintaining electrolyte stability.

Influence of temperature on lithium-oxygen battery behavior.

In this Letter we report an electrochemical and morphological study of the response of lithium-oxygen cells cycled at various temperatures, that is, ranging from -10 to 70 °C. The results show that the electrochemical process of the cells is thermally influenced in an opposite way, that is, by a rate decrease, due to a reduced diffusion of the lithium ions from the electrolyte to the electrode interface, at low temperature and a rate enhancement, due to the decreased electrolyte viscosity and consequent increased oxygen mobility, at high temperature. In addition, we show that the temperature also influences the crystallinity of lithium peroxide, namely of the product formed during cell discharge.

Overcoming Chemical and Mechanical Instabilities in Lithium Metal Anodes with Sustainable and Eco-Friendly Artificial SEI Layer.

Construction of a robust artificial solid-electrolyte interphase (SEI) layer has proposed an effective strategy to overcome the instability of the lithium (Li). However, existing artificial SEI layers inadequately controlled ion distribution, leading to dendritic growth and penetration. Furthermore, the environmental impact of the manufacturing process and materials of the artificial layer is often overlooked. In this work, a chemically and physically reinforced membrane (C-Li@P) composed of the biocompatible Li+ coordinated carboxymethyl guar gum (CMGG) and polyacrylamide (PAM) polymers serves as an artificial SEI membrane for dendrite-free Li. This membrane with hollow channels not only directs ion flux along the interspace of fibers, fostering uniform Li plating but also induces a desirable interface chemistry. Consequently, artificial SEI membrane-covered Li exhibits stable electrochemical plating/stripping reactions, surpassing the cycle life of ≈750% of bare Li. It demonstrates exceptional capacity retention of ≈93.9%, ≈88.1%, and ≈79.18% in full cells paired with LiNi0.8Mn0.1Co0.1O2 (NMC811), LiNi0.6Mn0.2Co0.2O2 (NMC622) and S cathodes, respectively over 200 cycles at 1 C rate. Additionally, the water-based green manufacturing and biodegradability of the membrane demonstrated the sustainable development and disposal of electrodes. This work provides a comprehensive framework for the design of an artificial layer chemically and physically regulating dendritic growth.

Impact of Transition Metal Layer Vacancy on the Structure and Performance of P2 Type Layered Sodium Cathode Material.

This study explores the impact of introducing vacancy in the transition metal layer of rationally designed Na0.6[Ni0.3Ru0.3Mn0.4]O2 (NRM) cathode material. The incorporation of Ru, Ni, and vacancy enhances the structural stability during extensive cycling, increases the operation voltage, and induces a capacity increase while also activating oxygen redox, respectively, in Na0.7[Ni0.2VNi0.1Ru0.3Mn0.4]O2 (V-NRM) compound. Various analytical techniques including transmission electron microscopy, X-ray absorption near edge spectroscopy, operando X-ray diffraction, and operando differential electrochemical mass spectrometry are employed to assess changes in the average oxidation states and structural distortions. The results demonstrate that V-NRM exhibits higher capacity than NRM and maintains a moderate capacity retention of 81% after 100 cycles. Furthermore, the formation of additional lone-pair electrons in the O 2p orbital enables V-NRM to utilize more capacity from the oxygen redox validated by density functional calculation, leading to a widened dominance of the OP4 phase without releasing O2 gas. These findings offer valuable insights for the design of advanced high-capacity cathode materials with improved performance and sustainability in sodium-ion batteries.

Relaxation of Stress Propagation in Alloying-Type Sn Anodes for K-Ion Batteries.

Alloying-type metallic tin is perceived as a potential anode material for K-ion batteries owing to its high theoretical capacity and reasonable working potential. However, pure Sn still face intractable issues of inferior K+ storage capability owing to the mechanical degradation of electrode against large volume changes and formation of intermediary insulating phases K4 Sn9 and KSn during alloying reaction. Herein, the TiC/C-carbon nanotubes (CNTs) is prepared as an effective buffer matrix and composited with Sn particles (Sn-TiC/C-CNTs) through the high-energy ball-milling method. Owing to the conductive and rigid properties, the TiC/C-CNTs matrix enhances the electrical conductivity as well as mechanical integrity of Sn in the composite material and thus ultimately contributes to performance supremacy in terms of electrochemical K+ storage properties. During potassiation process, the TiC/C-CNTs matrix not only dissipates the internal stress toward random radial orientations within the Sn particle but also provides electrical pathways for the intermediate insulating phases; this tends to reduce microcracking and prevent considerable electrode degradation.

Gold-Nanolayer-Derived Zincophilicity Suppressing Metallic Zinc Dendrites and Its Efficacy in Improving Electrochemical Stability of Aqueous Zinc-Ion Batteries.

Herein, an Au-coating layer adjusted on the surface of a Zn metal electrode that effectively suppresses the dendrite growth as well as the mechanisms underlying the dendrite suppression as a result of the zincophilic character of Au is introduced. For the Au-coated Zn metal symmetric cell, uniform deposition of Zn-derived compounds was revealed by operando synchrotron tomography. Microscopic studies demonstrate that the Au-coating layer is induced to form a new Zn-Au alloy during the initial Zn deposition, resulting in stabilized long-term stripping/plating of Zn via the 'embracing effect' that intimately accommodates Zn deposition for further cycles. This property supports the successful operation of symmetrical cells up to 50 mA cm-2 . According to Zn electrodeposition simulation, it is verified that the suppression of dendrite growth is responsible for the electro-conducting Au nanolayer that uniformly distributes the electric field and protects the Zn electrode from corrosion, ultimately promoting uniform Zn growth. The compatibility of the Au-coating layer for full cell configuration is verified using NaV3 O8 as a cathode material over 1 000 cycles. This finding provides a new pathway for the enhancement of the electrochemical performance of ZIBs by suppressing the dendritic growth of Zn by means of a zincophilic Au nanolayer.

Pore-Free Single-Crystalline Particles for Durable Na-Ion Battery Cathodes.

The O3-type Na[Ni1-x-yCoxMny]O2 cathodes have received significant attention in sodium-ion batteries (SIBs) due to their high energy density. However, challenges such as structural instability and interfacial instability against an electrolyte solution limit their practical use in SIBs. In this study, the single-crystalline O3-type Na[Ni0.6Co0.2Mn0.2]O2 (SC-NCM) cathode has been designed and synthesized to effectively relieve the degradation pathways of the polycrystalline O3-type Na[Ni0.6Co0.2Mn0.2]O2 (PC-NCM) cathode for SIBs. The mechanically robust SC-NCM due to the absence of pores in the particles enhances tolerance to particle cracking, resulting in stable cycling performance with a cycle retention of 73% over 350 cycles. Moreover, the proposed SC-NCM is synthesized using a simple and cost-effective molten-salt synthetic route without the complex quenching process typically associated with PC-NCM synthesis methods, showing good practical applicability. This study will provide an innovative direction for the development of advanced cathode materials for practical SIBs.

Nanostructured high-energy cathode materials for advanced lithium batteries.

Nickel-rich layered lithium transition-metal oxides, LiNi(1-x)M(x)O(2) (M = transition metal), have been under intense investigation as high-energy cathode materials for rechargeable lithium batteries because of their high specific capacity and relatively low cost. However, the commercial deployment of nickel-rich oxides has been severely hindered by their intrinsic poor thermal stability at the fully charged state and insufficient cycle life, especially at elevated temperatures. Here, we report a nickel-rich lithium transition-metal oxide with a very high capacity (215 mA h g(-1)), where the nickel concentration decreases linearly whereas the manganese concentration increases linearly from the centre to the outer layer of each particle. Using this nano-functional full-gradient approach, we are able to harness the high energy density of the nickel-rich core and the high thermal stability and long life of the manganese-rich outer layers. Moreover, the micrometre-size secondary particles of this cathode material are composed of aligned needle-like nanosize primary particles, resulting in a high rate capability. The experimental results suggest that this nano-functional full-gradient cathode material is promising for applications that require high energy, long calendar life and excellent abuse tolerance such as electric vehicles.

A transmission electron microscopy study of the electrochemical process of lithium-oxygen cells.

The electrochemical reaction of a lithium-oxygen cell using a tetraethylene glycol dimethyl ether-lithium triflate, TEGDME-LiCF(3)SO(3) electrolyte, is investigated by a detailed transmission electron microscopy analysis. The results confirm the reversibility of the process by showing the formation-dissolution of lithium peroxide, Li(2)O(2), upon repeating cell charge and discharge cycles.

A metal-free, lithium-ion oxygen battery: a step forward to safety in lithium-air batteries.

A preliminary study of the behavior of lithium-ion-air battery where the common, unsafe lithium metal anode is replaced by a lithiated silicon-carbon composite, is reported. The results, based on X-ray diffraction and galvanostatic charge-discharge analyses, demonstrate the basic reversibility of the electrochemical process of the battery that can be promisingly cycled with a rather high specific capacity.

Anion-Induced Interfacial Liquid Layers on LiCoO2 in Salt-in-Water Lithium-Ion Batteries.

The incompatibility of lithium intercalation electrodes with water has impeded the development of aqueous Li-ion batteries. The key challenge is protons which are generated by water dissociation and deform the electrode structures through intercalation. Distinct from previous approaches utilizing large amounts of electrolyte salts or artificial solid-protective films, we developed liquid-phase protective layers on LiCoO2 (LCO) using a moderate concentration of 0.5∼3 mol kg-1 lithium sulfate. Sulfate ion strengthened the hydrogen-bond network and easily formed ion pairs with Li+, showing strong kosmotropic and hard base characteristics. Our quantum mechanics/molecular mechanics (QM/MM) simulations revealed that sulfate ion paired with Li+ helped stabilize the LCO surface and reduced the density of free water in the interface region below the point of zero charge (PZC) potential. In addition, in situ electrochemical surface-enhanced infrared absorption spectroscopy (SEIRAS) proved the appearance of inner-sphere sulfate complexes above the PZC potential, serving as the protective layers of LCO. The role of anions in stabilizing LCO was correlated with kosmotropic strength (sulfate > nitrate > perchlorate > bistriflimide (TFSI-)) and explained better galvanostatic cyclability in LCO cells.

Resolving the Incomplete Charging Behavior of Redox-Mediated Li-O2 Batteries via Sustainable Protection of Li Metal Anode.

Lithium-oxygen batteries (LOBs) have attracted worldwide attention due to their high specific energy. However, the poor rechargeability and cycling stability of LOBs hinders their practical use in applications. Here, we explore the incomplete charging behavior of redox-mediated LOBs operated at a feasible capacity for a practical level (3.25 mAh cm-2) and resolve it using a sustainable lithium protection strategy. The incomplete charging behavior, promoted by self-discharge of redox mediators (RMs), hampers the reversible cycling of LOBs, which was investigated through multiangle in situ and ex situ analyses. Meanwhile, the proposed lithium protection strategy, introducing an inorganic/organic hybrid artificial composite layer with a preformed stable interface between the lithium metal and the composite layer, enhances the stability of the lithium metal anode during the prolonged cycling by preventing the chemical/electrochemical interactions of RMs on the lithium metal surface, thus improving the overall rechargeability of LOBs. This work provides guidelines for the effective use of RMs with an adequate lithium protection strategy to achieve sustainable cycling of LOBs, creating a feasible approach for the practical use of LOBs with high areal capacity.

Self-Constructed Intimate Interface on a Silicon Anode Enabled by a Phase-Convertible Electrolyte for Lithium-Ion Batteries.

Promising high-capacity anodes of Si-based materials suffer from large volume expansions, thereby limiting their practical applications, especially in combination with safe inorganic solid electrolytes. Here, to achieve a high level of safety by applying Si anodes, we introduced a quasi-solid-state succinonitrile-based electrolyte (QS-SCN) that enables the practical application of the anode with long-term cycling performance. By exploiting the unique phase-convertible property of QS-SCN, the Si electrode was successfully impregnated with the liquid-state electrolyte above its melting temperature, and a simple cooling process was then used to form a quasi-solid-state Li-Si cell. Additionally, through a precycling process, the formation of a stable and rigid solid-electrolyte interphase (SEI) was induced, and the intimate contacts between the QS-SCN and Si particles were preserved. The soft QS-SCN played an important role as a buffer in the large volume expansions while maintaining favorable interface contacts, and the formation of the SEI layers contributed to the reversible lithiation and delithiation in the Si particles. As a result, the quasi-solid-state Li-Si cell fabricated with QS-SCN exhibited significantly improved capacity retention compared with an all-solid-state cell.

Facile Method for the Formation of Intimate Interfaces in Sulfide-Based All-Solid-State Batteries.

Sulfide-based inorganic solid electrolytes have been considered promising candidates for all-solid-state batteries owing to their high ionic conductivity. Compared with oxide-based inorganic solid electrolytes which require high-temperature sintering, the intrinsic deformability of sulfide electrolytes enables the fabrication of all-solid-state batteries by a simple cold pressing method. Nevertheless, the performance of sulfide-based all-solid-state batteries is still unsatisfactory, owing to the insufficient interfacial properties within the composite electrodes. Using cold pressing alone, it is challenging to form intimate contacts with rigid oxide-based cathode materials. Here, we demonstrate a mild-temperature pressing (MP) method for the fabrication of all-solid-state batteries. The mild temperature (85 °C) increases the deformability of the sulfide and therefore helps to form more enhanced interfacial contacts in the composite cathode without side reactions. Compared with the conventional cold pressing cell, the MP cell possesses more favorable contacts, resulting in higher capacity, cyclability, and rate capability. In addition, we demonstrate that the charge-transfer resistance in composite cathodes dominates the electrochemical performance of all-solid-state batteries.

State-of-the-art anodes of potassium-ion batteries: synthesis, chemistry, and applications.

The growing demand for green energy has fueled the exploration of sustainable and eco-friendly energy storage systems. To date, the primary focus has been solely on the enhancement of lithium-ion battery (LIB) technologies. Recently, the increasing demand and uneven distribution of lithium resources have prompted extensive attention toward the development of other advanced battery systems. As a promising alternative to LIBs, potassium-ion batteries (KIBs) have attracted considerable interest over the past years owing to their resource abundance, low cost, and high working voltage. Capitalizing on the significant research and technological advancements of LIBs, KIBs have undergone rapid development, especially the anode component, and diverse synthesis techniques, potassiation chemistry, and energy storage applications have been systematically investigated and proposed. In this review, the necessity of exploring superior anode materials is highlighted, and representative KIB anodes as well as various structural construction approaches are summarized. Furthermore, critical issues, challenges, and perspectives of KIB anodes are meticulously organized and presented. With a strengthened understanding of the associated potassiation chemistry, the composition and microstructural modification of KIB anodes could be significantly improved.

Multiscale Understanding of Covalently Fixed Sulfur-Polyacrylonitrile Composite as Advanced Cathode for Metal-Sulfur Batteries.

Metal-sulfur batteries (MSBs) provide high specific capacity due to the reversible redox mechanism based on conversion reaction that makes this battery a more promising candidate for next-generation energy storage systems. Recently, along with elemental sulfur (S8 ), sulfurized polyacrylonitrile (SPAN), in which active sulfur moieties are covalently bounded to carbon backbone, has received significant attention as an electrode material. Importantly, SPAN can serve as a universal cathode with minimized metal-polysulfide dissolution because sulfur is immobilized through covalent bonding at the carbon backbone. Considering these unique structural features, SPAN represents a new approach beyond elemental S8 for MSBs. However, the development of SPAN electrodes is in its infancy stage compared to conventional S8 cathodes because several issues such as chemical structure, attached sulfur chain lengths, and over-capacity in the first cycle remain unresolved. In addition, physical, chemical, or specific treatments are required for tuning intrinsic properties such as sulfur loading, porosity, and conductivity, which have a pivotal role in improving battery performance. This review discusses the fundamental and technological discussions on SPAN synthesis, physicochemical properties, and electrochemical performance in MSBs. Further, the essential guidance will provide research directions on SPAN electrodes for potential and industrial applications of MSBs.