Effects of the Mandibular Functional Units and Soft Tissue on Facial Asymmetry.

Mandibular asymmetry has a variety of patterns because they are affected the position and the shape of mandible in addition to the overlying soft tissue. This study aimed to assess the factor in mandibular asymmetry, focusing on each mandibular functional units and the soft tissue thickness in the mandibular angle area. Forty patients who were diagnosed with facial asymmetry and undergone the orthognathic surgery without genioplasty were enrolled in this study. The skeletal patterns of the patients were analyzed by using cone-beam computed tomography data and 3D virtual images divided into 2 categories; the mandibular functional unit length and the soft tissue depth. All difference in bilateral mandibular functional unit lengths had a statistically significant with chin top deviation ( P <0.05). The greatest correlation was the condylar unit length compared with other functional units. The soft tissue thickness in the mandibular angle area was not statistically related to chin top deviation ( P >0.05), and the soft tissue did not change remarkably after orthognathic surgery ( P >0.05). This study suggests that the considerations of a surgical plan for treatment based on the mandibular asymmetry.

Which Skeletal Factors Can Affect Lip Canting in Facial Asymmetry?: Statistical Analysis.

Lip canting, which is a noticeable factor in patients with facial asymmetry, can be influenced by the dentofacial skeleton. During orthognathic surgery, postoperative changes in facial soft tissue occur along the newly positioned hard tissue. Therefore, the evaluation of soft tissue before surgery is important. The purpose of this study was to investigate the skeletal factors that can affect lip canting by statistically comparing 2 facial horizontal planes using a three-dimensional reconstruction model. The findings of the present study showed a statistical correlation between lip canting and 3 skeletal factors: menton deviation, maxillary canting, and ramal length differences. Furthermore, a statistical correlation was identified between the Frankfort Horizontal plane and the intercanthal plane compared with the lip canting line. This result suggests that the intercanthal plane could be a standard horizontal plane in three-dimensional reconstruction model analysis.

Stability of vertical dimension following total arch intrusion.

BACKGROUND: The purpose of this study is to evaluate stability of vertical dimension following total arch intrusion using miniscrews by measuring the change during treatment and relapse amount after more than one year of retention. METHODS: Thirty patients (6 men, 24 women) were included in this study. Lateral cephalographs were taken with conventional radiography at the start of treatment (T0), after treatment (T1), and at least one year after treatment (T2). The evaluation was performed by measuring changes of selected parameters during treatment and the extent of relapse after more than one year. RESULTS: During total arch intrusion treatment (T1-T0), anterior and posterior teeth intruded significantly. The mean vertical distance between the maxillary posterior teeth and palatal plane was reduced by 2.30 mm (P < 0.001). The mean vertical distance between the maxillary anterior teeth and palatal plane was reduced by 2.04 mm (P < 0.001). The anterior facial height was also reduced by 2.70 mm (P < 0.001). During retention period (T2-T1), the vertical distance between the maxillary anterior teeth and the palatal plane significantly increased by 0.92 mm (P < 0.001). The anterior facial height increased by 0.81 mm (P < 0.01). CONCLUSIONS: Anterior facial height significantly decreases after treatment. During retention period, relapse of AFH and maxillary anterior teeth observed. There was no correlation between initial amount of AFH, mandibular plane angle, or SNPog and posttreatment AFH relapse. However, there was a significant correlation between the amount of intrusion of anterior and posterior teeth achieved by the treatment and the extent of relapse.

Posttreatment stability of an anterior open-bite by molar intrusion compared with 2-jaw surgery - a retrospective study.

OBJECTIVES: This study aimed to compare post-treatment stability in patients with anterior open-bite (AOB) between those treated surgically (orthognathic 2-jaw surgery) and non-surgically (molar intrusion using orthodontic miniscrews). MATERIALS AND METHODS: All subjects had initial overbite (OB) < -1 mm and lateral cephalograms taken before treatment (T0), immediately after AOB correction (T1), after orthodontic treatment (T2), and at least 1 year after treatment (T3). The non-surgical group was enrolled retrospectively; then, the surgical group was matched by OB, sex, and age to the non-surgical group (n = 21 each). Changes in cephalometric measurements during treatment (T1-T0), finishing (T2-T1), and retention (T3-T2) periods were compared between two groups. RESULTS: OB increased by 4.5-5.1 mm during the treatment period with 3.3 mm upward movement of the maxillary first molar (U6) in both groups. Changes in OB were not significantly different between the groups: 0.5-0.9 mm increase during the finishing period but 1.0 mm decrease during the retention period (P > 0.05). U6 moved 0.5 mm downward in non-surgical group and 0.1 mm upward in the surgical group during the finishing period, and 1.0 mm and 0.4 mm downward in the non-surgical and surgical groups, respectively, during the retention period. CONCLUSIONS: Post-treatment stability of AOB was similar for surgical and non-surgical methods (76.8 - 78.7%), although U6 moved more downward in the non-surgical group than in the surgical group. CLINICAL RELEVANCE: AOB without severe skeletal deformity can be treated by either molar intrusion or orthognathic surgery with similar treatment outcome and stability.

Reliability of Anterior Nasal Spine as a Reference Point After LeFort I Surgery Using Three-Dimensional Analysis.

ABSTRACT: To evaluate the stability of maxilla following orthognathic surgery, it is necessary to consider the positional change of various landmarks according to bone remodeling of the maxilla. This study aimed to evaluate the stability of the anterior nasal spine (ANS) as a reliable landmark after orthognathic surgery. Forty-seven patients with skeletal class III malocclusion who underwent bimaxillary orthognathic surgery were included. Skeletal changes were measured using cone-beam computerized tomography at 3 time points: preoperative (T0), 1-month postoperative (T1), and 12-month postoperative (T2). Linear changes of the 6 landmark points of the maxilla were measured in 3 directions: anteroposterior, vertical, and transverse. The data were analyzed with paired t tests, independent t tests, and multiple regression analysis. At 12-month postoperatively, the ANS showed mean (standard deviation) 1.23 (1.07) mm posterior movement ( P = 0.00), while other landmarks did not show positional changes, implying bony resorption of ANS. Multiple regression test showed surgical forward movements of ANS (T1-0) affect the postoperative backward changes (ß = -0.05, P < 0.05). There was a negative correlation between the surgical movement and postoperative change of ANS by Pearson correlation test ( r = -0.38, P < 0.05). The ANS is not a reliable measurement point in three-dimensional superimposition after orthognathic surgery. Therefore, in studying the stability and positional change pattern after LeFort I surgery, it is not recommended to use ANS as a reference point, as changes can occur in the measurement point itself.

Predictors of Blood Loss During Orthognathic Surgery and the Need for Pre-Deposit Autologous Blood Donation.

ABSTRACT: The aim of this study was to identify the clinicolaboratory predictors of relative blood loss (RBL) during orthognathic surgery and determine the need for predeposit autologous blood donation (PABD) for the surgery. Using a retrospective study design, 297 patients who underwent bimaxillary orthognathic surgery between 2016 and 2020 were enrolled. To investigate patient-specific risk factors, we calculated the allowable blood loss (ABL) for each patient and RBL as the ratio of estimated intraoperative blood loss (EiBL) to ABL. The correlations between the clinico-laboratory variables and EiBL and RBL were analyzed using stepwise multivariate regression analysis, and independent t test and one-way ANOVA were performed.There was no significant difference in transfusion rate between the PABD group (N = 202/279) and non-PABD group (N = 77/279) ( P   =  0.052). Sex ( P   <  0.001), body mass index class ( P   =  0.001), operative time ( P  < 0.001), and baseline hematocrit ( P  < 0.001) were significant predictors of EIBL and RBL. EIBL exceeded ABL in only 2 patients. The significant factors of RBL in orthognathic surgery were hematocrit, body mass index, and operative time. Clinicians should be more careful about bleeding in patients with low baseline hematocrit level or high body mass index, or those expected to undergo prolonged surgeries owing to a complicated surgical plan. The need for PABD before orthognathic surgery is low.

Tissue-specific biomarkers in gingival crevicular fluid are correlated with external root resorption caused by constant mechanical load: an in vivo study.

OBJECTIVES: This study investigated the association of changes in cementum protein-1 (CEMP-1), dentine phosphoprotein (DPP), and c-terminal cross-linked telopeptide of type I collagen (CTX-I) levels in human gingival crevicular fluid (GCF) under constant load with external root resorption volume and amount of tooth movement. MATERIALS AND METHODS: In total, 11 healthy adult patients (mean age, 23.5 years [range, 18.3-37.7]; four men and seven women) were enrolled. GCF samples were obtained from premolars at T0, T1 (1 day), T2 (1 week), T3 (2 weeks), T4 (4 weeks), and T5 (8 weeks) under constant 100-gm buccal tipping force. Opposite premolars were used as controls. Teeth were extracted at T5, followed by quantification of external root resorption volume and histological analysis. RESULTS: In the test group, T5/T0 ratios of CEMP-1 and DPP levels, differential CEMP-1 levels between T5 and T0, and differential DPP levels between T2 and T0 correlated positively with root resorption volume (r = 0.734, 0.730, 0.627, and 0.612, respectively, all p < 0.05). CEMP-1 levels at T0 and T3 correlated negatively with root resorption volume (r = -0.603 and -0.706; all p < 0.05). CTX-I levels at T5 correlated positively with the amount of tooth movement (r = 0.848, p < 0.01). CONCLUSIONS: Alterations in CEMP-1 and DPP levels in human GCF at specific timepoints during orthodontic treatment may be associated with different degrees of external root resorption. CLINICAL RELEVANCE: This study demonstrates that changes in the levels of tissue-specific biomarkers in GCF may facilitate early detection of external root resorption during orthodontic tooth movement.

Differences in soft-tissue thickness changes after bimaxillary surgery between patients with vertically high angle and normal angle.

INTRODUCTION: We evaluated soft-tissue thickness changes after bimaxillary surgery according to vertical facial patterns in patients with skeletal Class III malocclusion with mandibular prognathism. METHODS: Forty-three Korean patients (16 men and 27 women; mean age, 22.6 ± 4.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into 2 groups: normal-angle group (N group) and high-angle group (H group), on the basis of the presurgical angle of the mandibular plane relative to the sella-nasion plane (SN-MP). Changes in hard-tissue landmarks and soft-tissue thickness before and after surgery were analyzed from reconstructed 3-dimensional cone-beam computed tomography images. Postoperative soft-tissue thickness in both groups was compared with that in 40 patients with normal skeletal Class I malocclusion in the reference group. RESULTS: Group N (27°-37°) and group H (>37°) did not differ significantly in terms of sex and age before surgery. Preoperative pogonion (Pog) thickness was significantly less in group H (9.7 ± 1.6 mm) than in group N (10.8 ± 1.9 mm) (P = 0.042). Adjusted multiple linear regression analysis showed a weak positive linear relationship between the SN-MP before surgery and soft-tissue Pog thickness change (R2 of 0.361; P = 0.001) after surgery, but the area below the lower lips was not completely normalized despite surgery. CONCLUSIONS: The thickness of the soft-tissue Pog may increase slightly after surgery in patients with skeletal Class III malocclusion with a higher preoperative mandibular plane angle, but normalization in the area cannot be completely achieved despite surgery.

Diagnosis and Surgical Outcomes of Facial Asymmetry According to the Occlusal Cant and Menton Deviation.

PURPOSE: Morphologic differences and surgical outcomes were compared between the ipsilateral type of facial asymmetry, in which the menton deviates to the side of the upward frontal occlusal plane (FOP) cant (FOPUP), and the contralateral type, in which the menton deviates to the side of the downward FOP cant (FOPDOWN), by using cone beam computed tomography (CBCT) images. MATERIALS AND METHODS: This retrospective study included consecutive patients with skeletal Class III malocclusion and facial asymmetry who had undergone bimaxillary orthognathic surgery and serial CBCT before, 1 month after, and 1 year after surgery. CBCT images were reconstructed and analyzed for predictor (group and timing) and outcome (CBCT measurements over time) variables. The data were analyzed using independent t tests and paired t tests. RESULTS: The contralateral group (n = 12) was selected first; the ipsilateral group (n = 12) was selected by matching age, gender, and degree of FOP cant with those of the contralateral group. Before surgery, in the ipsilateral group, the ramal length was longer on the nondeviated (N-Dev) side than on the deviated (Dev) side (P < .05) whereas the mandibular body length showed no significant difference (P > .05). In the contralateral group, the ramal length was longer on the Dev side (P < .05) whereas the mandibular body length was longer on the N-Dev side (P < .01). One year after surgery, most measurements were corrected symmetrically in both groups (P > .05); however, the hemi-lower facial area remained asymmetrical in the contralateral group (P < .05). CONCLUSIONS: Differences in ramal lengths in the ipsilateral group and mandibular body lengths in the contralateral group between the Dev and N-Dev sides seemed to be the main cause of facial asymmetry. Although facial asymmetry improved after surgery in both groups, asymmetry in the soft tissue remained in the contralateral group 1 year after surgery.

Three-Dimensional Analysis of Transverse Width of Hard Tissue and Soft Tissue After Mandibular Setback Surgery Using Intraoral Vertical Ramus Osteotomy: A Retrospective Study.

PURPOSE: Some clinicians are concerned that if an intraoral vertical ramus osteotomy (IVRO) is used to position the mandible posteriorly, the proximal segments should be positioned laterally to the distal segment, which could increase the transverse mandibular width, leading to esthetically unfavorable results. This study investigated short- and long-term postoperative transverse mandibular width changes in the soft and hard tissue after IVRO for mandibular prognathism. MATERIALS AND METHODS: The study comprised 44 patients who were treated with mandibular setback surgery using an IVRO. They were categorized into either the facial symmetry group or facial asymmetry group based on their preoperative levels of chin top deviation. Three-dimensional cone-beam computed tomography images were obtained at the preoperative, 1-month postoperative, and 12-month postoperative stages, designated as T1, T2, and T3, respectively. We set hard tissue width 1 (HW1) and hard tissue width 2 (HW2) as the sum of the distance at the bilateral ends of the angle and ramus, respectively, and set soft tissue width 1 (SW1) and soft tissue width 2 (SW2) as the sum of the distance at the bilateral ends of the soft tissue angle and ramus, respectively. RESULTS: Compared with the value at T1, the HW1 value increased by 8.16% (P < .05) and HW2 increased by 4.39% (P > .05) at T2; HW1 increased by 4.35% (P < .05) and HW2 increased by 2.95% (P > .05) at T3. Compared with the value at T1, the SW1 value increased by 2.49% and SW2 increased by 2.50% at T2; however, SW1 decreased by 0.85% and SW2 increased by 0.37% at T3. The soft tissue variations between T1 and T2, as well as between T2 and T3, were statistically significant. However, no significant difference was found between T1 and T3 (P > .05). No difference between the facially symmetrical and asymmetrical groups was found over time for soft and hard tissues (P > .05). CONCLUSIONS: Notably, IVRO does not seem to impact the transverse facial profile and enables reliable prediction of the esthetic results of surgery.

Intraoral Premaxillary Distraction in a Patient With Maxillary Retrognathic Cleft Lip and Palate: A Case Report.

Patients with cleft lip and palate sometimes have a retruded maxilla. Here, we describe the case of a young man in whom crowding of the maxillary teeth and an anteroposterior discrepancy of the maxilla were resolved by premaxillary distraction osteogenesis (DO) using 3 individual intraoral distractors. Our experience in this patient confirms that premaxillary DO with 3 intraoral distractors and preoperative simulation can achieve stable maxillary advancement and arch expansion without impairing velopharyngeal incompetence.

Treatment of Medication-Related Osteonecrosis of the Jaw Around the Dental Implant With a Once-Weekly Teriparatide: A Case Report and Literature Review.

Managing medication-related osteonecrosis of the jaw (MRONJ) around a dental implant can be difficult. Although conservative treatment of MRONJ is recommended as the first-line form of management, many patients exhibit no improvement. The human recombinant parathyroid hormone teriparatide has recently been introduced for the management of MRONJ. Teriparatide is effective in the treatment of postmenopausal osteoporosis and is the only US Food and Drug Administration-approved anabolic agent that directly affects osteoblast function and contributes to bone remodeling. Herein we describe a case of MRONJ in an 85-year-old woman who was successfully treated with teriparatide. Teriparatide was administered once per week without any surgical interventions such as a sequestrectomy. Compared with most recently reported cases involving daily treatment with teriparatide, once-weekly administration of teriparatide may minimize side effects and patient discomfort. Once-weekly teriparatide application without sequestrectomy may be effective in the management of MRONJ around a dental implant.

Immunohistochemical Analysis on Cortex-to-Cortex Healing After Mandibular Vertical Ramus Osteotomy: A Preliminary Study.

PURPOSE: The present study analyzed the expression of specific cytokines in the transforming growth factor (TGF)-ß superfamily postoperatively after mandibular vertical ramus osteotomy (VRO). MATERIALS AND METHODS: Four beagle dogs were enrolled and euthanized at 1, 2, 4, and 8 weeks postoperatively for immunohistochemical analysis using 6 specific antibodies (bone morphogenetic protein [BMP]-2/4, BMP-7, TGF-ß2, TGF-ß3, matrix metalloproteinase-3, and vascular endothelial growth factor [VEGF]). The results from the surgical site and control (adjacent area) were compared. RESULTS: Generalized upregulation of BMP-2/4 was observed in all healing periods, and the strongest expression of BMP-7 was observed at 1 week postoperatively. The strongest expression of TGF-ß2 was observed at 8 weeks with increasing pattern. The strong expression of TGF-ß3 was observed at 1 and 4 weeks, with the strongest expression of VEGF at 1 week, with a decreasing pattern. No notable uptake was detected with the 6 specific antibodies in the adjacent bone (control). CONCLUSIONS: The absence of internal fixation after VRO led to dynamic healing with a specific expression pattern of BMP-7 and TGF-ß2. The anatomic factors, including sufficient preexisting vascularity, led to the earlier expression pattern of VEGF.

Safety and Stability of Postponed Maxillomandibular Fixation After Intraoral Vertical Ramus Osteotomy.

The purpose of this study was to evaluate the postoperative safety and long-term stability of bimaxillary orthognathic patients with postponed maxillomandibular fixation (MMF) after intraoral vertical ramus osteotomy.A total of 61 patients (21 male and 40 female patients; average age [SD], 21.7 [4.7]) were enrolled. All patients underwent maxillary LeFort I osteotomy and bilateral intraoral vertical ramus osteotomy for mandibular prognathism. During the hospital stay, postoperative airway compromise was observed and patients underwent MMF with wire at the second postoperative day. Stability was evaluated by measuring the position at each period: preoperative (T0), 2-day postoperative (T1), and 1-year postoperative.Postoperative dyspnea and respiratory distress were absent in all patients. The mean number of refixations in physiotherapy was 0.62 (0.86) and the mean duration of physiotherapy was 11.6 (5.5) days. The mean amount of mandibular setback was 12.56 (5.76) mm and menton movement 0.98 (2.36) mm superiorly (T1). The mean mandibular relapse at Pog was 0.87 (1.96) mm anteriorly. Menton showed 1.11 (1.41) mm superiorly movement 1-year postoperatively (T2).Despite its many advantages, intraoral vertical ramus osteotomy requires a period of MMF which can lead to early discomfort and airway-related emergency. In this study, the physiotherapy procedure and postoperative long-term stability in the postponed MMF group were not different from those of an immediate MMF group studied previously. It therefore constitutes a viable option for oral breathers and other compromised patients.

Precision and trueness of dental models manufactured with different 3-dimensional printing techniques.

INTRODUCTION: In this study, we assessed the precision and trueness of dental models printed with 3-dimensional (3D) printers via different printing techniques. METHODS: Digital reference models were printed 5 times using stereolithography apparatus (SLA), digital light processing (DLP), fused filament fabrication (FFF), and the PolyJet technique. The 3D printed models were scanned and evaluated for tooth, arch, and occlusion measurements. Precision and trueness were analyzed with root mean squares (RMS) for the differences in each measurement. Differences in measurement variables among the 3D printing techniques were analyzed by 1-way analysis of variance (α = 0.05). RESULTS: Except in trueness of occlusion measurements, there were significant differences in all measurements among the 4 techniques (P <0.001). For overall tooth measurements, the DLP (76 ± 14 µm) and PolyJet (68 ± 9 µm) techniques exhibited significantly different mean RMS values of precision than the SLA (88 ± 14 µm) and FFF (99 ± 14 µm) techniques (P <0.05). For overall arch measurements, the SLA (176 ± 73 µm) had significantly different RMS values than the DLP (74 ± 34 µm), FFF (89 ± 34 µm), and PolyJet (69 ± 18 µm) techniques (P <0.05). For overall occlusion measurements, the FFF (170 ± 55 µm) exhibited significantly different RMS values than the SLA (94 ± 33 µm), DLP (120 ± 28 µm), and PolyJet (96 ± 33 µm) techniques (P <0.05). There were significant differences in mean RMS values of trueness of overall tooth measurements among all 4 techniques: SLA (107 ± 11 µm), DLP (143 ± 8 µm), FFF (188 ± 14 µm), and PolyJet (78 ± 9 µm) (P <0.05). For overall arch measurements, the SLA (141 ± 35 µm) and PolyJet (86 ± 17 µm) techniques exhibited significantly different mean RMS values of trueness than DLP (469 ± 49 µm) and FFF (409 ± 36 µm) (P <0.05). CONCLUSIONS: The 3D printing techniques showed significant differences in precision of all measurements and in trueness of tooth and arch measurements. The PolyJet and DLP techniques were more precise than the FFF and SLA techniques, with the PolyJet technique having the highest accuracy.

Nasal Soft Tissue Change Following Bimaxillary Orthognathic Surgery.

OBJECTIVE: The purpose of this study is to identify the correlation between maxillary movement and nasal soft tissue changes on three-dimensional reconstructed cone beam computed tomography (CBCT) images after Le Fort I osteotomy. MATERIALS AND METHODS: The authors also investigate the long-term change of alar base width (ABW) to determine the effect of cinch suture. The authors retrospectively studied 52 subjects (14 males and 38 females) who were treated by bimaxillary orthognathic surgery including Le Fort I osteotomy and mandibular ramus surgery. The landmarks and planes were established on three-dimensional reconstructed CBCT images. The authors measured each parameters preoperatively, 1 month postoperatively, and 1 year postoperatively. RESULTS: There was no significant correlation between the horizontal movement of A-point and the widening of ABW (P < 0.038), nor was there a significant correlation between the vertical movement of A-point and the change of ABW (P < 0.61). There was no significant correlation between horizontal and vertical movement of anterior nasal spine and the widening of ABW, nor was there a significant correlation between the nasal tip length and the vector of maxillary movement. CONCLUSION: There was no significant correlation between the ABW widening and the vector of surgical maxillary movement. The effect and stability of the alar base cinch suture is difficult to determine and require further investigation.

A Case of Pentastomiasis at the Left Maxilla Bone in a Patient with Thyroid Cancer.

Pentastomiasis, a zoonotic parasite infection, is typically found in the respiratory tract and viscera of the host, including humans. Here, we report for the first time an extremely rare case of intraosseous pentastomiasis in the human maxilla suffering from medication related osteonecrosis of the jaw (MRONJ). A 55-year-old male had continuously visited the hospital for MRONJ which had primarily developed after bisphosphonate and anti-neoplastic administration for previous bone metastasis of medullary thyroid cancer. Pain, bone exposure, and pus discharge in the right mandible and left maxilla were seen. Osteolysis with maxillary cortical bone perforation at the left buccal vestibule, palate, nasal cavity, and maxillary sinus was observed by radiologic images. A biopsy was done at the left maxilla and through pathological evaluation, a parasite with features of pentastome was revealed within the necrotic bone tissue. Further history taking and laboratory evaluation was done. The parasite was suspected to be infected through maxillary open wounds caused by MRONJ. Awareness of intraosseous pentastomiasis should be emphasized not to be missed behind the MRONJ. Proper evaluation and interpretation for past medical history may lead to correct differential diagnosis and therapeutic intervention for parasite infections.

Unilateral mandibular advancement with bilateral intraoral vertical ramus osteotomy.

Intraoral vertical ramus osteotomy (IVRO) is an effective surgical procedure that is used for the correction of mandibular prognathism. However, application of IVRO for mandibular advancement has been limited because of the instability of the proximal segments caused by the gap between the distal and proximal segments. We report a case of unilateral mandibular advancement with bilateral IVRO for the correction of facial asymmetry. This case shows possible application of bilateral IVRO for unilateral mandibular advancement without any means of fixation.

Skeletal and dentoalveolar effects of miniscrew-assisted rapid palatal expansion based on the length of the miniscrew: a randomized clinical trial.

OBJECTIVES: To compare skeletal and dentoalveolar changes of miniscrew-assisted rapid palatal expansion (MARPE) according to the length of the miniscrews. MATERIALS AND METHODS: This two-arm parallel-randomized controlled trial included 32 adult patients aged 19-35 years who received orthodontic treatment with MARPE. Patients were allocated to two groups, group long (L) and short (S), through block randomization according to the length of the miniscrews installed in MARPE. Cone-beam computed tomography was performed before expansion and after removal of the MARPE; superimposition of the images was conducted. The primary outcome included the amount of bone expansion and the change in the inclination of the anchorage teeth. The secondary outcome included the success rate of midpalatal suture opening and stability of the miniscrews. Blinding was performed during outcome assessment. RESULTS: The final sample comprised 31 patients. There was no significant difference in patient characteristics between group L (n = 16) and group S (n = 15). The change in the width of the processus zygomaticus (P = .010) and ectocanine (P = .001) was significantly higher in group L. A significantly higher success rate of the posterior miniscrews was seen in group L (P = .024). There was no statistically significant difference in the success rate of suture separation or change in tooth inclination. Notable complications were not reported. CONCLUSIONS: MARPE with longer miniscrews can increase the amount of expansion of the maxillary basal bone and canine alveolar bone. Although it also aided in miniscrew stability, it did not guarantee successful midpalatal suture separation.

Recovery pattern of mandibular movement by active physical therapy after bilateral transoral vertical ramus osteotomy.

PURPOSE: The purpose of the present study was to evaluate the effect of an active physical therapy (PT) protocol after transoral vertical ramus osteotomy and to investigate the rehabilitation patterns of mandibular movement. MATERIALS AND METHODS: The study included 187 patients diagnosed with mandibular prognathism with or without facial asymmetry who had undergone bilateral transoral vertical ramus osteotomy from 2001 to 2009. The subjects were evaluated preoperatively and 1, 3, 6, 12, 18, and 24 months postoperatively in terms of the periods of PT and range of mandibular movement. The data were analyzed using 1-way analysis of variance (significance level, P < .05). RESULTS: Of the 187 patients, 108 (57.8%) did not receive repeat intermaxillary fixation (IMF) during the PT period, 58 (31.0%) received it once, 15 (8.0%) twice, and 6 patients more than 3 times. The average PT period for all was 10.9 days (range 5 to 45). The mean maximal mouth opening was 50.7 mm before surgery, decreasing to 33.9 mm at 1 month postoperatively. This was followed by an increase to 46.3 mm at 6 months postoperatively, with the maximal mouth opening thereafter showing 93.9% to 95.7% recovery compared with the preoperative state. CONCLUSIONS: About 88% of the patients with transoral vertical ramus osteotomy responded well to the reduced IMF duration and active PT protocols, receiving repeat IMF less than twice. It required about 6 months to recover 90% of the preoperative maximal mouth opening and 12 months to recover near preoperative levels statistically. The benefits of reduced IMF duration and the PT protocols seem to promote rehabilitation of the masticatory muscles and prevention of mandibular hypomobility.