RESUMO
N-Heterocyclic carbene (NHC)-stabilized metal nanoparticles (NPs) have recently attracted considerable attention. While most efforts in the field have been devoted to the development of NHC-tethered monometallic NPs and enhancing their stabilities under various conditions, their bimetallic counterparts are rare in the literature. Herein, we demonstrate that the covalent immobilization of Au and Ag atoms on polymerized NHCs is a powerful method to access bimetallic AuAg NPs. In addition, we show that while AuAg alloy NPs are often obtained via this method, the use of bimetallic polymeric substrates with lower Ag content, relative to Au, results in the formation of core-shell NPs with Au core and Ag shell. Application of these nanomaterials for oxygen reduction reaction is demonstrated with all materials exhibiting electrocatalytic activity. This work demonstrates for the first time that while bimetallic poly(NHC-metal)s are viable substrates to access NHC-stabilized bimetallic NPs, careful adjustment of metal content in the polymeric substrates can finetune the microstructure of the resulting NPs, i.e. alloy vs. core-shell.
RESUMO
Metal-organic frameworks (MOFs) that display photoredox activity are attractive materials for sustainable photocatalysis. The ability to tune both their pore sizes and electronic structures based solely on the choice of the building blocks makes them amenable for systematic studies based on physical organic and reticular chemistry principles with high degrees of synthetic control. Here, we present a library of eleven isoreticular and multivariate (MTV) photoredox-active MOFs, UCFMOF-n, and UCFMTV-n-x% with a formula Ti6O9[links]3, where the links are linear oligo-p-arylene dicarboxylates with n number of p-arylene rings and x mol% of multivariate links containing electron-donating groups (EDGs). The average and local structures of UCFMOFs were elucidated from advanced powder X-ray diffraction (XRD) and total scattering tools, consisting of parallel arrangements of one-dimensional (1D) [Ti6O9(CO2)6]∞ nanowires connected through the oligo-arylene links with the topology of the edge-2-transitive rod-packed hex net. Preparation of an MTV library of UCFMOFs with varying link sizes and amine EDG functionalization enabled us to study both their steric (pore size) and electronic (highest occupied molecular orbital-lowest unoccupied molecular orbital, HOMO-LUMO, gap) effects on the substrate adsorption and photoredox transformation of benzyl alcohol. The observed relationship between the substrate uptake and reaction kinetics with the molecular traits of the links indicates that longer links, as well as increased EDG functionalization, exhibit impressive photocatalytic rates, outperforming MIL-125 by almost 20-fold. Our studies relating photocatalytic activity with pore size and electronic functionalization demonstrate how these are important parameters to consider when designing new MOF photocatalysts.
RESUMO
In recent years, N-heterocyclic carbenes (NHCs) have garnered significant attention as promising alternatives to thiols to stabilize metallic nanoparticles and planar surfaces. While most studies thus far have focused on NHC-functionalized gold nanoparticles (AuNPs), as an ideal platform to investigate the role of NHCs in stabilizing such nanoparticles, their ability to protect more unstable coinage metal nanoparticles, such as silver nanoparticles (AgNPs), has been largely overlooked. This is despite the fact that AgNPs possess a much more sensitive optical response that, upon their enhanced stability, can broaden their scope of application in various fields, including nanomedicine and catalysis. In this study, the synthesis and use of monomeric and polymeric mesoionic NHC-Ag(I) complexes as precursors to mono- and multidentate NHC-tethered AgNPs are reported. The polymeric analog was obtained by first synthesizing a polymer, containing 1,2,3-triazole repeat units, employing the copper-catalyzed alkyne-azide cycloaddition click polymerization of monomers containing diazide- and dialkyne functional groups. Subsequent quaternization of the triazole moieties and Ag insertion yielded the target NHC-Ag-containing polymer. Using this polymer as well as its monomeric analog as substrates, AgNPs with either catenated networks of NHCs or monomeric NHCs were fabricated by their reduction using borane-tert-butylamine complex. Our stability studies demonstrate that while monomeric NHCs impart some degree of stability to AgNPs, particularly at elevated temperatures in aqueous as well as organic medium, their polymeric analogs further enhance their stability in acidic environment (pH = 2) and against glutathione (3 mM), as an example of a biologically relevant thiol, in aqueous media. To highlight the application of these NHC-functionalized AgNPs in catalysis, we explore the aqueous phase reduction of methyl orange and 4-nitrophenol.
RESUMO
The interaction of hydrogen-terminated silicon nanoparticles (H-SiNPs) with Karstedt's catalyst at various temperatures was investigated. The results indicate that at room temperature, the oxidative addition of Pt(0) onto H-SiNPs is irreversible, and the catalyst is not eliminated from the surface of H-SiNPs, enabling a facile synthesis of Pt-loaded SiNPs that can undergo ligand exchange. The nature of the Pt-on-Si ensemble is characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Reaction conditions that enable effective hydrosilylation are discussed. It is found that higher temperatures favor reductive elimination of the catalyst and hydrosilylation of 1-octene onto the surface of the H-SiNPs.
RESUMO
Dicarbon is a reactive carbon allotrope that naturally exists only in the high-temperature medium of stellar space. We report the successful preparation of a series of bottleable phosphine-stabilized dicarbon (PDC) molecules. We explore the use of these molecules as a new complementary class of carbene-like ligands featuring strong σ-donor (>NHCs and CAAcs) but weak π-acceptor properties. Steric map analysis of PDC based on Cavallo's SambVca program reveals comparable steric volume bulk of 32.5%, similar to the conventional IMes carbene. However, our PDCs exhibit dynamic steric flexibility modulated by the nature of the metal complexes and catalytic reaction environment. We demonstrate the catalytic utility of the PDC framework by its successful implementation for Suzuki-Miyaura cross-coupling and the reductive coupling reaction of an aldehyde and alkyne. Detailed investigations of the reductive coupling reaction reveal an important secondary interaction between PDC and metal complexes, which plays a critical role in the catalytic system.
RESUMO
"MoCl3(dme)" (dme = 1,2-dimethoxyethane) is an important precursor for midvalent molybdenum chemistry, particularly for triply Mo-Mo bonded compounds of the type Mo2X6 (X = bulky anionic ligand). However, its exact structural identity has been obscure for more than 50 years. In search of a convenient, large-scale synthesis, we have found that trans-MoCl4(Et2O)2 dissolved in dme can be cleanly reduced with dimethylphenylsilane, Me2PhSiH, to provide khaki Mo2Cl6(dme)2 in â¼90% yield. If the reduction is performed on a small scale, single crystals suitable for X-ray crystallography can be obtained. Two different crystal morphologies were identified, each belonging to the P21/n space group, but with slightly different unit cell constants. The refined structure of each form is an edge-shared bioctahedron with overall Ci symmetry and metal-metal separations on the order of 2.8 Å. The bulk material is diamagnetic as determined by both the Gouy method and SQUID magnetometry. Density functional theory calculations suggest a σ2π2δ*2 ground state for the dimer with the diamagnetism arising from a singlet diradical "broken symmetry" electronic configuration. In addition to a definitive structural assignment for "MoCl3(dme)", this work highlights the utility of organosilanes as easy to handle, alternative reductants for inorganic synthesis.
RESUMO
A family of metal dichloride complexes having a bis-ferrocenyl-substituted pyridinediimine ligand was systematically synthesized ((Fc2PDI)MCl2, M = Mg, Zn, Fe, and Co) and characterized crystallographically, spectroscopically, electrochemically, and computationally. Electronic coupling between the ligand ferrocene units is switched on upon binding to a MCl2 fragment, as evidenced by both sequential oxidation of the ferrocenes in cyclic voltammetry (ΔEox ≈ 200 mV) and by Inter-Valence Charge Transfer electronic excitations in the near IR. Additionally, UV-vis spectra are used to directly observe orbital mixing between the ferrocenyl units and the imine π system since breaking of the orbital symmetry results in allowed transitions (ϵ = 2800 M-1cm-1 vs ϵ ≈ 200 M-1cm-1 in free ferrocene) as well as broadening and red-shifting of the ferrocenyl transitions-indicating organic character in formerly pure metal-centered transitions. DFT analysis reveals that interaction between the ferrocenes and the MCl2 fragment is small and suggests that communication is mediated by better energy matching between the ferrocene and organic π* orbitals upon coordination, allowing superexchange coupling through the LUMO. Furthermore, single crystal diffraction data obtained from oxidation of one and both ferrocenes show distortions, introducing the empty dxy/dx2-y2 orbitals into the secondary coordination sphere of the MCl2 fragment. Such structural rearrangements are infrequent in ferrocenyl mixed-valent compounds, and implications for catalysis as well as electronic communication are discussed.
RESUMO
A simple Ni(cod)2 and carbene mediated strategy facilitates the efficient catalytic cross-coupling of methoxyarenes with a variety of organoboron reagents. Directing groups facilitate the activation of inert C-O bonds in under-utilized aryl methyl ethers enabling their adaptation for C-C cross-coupling reactions as less toxic surrogates to the ubiquitous haloarenes. The method reported enables C-C cross-coupling with readily available and economical arylboronic acid reagents, which is unprecedented, and compares well with other organoboron reagents with similarly high reactivity. Extension to directing group assisted chemo-selective C-O bond cleavage, and further application towards the synthesis of novel bifunctionalized biaryls is reported. Key to the success of this protocol is the use of directing groups proximal to the reaction center to facilitate the activation of the inert C-OMe bond.
RESUMO
The catalytic reduction of 4-nitrophenol (4NP) with excess NaBH4 is the benchmark model for quantifying catalytic activity of nanoparticles. Although broadly useful, the reaction can be very selective. This can lead to false positives and negatives when utilized for catalyst down-selection from a broader materials candidate pool. We report a multi-nitrophenol cocktail screening methodology incorporating 4NP and other amino-nitrophenols, utilizing Ag, Au, Pt, and Pd nanoparticles on carbon support. The reduction of the cocktail proceeds with no deleterious side reactions on the time-scale tested. The resulting kinetic rates provide an improved correlation of relative catalyst activity when compared to performance with other reducible moieties (e. g. azo bonds), or when compared to solely 4NP screening.
RESUMO
Para-, or 4-nitrophenol, and related nitroaromatics are broadly used compounds in industrial processes and as a result are among the most common anthropogenic pollutants in aqueous industrial effluent; this requires development of practical remediation strategies. Their catalytic reduction to the less toxic and synthetically desirable aminophenols is one strategy. However, to date, the majority of work focuses on catalysts based on precisely tailored, and often noble metal-based nanoparticles. The cost of such systems hampers practical, larger scale application. We report a facile route to bulk cobalt oxide-based materials, via a combined mechanochemical and calcination approach. Vibratory ball milling of CoCl2(H2O)6 with KOH, and subsequent calcination afforded three cobalt oxide-based materials with different combinations of CoO(OH), Co(OH)2, and Co3O4 with different crystallite domains/sizes and surface areas; Co@100, Co@350 and Co@600 (Co@###; # = calcination temp). All three prove active for the catalytic reduction of 4-nitrophenol and related aminonitrophenols. In the case of 4-nitrophenol, Co@350 proved to be the most active catalyst, therein its retention of activity over prolonged exposure to air, moisture, and reducing environments, and applicability in flow processes is demonstrated.
Assuntos
Cobalto/química , Nitrofenóis/química , Óxidos/química , Aminofenóis/química , Catálise , Oxirredução , Óxidos/síntese química , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de Fourier , Análise Espectral Raman , Difração de Raios XRESUMO
The combination of conventional transition-metal-catalyzed coupling (2 e- process) and photoredox catalysis (1 e- process) has emerged as a powerful approach to catalyze difficult cross-coupling reactions under mild reaction conditions. Reported is a palladium carbodicarbene (CDC) complex that mediates both a Suzuki-Miyaura coupling and photoredox catalysis for C-N bond formation upon visible-light irradiation. These two catalytic pathways can be combined to promote both conventional transition-metal-catalyzed coupling and photoredox catalysis to mediate C-H arylation under ambient conditions with a single catalyst in an efficient one-pot process.
RESUMO
An investigation of carbodicarbenes, the less explored member of the carbenic complex/ligand family has yielded unexpected electronic features and concomitant reactivity. Observed 1,2-addition of E-H bonds (E = B, C, Si) across the carbone central carbon and that of the flanking N-heterocyclic carbene (NHC) fragment, combined with single-crystal X-ray studies of a model Pd complex strongly suggests a significant level of π-accepting ability at the central carbon of the NHC moiety. This feature is atypical of classic NHCs, which are strong σ-donors, with only nominal π-accepting ability. The unanticipated π-acidity is critical for engendering carbodicarbenes with reactivity more commonly observed with frustrated Lewis pairs (FLPs) rather than the more closely related NHCs and cyclic (alkyl)(amino)carbenes (CAACs).
RESUMO
Wet chemical screening reveals the very high reactivity of Mo(NMe2 )4 with H2 S for the low-temperature synthesis of MoS2 . This observation motivated an investigation of Mo(NMe2 )4 as a volatile precursor for the atomic layer deposition (ALD) of MoS2 thin films. Herein we report that Mo(NMe2 )4 enables MoS2 film growth at record low temperatures-as low as 60 °C. The as-deposited films are amorphous but can be readily crystallized by annealing. Importantly, the low ALD growth temperature is compatible with photolithographic and lift-off patterning for the straightforward fabrication of diverse device structures.
RESUMO
Although the dehydrogenation chemistry of amine-boranes substituted at nitrogen has attracted considerable attention, much less is known about the reactivity of their B-substituted analogues. When the B-methylated amine-borane adducts, RR'NH·BH2Me (1a: R = R' = H; 1b: R = Me, R' = H; 1c: R = R' = Me; 1d: R = R' = iPr), were heated to 70 °C in solution (THF or toluene), redistribution reactions were observed involving the apparent scrambling of the methyl and hydrogen substituents on boron to afford a mixture of the species RR'NH·BH3-xMex (x = 0-3). These reactions were postulated to arise via amine-borane dissociation followed by the reversible formation of diborane intermediates and adduct reformation. Dehydrocoupling of 1a-1d with Rh(I), Ir(III), and Ni(0) precatalysts in THF at 20 °C resulted in an array of products, including aminoborane RR'NâBHMe, cyclic diborazane [RR'N-BHMe]2, and borazine [RN-BMe]3 based on analysis by in situ (11)B NMR spectroscopy, with peak assignments further supported by density functional theory (DFT) calculations. Significantly, very rapid, metal-free hydrogen transfer between 1a and the monomeric aminoborane, iPr2NâBH2, to yield iPr2NH·BH3 (together with dehydrogenation products derived from 1a) was complete within only 10 min at 20 °C in THF, substantially faster than for the N-substituted analogue MeNH2·BH3. DFT calculations revealed that the hydrogen transfer proceeded via a concerted mechanism through a cyclic six-membered transition state analogous to that previously reported for the reaction of the N-dimethyl species Me2NH·BH3 and iPr2NâBH2. However, as a result of the presence of an electron donating methyl substituent on boron rather than on nitrogen, the process was more thermodynamically favorable and the activation energy barrier was reduced.
RESUMO
The catalyst loading is the key to control the molecular weight of the polymer in the iron-catalyzed dehydropolymerization of phosphine-borane adducts. Studies showed that the reaction proceeds through a chain-growth coordination-insertion mechanism.
RESUMO
Mild thermolysis of Lewis base stabilized phosphinoborane monomers R(1)R(2)P-BH2â NMe3 (R(1),R(2)=H, Ph, or tBu/H) at room temperature to 100 °C provides a convenient new route to oligo- and polyphosphinoboranes [R(1)R(2)P-BH2]n. The polymerization appears to proceed via the addition/head-to-tail polymerization of short-lived free phosphinoborane monomers, R(1)R(2)P-BH2. This method offers access to high molar mass materials, as exemplified by poly(tert-butylphosphinoborane), that are currently inaccessible using other routes (e.g. catalytic dehydrocoupling).
RESUMO
A simple and convergent synthetic strategy used to increase the diversity of the carbodicarbene ligand framework through incorporation of unsymmetrical pendant groups is reported. Structural analysis and spectroscopic studies of ligands and their Rhâ complexes are reported. Reactivity studies reveal carbodicarbenes as competent organocatalysts for amine methylation using CO2 as a synthon. A unique BH-activated boron-carbodicarbene complex was isolated as a reaction intermediate, providing mechanistic insight into the CO2 functionalization process.
RESUMO
The electronic and steric effects in the stoichiometric dehydrocoupling of secondary and primary phosphine-boranes H3B·PR2H [R = 3,5-(CF3)2C6H3; p-(CF3)C6H4; p-(OMe)C6H4; adamantyl, Ad] and H3B·PCyH2 to form the metal-bound linear diboraphosphines H3B·PR2BH2·PR2H and H3B·PRHBH2·PRH2, respectively, are reported. Reaction of [Rh(L)(η(6)-FC6H5)][BAr(F)4] [L = Ph2P(CH2)3PPh2, Ar(F) = 3,5-(CF3)2C6H3] with 2 equiv of H3B·PR2H affords [Rh(L)(H)(σ,η-PR2BH3)(η(1)-H3B·PR2H)][BAr(F)4]. These complexes undergo dehydrocoupling to give the diboraphosphine complexes [Rh(L)(H)(σ,η(2)-PR2·BH2PR2·BH3)][BAr(F)4]. With electron-withdrawing groups on the phosphine-borane there is the parallel formation of the products of B-P cleavage, [Rh(L)(PR2H)2][BAr(F)4], while with electron-donating groups no parallel product is formed. For the bulky, electron rich, H3B·P(Ad)2H no dehydrocoupling is observed, but an intermediate Rh(I) σ phosphine-borane complex is formed, [Rh(L){η(2)-H3B·P(Ad)2H}][BAr(F)4], that undergoes B-P bond cleavage to give [Rh(L){η(1)-H3B·P(Ad)2H}{P(Ad)2H}][BAr(F)4]. The relative rates of dehydrocoupling of H3B·PR2H (R = aryl) show that increasingly electron-withdrawing substituents result in faster dehydrocoupling, but also suffer from the formation of the parallel product resulting from P-B bond cleavage. H3B·PCyH2 undergoes a similar dehydrocoupling process, and gives a mixture of stereoisomers of the resulting metal-bound diboraphosphine that arise from activation of the prochiral P-H bonds, with one stereoisomer favored. This diastereomeric mixture may also be biased by use of a chiral phosphine ligand. The selectivity and efficiencies of resulting catalytic dehydrocoupling processes are also briefly discussed.
RESUMO
N-Heterocyclic carbenes (NHCs) have emerged as promising ligands for stabilizing metallic complexes, nanoclusters, nanoparticles (NPs) and surfaces. The carbon-metal bond between NHCs and metal atoms plays a crucial role in determining the resulting material's stability, reactivity, function, and electronic properties. Using Raman spectroscopy coupled with density functional theory calculations, we investigate the nature of carbon-metal bonding in NHC-silver and NHC-gold complexes as well as their corresponding NPs. While low wavenumbers are inaccessible to standard infrared spectroscopy, Raman detection reveals previously unreported NHC-Au/Ag bond-stretching vibrations between 154-196 cm-1. The computationally efficient r2SCAN-3c method allows an excellent correlation between experimental and predicted Raman spectra which helps calibrate an accurate description of NHC-metal bonding. While π-backbonding should stabilize the NHC-metal bond, conflicting reports for the presence and absence of π-backbonding are seen in the literature. This debate led us to further investigate experimental and theoretical results to ultimately confirm and quantify the presence of π-backbonding in these systems. Experimentally, an observed decrease in the NHC's CîN stretching due to the population of the π* orbital is a good indication for the presence of π-backbonding. Using energy decomposition analysis - natural orbitals for chemical valence (EDA-NOCV), our calculations concur and quantify π-backbonding in these NHC-bound complexes and NPs. Surprisingly, we observe that NPs are less stabilized by π-backbonding compared to their respective complexes-a result that partially explains the weaker NHC-NP bond. The protocol described herein will help optimize metal-carbon bonding in NHC-stabilized metal complexes, nanoparticles and surfaces.
RESUMO
Manufacturing custom three-dimensional (3D) carbon functional materials is of utmost importance for applications ranging from electronics and energy devices to medicine, and beyond. In lieu of viable eco-friendly synthesis pathways, conventional methods of carbon growth involve energy-intensive processes with inherent limitations of substrate compatibility. The yearning to produce complex structures, with ultra-high aspect ratios, further impedes the quest for eco-friendly and scalable paths toward 3D carbon-based materials patterning. Here, we demonstrate a facile process for carbon 3D printing at room temperature, using low-power visible light and a metal-free catalyst. Within seconds to minutes, this one-step photocatalytic growth yields rod-shaped microstructures with aspect ratios up to ~500 and diameters below 10 µm. The approach enables the rapid patterning of centimeter-size arrays of rods with tunable height and pitch, and of custom complex 3D structures. The patterned structures exhibit appealing luminescence properties and ohmic behavior, with great potential for optoelectronics and sensing applications, including those interfacing with biological systems.