Trace element speciation in sludge: a preliminary study to assess contamination levels in the sewage network.

The spreading of sewage sludge from wastewater treatment plants and various industries arouses the growing interest due to the contamination by trace elements. Sludges were collected from one sewage treatment plant and two industries in Dhaka City, Bangladesh to assess physicochemical parameters and total and fraction content of trace elements like Cr, Ni, Cu, As, Cd, Pb, Fe, Mn and Zn in sludges. We evaluated the bioavailability of theses metals by determining their speciation by sequential extraction, each metal being distributed among five fractions: exchangeable fraction, bound to carbonate fraction, Fe-Mn oxide bound fraction, organic matter bound fraction and residual fractions. We found that all the analyzed sludges had satisfactory properties from an agronomic quality point of view. The average concentration (mg/kg) of trace metals in sludge samples were in the following decreasing order Fe (12807) > Cr (200) > Mn (158) > Zn (132) > Cu (68.2) > Ni (42.5) > Pb (36.4) > As (35.1) > Cd (3.7). The results of the sequential extraction showed that Cr, Ni, Cu, Fe and Mn were largely associated with the residual fraction where As, Cd and Pb was dominantly associated with the exchangeable and carbonate bound fractions and Zn showed a considerable proportion in carbonate bound fraction. These results showed that regulations must take into account the bioavailability with regard to the characteristics of the agricultural soils on which sludge will be spread.

Light-focusing human micro-lenses generated from pluripotent stem cells model lens development and drug-induced cataract in vitro.

Cataracts cause vision loss and blindness by impairing the ability of the ocular lens to focus light onto the retina. Various cataract risk factors have been identified, including drug treatments, age, smoking and diabetes. However, the molecular events responsible for these different forms of cataract are ill-defined, and the advent of modern cataract surgery in the 1960s virtually eliminated access to human lenses for research. Here, we demonstrate large-scale production of light-focusing human micro-lenses from spheroidal masses of human lens epithelial cells purified from differentiating pluripotent stem cells. The purified lens cells and micro-lenses display similar morphology, cellular arrangement, mRNA expression and protein expression to human lens cells and lenses. Exposing the micro-lenses to the emergent cystic fibrosis drug Vx-770 reduces micro-lens transparency and focusing ability. These human micro-lenses provide a powerful and large-scale platform for defining molecular disease mechanisms caused by cataract risk factors, for anti-cataract drug screening and for clinically relevant toxicity assays.

PREVALENCE OF CHILDHOOD OBESITY AND UNDERNUTRITION AMONG URBAN SCHOOL CHILDREN IN BANGLADESH.

Despite the ongoing problems of undernutrition and infectious disease, obesity and overweight have become a major problem in developing countries, including Bangladesh. This cross-sectional study was undertaken to determine the prevalence of obesity, overweight and underweight among school children aged 6-12 years in Bangladesh. The study was conducted from June 2012 to May 2013 and the study sample comprised 1768 children (980 boys; 788 girls) from eight purposively selected schools in different areas of Dhaka city. Students were interviewed about their diet and physical activity, and anthropometric measurements were made, including height, weight, mid-upper-arm circumference (MUAC), waist circumference, hip circumference and body mass index (BMI). Undernutrition, overweight and obesity were defined using internationally accepted BMI cut-off points. Mean height, weight, BMI, MUAC, waist circumference and hip circumference values were found to be higher in boys than in girls, except at age 12 when these were found to be significantly higher in girls than in boys (p<0.05). The mean prevalence of overweight was 10.0% (boys 10.2%; girls 9.8%), and that of obesity 5.0% (boys 4.3%; girls 5.8%). The prevalence of underweight was 16.3% in boys and 12.7% in girls. The prevalence of underweight was significantly higher in poor than in rich children (22.1% vs 11.2%) and that of obesity was higher in rich than in poor children (9.9% vs 1.3%; p<0.001). A family history of obesity and hypertension emerged as a significant predictor of developing overweight and obesity (p<0.001). The data suggest that underweight and obesity co-exist in urban areas of Bangladesh, posing a challenge for the nutritional health of Bangladeshi children.

Alterations of serum macro-minerals and trace elements are associated with major depressive disorder: a case-control study.

BACKGROUND: Major depressive disorder (MDD) is a mixed disorder with the highly irregular course, inconsistent response to treatment and has no well-known mechanism for the pathophysiology. Major causes of depression are genetic, neurobiological, and environmental. However, over the past few years, altered serum levels of macro-minerals (MM) and trace elements (TE) have been recognized as major causative factors to the pathogenesis of many mental disorders. The purpose of this study was to determine the serum levels of MM (calcium and magnesium) and TE (copper, iron, manganese, selenium, and zinc) in MDD patients and find out their associations with depression risk. METHODS: This prospective case-control study recruited 247 patients and 248 healthy volunteers matched by age and sex. The serum levels of MM and TE were analyzed by atomic absorption spectroscopy (AAS). Statistical analysis was performed with independent sample t-tests and Pearson's correlation test. RESULTS: We found significantly decreased concentrations of calcium and magnesium, iron, manganese, selenium, and zinc in MDD patients compared with control subjects (p < 0.05). But the concentration of copper was significantly increased in the patients than control subjects (p < 0.05). Data obtained from different inter-element relations in MDD patients and control subjects strongly suggest that there is a disturbance in the element homeostasis. CONCLUSION: Our study suggests that altered serum concentrations of MM and TE are major contributing factors for the pathogenesis of MDD. Alterations of these elements in serum levels of MDD patients arise independently and they may provide a prognostic tool for the assessment of depression risk.

Dissipation kinetics, pre-harvest residue limits, and dietary risk assessment of the systemic fungicide metalaxyl in Swiss chard grown under greenhouse conditions.

The residual behavior of the systemic fungicide, metalaxyl, in Swiss chard cultivated at two different locations under greenhouse conditions was investigated using high-performance liquid chromatography coupled with an ultraviolet detector (HPLC-UVD). Samples were randomly collected over 14 days and extracted using acetonitrile, partitioned using solid sodium chloride, and a solid-phase extraction (SPE) NH2 cartridge was used for cleanup. The linearity over a concentration range 0.05-50 mg/L was excellent with a coefficient of determination (R2) of 0.9997. The recovery rate ranged from 77.05 to 88.92% with relative standard deviations (RSDs) ≤ 10.74, and the limits of detection (LOD) and quantification (LOQ) were 0.0033 and 0.01 mg/kg, respectively. The initial (2 h after application) deposits were 4.69 and 5.90 mg/kg for sites 1 and 2, respectively, which increased to 4.95 and 6.57 mg/kg, respectively, one day post-application, owing to the systemic properties of the fungicide. The dissipation half-life was 5.3 and 6.0 days for sites 1 and 2, respectively. The pre-harvest residue limit (PHRL) suggested that if 55.38 and 47.23 mg/kg was applied 10 days before harvest or 33.28 and 30.73 mg/kg was applied 5 days before harvest (for sites 1 and 2, respectively) then the concentration will fall below the maximum residue limit (MRL = 20.0 mg/kg) at the time of harvest. The dietary risk assessment, estimated as hazard quotient (RQ%), indicate that metalaxyl can be safely used in/on Swiss chard, with no hazardous effects expected for consumers.

Chromatographic determination, decline dynamic and risk assessment of sulfoxaflor in Asian pear and oriental melon.

The dissipation pattern of sulfoxaflor in Asian pear cultivated in an open field conditions and in oriental melon grown under plastic house conditions was each studied in two different locations. Residues in field-treated samples were determined using liquid chromatography coupled with an ultraviolet detector and confirmed by liquid chromatography-tandem mass spectrometry. A calibration curve for sulfoxaflor was linear over the concentration range 0.1-5.0 mg/L, with a coefficient of determination of 0.9999. The limits of detection and quantification (LOQ) were 0.007 and 0.02 mg/kg, respectively. Recoveries at three fortification levels (LOQ, 10 × LOQ and maximum residue limit) ranged from 70.5 to 86.2%, with a relative standard deviation ≤5.8%. The dissipation half-lives were 10.8 and 7.9 days in pear and 5.4 and 5.9 days in oriental melon, at sites 1 and 2, respectively. Based on a pre-harvest residue limit curve, it was predicted that, if the residues at 10 days before harvest in Asian pear are <0.54/0.61 mg/kg and those in oriental melon are <1.43/1.26 mg/kg, then the residue level will be below the maximum residue limit at harvest. Risk assessment at zero days showed a percentage acceptable daily intake of 10.80% in Asian pear and 1.77 and 1.55% in oriental melon, for sites 1 and 2, respectively. These values indicate that the fruits are safe for consumption.

Dynamic residual pattern of azoxystrobin in Swiss chard with contribution to safety evaluation.

This study aimed at quantifying the residual amount of azoxystrobin in Swiss chard samples grown under greenhouse conditions at two different locations (Gwangju and Naju, Republic of Korea). Samples were extracted with acetonitrile, separated by salting out, and subjected to purification by using solid-phase extraction. The analyte was identified using liquid chromatography-ultraviolet detection. The linearity of the calibration range was excellent with coefficient of determination 1.00. Recovery at three different spiking levels (0.1, 0.5, and 4 mg/kg) ranged between 82.89 and 109.46% with relative standard deviation <3. The limit of quantification, 0.01 mg/kg, was considerably much lower than the maximum residue limit (50 mg/kg) set by the Korean Ministry of Food and Drug Safety. The developed methodology was successfully used for field-treated leaves, which were collected randomly at 0-14 days following azoxystrobin application. The rate of disappearance in/on Swiss chard was ascribed to first-order kinetics with a half-life of 8 and 5 days, in leaves grown in Gwangju and Naju greenhouses, respectively. Risk assessments revealed that the acceptable daily intake percentage is substantially below the risk level of consumption at day 0 (in both areas), thus encouraging its safe consumption.

Residual dynamic and risk assessment of dimethomorph in Swiss chard grown at two different sites.

Residue analysis of dimethomorph in Swiss chard cultivated at two different locations under greenhouse conditions was conducted using high-performance liquid chromatography-ultraviolet detection and confirmed by tandem mass spectrometry. The randomly collected samples (over 14 days) were extracted with acetonitrile and purified using a Florisil solid-phase extraction cartridge. Linearity over a concentration range of 0.05-50.0 mg/L had an excellent coefficient of determination of 0.9996. Recovery rate ranged from 82.98 to 95.43% with relative standard deviations ≤5.12% and limits of detection and quantification of 0.003 and 0.01 mg/kg, respectively. The initial deposits [day 0 (2 h post-application)] were considerably lower (7.57 and 8.55 mg/kg for sites 1 and 2, respectively) than the maximum residue limit (30 mg/kg) set by the Korean Ministry of Food and Drug Safety. The dissipation half-life was approximately the same, being 5.0 and 5.1 days for sites 1 and 2, respectively. Risk assessment estimated as acceptable daily intake revealed a value of 0.084 or 0.094% (day 0) and 0.014% (10 days post-application), for sites 1 and 2, respectively. The values indicated that dimethomorph can be safely used on Swiss chard, with no hazardous effects expected for Korean consumers.

Simultaneous detection of sulfoxaflor and its metabolites, X11719474 and X11721061, in lettuce using a modified QuEChERS extraction method and liquid chromatography-tandem mass spectrometry.

An analytical method has been developed to quantify the residual levels of sulfoxaflor and its metabolites (X11719474 and X11721061) in/on cultivated lettuce grown under greenhouse conditions. Samples were extracted and purified using a quick, easy, cheap, effective, rugged, and safe 'QuEChERS' method (original version) following systematic method optimization and were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Good linearity with coefficient of determination ≥0.9930 was obtained and the limits of detection (LOD) and quantification (LOQ) were in the ranges of 0.003-0.006 and 0.01-0.02 mg/kg, respectively. The recovery rates of both the parent compound and its metabolites (fortified at 10 and 50× the LOQ) estimated from six replicates ranged between 81.9 and 115.5% with a relative standard deviation <12%. The validated method was applied to field-incurred samples (collected over 7 days) sprayed once or twice with a water-dispersible granule formulation. Notably, a substantial reduction in rate was observed after 3 days and the half-life was short, only 1.5 days. The developed method is simple and versatile and can be used for various leafy vegetables.

Dissipation kinetics and pre-harvest residue limit of pyriofenone in oriental melon (Cucumis melo Var. makuwa) grown under regulated climatic conditions.

A high-performance liquid chromatography-ultraviolet detection was used to estimate the disappearance rates as well as the pre-harvest residue limits of pyriofenone in oriental melon (Cucumis melo var. makuwa) grown under greenhouse conditions in two different locations (A and B) in Seongju, Republic of Korea. The identity of the compound in standard solution and representative field incurred samples was confirmed using liquid chromatography-tandem mass spectrometry. The method was validated in terms of linearity, limits of detection and quantification, accuracy (expressed as recovery) and precision (expressed as relative standard deviation) for accurate and precise quantitation. Notably, the residual levels of field incurred samples collected over days 0-10 post-application were below the maximum residue level (0.2 mg/kg) established by the Korean Ministry of Food and Drug Safety. Site A showed lower residue levels and a higher decline rate than site B, which might be attributed to seasonal variation (high temperature) and increased metabolic and enzyme profiling in the mature fruits. The half-lives were similar, 4.9 and 4.3 days, at sites A and B, respectively. Using the pre-harvest residue limit, we predicted the residue amounts at 10 and 5 days before harvest, which resulted in concentrations lower than the provisional maximum residue level at harvest time.

The disappearance rate and risk assessment of thiacloprid residues in Asian pear using liquid chromatography confirmed with tandem mass spectrometry.

This study was undertaken to quantify the residue levels and propose the dissipation kinetics of thiacloprid formulated as suspension concentrate in field-incurred Asian pears grown under two different open-field conditions. Samples were extracted with 20% distilled water in acetonitrile; partitioned with brine water and dichloromethane; and purified with a Florisil solid phase extraction cartridge. The analyte was identified with an LC ultraviolet detector, and field-incurred samples were confirmed using LC-MS/MS. The calibration curve was linear over the range 0.05-5.0 mg/L with a satisfactory coefficient of determination (R2 = 0.9994). The limits of detection and limits of quantification (LOQ) were 0.003 and 0.01 mg/kg, respectively. The recovery rate fortified to blank samples at LOQ, 10× LOQ, and the maximum residue limit (MRL) were between 73.7 and 86.2% with relative standard deviation ≤9.0%. The residual concentrations at both sites were considerably lower than the MRL (0.7 mg/kg) set by the Korean Ministry of Food Drug Safety, with biological half-lives of 5.0 and 7.4 days, for sites 1 and 2, respectively. From the pre-harvest residue limit curve, it was predicted that if the residues were <1.13 or 1.40 mg/kg 10 days before harvest, the residue level would be lower than the MRL during harvest. Risk assessment on day 0 showed an acceptable daily intake (%) of 13.0% and 11.0% for sites 1 and site 2, respectively, which indicates that the residual amounts are not hazardous to the Korean population.

Dissipation pattern and risk quotients assessment of amisulbrom in Korean melon cultivated in plastic house conditions.

Amisulbrom formulated as suspension concentrate was applied at the rate recommended for Korean melon to determine the dissipation pattern (at two different sites), the pre-harvest residue limit (PHRL), and risk assessments. Samples collected over 10 days were extracted using liquid-liquid extraction (LLE) and cleaned up with solid-phase extraction (SPE) Florisil cartridge. Residual concentrations were determined using liquid chromatography-ultraviolet detector (LC-UVD) and confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The standard showed good instrument response linearity with a correlation coefficient (R 2) = 0.9999, and the recovery ranged from 87.5 to 93.7%. The dissipation half-life calculated from two different sites were found to be 7.0 and 8.8 days for sites 1 and 2, respectively. A PHRL graph constructed from the data indicated that if the residue levels were less than 0.55-0.59 mg/kg 3 days before harvest or less than 0.61-0.74 mg/kg 7 days before harvest, then they would be lower than the maximum residue limits (MRLs) at harvest. Risk assessments showed that the risk quotient (RQ) was 4.39-3.47% at 0 day, declined to 1.53-1.63% at 10 days. Therefore, the current data indicate that the amisulbrom can be applied safely to Korean melon; hence, it is unlikely to induce adverse health effects in consumers.

Residual determination and risk assessment of buprofezin in plum (Prunus domestica) grown in open-field conditions following the application of three different formulations.

This study was conducted to characterize the residual level and perform a risk assessment on buprofezin formulated as an emulsifiable concentrate, wettable powder, and suspension concentrate over various treatment schedules in plum (Prunus domestica). The samples were extracted with an AOAC quick, easy, cheap, effective, rugged, and safe, 'QuEChERS', method after major modifications. As intrinsic interferences were observed in blank plum samples following dispersive-solid phase extraction (consisting of primary secondary amine and C18 sorbents), amino cartridges were used for solid-phase extraction. Analysis was carried out using liquid chromatography with diode array detection and confirmed by liquid chromatography-tandem mass spectrometry. The method showed excellent linearity with determination coefficient (R2 = 1) and satisfactory recoveries (at two spiking levels, 0.5 and 2.5 mg/kg) between 90.98 and 94.74% with relative standard deviation (RSD) ≤8%. The limit of quantification (0.05 mg/kg) was considerably lower than the maximum residue limit (2 mg/kg) set by the Codex Alimentarius. Absolute residue levels for emulsifiable concentrates were highest, perhaps owing to the dilution rate and adjuvant. Notably, all formulation residues were lower than the maximum residue limit, and safety data proved that the fruits are safe for consumers. Copyright © 2016 John Wiley & Sons, Ltd.

Analysis of mandipropamid residual levels through systematic method optimization against the matrix complexity of sesame leaves using HPLC/UVD.

An analytical method was developed to detect mandipropamid residues in sesame leaves using high-performance liquid chromatography-ultraviolet detection. Samples were extracted with acetonitrile and were prepurified using a solid-phase extraction (SPE) cartridge with an additional dispersive-SPE (d-SPE) sorbent application. The method was validated using an external calibration curve prepared using pure solvent. The linearity was excellent with determination coefficient = 1. The limits of detection and quantification were 0.003 and 0.01 mg/kg, respectively. Recoveries at three spiking levels - 0.1, 0.5, and 1.0 mg/kg - were in the range 80.3-90.7% with relative standard deviations <2%. This method was applied to field-treated samples collected from two different areas, Gwangju and Muan, in the Republic of Korea and the half-lives were similar, 5.10 and 5.41 days, respectively. The pre-harvest residue limit was also predicted for both sites. The proposed method is sensitive and able to quantify trace amounts of mandipropamid in leafy vegetables. The combination of SPE and d-SPE effectively removed the matrix components in sesame leaves. Copyright © 2015 John Wiley & Sons, Ltd.

Effects of light shading and climatic conditions on the metabolic behavior of flonicamid in red bell pepper.

The degradation behavior of flonicamid and its metabolites (4-trifluoromethylnicotinic acid (TFNA) and N-(4-trifluoromethylnicotinoyl) glycine (TFNG)) was evaluated in red bell pepper over a period of 90 days under glass house conditions, including high temperature, low and high humidity, and in a vinyl house covered with high density polyethylene light shade covering film (35 and 75%). Flonicamid (10% active ingredient) was applied (via foliar application) to all fruits, including those groups grown under normal conditions (glass house) or under no shade cover (vinyl house). Samples were extracted using a Quick, Easy, Cheap, Effective, Rugged, and Safe "QuEChERS" method and analyzed using liquid chromatography-tandem mass spectrometry (LC/MS/MS). The method performance, including linearity, recovery, limits of detection (LOD), and quantitation (LOQ), was satisfactory. Throughout the experimental period, the residual levels of flonicamid and TFNG were not uniform, whereas that of TFNA remained constant. The total sum of the residues (flonicamid and its metabolites) was higher in the vinyl house with shade cover than in the glass house, under various conditions. The total residues were significantly higher when the treatment was applied under high light shade (75%). The flonicamid half-life decreased from 47.2 days (under normal conditions) to 28.4 days (at high temperatures) in the glass house, while it increased from 47.9 days (no shade cover) to 66 days (75% light shading) in the vinyl house. High humidity leads to decreases in the total sum of flonicamid residues in red bell pepper grown in a glass house, because it leads to an increase in the rate of water loss, which in turn accelerates the volatilization of the pesticide. For safety reasons, it is advisable to grow red bell pepper under glass house conditions because of the effects of solar radiation, which increases the rate of flonicamid degradation into its metabolites.

A combination of solid-phase extraction and dispersive solid-phase extraction effectively reduces the matrix interference in liquid chromatography-ultraviolet detection during pyraclostrobin analysis in perilla leaves.

Perilla leaves contain many interfering substances; thus, it is difficult to protect the analytes during identification and integration. Furthermore, increasing the amount of sample to lower the detection limit worsens the situation. To overcome this problem, we established a new method using a combination of solid-phase extraction and dispersive solid-phase extraction to analyze pyraclostrobin in perilla leaves by liquid chromatography with ultraviolet absorbance detection. The target compound was quantitated by external calibration with a good determination coefficient (R(2) = 0.997). The method was validated (in triplicate) with three fortification levels, and 79.06- 89.10% of the target compound was recovered with a relative standard deviation <4. The limits of detection and quantification were 0.0033 and 0.01 mg/kg, respectively. The method was successfully applied to field samples collected from two different areas at Gwangju and Muan. The decline in the resiudue concentrations was best ascribed to a first-order kinetic model with half-lives of 5.7 and 4.6 days. The variation between the patterns was attributed to humidity.

Efficient removal of ciprofloxacin from aqueous solution using Zn-C battery derived graphene oxide enhanced by hydrogen bonding, electrostatic and π-π interaction.

In this study, graphene oxide (GO) derived from waste Zinc-Carbon (Zn-C) batteries was proposed for the efficient removal of antibiotics from the aqueous solution. Ciprofloxacin (CIP) antibiotic was selected as a typical contaminants. GO was prepared via an economical and environment-friendly route by using carbon rods from waste Zn-C batteries as the precursor. Characterization techniques were applied to determine the properties of as prepared GO. Effects of pH, contact time, and adsorbent dose on the adsorption were explored, and an optimum condition was established. Adsorption equilibrium was established in just 20 min for maximum removal of CIP (99.0%) at pH 5.7 for the adsorbent dose of 20 mg L-1 and at the initial concentration of CIP 2.0 mg L-1. The rapid and efficient removal of CIP was greatly influenced by the electrostatic attractions, pi-pi interactions and hydrogen bonding on the surface and edge of GO which was also proved by density functional theory (DFT). Langmuir model showed the best fit among the isotherm models and the calculated maximum adsorption capacity (qm) was 419.62 mg g-1 at 30°C. The kinetic studies also revealed that the adsorption process followed the pseudo-second-order model. The endothermic and spontaneous nature of adsorption was evaluated in thermodynamic studies.

Ultrafast and simultaneous removal of four tetracyclines from aqueous solutions using waste material-derived graphene oxide-supported cobalt-iron magnetic nanocomposites.

In this work, a graphene oxide-supported cobalt-iron oxide (GO/Co-Fe) magnetic nanocomposite was successfully synthesized using waste dry cells for the efficient and simultaneous removal of tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC), and doxycycline (DTC) from aqueous solutions. The GO/Co-Fe nanocomposite was thoroughly characterized using Fourier transform infrared spectroscopy, vibrating sample magnetometry, X-ray diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and zeta potential analysis. This multi-faceted characterization provided clean insights into the composition and properties of the synthesized nanocomposite. The adsorption of tetracyclines (TCs) was systematically investigated by assessing the influence of critical factors, such as adsorbent dosage, contact duration, initial pH of the solution, initial concentration, and temperature. The GO/Co-Fe adsorbent showed high removal efficiencies of 94.1% TC, 94.32% CTC, 94.22% OTC, and 96.94% DTC within 30 s contact period. The maximum removal efficiency of TCs was found at a low adsorbent dose of 0.15 g L-1. Notably, this superior removal efficiency was achieved at neutral pH and room temperature, demonstrating the adsorbent's efficacy under environmentally viable conditions. The kinetic studies demonstrated that the adsorption process was fitted satisfactorily with the pseudo-second-order model. Additionally, the adsorption behaviour of TCs on the GO/Co-Fe adsorbent was assessed by isotherm models, Langmuir and Freundlich. The experimental data followed the Langmuir isotherm, signifying a monolayer adsorption mechanism on the surface of the adsorbent. The adsorption capacities (qm) of GO/Co-Fe for TC, CTC, OTC and DTC were determined to be 64.10, 71.43, 72.46 and 99.01 mg g-1, respectively. Importantly, the GO/Co-Fe adsorbent showed reusability capabilities. The super magnetic properties of GO/Co-Fe made it easy to use for several cycles. These results clearly establish GO/Co-Fe as an exceptionally effective adsorbent for the removal of TCs from aqueous systems, highlighting its great potentiality in water treatment applications.

Method development of multi pesticide residue analysis in country beans collected from Dhaka, Bangladesh, and their dietary risk assessment.

The aim of the study was to develop a modified QuEChERS method coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the simultaneous determination of five multi-class pesticides in country beans collected from Dhaka, Bangladesh. Pesticides were extracted using ACN, and to minimize the co-extraction matrix, optimized d-SPE cleanup was done using sorbents (GCB, PSA, and C18). In the calibration range, the method showed excellent linearity with a correlation coefficient of R2 ≥ 0.9990 both in solvent- and matrix-matched calibration. For the selected pesticides, average recoveries (at four spiking levels (n = 5) of 10, 20, 100, and 200 µg/kg) of 70-100 % were achieved with relative standard deviations (RSDs) ≤ 9.5 %. The limit of detection (LOD) and limit of quantification (LOQ) ranged from 0.3333 to 1.3333 µg/kg and 1.0 to 4.0 µg/kg, respectively. The dietary risk assessment, in terms of hazard quotient (HQ), was calculated to assess consumers' health risks.

Spatiotemporal distribution, ecological risk assessment, and human health implications of currently used pesticide (CUP) residues in the surface water of Feni River, Bangladesh.

Spatiotemporal monitoring of pesticide residues in river water is urgently needed due to its negative environmental and human health consequences. The present study is to investigate the occurrence of multiclass pesticide residue in the surface water of the Feni River, Bangladesh, using an optimized salting-out assisted liquid-liquid microextraction (SALLME) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS). The optimized SALLME method was developed and validated following the SANTE/11312/2021 guidelines. A total of 42 water samples were collected and analyzed to understand the spatiotemporal distribution of azoxystrobin (AZ), buprofezin (BUP), carbofuran (CAR), pymetrozine (PYM), dimethoate (DMT), chlorantraniliprole (CLP), and difenoconazole (DFN). At four spike levels (n = 5) of 20, 40, 200, and 400 µg/L, the recovery percentages were satisfactory, ranging between 71.1 % and 107.0 % (RSD ≤13.8 %). The residues ranged from below the detection level (BDL) to 14.5 µg/L. The most frequently detected pesticide was DMT (100 %), followed by CLP (52.3809-57.1429), CAR (4.7619-14.2867), and PYM (4.7619-9.5238). However, AZ and BUP were below the detection limit in the analyzed samples of both seasons. Most pesticides and the highest concentrations were detected in March 2023, while the lowest concentrations were present in August 2023.Furthermore, ecological risk assessment based on the general-case scenario (RQm) and worst-case scenario (RQex) indicated a high (RQ > 1) risk to aquatic organisms, from the presence of PYM and CLP residue in river water. Human health risk via dietary exposure was estimated using the hazard quotient (HQ). Based on the detected residues, the HQ (<1) value indicated no significant health risk. This report provides the first record of pesticide residue occurrences scenario and their impact on the river environment of Bangladesh.