RESUMO
While the performance of metal halide perovskite light-emitting diodes (PeLEDs) has rapidly improved in recent years, their stability remains a bottleneck to commercial realization. Here, we show that the thermal stability of polymer hole-transport layers (HTLs) used in PeLEDs represents an important factor influencing the external quantum efficiency (EQE) roll-off and device lifetime. We demonstrate a reduced EQE roll-off, a higher breakdown current density of approximately 6 A cm-2, a maximum radiance of 760 W sr-1 m-2, and a longer device lifetime for PeLEDs using polymer HTLs with high glass-transition temperatures. Furthermore, for devices driven by nanosecond electrical pulses, a record high radiance of 1.23 MW sr-1 m-2 and an EQE of approximately 1.92% at 14.6 kA cm-2 are achieved. Thermally stable polymer HTLs enable stable operation of PeLEDs that can sustain more than 11.7 million electrical pulses at 1 kA cm-2 before device failure.
RESUMO
Ideal ring resonators are characterized by travelling-wave counter-propagating modes, but in practice travelling waves can only be realized under unidirectional operation, which has proved elusive. Here, we have designed and fabricated a monolithic quantum cascade ring laser coupled to an active waveguide that allows for robust, deterministic and controllable unidirectional operation. Spontaneous emission injection through the active waveguide enables dynamical switching between the clockwise and counterclockwise states of the ring laser with as little as 1.6% modulation of the electrical input. We show that this behavior stems from a perturbation in the bistable dynamics of the ring laser. In addition to switching and bistability, our novel coupler design for quantum cascade ring lasers offers an efficient mechanism for outcoupling and light detection.
RESUMO
While metal-halide perovskite light-emitting diodes (PeLEDs) hold the potential for a new generation of display and lighting technology, their slow operation speed and response time limit their application scope. Here, high-speed PeLEDs driven by nanosecond electrical pulses with a rise time of 1.2 ns are reported with a maximum radiance of approximately 480 kW sr-1 â m-2 at 8.3 kA cm-2 , and an external quantum efficiency (EQE) of 1% at approximately 10 kA cm-2 , through improved device configuration designs and material considerations. Enabled by the fast operation of PeLEDs, the temporal response provides access to transient charge carrier dynamics under electrical excitation, revealing several new electroluminescence quenching pathways. Finally, integrated distributed feedback (DFB) gratings are explored, which facilitate more directional light emission with a maximum radiance of approximately 1200 kWâ sr-1â m-2 at 8.5 kA cm-2 , a more than two-fold enhancement to forward radiation output.
RESUMO
The performance of lead-halide perovskite light-emitting diodes (LEDs) has increased rapidly in recent years. However, most reports feature devices operated at relatively small current densities (<500 mA cm-2 ) with moderate radiance (<400 W sr-1 m-2 ). Here, Joule heating and inefficient thermal dissipation are shown to be major obstacles toward high radiance and long lifetime. Several thermal management strategies are proposed in this work, such as doping charge-transport layers, optimizing device geometry, and attaching heat spreaders and sinks. Combining these strategies, high-performance perovskite LEDs are demonstrated with maximum radiance of 2555 W sr-1 m-2 , peak external quantum efficiency (EQE) of 17%, considerably reduced EQE roll-off (EQE > 10% to current densities as high as 2000 mA cm-2 ), and tenfold increase in operational lifetime (when driven at 100 mA cm-2 ). Furthermore, with proper thermal management, a maximum current density of 2.5 kA cm-2 and an EQE of ≈1% at 1 kA cm-2 are shown using electrical pulses, which represents an important milestone toward electrically driven perovskite lasers.