Pleurotus extract-mediated selenium and zinc nanoparticles exhibited improved yield of biofortified fruit bodies.

The current study was aimed for the generation of Pleurotus extracellular extract-mediated selenium and zinc-oxide nanoparticles (NPs). The Pleurotus djamor (PD) and Pleurotus sajor-caju (PSC) extracts were incubated with different concentrations of sodium selenate and zinc acetate to yield BioSeNPs and BioZnONPs. The NPs formation led to visual color change (brick-red and white for Se and Zn nanosols, respectively). The synthesized NPs were spherical with size of 124 and 68 nm and 84 and 91 nm for PD and PSC BioSeNPs and BioZnONPs respectively. The UV absorbance peaks were recorded at 293.2 and 292.2 nm and 365.9 and 325.5 nm for BioSeNPs and BioZnONPs derived from PD and PSC respectively. FT-IR spectroscopy indicated specific functional group adoration on metal-based NPs. On supplementation in straw, these NPs improved the fruit body yield besides enhancing their protein and Se/ Zn contents. These biofortified mushrooms could be potential dietary supplement/ nutraceutical.

Nano-delivery platforms for bacterial gene transformation: suitability and challenges.

Nano-scale particles (NPs) have gained increased interest as non-viral vectors for nucleic acid delivery due to their ability to penetrate through unabraded cell membranes. The previous studies performed have evaluated the nanomaterials for their microbial transformation proficiency but have not compared the relative efficacy. The present study aims to identify the most proficient nano-delivery vehicle among the chemically synthesized/functionalized non-metal oxide, metal/metal oxide, and carbon-based (carbon nanotube (CNT), graphene oxide (GO)) nanomaterial(s) (NMs) for the transformation of two gram-negative bacteria, i.e., Escherichia coli and Agrobacterium tumefaciens. The microscopy and spectroscopy studies helped to identify the interaction, adhesion patterns, transformation efficiencies, better delivery, and expression of the target gfp gene by use of NMs. Loading of pgfp on all NMs imparted protection to DNAse I attack except ZnO NPs with maximum by chitosan, layered double hydroxide (LDH), and GO NM-plasmid DNA conjugates. The CNTs and GO significantly enhanced the extra- and intra-cellular protein content, respectively, in both bacteria. However, GO and CNT significantly decreased the cell viability in a time-dependent manner while AuNPs exhibited negligible cell toxicity. Therefore, this study identified the comparative efficiency of metal/metal oxide, non-metal oxide, and carbon nanomaterials with AuNPs as the most biosafe while LDH and chitosan NPs being the most proficient alternative tools for the genetic transformation of gram-negative bacteria by simple incubation method.

Essential oils and their blends: mechanism of antibacterial activity and antibiofilm potential on food-grade maize starch packaging films.

Essential oils are highly complex volatile chemical compounds utilized for food preservation. The present study compares the antibacterial, and antibiofilm activities of essential oils (EOs) and their blends. Three EOs-basil, clove, and lemongrass-and their blends were evaluated against five food-borne bacterial pathogens. A concentration-dependent effect with maximum inhibition at minimum inhibitory concentration values was recorded while no synergistic activity was observed on blending of EOs. The mechanism of antibacterial action was identified as ROS burst, leakage of cytoplasmic content, and DNA degradation through fluorescence microscopy, electrical conductivity, and DNA cleavage studies. The role of EOs on biofilm growth was deciphered with lemongrass EO being most effective as it curbed biofilm formation on the surface of corn-starch packaging films. This work highlights the antibacterial action mechanism of EOs and their potential role in curtailing biofilm growth on food-grade packaging material.

Evaluating Plant Growth-Promoting Rhizobacteria to Improve the Productivity of Forage Pearl Millet.

India's livestock industry is grappling with a shortage of green fodder, necessitating concerted efforts to boost organized production and ensure a sufficient supply of high-quality forages, crucial for formulating nutritionally balanced, cost-effective, and rumen-healthy animal diets. Hence, this study was conducted to assess the plant growth-promoting characteristics of liquid microbial inoculants and their impact on the yield of forage pearl millet. The bacterial cultures utilized included Sphingobacterium sp., Stenotrophomonas maltophilia, and an isolate from vegetable cowpea, subsequently identified as Burkholderia seminalis. These cultures were initially characterized for their plant growth-promoting traits at different temperature and physiological conditions. All the bacterial cultures were found promising for PGPR traits over varied temperature conditions and the optimum activity was recorded at 40 °C, with tolerance to saline and drought stresses as well as wide pH and temperature ranges. A field experiment was conducted during kharif 2020 at Punjab Agricultural University, Ludhiana and Punjab Agricultural University, Regional Research Station, Bathinda, involving combinations of liquid microbial inoculants along with 100% Recommended Dose of Fertilizer (RDF). It was observed that the treatment including B. seminalis + S. maltophilia along with RDF yielded the highest green fodder and dry matter yield, In conclusion, it is evident that the utilization of these liquid microbial inoculants holds significant potential for playing a pivotal role in the integrated nutrient management of forage pearl millet, thereby contributing to heightened productivity and sustained soil health.

Elucidating the effect of TiO2 nanoparticles on mung bean rhizobia via in vitro assay: Influence on growth, morphology, and plant growth promoting traits.

Titanium dioxide nanoparticles (TiO2 NPs) are among the most commonly used nanomaterials and are most likely to end up in soil. Therefore, it is pertinent to study the interaction of TiO2 NPs with soil microorganisms. The present in vitro broth study evaluates the impacts of low-dose treatments (0, 1.0, 5.0, 10.0, 20.0, and 40.0 mg L-1 ) of TiO2 NPs on cell viability, morphology, and plant growth promoting (PGP) traits of rhizobia isolated from mung bean root nodule. Two types of TiO2 NPs, that is, mixture of anatase and rutile, and anatase alone were used in the study. These TiO2 NPs were supplemented in broth along with a multifunctional isolate (Bradyrhizobium sp.) and two reference cultures. The exposure of TiO2 (anatase+rutile) NPs at low concentrations (less than 20.0 mg L-1 ) enhanced the cell growth, and total soluble protein content, besides improving the phosphate solubilization, Indole-3-acetic acid (IAA) production, siderophore, and gibberellic acid production. The TiO2 (anatase) NPs enhanced exopolysaccharide (EPS) production by the test rhizobial cultures. The radical scavenging assay was performed to reveal the mode of action of the nano-TiO2 particles. The study revealed higher reactive oxygen species (ROS) generation by the TiO2 (anatase) NPs as compared with TiO2 (anatase+rutile) NPs. Exposure to TiO2 NPs also altered the morphology of rhizobial cells. The findings suggest that TiO2 NPs could act as promoters of PGP traits of PGP bacteria when applied at appropriate lower doses.

Breeding strategies for late blight resistance in potato crop: recent developments.

Late blight (LB) is a serious disease that affects potato crop and is caused by Phytophthora infestans. Fungicides are commonly used to manage this disease, but this practice has led to the development of resistant strains and it also poses serious environmental and health risks. Therefore, breeding for resistance development can be the most effective strategies to control late blight. Various Solanum species have been utilized as a source of resistance genes to combat late blight disease. Several potential resistance genes and quantitative resistance loci (QRLs) have been identified and mapped through the application of molecular techniques. Furthermore, molecular markers closely linked to resistance genes or QRLs have been utilized to hasten the breeding process. However, the use of single-gene resistance can lead to the breakdown of resistance within a short period. To address this, breeding programs are now being focused on development of durable and broad-spectrum resistant cultivars by combining multiple resistant genes and QRLs using advanced molecular breeding tools such as marker-assisted selection (MAS) and cis-genic approaches. In addition to the strategies mentioned earlier, somatic hybridization has been utilized for the development and characterization of interspecific somatic hybrids. To further broaden the scope of late blight resistance breeding, approaches such as genomic selection, RNAi silencing, and various genome editing techniques can be employed. This study provides an overview of recent advances in various breeding strategies and their applications in improving the late blight resistance breeding program.

Nanoparticle-Shielded dsRNA Delivery for Enhancing RNAi Efficiency in Cotton Spotted Bollworm Earias vittella (Lepidoptera: Nolidae).

The spotted bollworm Earias vittella (Lepidoptera: Nolidae) is a polyphagous pest with enormous economic significance, primarily affecting cotton and okra. However, the lack of gene sequence information on this pest has a significant constraint on molecular investigations and the formulation of superior pest management strategies. An RNA-seq-based transcriptome study was conducted to alleviate such limitations, and de novo assembly was performed to obtain transcript sequences of this pest. Reference gene identification across E. vittella developmental stages and RNAi treatments were conducted using its sequence information, which resulted in identifying transcription elongation factor (TEF), V-type proton ATPase (V-ATPase), and Glyceraldehyde -3-phosphate dehydrogenase (GAPDH) as the most suitable reference genes for normalization in RT-qPCR-based gene expression studies. The present study also identified important developmental, RNAi pathway, and RNAi target genes and performed life-stage developmental expression analysis using RT-qPCR to select the optimal targets for RNAi. We found that naked dsRNA degradation in the E. vittella hemolymph is the primary reason for poor RNAi. A total of six genes including Juvenile hormone methyl transferase (JHAMT), Chitin synthase (CHS), Aminopeptidase (AMN), Cadherin (CAD), Alpha-amylase (AMY), and V-type proton ATPase (V-ATPase) were selected and knocked down significantly with three different nanoparticles encapsulated dsRNA conjugates, i.e., Chitosan-dsRNA, carbon quantum dots-dsRNA (CQD-dsRNA), and Lipofectamine-dsRNA conjugate. These results demonstrate that feeding nanoparticle-shielded dsRNA silences target genes and suggests that nanoparticle-based RNAi can efficiently manage this pest.

Conversion of sheath blight susceptible indica and japonica rice cultivars into moderately resistant through expression of antifungal ß-1,3-glucanase transgene from Trichoderma spp.

Rice is an important food crop for three billion people worldwide. The crop is vulnerable to several diseases. Sheath blight caused by fungal pathogen Rhizoctonia solani is a significant threat to rice cultivation accounting for up to 50% yield losses. The pathogen penetrates leaf blades and sheaths, leading to plant necrosis; and major disease resistance gene against the pathogen is not available. This study describes development of sheath blight resistant transgenic indica and japonica rice cultivars through introduction of antifungal ß-1,3-glucanase transgene cloned from Trichoderma. The transgene integration and expression in transformed T0 rice plants was examined by PCR, RT-PCR, qRT-PCR demonstrating up to 5-fold higher expression as compared to non-transgenic plants. The bioassay of T0, T1 and homozygous T2 progeny plants with virulent R. solani isolate revealed that plants carrying high level of ß-1,3-glucanase expression displayed moderately resistant reaction to the pathogen. The optical micrographs of leaf sheath cells from moderately resistant plant after pathogen inoculation displayed presence of a few hyphae with sparse branching; on the contrary, pathogen hyphae in susceptible non-transgenic plant cells were present in abundance with profuse hyphal branching and forming prominent infection cushions. The disease severity in T2 progeny plants was significantly less as compared to non-transgenic plants confirming role of ß-1,3-glucanase in imparting resistance.

Agroinfiltration Mediated Scalable Transient Gene Expression in Genome Edited Crop Plants.

Agrobacterium-mediated transformation is one of the most commonly used genetic transformation method that involves transfer of foreign genes into target plants. Agroinfiltration, an Agrobacterium-based transient approach and the breakthrough discovery of CRISPR/Cas9 holds trending stature to perform targeted and efficient genome editing (GE). The predominant feature of agroinfiltration is the abolishment of Transfer-DNA (T-DNA) integration event to ensure fewer biosafety and regulatory issues besides showcasing the capability to perform transcription and translation efficiently, hence providing a large picture through pilot-scale experiment via transient approach. The direct delivery of recombinant agrobacteria through this approach carrying CRISPR/Cas cassette to knockout the expression of the target gene in the intercellular tissue spaces by physical or vacuum infiltration can simplify the targeted site modification. This review aims to provide information on Agrobacterium-mediated transformation and implementation of agroinfiltration with GE to widen the horizon of targeted genome editing before a stable genome editing approach. This will ease the screening of numerous functions of genes in different plant species with wider applicability in future.

Characterization and genome sequencing of three Aeromonas hydrophila-specific phages, CF8, PS1, and PS2.

Aeromonas hydrophila is an important finfish pathogen, besides being an opportunistic human pathogen. In the present study, the genomes of three A. hydrophila-specific phages, CF8, PS1, and PS2, were isolated, characterized and sequenced. Transmission electron microscopy showed that all three phages had typical Myoviridae morphology. The linear dsDNA genomes of CF8, PS1, and PS2 were 238,150 bp, 237,367 bp, and 240,447 bp in length, with a GC content of 42.2%, 38.8%, and 38.8%, respectively. The low sequence similarity (67.6% - 69.8% identity with 27.0% - 29.0% query coverage) to other phage genomes in the NCBI database indicated the novel nature of the CF8, PS1, and PS2 genomes. A total of 244, 247, and 250 open reading frames (ORFs) were predicted in the CF8, PS1, and PS2 genome, respectively. During the annotation process, functional predictions were made for 28-31 ORFs, while the rest were classified as "hypothetical proteins" with yet unknown functions. Genes for tRNAs were also detected in all phage genomes. As all three phages in the present study had a very narrow host range with lytic activity against only one strain of A. hydrophila, these phages could be good candidates for phage typing applications. Moreover, the endolysin- and lytic-transglycosylase-encoding genes could be used for recombinant cloning and expression of anti-microbial proteins.

Correction to: Characterization and genome sequencing of three Aeromonas hydrophila-specific phages, CF8, PS1, and PS2.

Authors would like to correct the incorrect version.

Conifer-Derived Metallic Nanoparticles: Green Synthesis and Biological Applications.

The use of metallic nanoparticles in engineering and biomedicine disciplines has gained considerable attention. Scientists are exploring new synthesis protocols of these substances considering their small size and lucrative antimicrobial potential. Among the most economical techniques of synthesis of metallic nanoparticles via chemical routes, which includes the use of chemicals as metal reducing agents, is considered to generate nanoparticles possessing toxicity and biological risk. This limitation of chemically synthesized nanoparticles has engendered the exploration for the ecofriendly synthesis process. Biological or green synthesis approaches have emerged as an effective solution to address the limitations of conventionally synthesized nanoparticles. Nanoparticles synthesized via biological entities obtained from plant extracts exhibit superior effect in comparison to chemical methods. Recently, conifer extracts have been found to be effective in synthesizing metallic nanoparticles through a highly regulated process. The current review highlights the importance of conifers and its extracts in synthesis of metallic nanoparticles. It also discusses the different applications of the conifer extract mediated metallic nanoparticles.

Novel trends to revolutionize preservation and packaging of fruits/fruit products: microbiological and nanotechnological perspectives.

Fruit preservation and packaging have been practiced since ages to maintain the constant supply of seasonal fruits over lengthened periods round the year. However, health and safety issues have attracted attention in recent decades. The safety and quality assurance of packaged fruits/fruit products are vital concerns in present day world-wide-integrated food supply chains. The growing demand of minimally or unprocessed packaged fruits has further aggravated the safety concerns which fuelled in extensive research with objectives to develop novel techniques of food processing, preservation, and packaging as well as for rapid, accurate, and early detection of contaminant products/microbes. Nevertheless, fruits and fruit-based products have yet to observe a panoramic introduction. Tropics and subtropics are the stellar producers of a variety of fruits; majority if not all is perishable and prone to postharvest decay. This evoked the opportunity to critically review the global scenario of emerging and novel techniques for fruit preservation and packaging, hence providing insight for their future implementation. This review would survey key nanotechnology innovations applied in preservation, packaging, safety, and storage of fruits and fruit-based products. The challenges and pros and cons of wider application of these innovative techniques, their commercial potential, and consumer acceptability have also been discussed.

Effect of selenium and zinc biofortification on the biochemical parameters of Pleurotus spp. under submerged and solid-state fermentation.

BACKGROUND: Pleurotus has a remarkable nutritional and nutraceutical profile due to mineral mobilization and accumulation abilities from the substrate. The present study aimed to observe the effect of single and dual supplementations Se and Zn on biochemical parameters of P. florida, P. sajor caju and P. djamor. Also, the bioaccumulation of the trace elements in fortified mushrooms was estimated. METHODS: Biomass production and radial growth rate were observed on Se and Zn supplemented broth and agar based medium. Furthermore, the influence of Se and Zn supplementation was recorded on the fruit body yield. The colorimetric assays were employed to estimate total soluble protein, total phenol and total flavonoid contents. The antioxidant activity was assayed as DPPH radical scavenging test. While, ICP-AES was performed to estimate the variation in the Zn and Se content of the fruit bodies. RESULTS: The Se supplementation at low rate resulted in improvement in the radial growth rate and biomass production for P. sajor caju. For solid-state fermentation, a better yield was obtained with inorganic salt supplementation in comparison to organically enriched Se straw. The maximum total soluble protein content and total flavonoid content were observed in fruit bodies of P. sajor caju at 4 mg L -1 of Se and Se-Zn respectively. Pleurotus djamor exhibited the highest total phenolic content on Zn supplementation (10 mg L-1). Improved antioxidant potential was recorded with dual supplementations. Salt supplementations caused shrinkage, distortion of the fungal hyphae, and decreased basidiospores with significant amelioration in elemental composition in fortified mushrooms. CONCLUSION: The inorganic salt supplementation increased the biochemical potential of Pleurotus spp. in comparison to organically enriched substrate which could further be used for the development of dietary supplements.

In vitro induction and selection of mutants obtained through gamma irradiation with improved processing traits in potato (Solanum tuberosum L.).

PURPOSE: This manuscript aimed for the generation of γ-irradiation derived mutants of potato genotype PAU/RR-1501 possessing desirable processing traits. MATERIALS AND METHODS: Nodal cuttings from virus-free explants were established on basal MS medium and irradiated with different doses (0, 5, 10 and 20 Gy) of γ-irradiation. The 5 and 10 Gy treated plantlets were multiplied and used for micro-tuber induction. Harvested micro-tubers were planted in pots for the selection and evaluation of mutants in M1V2 generation. RESULTS: Four weeks post-treatment, plantlets (5 Gy) showed enhanced growth as compared to the control while 20 Gy treatment exhibited completely ceased shoot growth. The highest number and weight of mini-tubers per plant was recorded for 10 Gy followed by 5 Gy treatment as compared to control. The γ-irradiation treatments caused changes in the skin color and shape of M1V2 tubers. CONCLUSION: Under the 5 Gy treatment 49.9% of clones produced exhibited cream and 8.53% brown skin color. Nine putative mutants were identified in genotype PAU/RR-1501 exhibiting promising processing traits.

In-Silico Identification, Characterization and Expression Analysis of Genes Involved in Resistant Starch Biosynthesis in Potato (Solanum tuberosum L.) Varieties.

Potato (Solanum tuberosum L.), an important horticultural crop is a member of the family Solanaceae and is mainly grown for consumption at global level. Starch, the principal component of tubers, is one of the significant elements for food and non-food-based applications. The genes associated with biosynthesis of starch have been investigated extensively over the last few decades. However, a complete regulation pathway of constituent of amylose and amylopectin are still not deeply explored. The current in-silico study of genes related to amylose and amylopectin synthesis and their genomic organization in potato is still lacking. In the current study, the nucleotide and amino acid arrangement in genome and twenty-two genes linked to starch biosynthesis pathway in potato were analysed. The genomic structure analysis was also performed to find out the structural pattern and phylogenetic relationship of genes. The genome mining and structure analysis identified ten specific motifs and phylogenetic analysis of starch biosynthesis genes divided them into three different clades on the basis of their functioning and phylogeny. Quantitative real-time PCR (qRT-PCR) of amylose biosynthesis pathway genes in three contrast genotypes revealed the down-gene expression that leads to identify potential cultivar for functional genomic approaches. These potential lines may help to achieve higher content of resistant starch.

Interactive effects of long-term management of crop residue and phosphorus fertilization on wheat productivity and soil health in the rice-wheat.

In the context of degradation of soil health, environmental pollution, and yield stagnation in the rice-wheat system in the Indo-Gangetic Plains of South Asia, an experiment was established in split plot design to assess the long-term effect of crop residue management on productivity and phosphorus requirement of wheat in rice-wheat system. The experiment comprised of six crop residue management practices as the main treatment factor with three levels (0, 30 and 60 kg P2O5 ha-1) of phosphorus fertilizer as sub-treatments. Significant improvement in soil aggregation, bulk density, and infiltration rate was observed under residue management (retention/incorporation) treatments compared to residue removal or residue burning. Soil organic carbon (SOC), available nutrient content (N, P, and K), microbial count, and enzyme activities were also significantly higher in conservation tillage and residue-treated plots than without residue/burning treatments. The residue derived from both crops when was either retained/incorporated improved the soil organic carbon (0.80%) and resulted in a significant increase in SOC (73.9%) in the topsoil layer as compared to the conventional practice. The mean effect studies revealed that crop residue management practices and phosphorus levels significantly influenced wheat yield attributes and productivity. The higher grain yield of wheat was recorded in two treatments, i.e. the basal application of 60 kg P2O5 ha-1 without residue incorporation and the other with half the P-fertilizer (30 kg P2O5 ha-1) with rice residue only. The grain yield of wheat where the rice and wheat residue were either retained/incorporated without phosphorus application was at par with 30 and 60 kg P2O5ha-1. Phosphorus levels also significantly affected wheat productivity and available P content in the soil. Therefore, results suggested that crop residue retention following the conservation tillage approach improved the yield of wheat cultivated in the rice-wheat cropping system.

Cellulase-immobilized chitosan-coated magnetic nanoparticles for saccharification of lignocellulosic biomass.

Devising and consolidating cost-effective and greener technologies for sustainable energy production pertain to some of the most pressing needs of the present times. Bioconversion of abundantly available lignocellulosic materials into fermentable sugars to produce biofuels involves the cost-extensive requirement of hydrolytic enzymes called cellulases. Cellulases are highly selective and eco-friendly biocatalysts responsible for deconstruction of complex polysaccharides into simple sugars. Currently, immobilization of cellulases is being carried out on magnetic nanoparticles functionalized with suitable biopolymers such as chitosan. Chitosan, a biocompatible polymer, exhibits high surface area, chemical/thermal stability, functionality, and reusability. The chitosan-functionalized magnetic nanocomposites (Ch-MNCs) present a nanobiocatalytic system that enables easy retrieval, separation, and recycling of cellulases, thereby offering a cost-effective and sustainable approach for biomass hydrolysis. These functional nanostructures show enormous potential owing to certain physicochemical and structural features that have been discussed in a comprehensive manner in this review. It provides an insight into the synthesis, immobilization, and application of cellulase immobilized Ch-MNCs for biomass hydrolysis. This review aims to bridge the gap between sustainable utilization and economic viability of employing replenishable agro-residues for cellulosic ethanol production by incorporating the recently emerging nanocomposite immobilization approach.

Pleurotus florida mediated biosynthesis of nanoparticles and biofortification.

The mycosynthesis of biogenic NPs using nanotechnology technique is an ecofriendly and economical approach. The extracellular mycelial extract of the Pleurotus florida fungi were used to biosynthesized Zn, Cu and Fe NPs using zinc sulphate, zinc chloride, copper sulphate, copper chloride ferrous sulphate and ferric chloride, precursor salts at 1.0 mM concentration. The color of reaction mixture was changed from (transparent to white, blue to green and yellow to brown) for Zn, Cu and Fe NPs during incubation period of 96 h at 25 ± 2 °C, indicating synthesis of NPs. Spectroscopy and microscopy techniques were used for the characterization of newly synthesized biogenic NPs. Whereas, the ICP-MS analysis revealed that copper chloride precursor salts produced high concentration of Cu biogenic NPs, followed by zinc chloride derived Zn NPs. The fortification with the biogenic NPs of Pleurotus florida mycelium exhibited high accumulation of the trace elements as compared to non-fortified mycelium. Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-023-01307-z.