RESUMO
Nanoenabled products (NEPs) have numerous outdoor uses in construction, transportation or consumer scenarios, and there is evidence that their fragments are released in the environment at low rates. We hypothesized that the lower surface availability of NEPs fragment reduced their environmental effects with respect to pristine nanomaterials. This hypothesis was explored by testing fragments generated by intentional micronisation ("the SUN approach"; Nowack et al. Meeting the Needs for Released Nanomaterials Required for Further Testing: The SUN Approach. Environmental Science & Technology, 2016 (50), 2747). The NEPs were composed of four matrices (epoxy, polyolefin, polyoxymethylene, and cement) with up to 5% content of three nanomaterials (carbon nanotubes, iron oxide, and organic pigment). Regardless of the type of nanomaterial or matrix used, it was observed that nanomaterials were only partially exposed at the NEP fragment surface, indicating that mostly the intrinsic and extrinsic properties of the matrix drove the NEP fragment toxicity. Ecotoxicity in multiple assays was done covering relevant media from terrestrial to aquatic, including sewage treatment plant (biological activity), soil worms (Enchytraeus crypticus), and fish (zebrafish embryo and larvae and trout cell lines). We designed the studies to explore the possible modulation of ecotoxicity by nanomaterial additives in plastics/polymer/cement, finding none. The results support NEPs grouping by the matrix material regarding ecotoxicological effect during the use phase. Furthermore, control results on nanomaterial-free polymer fragments representing microplastic had no significant adverse effects up to the highest concentration tested.
Assuntos
Nanoestruturas , Nanotubos de Carbono , Animais , Ecotoxicologia , Meio Ambiente , PlásticosRESUMO
Gunshot residues (GSRs) from different types of ammunition have been characterized using a new method based on single-particle inductively coupled plasma time-of-flight mass spectrometry (sp-ICP-TOF-MS). This method can analyze thousands of particles per minute enabling rapid sample screening for GSR detection with minimal sample preparation. GSR particles are multi-elemental nanoparticles that are mainly defined by the elements lead, barium, and antimony. Sp-ICP-TOF-MS was also used to identify other elements contained in GSR particles while standard particle classification protocols do not consider the complexities of GSR compositions and can therefore miss out on valuable information. The proposed method can be used to support existing GSR detection methods, especially when lead-free, antimony-free, or tagged ammunition has been used; it also provides a possibility for multi-elemental fingerprinting of GSR particles.
RESUMO
Nanogeochemistry is an emerging focus area recognizing the role of nanoparticles in Earth systems. Engineered nanotechnology has cultivated advanced analytical techniques that are also applicable to nanogeochemistry. Single particle inductively coupled plasma ICP-time-of-flight-mass spectrometry (ICP-TOF-MS) promises a significant step forward, as time-of-flight mass analyzers enable simultaneous quantification of the entire atomic mass spectrum (â¼7-250 m/z +). To demonstrate the utility of this approach, samples were collected and analyzed from a large, boreal river, and its surrounding tributaries. These samples provided us with a diversity of particle compositions and morphologies, while their interconnected nature allowed for an examination of the various nanogeochemical processes present in this system. To further expand on this effort, we combined this high-throughput technique with AF4-ICPMS, focusing on major carriers of trace elements. Using spICP-TOF-MS, Al, Si, and Fe were grouped into classes having all combinations of one or more of these elements. Particle-by-particle ICP-TOF-MS analysis found chemically heterogeneous populations, indicating the predominance of diverse mineralogy or heteroaggregates. The importance of suspended Fe and Mn for the speciation of Pb was observed by single particle ICP-TOF-MS and complemented by AF4-ICPMS analysis of dissolved organic matter and nanoparticulate Fe/Mn. Our study exploits the combination of spICP-TOF-MS and AF4-ICP-MS for studying isotopic and elemental ratios (mineralogy) of individual nanoparticles, which opens the door to further explore the mechanisms of colloid facilitated transport of trace elements.
RESUMO
Emissions of Ce from anthropogenic activities (anthropogenic Ce) into urban wastewater systems and the environment result from its widespread industrial use (abrasives, catalysts, nanotechnology). Because Ce in sewage sludge can also be of geogenic origin, the quantification of anthropogenic Ce in sewage sludge remains elusive. In this study, we evaluated the suitability of Ce oxidation state and rare earth element (REE) patterns for the quantification of anthropogenic Ce fractions in sewage sludge. A diverse set of soil samples served to gain baseline information on geogenic Ce. Geogenic Ce in the soils was characterized by high Ce(III) fractions (≥70%) and their REE patterns were comparable to the REE patterns of the upper continental crust. The sewage sludges contained on average â¼80% Ce(IV) (range 18-108%), pointing to the importance of anthropogenic inputs of Ce(IV). The quantification of the anthropogenic Ce fraction based on Ce oxidation state, however, was associated with considerable uncertainty because geogenic and anthropogenic Ce cannot exclusively be assigned to Ce(III) and Ce(IV), respectively. The REE patterns of most sewage sludges indicated a clear enrichment of Ce compared to heavier REE. Based on the assumption that the industrially used Ce is free of (most) other REE, we estimated the fraction of anthropogenic Ce in the sludges based on individual Ce/REE ratios. For the individual sludges the anthropogenic contributions were very variable (10-100%) but consistent fractions were obtained for individual sludges when calculated based on Ce/Dy (dysprosium), Ce/Er (erbium) and Ce/Eu (europium) ratios. Electron microscopy analysis of sludges dominated by anthropogenic Ce revealed that the Ce was mostly contained in nanoscale particles devoid of elements characteristic of Ce-bearing minerals. Thus, anthropogenic Ce contents derived from REE patterns may be used to validate current mass flow models for engineered CeO2 nanoparticles.
RESUMO
The implementation and enforcement of product labeling obligation as required, for example, by the cosmetic product regulation, needs simple and precise validated analytical methods. This also applies to the analysis of nanoparticles in products such as cosmetics. However, the provision of such methods is often hampered by inaccurate sizing due to unwanted nanoparticle changes, interference of matrix components with sizing and interactions between nanoparticles and analytical instrumentation. It is, therefore, necessary to develop appropriate sample preparation methods that preserve NP properties and reduce or remove matrix compounds that interfere with sizing. Further, accurate particle size analysis of samples containing unknown and possibly multiple nanoparticulate constituents is needed. In this study, we evaluated three sample preparation methods to identify and quantify TiO2 nanoparticles in sunscreens. Specifically, we used a combination of ultracentrifugation and hexane washing, thermal destruction of the matrix, and surfactant assisted particle extraction. The method accuracy was assessed by two internal reference samples: pristine TiO2 nanoparticles (NM104) and similar TiO2 nanoparticles dispersed in a sunscreen matrix. The PSDs were determined using an asymmetrical flow field-flow fractionation hyphenated with multi-angle light scattering and inductively coupled plasma-mass spectroscopy. Particle sizing was based on size calibration of the particle retention time in the AF4. Computation of radius of gyration from MALS data was used as an orthogonal particle sizing approach to verify ideal elution and particle size data from the AF4 calibration. Among the three tested sample preparation methods surfactant assisted particle extraction revealed TiO2 nanoparticle recoveries of above 90% and no increase in particle size due to sample preparation was observed. Finally, the sample preparation methods were applied to two commercial sunscreen samples revealing the existence of TiO2-NP < 100 nm. Conclusively, the surfactant assisted particle extraction method can provide valid data for TiO2-NPs in sunscreen and possibly for cosmetic samples of similar matrix.
Assuntos
Nanopartículas/análise , Protetores Solares/química , Titânio/análise , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
NanoImpactNet is a European Commission Framework Programme 7 (FP7) funded project that provides a forum for the discussion of current opinions on nanomaterials in relation to human and environmental issues. In September 2008, in Zurich, a NanoImpactNet environmental workshop focused on three key questions: 1. What properties should be characterised for nanomaterials used in environmental and ecotoxicology studies? 2. What reference materials should be developed for use in environmental and ecotoxicological studies? 3. Is it possible to group different nanomaterials into categories for consideration in environmental studies? Such questions have been, at least partially, addressed by other projects/workshops especially in relation to human health effects. Such projects provide a useful basis on which this workshop was based, but in this particular case these questions were reformulated in order to focus specifically on environmental studies. The workshop participants, through a series of discussion and reflection sessions, generated the conclusions listed below. The physicochemical characterisation information identified as important for environmental studies included measures of aggregation/agglomeration/dispersability, size, dissolution (solubility), surface area, surface charge, surface chemistry/composition, with the assumption that chemical composition would already be known. There is a need to have test materials for ecotoxicology, and several substances are potentially useful, including TiO(2) nanoparticles, polystyrene beads labelled with fluorescent dyes, and silver nanoparticles. Some of these test materials could then be developed into certified reference materials over time. No clear consensus was reached regarding the classification of nanomaterials into categories to aid environmental studies, except that a chemistry-based classification system was a reasonable starting point, with some modifications. It was suggested, that additional work may be required to derive criteria that can be used to generate such categories, that would also include aspects of the material structure and physical behaviour.