Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 23
Filtrar
1.
Nucleic Acids Res ; 44(2): e10, 2016 Jan 29.
Artigo em Inglês | MEDLINE | ID: mdl-26358811

RESUMO

In this paper, we asked if it is possible to identify the best primers and reaction conditions based on improvements in reaction speed when optimizing isothermal reactions. We used digital single-molecule, real-time analyses of both speed and efficiency of isothermal amplification reactions, which revealed that improvements in the speed of isothermal amplification reactions did not always correlate with improvements in digital efficiency (the fraction of molecules that amplify) or with analytical sensitivity. However, we observed that the speeds of amplification for single-molecule (in a digital device) and multi-molecule (e.g. in a PCR well plate) formats always correlated for the same conditions. Also, digital efficiency correlated with the analytical sensitivity of the same reaction performed in a multi-molecule format. Our finding was supported experimentally with examples of primer design, the use or exclusion of loop primers in different combinations, and the use of different enzyme mixtures in one-step reverse-transcription loop-mediated amplification (RT-LAMP). Our results show that measuring the digital efficiency of amplification of single-template molecules allows quick, reliable comparisons of the analytical sensitivity of reactions under any two tested conditions, independent of the speeds of the isothermal amplification reactions.


Assuntos
Primers do DNA/química , RNA Viral/química , Reação em Cadeia da Polimerase em Tempo Real/métodos , Reação em Cadeia da Polimerase Via Transcriptase Reversa/métodos , Regiões 5' não Traduzidas/genética , Primers do DNA/síntese química , Hepacivirus/química , Hepacivirus/genética , Reação em Cadeia da Polimerase em Tempo Real/instrumentação , Reação em Cadeia da Polimerase Via Transcriptase Reversa/instrumentação , Sensibilidade e Especificidade , Fatores de Tempo
2.
Proc Natl Acad Sci U S A ; 111(27): 9768-73, 2014 Jul 08.
Artigo em Inglês | MEDLINE | ID: mdl-24965364

RESUMO

This paper describes a microfluidics-based workflow for genetically targeted isolation and cultivation of microorganisms from complex clinical samples. Data sets from high-throughput sequencing suggest the existence of previously unidentified bacterial taxa and functional genes with high biomedical importance. Obtaining isolates of these targets, preferably in pure cultures, is crucial for advancing understanding of microbial genetics and physiology and enabling physical access to microbes for further applications. However, the majority of microbes have not been cultured, due in part to the difficulties of both identifying proper growth conditions and characterizing and isolating each species. We describe a method that enables genetically targeted cultivation of microorganisms through a combination of microfluidics and on- and off-chip assays. This method involves (i) identification of cultivation conditions for microbes using growth substrates available only in small quantities as well as the correction of sampling bias using a "chip wash" technique; and (ii) performing on-chip genetic assays while also preserving live bacterial cells for subsequent scale-up cultivation of desired microbes, by applying recently developed technology to create arrays of individually addressable replica microbial cultures. We validated this targeted approach by cultivating a bacterium, here referred to as isolate microfluidicus 1, from a human cecal biopsy. Isolate microfluidicus 1 is, to our knowledge, the first successful example of targeted cultivation of a microorganism from the high-priority group of the Human Microbiome Project's "Most Wanted" list, and, to our knowledge, the first cultured representative of a previously unidentified genus of the Ruminococcaceae family.


Assuntos
Marcação de Genes , Intestinos/microbiologia , Microbiota , Técnicas Analíticas Microfluídicas , Humanos , Dados de Sequência Molecular
3.
Angew Chem Int Ed Engl ; 53(31): 8088-8092, 2014 Jul 28.
Artigo em Inglês | MEDLINE | ID: mdl-24889060

RESUMO

We experimentally monitored, at the single-molecule level, the competition among reverse transcription, exponential amplification (RT-LAMP), and linear degradation (restriction enzymes) starting with hepatitis C viral RNA molecules. We found significant heterogeneity in the rate of single-molecule amplification; introduction of the restriction enzymes affected both the rate and the "fate" (the binary outcome) of single-molecule amplification. While end-point digital measurements were primarily sensitive to changes in fate, the bulk real-time kinetic measurements were dominated by the rate of amplification of the earliest molecules, and were not sensitive to fate of the rest of the molecules. We show how this competition of reactions can be used for rapid HCV genotyping with either digital or bulk readout. This work advances our understanding of single-molecule dynamics in reaction networks and may help bring genotyping capabilities out of clinical labs and into limited-resource settings.


Assuntos
Genótipo , Hepacivirus/genética , RNA Viral/genética
4.
Anal Chem ; 85(22): 11129-36, 2013 Nov 19.
Artigo em Inglês | MEDLINE | ID: mdl-24199852

RESUMO

Quantitative bioanalytical measurements are commonly performed in a kinetic format and are known to not be robust to perturbation that affects the kinetics itself or the measurement of kinetics. We hypothesized that the same measurements performed in a "digital" (single-molecule) format would show increased robustness to such perturbations. Here, we investigated the robustness of an amplification reaction (reverse-transcription loop-mediated amplification, RT-LAMP) in the context of fluctuations in temperature and time when this reaction is used for quantitative measurements of HIV-1 RNA molecules under limited-resource settings (LRS). The digital format that counts molecules using dRT-LAMP chemistry detected a 2-fold change in concentration of HIV-1 RNA despite a 6 °C temperature variation (p-value = 6.7 × 10(-7)), whereas the traditional kinetic (real-time) format did not (p-value = 0.25). Digital analysis was also robust to a 20 min change in reaction time, to poor imaging conditions obtained with a consumer cell-phone camera, and to automated cloud-based processing of these images (R(2) = 0.9997 vs true counts over a 100-fold dynamic range). Fluorescent output of multiplexed PCR amplification could also be imaged with the cell phone camera using flash as the excitation source. Many nonlinear amplification schemes based on organic, inorganic, and biochemical reactions have been developed, but their robustness is not well understood. This work implies that these chemistries may be significantly more robust in the digital, rather than kinetic, format. It also calls for theoretical studies to predict robustness of these chemistries and, more generally, to design robust reaction architectures. The SlipChip that we used here and other digital microfluidic technologies already exist to enable testing of these predictions. Such work may lead to identification or creation of robust amplification chemistries that enable rapid and precise quantitative molecular measurements under LRS. Furthermore, it may provide more general principles describing robustness of chemical and biological networks in digital formats.


Assuntos
Telefone Celular , HIV-1/genética , Microfluídica/métodos , Técnicas de Amplificação de Ácido Nucleico/métodos , RNA Viral/análise , Reação em Cadeia da Polimerase Via Transcriptase Reversa/métodos , HIV-1/isolamento & purificação , Humanos , Cinética , RNA Viral/genética , Temperatura
5.
Anal Chem ; 85(3): 1540-6, 2013 Feb 05.
Artigo em Inglês | MEDLINE | ID: mdl-23324061

RESUMO

Here we used a SlipChip microfluidic device to evaluate the performance of digital reverse transcription-loop-mediated isothermal amplification (dRT-LAMP) for quantification of HIV viral RNA. Tests are needed for monitoring HIV viral load to control the emergence of drug resistance and to diagnose acute HIV infections. In resource-limited settings, in vitro measurement of HIV viral load in a simple format is especially needed, and single-molecule counting using a digital format could provide a potential solution. We showed here that when one-step dRT-LAMP is used for quantification of HIV RNA, the digital count is lower than expected and is limited by the yield of desired cDNA. We were able to overcome the limitations by developing a microfluidic protocol to manipulate many single molecules in parallel through a two-step digital process. In the first step we compartmentalize the individual RNA molecules (based on Poisson statistics) and perform reverse transcription on each RNA molecule independently to produce DNA. In the second step, we perform the LAMP amplification on all individual DNA molecules in parallel. Using this new protocol, we increased the absolute efficiency (the ratio between the concentration calculated from the actual count and the expected concentration) of dRT-LAMP 10-fold, from ∼2% to ∼23%, by (i) using a more efficient reverse transcriptase, (ii) introducing RNase H to break up the DNA:RNA hybrid, and (iii) adding only the BIP primer during the RT step. We also used this two-step method to quantify HIV RNA purified from four patient samples and found that in some cases, the quantification results were highly sensitive to the sequence of the patient's HIV RNA. We learned the following three lessons from this work: (i) digital amplification technologies, including dLAMP and dPCR, may give adequate dilution curves and yet have low efficiency, thereby providing quantification values that underestimate the true concentration. Careful validation is essential before a method is considered to provide absolute quantification; (ii) the sensitivity of dLAMP to the sequence of the target nucleic acid necessitates additional validation with patient samples carrying the full spectrum of mutations; (iii) for multistep digital amplification chemistries, such as a combination of reverse transcription with amplification, microfluidic devices may be used to decouple these steps from one another and to perform them under different, individually optimized conditions for improved efficiency.


Assuntos
HIV-1/isolamento & purificação , Técnicas Analíticas Microfluídicas/normas , RNA Viral/isolamento & purificação , Reação em Cadeia da Polimerase Via Transcriptase Reversa/normas , Carga Viral/normas , Humanos , Técnicas Analíticas Microfluídicas/métodos , Reação em Cadeia da Polimerase Via Transcriptase Reversa/métodos , Carga Viral/métodos
6.
Langmuir ; 28(3): 1931-41, 2012 Jan 24.
Artigo em Inglês | MEDLINE | ID: mdl-22233156

RESUMO

This Article describes the use of capillary pressure to initiate and control the rate of spontaneous liquid-liquid flow through microfluidic channels. In contrast to flow driven by external pressure, flow driven by capillary pressure is dominated by interfacial phenomena and is exquisitely sensitive to the chemical composition and geometry of the fluids and channels. A stepwise change in capillary force was initiated on a hydrophobic SlipChip by slipping a shallow channel containing an aqueous droplet into contact with a slightly deeper channel filled with immiscible oil. This action induced spontaneous flow of the droplet into the deeper channel. A model predicting the rate of spontaneous flow was developed on the basis of the balance of net capillary force with viscous flow resistance, using as inputs the liquid-liquid surface tension, the advancing and receding contact angles at the three-phase aqueous-oil-surface contact line, and the geometry of the devices. The impact of contact angle hysteresis, the presence or absence of a lubricating oil layer, and adsorption of surface-active compounds at liquid-liquid or liquid-solid interfaces were quantified. Two regimes of flow spanning a 10(4)-fold range of flow rates were obtained and modeled quantitatively, with faster (mm/s) flow obtained when oil could escape through connected channels as it was displaced by flowing aqueous solution, and slower (micrometer/s) flow obtained when oil escape was mostly restricted to a micrometer-scale gap between the plates of the SlipChip ("dead-end flow"). Rupture of the lubricating oil layer (reminiscent of a Cassie-Wenzel transition) was proposed as a cause of discrepancy between the model and the experiment. Both dilute salt solutions and complex biological solutions such as human blood plasma could be flowed using this approach. We anticipate that flow driven by capillary pressure will be useful for the design and operation of flow in microfluidic applications that do not require external power, valves, or pumps, including on SlipChip and other droplet- or plug-based microfluidic devices. In addition, this approach may be used as a sensitive method of evaluating interfacial tension, contact angles, and wetting phenomena on chip.


Assuntos
Microfluídica/instrumentação , Microfluídica/métodos , Modelos Teóricos , Interações Hidrofóbicas e Hidrofílicas , Propriedades de Superfície , Viscosidade
7.
Biophys J ; 99(6): 1916-24, 2010 Sep 22.
Artigo em Inglês | MEDLINE | ID: mdl-20858437

RESUMO

The Holliday junction (HJ), or four-way junction, is a central intermediate state of DNA for homologous genetic recombination and other genetic processes such as replication and repair. Branch migration is the process by which the exchange of homologous DNA regions occurs, and it can be spontaneous or driven by proteins. Unfolding of the HJ is required for branch migration. Our previous single-molecule fluorescence studies led to a model according to which branch migration is a stepwise process consisting of consecutive migration and folding steps. Folding of the HJ in one of the folded conformations terminates the branch migration phase. At the same time, in the unfolded state HJ rapidly migrates over entire homology region of the HJ in one hop. This process can be affected by irregularities in the DNA double helical structure, so mismatches almost terminate a spontaneous branch migration. Single-stranded breaks or nicks are the most ubiquitous defects in the DNA helix; however, to date, their effect on the HJ branch migration has not been studied. In addition, although nicked HJs are specific substrates for a number of enzymes involved in DNA recombination and repair, the role of this substrate specificity remains unclear. Our main goal in this work was to study the effect of nicks on the efficiency of HJ branch migration and the dynamics of the HJ. To accomplish this goal, we applied two single-molecule methods: atomic force microscopy and fluorescence resonance energy transfer. The atomic force microscopy data show that the nick does not prevent branch migration, but it does decrease the probability that the HJ will pass the DNA lesion. The single-molecule fluorescence resonance energy transfer approaches were instrumental in detailing the effects of nicks. These studies reveal a dramatic change of the HJ dynamics. The nick changes the structure and conformational dynamics of the junctions, leading to conformations with geometries that are different from those for the intact HJ. On the basis of these data, we propose a model of branch migration in which the propensity of the junction to unfold decreases the lifetimes of folded states, thereby increasing the frequency of junction fluctuations between the folded states.


Assuntos
Quebras de DNA de Cadeia Simples , DNA Cruciforme/genética , DNA Cruciforme/metabolismo , Conformação de Ácido Nucleico , Sequência de Bases , DNA Cruciforme/química , Transferência Ressonante de Energia de Fluorescência , Microscopia de Força Atômica , Homologia de Sequência do Ácido Nucleico
8.
Anal Chem ; 82(11): 4606-12, 2010 Jun 01.
Artigo em Inglês | MEDLINE | ID: mdl-20446698

RESUMO

The SlipChip platform was tested to perform high-throughput nanoliter multiplex PCR. The advantages of using the SlipChip platform for multiplex PCR include the ability to preload arrays of dry primers, instrument-free sample manipulation, small sample volume, and high-throughput capacity. The SlipChip was designed to preload one primer pair per reaction compartment and to screen up to 384 different primer pairs with less than 30 nanoliters of sample per reaction compartment. Both a 40-well and a 384-well design of the SlipChip were tested for multiplex PCR. In the geometries used here, the sample fluid was spontaneously compartmentalized into discrete volumes even before slipping of the two plates of the SlipChip, but slipping introduced additional capabilities that made devices more robust and versatile. The wells of this SlipChip were designed to overcome potential problems associated with thermal expansion. By using circular wells filled with oil and overlapping them with square wells filled with the aqueous PCR mixture, a droplet of aqueous PCR mixture was always surrounded by the lubricating fluid. In this design, during heating and thermal expansion, only oil was expelled from the compartment and leaking of the aqueous solution was prevented. Both 40-well and 384-well devices were found to be free from cross-contamination, and end point fluorescence detection provided reliable readout. Multiple samples could also be screened on the same SlipChip simultaneously. Multiplex PCR was validated on the 384-well SlipChip with 20 different primer pairs to identify 16 bacterial and fungal species commonly presented in blood infections. The SlipChip correctly identified five different bacterial or fungal species in separate experiments. In addition, the presence of the resistance gene mecA in methicillin resistant Staphylococcus aureus (MRSA) was identified. The SlipChip will be useful for applications involving PCR arrays and lays the foundation for new strategies for diagnostics, point-of-care devices, and immobilization-based arrays.


Assuntos
Dispositivos Lab-On-A-Chip , Reação em Cadeia da Polimerase/instrumentação , Genes Bacterianos/genética , Genes Fúngicos/genética , Reprodutibilidade dos Testes
9.
Langmuir ; 26(14): 12465-71, 2010 Jul 20.
Artigo em Inglês | MEDLINE | ID: mdl-20575548

RESUMO

In this paper, we describe a method to load a microfluidic device, the SlipChip, via dead-end filling. In dead-end filling, the lubricating fluid that fills the SlipChip after assembly is dissipated through the gap between the two plates of the SlipChip instead of flowing through an outlet at the end of the fluidic path. We describe a theoretical model and associated predictions of dead-end filling that takes into consideration the interfacial properties and the gap size between plates of SlipChips. In this method, filling is controlled by the balance of pressures: for filling to occur without leaking, the inlet pressure must be greater than the capillary pressure but less than the maximum sealing pressure. We evaluated our prediction with experiments, and our empirical results agreed well with theory. Internal reservoirs were designed to prevent evaporation during loading of multiple solutions. Solutions were first loaded one at a time into inlet reservoirs; by applying a single pressure source to the device, we were able to fill multiple fluidic paths simultaneously. We used this method to fill both lubricated and dry SlipChips. Dry-loaded SlipChips were fabricated from fluorinated ethylene propylene (FEP) by using hot embossing techniques, and were successfully filled and slipped to perform a simple chemical reaction. The SlipChip design was also modified to enable ease of filling by using multiple access holes to the inlet reservoir.


Assuntos
Lubrificação , Técnicas Analíticas Microfluídicas/métodos , Modelos Teóricos , Técnicas Analíticas Microfluídicas/instrumentação , Propriedades de Superfície
10.
Biophys J ; 95(3): 1239-47, 2008 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-18424495

RESUMO

The Holliday junction is a central intermediate in various genetic processes including homologous, site-specific recombination and DNA replication. Recent single molecule FRET experiments led to the model for branch migration as a stepwise stochastic process in which the branch migration hop is terminated by the folding of the junction. In this article, we studied the effect of the sequence on Holliday junction dynamics and branch migration process. We show that a GC pair placed at the border of the homologous region almost prevents the migration into this position. At the same time, insertion of a GC pair into the middle of the AT tract does not show this effect, however when the junction folds at this position, it resides at this position much longer time in comparison to the folding at AT pairs. Two contiguous GC pairs do not block migration as well and generally manifest the same effect as one GC pair--the junction when it folds resides at these positions for a relatively long time. The same elevated residence time was obtained for the design with the homology region that consists of only GC pairs. These data suggest a model for branch migration in which the sequence modulates the overall stochastic process of the junction dynamics and branch migration by the variability of the time that the junction dwells before making a migration hop.


Assuntos
DNA Cruciforme/química , DNA Cruciforme/genética , Transferência Ressonante de Energia de Fluorescência/métodos , Modelos Químicos , Técnicas de Sonda Molecular , Sequência de Bases , Simulação por Computador , Dados de Sequência Molecular
11.
Biophys J ; 95(9): 4372-83, 2008 Nov 01.
Artigo em Inglês | MEDLINE | ID: mdl-18658216

RESUMO

The Holliday junction (HJ) is a central intermediate of various genetic processes, including homologous and site-specific DNA recombination and DNA replication. Elucidating the structure and dynamics of HJs provides the basis for understanding the molecular mechanisms of these genetic processes. Our previous single-molecule fluorescence studies led to a model according to which branch migration is a stepwise process consisting of consecutive migration and folding steps. These data led us to the conclusion that one hop can be more than 1 basepair (bp); moreover, we hypothesized that continuous runs over the entire sequence homology (5 bp) can occur. Direct measurements of the dependence of the fluorescence resonance energy transfer (FRET) value on the donor-acceptor (D-A) distance are required to justify this model and are the major goal of this article. To accomplish this goal, we performed single-molecule FRET experiments with a set of six immobile HJ molecules with varying numbers of bps between fluorescent dyes placed on opposite arms. The designs were made in such a way that the distances between the donor and acceptor were equal to the distances between the dyes formed upon 1-bp migration hops of a HJ having 10-bp homology. Using these designs, we confirmed our previous hypothesis that the migration of the junction can be measured with bp accuracy. Moreover, the FRET values determined for each acceptor-donor separation corresponded very well to the values for the steps on the FRET time trajectories, suggesting that each step corresponds to the migration of the branch at a defined depth. We used the dependence of the FRET value on the D-A distance to measure directly the size for each step on the FRET time trajectories. These data showed that one hop is not necessarily 1 bp. The junction is able to migrate over several bps, detected as one hop and confirming our model. The D-A distances extracted from the FRET properties of the immobile junctions formed the basis for modeling the HJ structures. The composite data fit a partially opened, side-by-side model with adjacent double-helical arms slightly kinked at the four-way junction and the junction as a whole adopting a global X-shaped form that mimics the coaxially stacked-X structure implicated in previous solution studies.


Assuntos
DNA Cruciforme/química , DNA Cruciforme/metabolismo , Fluorescência , Modelos Moleculares , Sequência de Bases , DNA Cruciforme/genética , Transferência Ressonante de Energia de Fluorescência
12.
J Mol Biol ; 354(5): 1028-42, 2005 Dec 16.
Artigo em Inglês | MEDLINE | ID: mdl-16290901

RESUMO

Protein misfolding is conformational transition dramatically facilitating the assembly of protein molecules into aggregates of various morphologies. Spontaneous formation of specific aggregates, mostly amyloid fibrils, was initially believed to be limited to proteins involved in the development of amyloidoses. However, recent studies show that, depending on conditions, the majority of proteins undergo structural transitions leading to the appearance of amyloidogenic intermediates followed by aggregate formation. Various techniques have been used to characterize the protein misfolding facilitating the aggregation process, but no direct evidence as to how such a conformational transition increases the intermolecular interactions has been obtained as of yet. We have applied atomic force microscopy (AFM) to follow the interaction between protein molecules as a function of pH. These studies were performed for three unrelated and structurally distinctive proteins, alpha-synuclein, amyloid beta-peptide (Abeta) and lysozyme. It was shown that the attractive force between homologous protein molecules is minimal at physiological pH and increases dramatically at acidic pH. Moreover, the dependence of the pulling forces is sharp, suggesting a pH-dependent conformational transition within the protein. Parallel circular dichroism (CD) measurements performed for alpha-synuclein and Abeta revealed that the decrease in pH is accompanied by a sharp conformational transition from a random coil at neutral pH to the more ordered, predominantly beta-sheet, structure at low pH. Importantly, the pH ranges for these conformational transitions coincide with those of pulling forces changes detected by AFM. In addition, protein self-assembly into filamentous aggregates studied by AFM imaging was shown to be facilitated at pH values corresponding to the maximum of pulling forces. Overall, these results indicate that proteins at acidic pH undergo structural transition into conformations responsible for the dramatic increase in interprotein interaction and promoting the formation of protein aggregates.


Assuntos
Peptídeos beta-Amiloides/ultraestrutura , Microscopia de Força Atômica , Muramidase/ultraestrutura , Fragmentos de Peptídeos/ultraestrutura , alfa-Sinucleína/química , alfa-Sinucleína/ultraestrutura , Sequência de Aminoácidos , Peptídeos beta-Amiloides/química , Animais , Galinhas , Dicroísmo Circular , Humanos , Concentração de Íons de Hidrogênio , Muramidase/química , Muramidase/genética , Mutação , Fragmentos de Peptídeos/química , Conformação Proteica , Desnaturação Proteica , Estrutura Secundária de Proteína , Análise Espectral , Temperatura , alfa-Sinucleína/metabolismo
13.
ACS Nano ; 10(3): 3102-13, 2016 Mar 22.
Artigo em Inglês | MEDLINE | ID: mdl-26900709

RESUMO

Digital single-molecule technologies are expanding diagnostic capabilities, enabling the ultrasensitive quantification of targets, such as viral load in HIV and hepatitis C infections, by directly counting single molecules. Replacing fluorescent readout with a robust visual readout that can be captured by any unmodified cell phone camera will facilitate the global distribution of diagnostic tests, including in limited-resource settings where the need is greatest. This paper describes a methodology for developing a visual readout system for digital single-molecule amplification of RNA and DNA by (i) selecting colorimetric amplification-indicator dyes that are compatible with the spectral sensitivity of standard mobile phones, and (ii) identifying an optimal ratiometric image-process for a selected dye to achieve a readout that is robust to lighting conditions and camera hardware and provides unambiguous quantitative results, even for colorblind users. We also include an analysis of the limitations of this methodology, and provide a microfluidic approach that can be applied to expand dynamic range and improve reaction performance, allowing ultrasensitive, quantitative measurements at volumes as low as 5 nL. We validate this methodology using SlipChip-based digital single-molecule isothermal amplification with λDNA as a model and hepatitis C viral RNA as a clinically relevant target. The innovative combination of isothermal amplification chemistry in the presence of a judiciously chosen indicator dye and ratiometric image processing with SlipChip technology allowed the sequence-specific visual readout of single nucleic acid molecules in nanoliter volumes with an unmodified cell phone camera. When paired with devices that integrate sample preparation and nucleic acid amplification, this hardware-agnostic approach will increase the affordability and the distribution of quantitative diagnostic and environmental tests.


Assuntos
Telefone Celular , DNA/análise , Técnicas Analíticas Microfluídicas/instrumentação , Técnicas de Amplificação de Ácido Nucleico/instrumentação , RNA/análise , Bacteriófago lambda/isolamento & purificação , Colorimetria/instrumentação , Corantes/análise , DNA Viral/análise , Desenho de Equipamento , Hepacivirus/isolamento & purificação , Hepatite C/virologia , Humanos , RNA Viral/análise , Tamanho da Amostra
14.
J Mol Biol ; 334(1): 53-63, 2003 Nov 14.
Artigo em Inglês | MEDLINE | ID: mdl-14596799

RESUMO

DNA looping is often involved in positive and negative regulation of gene transcription in both prokaryotes and eukaryotes. The transcription of the gal operon of Escherichia coli from two overlapping promoters P1 and P2 is negatively regulated via Gal repressosome assembly. It involves binding of two dimeric Gal repressor proteins (GalR) to two operators, O(E) and O(I), flanking the two promoters, and formation of 113 bp DNA loop due to tetramerization of the two bound GalR dimers. The process requires negatively supercoiled DNA and the presence of the histone-like protein HU. Previous modeling of the repressosome based on evaluation of DNA elastic energy suggested a mutual antiparallel, rather than parallel, orientation of the two gal operators in an under-twisted DNA loop. To visualize the Gal loop by atomic force microscopy (AFM), plasmid DNA molecules were constructed with increased distance between the two operators. The AFM results demonstrated the formation of an antiparallel DNA loop in the Gal repressosome consistent with our earlier hypothesis. Importantly, the overall shape of the GalR mediated loop proved to be indistinguishable from that in the chimerical loop of the same size containing two lac operators (instead of two gal operators) and formed by LacI. In addition, a possibility of the gal operon repression mediated by GalR in the absence of HU was shown in the new DNA constructs. Implications of these findings for the DNA structural organization in bacterial nucleoid are discussed.


Assuntos
Conformação de Ácido Nucleico , Proteínas Repressoras/química , Proteínas Repressoras/genética , Proteínas de Bactérias/genética , DNA Bacteriano , Proteínas de Ligação a DNA , Proteínas de Escherichia coli , Regulação Bacteriana da Expressão Gênica , Substâncias Macromoleculares , Microscopia de Força Atômica , Óperon , Regiões Promotoras Genéticas
15.
Brain Res Mol Brain Res ; 134(1): 84-102, 2005 Mar 24.
Artigo em Inglês | MEDLINE | ID: mdl-15790533

RESUMO

Substantial evidence suggests that the aggregation of the presynaptic protein alpha-synuclein is a key step in the etiology of Parkinson's disease (PD). Although the molecular mechanisms underlying alpha-synuclein aggregation remain unknown, oxidative stress has been implicated in the pathogenesis of PD. Here, we report the effects of tyrosine nitration on the propensity of human recombinant alpha-synuclein to fibrillate in vitro. The properties of nitrated alpha-synuclein were investigated using a variety of biophysical and biochemical techniques, which revealed that nitration led to formation of a partially folded conformation with increased secondary structure relative to the intrinsically disordered structure of the monomer, and to oligomerization at neutral pH. The degree of self-association was concentration-dependent, but at 1 mg/mL, nitrated alpha-synuclein was predominantly an octamer. At low pH, small-angle X-ray scattering data indicated that the nitrated protein was monomeric. alpha-Synuclein fibrillation at neutral pH was completely inhibited by nitrotyrosination and is attributed to the formation of stable soluble oligomers. The presence of heparin or metals did not overcome the inhibition; however, the inhibitory effect was eliminated at low pH. The addition of nitrated alpha-synuclein inhibited fibrillation of non-modified alpha-synuclein at neutral pH. Potential implications of these findings to the etiology of Parkinson's disease are discussed.


Assuntos
Proteínas do Tecido Nervoso/metabolismo , Oxidantes/farmacologia , Tetranitrometano/farmacologia , Animais , Dicroísmo Circular/métodos , Relação Dose-Resposta a Droga , Humanos , Microscopia de Força Atômica/métodos , Microscopia Eletrônica de Varredura/métodos , Modelos Moleculares , Proteínas do Tecido Nervoso/química , Proteínas do Tecido Nervoso/ultraestrutura , Proteínas Recombinantes/química , Proteínas Recombinantes/efeitos dos fármacos , Proteínas Recombinantes/metabolismo , Proteínas Recombinantes/ultraestrutura , Espectrometria por Raios X/métodos , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Análise Espectral/métodos , Fibras de Estresse/efeitos dos fármacos , Fibras de Estresse/metabolismo , Fibras de Estresse/ultraestrutura , Sinucleínas , Fatores de Tempo , Tirosina/metabolismo , alfa-Sinucleína
16.
Nanomedicine ; 1(1): 52-7, 2005 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-17292058

RESUMO

BACKGROUND: Huntington's disease is an autosomal dominant progressive neurodegenerative disease associated with dramatic expansion of a polyglutamine sequence in exon 1 of the huntingtin protein htt that leads to cytoplasmic, and even nuclear aggregation of fibrils. METHODS: We have studied the in vitro fibril formation of mutant exon 1, and the shorter wild-type exon 1, with use of atomic force microscopy (AFM). RESULTS: Large aggregates are formed spontaneously after cleavage of the glutathione-S-transferase fusion protein of the mutant exon 1 protein. The AFM data showed that, unlike fibrils assembled by such proteins as amyloid beta-peptide and alpha-synuclein, htt forms fibrils with extensive branched morphologic features. Branching can be observed even at earlier stages of the htt self-assembly, but the effect is much more pronounced at late stages of aggregation. We also found that fusing of htt with green fluorescent protein does not change the branched-type morphologic features of the aggregates. CONCLUSIONS: On the basis of the results obtained, we propose a model for htt fibrillization that explains branched morphologic features of the aggregates.


Assuntos
Microscopia de Força Atômica/métodos , Modelos Químicos , Modelos Moleculares , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Proteínas do Tecido Nervoso/química , Proteínas do Tecido Nervoso/ultraestrutura , Proteínas Nucleares/química , Proteínas Nucleares/ultraestrutura , Simulação por Computador , Cristalização/métodos , Dimerização , Proteína Huntingtina , Complexos Multiproteicos/química , Complexos Multiproteicos/ultraestrutura , Ligação Proteica , Conformação Proteica
17.
Integr Biol (Camb) ; 6(8): 796-805, 2014 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-24953827

RESUMO

Isolating microbes carrying genes of interest from environmental samples is important for applications in biology and medicine. However, this involves the use of genetic assays that often require lysis of microbial cells, which is not compatible with the goal of obtaining live cells for isolation and culture. This paper describes the design, fabrication, biological validation, and underlying physics of a microfluidic SlipChip device that addresses this challenge. The device is composed of two conjoined plates containing 1000 microcompartments, each comprising two juxtaposed wells, one on each opposing plate. Single microbial cells are stochastically confined and subsequently cultured within the microcompartments. Then, we split each microcompartment into two replica droplets, both containing microbial culture, and then controllably separate the two plates while retaining each droplet within each well. We experimentally describe the droplet retention as a function of capillary pressure, viscous pressure, and viscosity of the aqueous phase. Within each pair of replicas, one can be used for genetic analysis, and the other preserves live cells for growth. This microfluidic approach provides a facile way to cultivate anaerobes from complex communities. We validate this method by targeting, isolating, and culturing Bacteroides vulgatus, a core gut anaerobe, from a clinical sample. To date, this methodology has enabled isolation of a novel microbial taxon, representing a new genus. This approach could also be extended to the study of other microorganisms and even mammalian systems, and may enable targeted retrieval of solutions in applications including digital PCR, sequencing, single cell analysis, and protein crystallization.


Assuntos
Técnicas Analíticas Microfluídicas/instrumentação , Microfluídica/métodos , Aderência Bacteriana , Bacteroides/metabolismo , Infecções por Bacteroides/microbiologia , Sequência de Bases , Biópsia , Cristalização , Desenho de Equipamento , Humanos , Dados de Sequência Molecular , Reação em Cadeia da Polimerase , Pressão , Sefarose/química , Processos Estocásticos , Temperatura , Viscosidade
19.
Biophys J ; 92(9): 3241-50, 2007 May 01.
Artigo em Inglês | MEDLINE | ID: mdl-17277188

RESUMO

A single-molecule analysis was applied to study the dynamics of synaptic and presynaptic DNA-protein complexes (binding of two DNA and one DNA duplex, respectively). In the approach used in this study, the protein was tethered to a surface, allowing a freely diffusing fluorescently labeled DNA to bind to the protein, thus forming a presynaptic complex. The duration of fluorescence burst is the measure of the characteristic lifetime of the complex. To study the formation of the synaptic complex, the two SfiI-bound duplexes with the labeled donor and acceptor were used. The synaptic complex formation by these duplexes was detected by the fluorescence resonance energy transfer approach. The duration of the fluorescence resonance energy transfer burst is the measure of the characteristic lifetime of the synaptic complex. We showed that both synaptic and presynaptic complexes have characteristic dissociation times in the range of milliseconds, with the synaptic SfiI-DNA complex having the shorter dissociation time. Comparison of the off-rate data for the synaptic complex with the rate of DNA cleavage led to the hypothesis that the complex is very dynamic, so the formation of an enzymatically active synaptic complex is a rather rare event in these series of conformational transitions.


Assuntos
DNA/química , DNA/ultraestrutura , Desoxirribonucleases de Sítio Específico do Tipo II/química , Desoxirribonucleases de Sítio Específico do Tipo II/ultraestrutura , Modelos Químicos , Modelos Moleculares , Sinapses/química , Simulação por Computador , Ativação Enzimática , Cinética , Substâncias Macromoleculares/química , Microscopia de Fluorescência/métodos , Técnicas de Sonda Molecular , Ligação Proteica
20.
Mol Microbiol ; 63(3): 629-43, 2007 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-17302797

RESUMO

Clostridium taeniosporum spores have about 12 large, flat, ribbon-like appendages attached through a common trunk at one spore pole to a previously unknown surface layer outside the coat that is proposed to be called the 'encasement'. Appendages are about 4.5 microm long, 0.5 microm wide and 30 nm thick and taper at the attachment end into a semicircle that is twisted relative to the flat ribbon. Individual fibrils, about 45 nm in length with spherical heads and long thin tails, form a hair-like nap, visible along the appendage edge. Four appendage proteins have been detected: a paralogous pair of 29 kDa (designated P29a and P29b), a glycoprotein of about 37 kDa (designated GP85) and an orthologue of the Bacillus spore morphogenetic protein SpoVM. The P29 proteins consist of duplicated regions and each region includes a domain of unknown function 11. The GP85 glycoprotein contains a collagen-like region. The genes for P29a and b, GP85 and possibly related proteins are closely linked on two small chromosome fragments. Putative sigma(K)-dependent promoters upstream of the P29a and b genes indicate that they likely are expressed late in the mother cell, consistent with their deposition into the layer external to the coat.


Assuntos
Clostridium/citologia , Clostridium/fisiologia , Genes Bacterianos , Esporos Bacterianos/ultraestrutura , Sequência de Aminoácidos , Proteínas de Bactérias/química , Proteínas de Bactérias/genética , Sequência de Bases , Cromossomos Bacterianos , Clostridium/química , Clostridium/genética , Microscopia Eletrônica de Transmissão , Dados de Sequência Molecular , Esporos Bacterianos/química , Esporos Bacterianos/genética
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA