Comparative Investigation of Water-Based CMC and LA133 Binders for CuO Anodes in High-Performance Lithium-Ion Batteries.

Transition metal oxides are considered to be highly promising anode materials for high-energy lithium-ion batteries. While carbon matrices have demonstrated effectiveness in enhancing the electrical conductivity and accommodating the volume expansion of transition metal oxide-based anode materials in lithium-ion batteries (LIBs), achieving an optimized utilization ratio remains a challenging obstacle. In this investigation, we have devised a straightforward synthesis approach to fabricate CuO nano powder integrated with carbon matrix. We found that with the use of a sodium carboxymethyl cellulose (CMC) based binder and fluoroethylene carbonate additives, this anode exhibits enhanced performance compared to acrylonitrile multi-copolymer binder (LA133) based electrodes. CuO@CMC electrodes reveal a notable capacity ~1100 mA h g-1 at 100 mA g-1 following 170 cycles, and exhibit prolonged cycling stability, with a capacity of 450 mA h g-1 at current density 300 mA g-1 over 500 cycles. Furthermore, they demonstrated outstanding rate performance and reduced charge transfer resistance. This study offers a viable approach for fabricating electrode materials for next-generation, high energy storage devices.

Block Copolymer-Assisted Synthesis of Iron Oxide Nanoparticles for Effective Removal of Congo Red.

Iron oxide nanoparticles (IONPs) were synthesized via a block copolymer-assisted hydrothermal method and the phase purity and the crystal structure were investigated by X-ray diffraction. The Rietveld analysis of X-ray diffractometer spectra shows the hexagonal phase symmetry of α-Fe2O3. Further, the vibrational study suggests Raman active modes: 2A1g + 5Eg associated with α-Fe2O3, which corroborates the Rietveld analysis and orbital analysis of 2PFe. The superparamagnetic behavior is confirmed by magnetic measurements performed by the physical properties measurement system. The systematic study of the Congo red (CR) interaction with IONPs using a UV-visible spectrophotometer and a liquid chromatography-tandem mass spectrometry system equipped with a triple quadrupole mass analyzer and an electrospray ionization interface shows effective adsorption. In visible light, the Fe2O3 nanoparticles get easily excited and generate electrons and holes. The photogenerated electrons reduce the Fe3+ ions to Fe2+ ions. The Fe2+/H2O2 oxidizes CR by the Fenton mechanism. The strong adsorption ability of prepared nanoparticles towards dyes attributes the potential candidates for wastewater treatment and other catalytic applications.

Enhanced resistive switching in forming-free graphene oxide films embedded with gold nanoparticles deposited by electrophoresis.

Forming-free resistive random access memory (ReRAM) devices having low switching voltages are a prerequisite for their commercial applications. In this study, the forming-free resistive switching characteristics of graphene oxide (GO) films embedded with gold nanoparticles (Au Nps), having an enhanced on/off ratio at very low switching voltages, were investigated for non-volatile memories. The GOAu films were deposited by the electrophoresis method and as-grown films were found to be in the low resistance state; therefore no forming voltage was required to activate the devices for switching. The devices having an enlarged on/off ratio window of ∼10(6) between two resistance states at low voltages (<1 V) for repetitive dc voltage sweeps showed excellent properties of endurance and retention. In these films Au Nps were uniformly dispersed over a large area that provided charge traps, which resulted in improved switching characteristics. Capacitance was also found to increase by a factor of ∼10, when comparing high and low resistance states in GOAu and pristine GO devices. Charge trapping and de-trapping by Au Nps was the mechanism responsible for the improved switching characteristics in the films.

Correlation of dielectric, electrical and magnetic properties near the magnetic phase transition temperature of cobalt zinc ferrite.

Multiferroic composite structures, i.e., composites of magnetostrictive and piezoelectric materials, can be envisioned to achieve the goal of strong room-temperature ME coupling for real practical device applications. Magnetic materials with high magnetostriction, high Néel temperature (TN), high resistivity and large magnetization are required to observe high ME coupling in composite structures. In continuation of our investigations on suitable magnetic candidates for multiferroic composite structures, we have studied the crystal structure, dielectric, transport, and magnetic properties of Co0.65Zn0.35Fe2O4 (CZFO). Rietveld refinement of X-ray diffraction patterns confirms the phase purity with a cubic crystal structure with the (Fd3[combining macron]m) space group; however, we have found a surprisingly large magneto-dielectric anomaly at the Néel temperature, unexpected for a cubic structure. The presence of mixed valences of Fe2+/Fe3+ cations is probed by X-ray photoelectron spectroscopy (XPS), which supports the catonic ordering-mediated large dielectric response. Large dielectric permittivity dispersion with a broad anomaly is observed in the vicinity of the magnetic phase transition temperature (TN) of CZFO suggesting a strong correlation between dielectric and magnetic properties. The evidence of strong spin-polaron coupling has been established from temperature dependent dielectric, ac conductivity and magnetization studies. The ferrimagnetic-paramagnetic phase transition of CZFO has been found at ∼640 K, which is well above room temperature. CZFO exhibits low loss tangent, a high dielectric constant, large magnetization with soft magnetic behavior and magnetodielectric coupling above room temperature, elucidating the possible potential candidates for multiferroic composite structures as well as for multifunctional and spintronics device applications.

Surface energy engineering for tunable wettability through controlled synthesis of MoS2.

MoS2 is an important member of the transition metal dichalcogenides that is emerging as a potential 2D atomically thin layered material for low power electronic and optoelectronic applications. However, for MoS2 a critical fundamental question of significant importance is how the surface energy and hence the wettability is altered at the nanoscale in particular, the role of crystallinity and orientation. This work reports on the synthesis of large area MoS2 thin films on insulating substrates (SiO2/Si and Al2O3) with different surface morphology via vapor phase deposition by varying the growth temperatures. The samples were examined using transmission electron microscopy and Raman spectroscopy. From contact angle measurements, it is possible to correlate the wettability with crystallinity at the nanoscale. The specific surface energy for few layers MoS2 is estimated to be about 46.5 mJ/m(2). Moreover a layer thickness-dependent wettability study suggests that the lower the thickness is, the higher the contact angle will be. Our results shed light on the MoS2-water interaction that is important for the development of devices based on MoS2 coated surfaces for microfluidic applications.

Exploring Lead Zirconate Titanate, the Potential Advancement as an Anode for Li-Ion Batteries.

Graphite, widely adopted as an anode for lithium-ion batteries (LIBs), faces challenges such as an unsustainable supply chain and sluggish rate capabilities. This emphasizes the urgent need to explore alternative anode materials for LIBs, aiming to resolve these challenges and drive the advancement of more efficient and sustainable battery technologies. The present research investigates the potential of lead zirconate titanate (PZT: PbZr0.53Ti0.47O3) as an anode material for LIBs. Bulk PZT materials were synthesized by using a solid-state reaction, and the electrochemical performance as an anode was examined. A high initial discharge capacity of approximately 686 mAh/g was attained, maintaining a stable capacity of around 161 mAh/g after 200 cycles with diffusion-controlled intercalation as the primary charge storage mechanism in a PZT anode. These findings suggest that PZT exhibits a promising electrochemical performance, positioning it as a potential alternative anode material for LIBs.

Holey Graphene/Ferroelectric/Sulfur Composite Cathodes for High-Capacity Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries have attracted considerable interest as next-generation high-density energy storage devices. However, their practical applications are limited by rapid capacity fading when cycling cells with high mass loading levels. This could be largely attributed to the inferior electron/ion conduction and the severe shuttling effect of soluble polysulfide species. To address these issues, composites of sulfur/ferroelectric nanoparticles/ho ley graphene (S/FNPs/hG) cathodes were fabricated for high-mass-loading S cathodes. The solvent-free and binder-free procedure is enabled using holey graphene as a unique dry-pressable electrode for Li-S batteries. The unique structure of the holey graphene framework ensures fast electron and ion transport within the electrode and affords enough space to mitigate the electrode's volume expansion. Moreover, ferroelectric polarization due to FNPs within S/hG composites induces an internal electric field, which effectively reduces the undesired shuttling effect. With these advantages, the S/FNPs/hG composite cathodes exhibit sustainable and ultrahigh specific capacity up to 1409 mAh/gs for the S/BTO/hG cathode. A capacity retention value of 90% was obtained for the S/BNTFN/hG battery up to cycle 18. The high mass loading of sulfur ranging from 5.72 to 7.01 mgs/cm2 allows maximum high areal capacity up to ∼10 mAh/cm2 for the S/BTO/hG battery and superior rate capability at 0.2 and 0.5 mA/cm2. These results suggest sustainable and high-yielding Li-S batteries can be obtained for potential commercial applications.

Ferroelectric-carbon nanotube memory devices.

One-dimensional ferroelectric nanostructures, carbon nanotubes (CNT) and CNT-inorganic oxides have recently been studied due to their potential applications for microelectronics. Here, we report coating of a registered array of aligned multi-wall carbon nanotubes (MWCNT) grown on silicon substrates by functional ferroelectric Pb(Zr,Ti)O3 (PZT) which produces structures suitable for commercial prototype memories. Microstructural analysis reveals the crystalline nature of PZT with small nanocrystals aligned in different directions. First-order Raman modes of MWCNT and PZT/MWCNT/n-Si show the high structural quality of CNT before and after PZT deposition at elevated temperature. PZT exists mostly in the monoclinic Cc/Cm phase, which is the origin of the high piezoelectric response in the system. Low-loss square piezoelectric hysteresis obtained for the 3D bottom-up structure confirms the switchability of the device. Current-voltage mapping of the device by conducting atomic force microscopy (c-AFM) indicates very low transient current. Fabrication and functional properties of these hybrid ferroelectric-carbon nanotubes is the first step towards miniaturization for future nanotechnology sensors, actuators, transducers and memory devices.

High Entropy Oxide Relaxor Ferroelectrics.

Relaxor ferroelectrics are important in technological applications due to strong electromechanical response, energy storage capacity, electrocaloric effect, and pyroelectric energy conversion properties. Current efforts to discover and design materials in this class generally rely on substitutional doping as slight changes to local compositional order can significantly affect the Curie temperature, morphotropic phase boundary, and electromechanical responses. In this work, we demonstrate that moving to the strong limit of compositional complexity in an ABO3 perovskite allows stabilization of relaxor responses that do not rely on a single narrow phase transition region. Entropy-assisted synthesis approaches are utilized to synthesize single-crystal Ba(Ti0.2Sn0.2Zr0.2Hf0.2Nb0.2)O3 [Ba(5B)O] films. The high levels of configurational disorder present in this system are found to influence dielectric relaxation, phase transitions, nanopolar domain formation, and Curie temperature. Temperature-dependent dielectric, Raman spectroscopy, and second-harmonic generation measurements reveal multiple phase transitions, a high Curie temperature of 570 K, and the relaxor ferroelectric nature of Ba(5B)O films. The first-principles theory calculations are used to predict possible combinations of cations to design relaxor ferroelectrics and quantify the relative feasibility of synthesizing these highly disordered single-phase perovskite systems. The ability to stabilize single-phase perovskites with various cations on the B-sites offers possibilities for designing high-performance relaxor ferroelectric materials for piezoelectric, pyroelectric, and electrocaloric applications.

Graphene Growth Directly on SiO2/Si by Hot Filament Chemical Vapor Deposition.

We report the first direct synthesis of graphene on SiO2/Si by hot-filament chemical vapor deposition. Graphene deposition was conducted at low pressures (35 Torr) with a mixture of methane/hydrogen and a substrate temperature of 970 °C followed by spontaneous cooling to room temperature. A thin copper-strip was deposited in the middle of the SiO2/Si substrate as catalytic material. Raman spectroscopy mapping and atomic force microscopy measurements indicate the growth of few-layers of graphene over the entire SiO2/Si substrate, far beyond the thin copper-strip, while X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy showed negligible amounts of copper next to the initially deposited strip. The scale of the graphene nanocrystal was estimated by Raman spectroscopy and scanning electron microscopy.

Ellipsometry Study of CdSe Thin Films Deposited by PLD on ITO Coated Glass Substrates.

Cadmium selenide (CdSe) thin films were deposited on indium tin oxide (ITO) coated glass substrates using pulsed laser deposition (PLD) technique under different growth temperatures. Samples were investigated for their structural, morphological, and optical properties through X-ray diffraction (XRD), atomic force microscopy (AFM), and UV-Vis-NIR spectroscopy. AFM analysis revealed that the surface roughness of the as-grown CdSe thin films increased with the increase in deposition temperature. The optical constants and film thickness were obtained from spectroscopic ellipsometry analysis and are discussed in detail. The optical band gap of the as-grown CdSe thin films, calculated from the Tauc plot analysis, matched with the ellipsometry measurements, with a band gap of ~1.71 eV for a growth temperature range of 150 °C to 400 °C. The CdSe thin films were found to have a refractive index of ~3.0 and extinction coefficient of ~1.0, making it a suitable candidate for photovoltaics.

Lead palladium titanate: A room temperature nanoscale multiferroic thin film.

The discovery of single-phase multiferroic materials and the understanding of coupling mechanisms between their spin and polarization is important from the point of view of next generation logic and memory devices. Herein we report the fabrication, dielectric, ferroelectric, piezo-response force microscopy, and magnetization measurements of Pd-substituted room-temperature magnetoelectric multiferroic PbPd0.3Ti0.7O3 (PbPdT) thin films. Highly oriented PbPdT thin films were deposited on {(LaAlO3)0.3(Sr2AlTaO6)0.7} (LSAT) substrates in oxygen atmosphere using pulsed laser deposition technique. X-ray diffraction studies revealed that the films had tetragonal phase with (001) orientation. Surface morphology studies using atomic force and scanning electron microscopy suggest a smooth and homogeneous distribution of grains on the film surface with roughness ~2 nm. A large dielectric constant of ~1700 and a low-loss tangent value of ~0.3 at 10 kHz were obtained at room temperature. Temperature dependent dielectric measurements carried out on Pt/PbPdT/La0.7Sr0.3MnO3 (LSMO) metal-dielectric-metal capacitors suggest a ferroelectric to paraelectric transition above 670 K. The measured polarization hysteresis loops at room temperature were attributed to its ferroelectric behavior. From a Tauc plot of (αhν)2 versus energy, the direct band gap Eg of PbPdT thin films was calculated as 3 eV. Ferroelectric piezoelectric nature of the films was confirmed from a strong domain switching response revealed from piezo-response force microscopy. A well-saturated magnetization M-H loop with remanent magnetization of 3.5 emu/cm3 was observed at room temperature, and it retains ferromagnetic ordering in the temperature range 5-395 K. Origin of the magnetization could be traced to the mixed oxidation states of Pd2+/Pd4+ dispersed in polar PbTiO3 matrix, as revealed by our x-ray photoelectron spectroscopic results. These results suggest that PbPdT thin films are multiferroic (ferroelectric-ferromagnetic) at room temperature.

The Almeida-Thouless line in BiFeO(3): is bismuth ferrite a mean field spin glass?

Low-temperature magnetic properties of epitaxial BiFeO(3) (BFO) thin films grown on (111) SrTiO(3) substrates have been studied. Zero-field-cooled and field-cooled magnetization curves show a large discrepancy beginning at a characteristic temperature T(f) that is dependent on the magnetic field strength. T(f)(H) varies according to the well known de Almeida-Thouless line [Formula: see text] suggesting an acentric long-range spin-glass behavior and mean field system.

Non-Polar and Complementary Resistive Switching Characteristics in Graphene Oxide devices with Gold Nanoparticles: Diverse Approach for Device Fabrication.

Downscaling limitations and limited write/erase cycles in conventional charge-storage based non-volatile memories stimulate the development of emerging memory devices having enhanced performance. Resistive random-access memory (RRAM) devices are recognized as the next-generation memory devices for employment in artificial intelligence and neuromorphic computing, due to their smallest cell size, high write/erase speed and endurance. Unipolar and bipolar resistive switching characteristics in graphene oxide (GO) have been extensively studied in recent years, whereas the study of non-polar and complementary switching is scarce. Here we fabricated GO-based RRAM devices with gold nanoparticles (Au Nps). Diverse types of switching behavior are observed by changing the processing methods and device geometry. Tri-layer GO-based devices illustrated non-polar resistive switching, which is a combination of unipolar and bipolar switching. Five-layer GO-based devices depicted complementary resistive switching having the lowest current values ~12 µA; and this structure is capable of resolving the sneak path issue. Both devices show good retention and endurance performance. Au Nps in tri-layer devices assisted the conducting path, whereas in five-layer devices, Au Nps layer worked as common electrodes between co-joined cells. These GO-based devices with Au Nps comprising different configuration are vital for practical applications of emerging non-volatile resistive memories.

Studies of Multiferroic Palladium Perovskites.

We have studied the atomic force microscopy (AFM), X-ray Bragg reflections, X-ray absorption spectra (XAS) of the Pd L-edge, Scanning electron microscopey (SEM) and Raman spectra, and direct magnetoelectric tensor of Pd-substituted lead titanate and lead zirconate-titanate. A primary aim is to determine the percentage of Pd+4 and Pd+2 substitutional at the Ti-sites (we find that it is almost fully substitutional). The atomic force microscopy data uniquely reveal a surprise: both threefold vertical (polarized out-of-plane) and fourfold in-plane domain vertices. This is discussed in terms of the general rules for Voronoi patterns (Dirichlet tessellations) in two and three dimensions. At high pressures Raman soft modes are observed, as in pure lead titanate, and X-ray diffraction (XRD) indicates a nearly second-order displacive phase transition. However, two or three transitions are involved: First, there are anomalies in c/a ratio and Raman spectra at low pressures (P = 1 - 2 GPa); and second, the c/a ratio reaches unity at ca. P = 10 GPa, where a monoclinic (Mc) but metrically cubic transition occurs from the ambient tetragonal P4 mm structure in pure PbTiO3; whereas the Raman lines (forbidden in the cubic phase) remain until ca. 17 GPa, where a monoclinic-cubic transition is known in lead titanate.

Author Correction: Long-range Stripe Nanodomains in Epitaxial (110) BiFeO3 Thin Films on (100) NdGaO3 Substrate.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Ferroelectric Domain Studies of Patterned (001) BiFeO3 by Angle-Resolved Piezoresponse Force Microscopy.

We have studied the ferroelectric domains in (001) BiFeO3 (BFO) films patterned into mesas with various aspect ratios, using angle-resolved piezoresponse force microscope (AR-PFM), which can image the in-plane polarization component with an angular resolution of 30°. We observed not only stable polarization variants, but also meta-stable polarization variants, which can reduce the charge accumulated at domain boundaries. We considered the number of neighboring domains that are in contact, in order to analyze the complexity of the ferroelectric domain structure. Comparison of the ferroelectric domains from the patterned and unpatterned regions showed that the elastic relaxation induced by removal of the film surrounding the mesas led to a reduction of the average number of neighboring domains, indicative of a decrease in domain complexity. We also found that the rectangular BFO patterns with high aspect ratio had a simpler domain configuration and enhanced piezoelectric characteristics than square-shaped mesas. Manipulation of the ferroelectric domains by controlling the aspect ratio of the patterned BFO thin film mesas can be useful for nanoelectronic applications.

Exploring the Magnetoelectric Coupling at the Composite Interfaces of FE/FM/FE Heterostructures.

Multiferroic materials have attracted considerable attention as possible candidates for a wide variety of future microelectronic and memory devices, although robust magnetoelectric (ME) coupling between electric and magnetic orders at room temperature still remains difficult to achieve. In order to obtain robust ME coupling at room temperature, we studied the Pb(Fe0.5Nb0.5)O3/Ni0.65Zn0.35Fe2O4/Pb(Fe0.5Nb0.5)O3 (PFN/NZFO/PFN) trilayer structure as a representative FE/FM/FE system. We report the ferroelectric, magnetic and ME properties of PFN/NZFO/PFN trilayer nanoscale heterostructure having dimensions 70/20/70 nm, at room temperature. The presence of only (00l) reflection of PFN and NZFO in the X-ray diffraction (XRD) patterns and electron diffraction patterns in Transmission Electron Microscopy (TEM) confirm the epitaxial growth of multilayer heterostructure. The distribution of the ferroelectric loop area in a wide area has been studied, suggesting that spatial variability of ferroelectric switching behavior is low, and film growth is of high quality. The ferroelectric and magnetic phase transitions of these heterostructures have been found at ~575 K and ~650 K, respectively which are well above room temperature. These nanostructures exhibit low loss tangent, large saturation polarization (Ps ~ 38 µC/cm2) and magnetization (Ms ~ 48 emu/cm3) with strong ME coupling at room temperature revealing them as potential candidates for nanoscale multifunctional and spintronics device applications.

Nonequilibrium ferroelectric-ferroelastic 10 nm nanodomains: wrinkles, period-doubling, and power-law relaxation.

Since the 1935 work of Landau-Lifshitz and of Kittel in 1946 all ferromagnetic, ferroelectric, and ferroelastic domains have been thought to be straight-sided with domain widths proportional to the square root of the sample thickness. We show in the present work that this is not true. We also discover period doubling domains predicted by Metaxas et al (2008 Phys. Rev. Lett. 99 217208) and modeled by Wang and Zhao (2015 Sci. Rep. 5 8887). We examine non-equilibrium ferroic domain structures in perovskite oxides with respect to folding, wrinkling, and relaxation and suggest that structures are kinetically limited and in the viscous flow regime predicted by Metaxas et al in 2008 but never observed experimentally. Comparisons are made with liquid crystals and hydrodynamic instabilities, including chevrons, and fractional power-law relaxation. As Shin et al (2016 Soft Matter 12 3502) recently emphasized: 'An understanding of how these folds initiate, propagate, and interact with each other is still lacking'. Inside each ferroelastic domain are ferroelectric 90° nano-domains with 10 nm widths and periodicity in agreement with the 10 nm theoretical minima predicted by Feigl et al (2014 Nat. Commun. 5 4677). Evidence is presented for domain-width period doubling, which is common in polymer films but unknown in ferroic domains. A discussion of the folding-to-period doubling phase transition model of Wang and Zhao is included.

Long-range Stripe Nanodomains in Epitaxial (110) BiFeO3 Thin Films on (100) NdGaO3 Substrate.

Here, we report the observation of ferroelectric and ferroelastic nanodomains in (110)-oriented BiFeO3 (BFO) thin films epitaxially grown on low symmetric (100) NdGaO3 (NGO) substrate. We observed long range ordering of ferroelectric 109° stripe nanodomains separated by periodic vertical domain walls in as-grown 130 nm thick BFO films. The effect of La0.67Sr0.33CoO3 (LSCO) conducting interlayer on domain configurations in BFO/NGO film was also observed with relatively short range-ordering of stripe domains due to the modified electrostatic boundary conditions in BFO/LSCO/NGO film. Additional studies on B-site doping of Nb ions in BFO films showed change in the domain structures due to doping induced change in lattice anisotropy while maintaining the stripe domain morphology with 109° domain wall. This long-range array of ferroelectric and ferroelastic domains can be useful for optoelectronic devices and ferroelastic templates for strain coupled artificial magnetoelectric heterostructures.