White-flesh guava juice clarification by a fixed-angle conical rotor centrifuge laboratory and characterization of continuous disk stack centrifuges.

The two objectives of this paper were to determine the effect of centrifugation parameters on guava juice physicochemical characteristics and to identify operational characteristics of continuous disc-stack centrifuges based on the performance of a laboratory centrifuge. Effects of g-force (149 g-3731 g) and centrifugation time (10-40 min) on juice physicochemical characteristics (protein, pectin, galacturonic acid, dry matter, total soluble sugars contents; pH; electrical conductivity, clarity and particle size distribution) were assessed. Laboratory centrifuge performance was evaluated for 1343 g, 2388 g and 3731 g. At 1343 g, separation limits (x max ), feed flow-rates of disc-stack centrifuges and cut-off sizes (x 50 ) were determined for corresponding laboratory centrifuge operation times. Significant decrease in average particle size, protein and pectin contents was observed, contrary to juice clarity. Similar clarification efficiency was obtained for g-forces ≥ 1343 g. x max were 2669 nm, 2200 nm and 1783 nm, with corresponding x 50 for continuous centrifuges, 1887 nm, 1556 nm, 1261 nm, for 20 min, 30 min and 40 min, respectively.

Synthesis of grafted natural pozzolan with 3-aminopropyltriethoxysilane: preparation, characterization, and application for removal of Brilliant Green 1 and Reactive Black 5 from aqueous solutions.

Natural pozzolan is an amorphous silicate-based material of volcanic origin. In this work, the natural pozzolan was modified by using 3-aminopropyltriethoxysilane (APTES) as a grafting agent. This material was characterized by pHpzc, N2 adsorption/desorption curves, FTIR, TGA/DTG, DRUV, SEM, and elementary analysis. The functionalized materials were used for the removal of Reactive Black 5 (RB-5) and Brilliant Green 1 (BG-1) dyes from aqueous solutions using batch-contact adsorption. The characterization of modified pozzolan by FTIR, TGA/DTG, BET, and DRUV-vis revealed the effectiveness of grafting of amine functional group on pozzolan structure. The kinetic adsorption data were better fitted with general order for both dyes while for equilibrium models were better fitted by the Liu isotherm model. The maximum sorption capacities Q max (at 50 °C) obtained with the modified pozzolan were 350.6 and 300.9 mg g-1 for BG-1 and RB-5, at pH 9.0 and 2.0, respectively. The thermodynamic parameters show that the removal of dyes was spontaneous and endothermic. The modified material was also tested for the treatment of simulated dye house effluents showing very high efficiency.