Q-factor measurements through injection locking of a semiconductor-glass hybrid laser with unknown intracavity losses.

The injection locking properties of a newly developed waveguide-based external cavity semiconductor laser have been investigated. Using the injection locking properties to measure the Q-factor of complex optical cavities with unknown internal losses, has been demonstrated for the first time.

Photonic generation of stable microwave signals from a dual-wavelength Al2O3:Yb3+ distributed-feedback waveguide laser.

We report the fabrication and characterization of a dual-wavelength distributed-feedback channel waveguide laser in ytterbium-doped aluminum oxide. Operation of the device is based on the optical resonances that are induced by two local phase shifts in the distributed-feedback structure. A stable microwave signal at ~15 GHz with a -3 dB width of 9 kHz was subsequently created via the heterodyne photodetection of the two laser wavelengths. The long-term frequency stability of the microwave signal produced by the free-running laser is better than ±2.5 MHz, while the power of the microwave signal is stable within ±0.35 dB.

Ultra-narrow-linewidth, single-frequency distributed feedback waveguide laser in Al2O3:Er3+ on silicon.

We report the realization and performance of a distributed feedback channel waveguide laser in erbium-doped aluminum oxide on a standard thermally oxidized silicon substrate. The diode-pumped continuous-wave laser demonstrated a threshold of 2.2 mW absorbed pump power and a maximum output power of more than 3 mW with a slope efficiency of 41.3% versus absorbed pump power. Single-longitudinal-mode and single-polarization operation was achieved with an emission linewidth of 1.70+/-0.58 kHz (corresponding to a Q factor of 1.14 x 10(11)), which was centered at a wavelength of 1545.2 nm.