Development and Validation of Matrix of Chemistry, Manufacturing, and Control (MoCMC) System for Intramammary Drug Products (IMM).

PURPOSE: Products formulated for intramammary (IMM) infusion are intended for the delivery of therapeutic moieties directly into the udder through the teat canal to maximize drug exposure at the targeted clinical site, the mammary gland, with little to no systemic drug exposure. Currently, to our knowledge, there has been no in-vitro matrix system available to differentiate between IMM formulations. Our goal is to develop A custom tailored in-vitro "Matrix of Chemistry, Manufacturing and Control" (MoCMC) System to be a promising future tool for identifying inequivalent IMM formulations. MoCMC can detect inter and intra batch variabilities, thereby identifying potential generics versus brand product similarities or differences with a single numeric value and a specific & distinctive fingerprint. METHODS: The FDA-approved IMM formulation, SPECTRAMASTⓇ LC, was selected as the reference product for the MoCMC. Twelve in-house test formulations containing ceftiofur hydrochloride were formulated and characterized. The MoCMC was developed to include six input parameters and three output parameters. The MoCMC system was used to evaluate and compare SPECTRAMASTⓇ LC with its in-house formulations. RESULTS: Based on the MoCMC generated parameters, the distinctive fingerprints of MoCMC for each IMM formulations, and the statistical analyses of MCI and PPI values, in-house formulations, F-01 and F-02 showed consistency while the rest of in-house formulations (F-03-F-12) were significantly different as compared to SPECTRAMASTⓇ LC. CONCLUSION: This research showed that the MoCMC approach can be used as a tool for intra batch variabilities, generics versus brand products comparisons, post-approval formulations changes, manufacturing changes, and formulation variabilities.

Development and Validation of Discriminatory In-vitro Release Method for Intramammary Drug Product.

PURPOSE: Intramammary (IMM) formulations are locally acting and delivered intracisternally into the udder. No pharmacopeial in-vitro release method is available to differentiate between the IMM formulations. Our research aim is to develop in-vitro release methods that discriminate different IMM formulations (SPECTRAMAST® LC and in-house formulations). METHODOLOGY: Different in-house formulations were developed to simulate SPECTRAMAST® LC generics. SPECTRAMAST® LC and the in-house formulations were characterized for physicochemical attributes, such as particle size, rheology, drug content, sedimentation rate, and flocculation rate. The in-vitro release method was optimized by evaluating drug release using USP apparatuses 1, 2 (with and without enhancer/customized cells), and 4. Various test parameters, including medium effect (whole homogenized bovine milk versus aqueous buffer), medium volume (200-900 mL), and rotational speed (50-200 rpm) were investigated. RESULTS: Two potential in-vitro systems can be used as discriminatory methods for IMM formulations: USP apparatus 2 with the IMM formulation loaded into two containers a) customized formulation container (83.1 cm in height and 56.4 cm in width) or b) enhancer cells with their top adapted with mesh #40 (rotation speed:125 rpm and 900 mL of whole homogenized bovine milk). The release profile of SPECTRAMAST® LC at 1 h (99.8%) was not significantly different from formulations with similar physicochemical characteristics F-01 (99.1%) and F-02 (100.5%). Formulation with different physicochemical characteristics F-03 (44.3%) and F-04 (57.2%) showed slower release (1 h) than SPECTRAMAST® LC (98.8%). CONCLUSION: The developed in-vitro release methods can be used as a potential tool for in-vitro comparability evaluations for IMM formulations.

Bioavailability assessment of a brompheniramine taste-masked pediatric formulation in a juvenile porcine model.

A brompheniramine taste-masked pediatric formulation was developed as part of the National Institutes of Health Pediatric Formulation Initiative to help address low patient compliance caused by the bitter taste of many adult formulations. To confirm that the taste-masked formulation can provide a similar pharmacological effect to the previous marketed adult formulations, a juvenile porcine model was used to screen the model pediatric formulation to compare the bioavailability between the marketed brompheniramine maleate and the taste-masked maleate/tannate formulation. Pigs were dosed orally with both formulations and blood samples were obtained from 0 to 48 h. Plasma samples were prepared and extracted using solid-phase extraction. The mass spectrometer was operated under selected ion monitoring mode. The selected ion monitoring channels were set to m/z 319.1 for brompheniramine and m/z 275.2 for the internal standard chlorpheniramine. Calibration curves were linear over the analytical range 0.2-20 ng/ml (r2 > 0.995) for brompheniramine in plasma. The intra- and inter-day accuracies were between 98.0 and 105% with 5.73% RSD precision. The bioanalytical method was successfully applied to a preclinical bioavailability study. The bioavailability profiles were not significantly different between the two formulations, which demonstrates that taste-masking with tannic acid is a promising approach for formulation modification for pediatric patients.

Patient In-Use Stability Testing of FDA-Approved Metformin Combination Products for N-Nitrosamine Impurity.

Between February 2020 and January 2022, the Food and Drug Administration (FDA) recalled 281 metformin extended-release products due to the presence of N-nitrosodimethylamine (NDMA) above the acceptable daily intake (ADI, 96 ng/day). Our previous studies indicated presence of NDMA levels above ADI in both metformin immediate and extended-release products. When metformin products have NDMA impurities, it is indispensable to check for the same impurities in metformin combination products. Therefore, the objective of the present study was to evaluate in-use stability of commercial metformin combination products for NDMA. For this purpose, metformin products in combination with glyburide (GB1-GB12), glipizide (GP1-GP8), pioglitazone (P1-P3), alogliptin (A1, A2), and linagliptin (L1, L2) were repacked in pharmacy vials, stored at 30°C/75% RH for 3 months, and monitored for NDMA impurity. The NDMA level varied from 0 to 156.8 ± 32.8 ng/tablet initially and increased to 25.4 ± 5.1 to 455.0 ± 28.4 ng/tablet after 3 months of exposure to in-use condition. Initially, 18 products have NDMA level below ADI limit before exposure which decreased to 7 products (GB5, GP3, GP5, A1, A2, L1, and L2) meeting specification. In conclusion, in-use stability study provides quality and safety risk assessment of drug products where nitroso impurities are detected in the probable condition of use.

In Vitro and In Vivo testing of 3D-Printed Amorphous Lopinavir Printlets by Selective Laser Sinitering: Improved Bioavailability of a Poorly Soluble Drug.

The aim of this paper was to investigate the effects of formulation parameters on the physicochemical and pharmacokinetic (PK) behavior of amorphous printlets of lopinavir (LPV) manufactured by selective laser sintering 3D printing method (SLS). The formulation variables investigated were disintegrants (magnesium aluminum silicate at 5-10%, microcrystalline cellulose at 10-20%) and the polymer (Kollicoat® IR at 42-57%), while keeping printing parameters constant. Differential scanning calorimetry, X-ray powder diffraction, and Fourier-transform infrared analysis confirmed the transformation of the crystalline drug into an amorphous form. A direct correlation was found between the disintegrant concentration and dissolution. The dissolved drug ranged from 71.1 ± 5.7% to 99.3 ± 2.7% within 120 min. A comparative PK study in rabbits showed significant differences in the rate and extent of absorption between printlets and compressed tablets. The values for Tmax, Cmax, and AUC were 4 times faster, and 2.5 and 1.7 times higher in the printlets compared to the compressed tablets, respectively. In conclusion, the SLS printing method can be used to create an amorphous delivery system through a single continuous process.

Nitroso Impurities in Drug Products: An Overview of Risk Assessment, Regulatory Milieu, and Control Strategy.

Many nitrosamines have been recognized to be carcinogenic for many decades. Despite the fact that several nitrosamine precursors are frequently used in the manufacturing of pharmaceutical products, their potential presence in pharmaceutical products has previously been overlooked due to a lack of understanding on how they form during the manufacturing process. From the risk assessment, it is clear that nitrosamines or their precursors may be present in any component of the finished dosage form. As a risk mitigation strategy, components with a high potential to form nitrosamine should be avoided. In the absence of suitable alternatives, sufficient measures to maintain nitrosamines below acceptable intake levels must be applied. Excipient manufacturing pathways must be extensively studied in order to identify probable excipient components that may contribute to nitrosamine formation. The manufacturers must not solely rely on pharmacopeial specifications for APIs and excipients, rather, they should also develop and implement additional strategies to control nitrosamine impurities. The formulation can be supplemented with nitrosating inhibitors, such as vitamin C, to stop the generation of nitrosamine. The purpose of this review is to identify key risk factors with regard to nitrosamine formation in pharmaceutical dosage forms and provide an effective control strategy to contain them below acceptable daily intake limits.

Preparation and Characterization of 3D-Printed Dose-Flexible Printlets of Tenofovir Disoproxil Fumarate.

The aim of this work was to design pediatric-friendly, dose-flexible orally disintegrating drug delivery systems (printlets) of the antiviral drug tenofovir disoproxil fumarate (TDF) by selective laser sintering (SLS) for potential use in hospitals along with other antiviral drugs. In order to obtain a consistent quality of printlets with desired properties, it is important to understand certain critical quality attributes for their main and interactions effect. The printlets were optimized by Box-Behnken's design of the experiment by varying process variables while keeping the composition constant. The composition contained 16.3% TDF, 72.7% polyvinyl pyrrolidone K16-18, 8% magnesium aluminum silicate, 3% Candurin® NXT Ruby Red, and 0.3% colloidal silicon dioxide. The process variables studied were surface (X1), chamber temperatures (X2), and laser scanning speed (X3). The range of variable levels was 75-85°C for X1, 50-70°C for X2, and 200-240 mm/s for X3, respectively. The responses studied were hardness, disintegration time, dissolution, physiochemical, and pharmacokinetic characterization. X-ray powder diffraction indicated partial or complete conversion of the crystalline drug into amorphous form in the printlets. Comparative pharmacokinetics between Viread® (generic) and printlets in rats were superimposable. Pharmacokinetic parameters showed statistically insignificant differences between the two formulations in terms of Tmax, Cmax, and AUC of (p > 0.05). Printlets were bioequivalent to Viread® as per FDA bioequivalence criteria. Thus, the SLS printing method showed the fabrication of dose-flexible printlets with quality, and in vivo performance equivalent to commercial tablets.

Very-Rapidly Dissolving Printlets of Isoniazid Manufactured by SLS 3D Printing: In Vitro and In Vivo Characterization.

The focus of this research was to understand the effects of formulation and processing variables on the very-rapidly dissolving printlets of isoniazid (INH) manufactured by the selective laser sintering (SLS) three-dimensional (3D) printing method, and to characterize their physicochemical properties, stability, and pharmacokinetics. Fifteen printlet formulations were manufactured by varying the laser scanning speed (400-500 mm/s, X1), surface temperature (100-110 °C, X2), and croscarmellose sodium (CCS, %, X3), and the responses measured were weight (Y1), hardness (Y2), disintegration time (DT, Y3), and dissolution (Y4). Laser scanning was the most important processing factor affecting the responses. DT was very rapid (≥3 s), and dissolution (>99%) was completed within 3 min. The root-mean-square error in the studied responses was low and analysis of variance (ANOVA) was statistically significant (p < 0.05). X-ray micro-computed tomography (micro-CT) images showed very porous structures with 24.6-34.4% porosity. X-ray powder diffraction and differential scanning calorimetry data indicated partial conversion of the crystalline drug into an amorphous form. The printlets were stable at 40 °C/75% RH with no significant changes in assay and dissolution. Pharmacokinetic profiles of the printlets and compressed tablets were superimposable. In conclusion, the rapidly dissolving printlets of the INH were stable, and oral bioavailability was similar to that of compositionally identical compressed tablets.

HIV-1 Tat and cocaine impact astrocytic energy reservoir influence on miRNA epigenetic regulation.

Astrocytes are the primary regulator of energy metabolism in the central nervous system (CNS), and impairment of astrocyte's energy resource may trigger neurodegeneration. HIV infections and cocaine use are known to alter epigenetic modification, including miRNAs, which can target gene expression post-transcriptionally. However, miRNA-mediated astrocyte energy metabolism has not been delineated in HIV infection and cocaine abuse. Using next-generation sequencing (NGS), we identified a total of 1900 miRNAs, 64 were upregulated and 68 miRNAs were downregulated in the astrocytes by HIV-1 Tat with cocaine exposure. Moreover, miR-4727-3p, miR-5189-5p, miR-5090, and miR-6810-5p expressions were significantly impacted, and their gene targets were identified as VAMP2, NFIB, PPM1H, MEIS1, and PSD93 through the bioinformatic approach. In addition, the astrocytes treated with the nootropic drug piracetam protects these miRNAs. These findings provide evidence that the miRNAs in the astrocytes may be a potential biomarker and therapeutic target for HIV and cocaine abuse-induced neurodegeneration.

Evaluation of handling, storage, and disposal practices of oral anticancer medications among cancer patients and their caregivers at home setting in the Princess Noorah Oncology Center.

BACKGROUD: Oral medications are commonly prescribed for many cancer patients. Unfortunately, most of them are dispensed without proper counseling about handling practices. We aimed to evaluate the handling, storage, and disposal practices of oral anticancer medications among cancer patients and their caregivers at home. METHODS: A cross-sectional questionnaire was filled in by adult cancer patients or caregivers who received oral anticancers and/or visited an outpatient pharmacy over two months. RESULTS: A total of 201 participants were interviewed, 67% were female, and nearly 44% were between 40 and 60 years of age. The majority of participants were educated (78%). The top five medications involved were: tamoxifen, capecitabine, letrozole, dasatinib, and imatinib. More than 95% of participants reported that medications were kept away from children and pets in the original container and stored away from extreme heat, cold, and humidity. Hand washing and wearing gloves were not consistently practiced. Only 5% reported "Always" wearing gloves, while 24% reported "Always" washing hands after handling anticancer medications. The participants reported that they had been informed about safe handling and storage by their physician (39%) and pharmacist (25%), while 34% had not been informed. In terms of disposal practices, 66% of patients have not had any unused or expired medications, 29% disposed them in the trash, and 27% returned them. CONCLUSIONS: Our findings suggest that patients and caregivers' handling practices of oral anticancer medications are inconsistent with the published recommendations. Hence, appropriate and comprehensive education is needed to mitigate the risk of exposure to these agents in the home setting.

Preparation and characterization of dicarboxylic acids salt of aripiprazole with enhanced physicochemical properties.

The focus of present work was to prepare salt of aripiprazole (APZ) with dicarboxylic acids to improve physicochemical properties the drug. Dicarboxylic acids used in the study were malonic acid, maleic acid and succinic acid. The salts were prepared with solubilization-crystallization method. The salts were characterized for pH-solubility, dissolution, and stabilities. The Fourier infrared spectroscopy, X-ray powder diffraction, differential scanning calorimetry and near infrared chemical imaging indicated formation of new solid phase. pH-solubility profiles of the salts were similar to the drug except higher solubility were observed in the salts at all tested pH. The highest solubility was observed for APZ-Malonate salt among all the prepared salts. The solubility curve was inverted 'V' shape for APZ-maleate and APZ-succinate while it was inverted 'U' shape for APZ-malonate. The water solubility of APZ, APZ-malonate, APZ-maleate and APZ-succinate were 0.07 ± 0.02, 3503.9 ± 37.4, 269.3 ± 6.9 and 729.4 ± 9.4 µg/mL, respectively. The dissolution was 2.9 ± 0.4, 18.4 ± 3.9, 19.5 ± 1.4 and 36.6 ± 4.0% in 45 min for APZ, APZ-maleate, APZ-malonate, and APZ-succinate. The stabilities of the salts were similar to the drug. Thus, salts improved the physicochemical properties of the drug, and have similar stability profiles as that of APZ.

Potential Application of USP Paddle and Basket Dissolution Methods in Discriminating for Portioned Moist Snuff and Snus Smokeless Tobacco Products.

The focus of the study was to develop discriminatory dissolution methods for portioned snus and moist snuff sub-categories of smokeless tobacco products (STPs) using USP basket and paddle apparatuses. Skoal Classic Wintergreen (SCW) and CORESTA CRP1.1 pouches were used as test products. The dissolution was performed at 10, 20, 30, 40, and 50 rpm basket or paddle speed in 500 ml artificial saliva pH 6.8. The products were also characterized for assay, pH, particle size, and loss on drying. The dissolution profiles were evaluated for amount/% of nicotine dissolved, time to reach plateau, and profiles comparison by f2 and f1 factors. The nicotine assay was 13.3 ± 0.2 and 7.6 ± 0.1 mg/pouch for SCW and CRP1.1, respectively. The nicotine dissolved in 30 min from SCW and CRP1.1 were 38.4-81.8 and 37.6-88.1, and 50.5-64.9 and 72.3-92.1% by paddle and basket methods, respectively. The f2 and f1 values were ≤ 39.2 and ≥ 42.1 and ≤ 43.2 and ≥ 34.1 for basket methods and paddle methods. RSD were less than 20% at all points of dissolution profiles, and dissolution plateau were achieved in 30 min at some of the tested conditions. In summary, dissolution methods based on basket and paddle can be used as a performance test for STPs.

Preparation and Characterization of Stable Amorphous Glassy Solution of BCS II and IV Drugs.

The focus of the present investigation was to develop amorphous glassy solutions (AGSs) of BCS Class II and IV drugs using sucrose acetate isobutyrate (SAIB). The drugs studied were rifaximin (RFX), dasatinib (DST), aripiprazole (APZ), dolutegravir (DLT), cyclosporine (CYS), itraconazole (ITZ), tacrolimus (TAC), sirolimus (SRL), aprepitant (APT), and carbamazepine (CBZ). AGSs were prepared by dissolving known quantity of the drug in the SAIB at 120 (TAC and APZ), 140 (CYS) or 150 oC (RFX, DST, DLT, ITZ, SRL, APT, and CBZ). They were characterized visually and by NIR, NIR hyperspectroscopy (NIR-H), and XRPD. Stability were determined by exposing open vials to 40 oC/75% RH for a week. AGSs behave like a glassy solid at room temperature and liquified above 60 oC. The solubility of APT, DLT, SRL, APZ, RFX, CBZ, TAC and CYS in SAIB was 0.4±0.0, 1.7±0.4, 1.9±0.0, 21.6±2.6, 36.4±0.9, 76.5±4.0, 115.1±2.3, and 239.0±12.6 mg/g, respectively. NIR, NIR-H, and XRPD data indicated the amorphous nature of the AGSs. Furthermore, AGSs were stable against devitrification on exposure to high temperature and humidity. In summary, SAIB can be employed to develop stable AGSs of poorly soluble drugs to increase dissolution, and oral bioavailability with the addition of hydrophilic excipients.

Salt Engineering of Aripiprazole with Polycarboxylic Acids to Improve Physicochemical Properties.

Aripiprazole (APZ) has poor physicochemical properties and bitter taste. The current study aimed to prepare salts of APZ with polycarboxylic acids (citric, malic, and tartaric acids) to improve physicochemical properties and impart sour taste to the drug. The salts were prepared by solubilization-crystallization method, and characterized by electron microscopic, spectroscopic, diffractometry, and thermal methods. The salts were assessed for pH solubility, pH-stability, dissolution, and solid-state stability. Fourier transformed infrared, X-ray powder diffraction, and differential scanning calorimetry data indicated formation of new solid phases. APZ and the salts exhibited pH-dependent solubility. The pH solubility curve shape was inverted "V," inverted "W," and inverted "U" for APZ, APZ-Citrate, and APZ-Malate and APZ-Tartrate, respectively. Compared to APZ, the solubility of salts at pH 4, 5, and 6 was 3.6-7.1, 23.9-31.5, and 143.4-373.3 folds of APZ. Increase in solubility in water by citrate, malate, and tartrate salts was 5562.8, 21,284.7, and 22,846.7 folds of APZ. The salt formation also leads to an increase in rate and extent of dissolution. The dissolution extent was 3.5 ± 0.5, 71.3 ± 1.2, 80.1 ± 6.2, and 86.1 ± 1.1% for APZ, APZ-Citrate, APZ-Malate, and APZ-Tartrate, respectively. Liquid and solid-state stabilities of the salts were comparable to APZ. In conclusion, salts of APZ with polycarboxylic acids improved solubility, and dissolution, and impart sour taste, which may improve palatability of the drug.

Coating characterization by hyperspectroscopy and predictive dissolution models of tablets coated with blends of cellulose acetate and cellulose acetate phthalate.

The objective of current research was to develop the models of dissolution prediction of tablets coated with cellulose acetate (CA 320S or CA 398-10) and cellulose acetate phthalate (C-A-P) blends. Independent variables selected were coating percent (X1) and percent of CA 320S or CA 398-10 (X2) in the blend. Dependent variables selected were dissolution in 1 (Y1), 8 (Y2), and 24 h (Y3). Diclofenac sodium core tablets were coated with blend of either CA 320S and C-A-P or CA 398-10 and C-A-P at approximately 5, 7.5, and 10% weight gain. CA 320S and CA 398-10 content in the corresponding blends varied from 33.3-66.7% and 25.0-50.0% relative to C-A-P, respectively. Dissolution was performed in phosphate buffer 6.8 using USP apparatus 2. Coated tablets were also characterized for surface morphology and coating uniformity by near infrared hyperspectroscopy. Y1, Y2, and Y3 were statistically (p < 0.05) affected by X2 in CA 320S/C-A-P and CA 398-10/C-A-P blends coated tablets. On the other hand, X1 had statistically significant (p < 0.05) effect only on the Y3 in CA 320S/C-A-P while Y1 was statistically (p < 0.05) affected by X2 in CA 398-10/C-A-P. Analysis of variance also indicated statistically significant (p < 0.05) effect of the studied variables on the dependent variables for both the blends. The models were verified by independent experiment. Model predicted and empirical values of Y1, Y2, and Y3 were close with maximum residual of 7.0%. In conclusion, dissolution can be modulated by varying composition of blend, polymer type, and coating weight.

Evaluation of a pharmacist vs. Haematologist-managed anticoagulation clinic: A retrospective cohort study.

INTRODUCTION: Warfarin is the core component in the management of various thromboembolic disorders, which requires specialized expertise to optimize outcomes. There is limited data comparing a pharmacist vs. a haematologist-managed anticoagulation clinic in our setting, and in the Middle East. We aimed to evaluate the effectiveness and safety of a pharmacist vs. a haematologist-managed anticoagulation clinic in the Ambulatory Care Center at King Abdulaziz Medical City, Jeddah, Saudi Arabia. METHODS: A retrospective cohort study was conducted from 2016 to 2018, which included adult patients who have been followed-up for at least six months and who received warfarin for an extended period. The primary outcome was the proportion of time the patients in the two arms were in the therapeutic range. The secondary outcomes were the differences in expanded time in the therapeutic range, as well as the frequency of bleeding and thromboembolic events between the two arms. RESULTS: We enrolled 104 and 124 patients in the pharmacist and haematologist arms respectively. The median time in the therapeutic range for the pharmacist arm was 71.4%, IQR (60.8-83.8) vs. 65%, IQR (43.5-79.1), in the haematologist arm (p = 0.0049). The median expanded time in the therapeutic range was 86.4%, IQR (77.5-95.3) vs. 81.21%, IQR (67.1-93.3) in the pharmacist vs. haematologist arm (p = 0.015) respectively. Major bleeding events occurred in 5.7 % vs. 3.2 %, and thromboembolic events in 5.7% vs. 4%, in the pharmacist vs. haematologist arm respectively. CONCLUSIONS: Our results demonstrated that the time in the therapeutic range was significantly higher in the pharmacist arm, with no significant difference in bleeding and thromboembolic events compared to the haematologist arm.

Selective laser sintering 3D printing - an overview of the technology and pharmaceutical applications.

Food and Drug Administration (FDA) has approved a drug product (Spritam®) and many medical devices manufactured by three-dimensional printing (3DP) processes for human use. There is immense potential to print personalized medicines using 3DP. Many 3DP methods have been reported in the literature for pharmaceutical applications. However, selective laser sintering (SLS) printing has remained least explored for pharmaceutical applications. There are many advantages and challenges in adopting a SLS method for fabrication of personalized medicines. Solvent-free nature, availability of FDA approved thermoplastic polymer/excipients (currently used in hot melt-extrusion process), minimal/no post-processing step, etc. are some of the advantages of the SLS printing process. Major challenges of the technology are requirement of at least one thermoplastic component in the formulation and thermal stability of drug and excipients. This review provides an overview of the SLS printing method, excipient requirements, process monitoring, quality defects, regulatory aspects, and potential pharmaceutical applications.

Effects of Diluents on Physical and Chemical Stability of Phenytoin and Phenytoin Sodium.

The focus of the present work was to investigate compatibility between commonly used diluents and the drug (salt and acid form of the phenytoin). Lactose monohydrate (LMH), lactitol hydrate (LCT), and mannitol (MNT) were selected based on commercial products information of phenytoin sodium (PS) and phenytoin acid (PHT). Binary mixtures of the drug-diluent were stored at 60°C and 40°C/75% RH. Similarly, two commercial products, namely Product-A and Product-B, were also investigated in in-use stability. Color of PS-LMH changed from white to yellowish-brown and pH dropped by 3.4 units after 4 weeks exposure. FTIR, XRPD, and NIR chemical images indicated disproportionation in PS-LMH and PS-LCT mixtures stored at 40°C/75% RH. Furthermore, PS-LMH also indicated chemical interactions as indicated by distortion of LMH peaks. PHT-diluent mixture did not exhibit any physical and chemical modifications. Product-A changed color, increased weight, dropped pH value, and exhibited disproportionation and chemical reactions. The dissolution of Product-A decreased from 83.3 ± 1.4 to 7.1 ± 4.4% on 8 weeks exposure to 30°C/75% RH. On the other hand, Product-B did not change; however, dissolution decreased by 15%. In conclusion, PS showed disproportionation and chemical reactions with LMH. Therefore, LMH should be avoided in PS formulations.

Formulation Optimization of Selective Laser Sintering 3D-Printed Tablets of Clindamycin Palmitate Hydrochloride by Response Surface Methodology.

The aims of the current study were to develop and evaluate clindamycin palmitate hydrochloride (CPH) 3D-printed tablets (printlets) manufactured by selective laser sintering (SLS). Optimization of the formulation was performed by studying the effect of formulation and process factors on critical quality attributes of the printlets. The independent factors studied were laser scanning speed, microcrystalline cellulose (MCC), and lactose monohydrate (LMH) concentration. The responses measured were printlets weight, hardness, disintegration time (DT), and dissolution in 30 min. The printlets were characterized for content uniformity, chemical interactions, crystallinity, drug distribution, morphology, and porosity. The laser scanning speed showed statistically significant effects on all the studied dependent responses (p < 0.05). MCC showed statistically significant effects on hardness, DT, and dissolution (p < 0.05), while LMH showed statistically significant effect on hardness and dissolution (p < 0.05). The model was validated by an independent formulation, and empirical values were in close agreement with model-predicted values. X-ray powder diffraction and differential scanning calorimetry data suggested a decrease in crystallinity of the LMH in the printlets. X-ray micro-CT scanning showed porous microstructure of the printlets with a porosity 24.4% and 31.1% for the printlets printed at 200 and 300 mm/s laser speed, respectively. In summary, the SLS method provides an opportunity to fabricate customized dosage forms as per patients' need.

Development of Abuse-Deterrent Formulations Using Sucrose Acetate Isobutyrate.

The objective of the present investigation was to understand the effect of sucrose acetate isobutyrate (SAIB) on abuse-deterrent properties (ADPs) of abuse-deterrent formulations (ADFs) based on Polyox™. SAIB would enhance ADPs of Polyox™-based formulations due to its glassy liquid and hydrophobic properties. Formulations were prepared by granulation followed by compression and heat curing at 90°C. The formulations were evaluated for surface morphology, hardness, manipulation in coffee grinder, particle size distribution, drug (pseudoephedrine hydrochloride) extraction in water, alcohol, 0.1 N HCl, 0.1 N NaOH at room temperature and elevated temperature using microwave and oven, syringeability and injectability, and dissolution. The heat curing of formulations significantly increased the hardness (> 490 N). Addition of SAIB imparted elasticity to formulations and decreased brittleness as indicated by lower values of work done and gradient compared to control formulations. After grinding, about 7.7-25.6% of the powder remained on the sieve (1 mm pore opening), D90 was 53.1-136.7 µm more, and Q (fraction < 500 µm) was 17.8-40.7% less in SAIB-based formulations compared to control formulations. Drug extraction between control and test intact formulations was similar. However, drug extraction was 23.9-42.5% (water), 20.6-26.1% (0.1 N HCl), and 37.4-50.6% (0.1 N NaOH) less in SAIB-based powder cured and uncured formulations compared to control formulations. Dissolution varied from 65.6 ± 4.2 to 97.6 ± 4.0% in 9 h from the formulations. In conclusion, addition of SAIB to Polyox™-based ADFs has synergistic effect on ADPs. This would further decrease potential of drug abuse/misuse by various routes.