RESUMO
Numerous attempts have been made to produce new materials and technology for renewable energy and environmental improvements in response to global sustainable solutions stemming from fast industrial expansion and population growth. Zeolites are a group of crystalline materials having molecularly ordered micropore arrangements. Over the past few years, progress in zeolites has been observed in transforming biomass and waste into fuels. To ensure effective transition of fossil energy carriers into chemicals and fuels, zeolite catalysts play a key role; however, their function in biomass usage is more obscure. Herein, the effectiveness of zeolites has been discussed in the context of biomass transformation into valuable products. Established zeolites emphasise conversion of lignocellulosic materials into green fuels. Lewis acidic zeolites employ transition of carbohydrates into significant chemical production. Zeolites utilise several procedures, such as catalytic pyrolysis, hydrothermal liquefaction, and hydro-pyrolysis, to convert biomass and lignocelluloses. Zeolites exhibit distinctive features and encounter significant obstacles, such as mesoporosity, pore interconnectivity, and stability of zeolites in the liquid phase. In order to complete these transformations successfully, it is necessary to have a thorough understanding of the chemistry of zeolites. Hence, further examination of the technical difficulties associated with catalytic transformation in zeolites will be required. This review article highlights the reaction pathways for biomass conversion using zeolites, their challenges, and their potential utilisation. Future recommendations for zeolite-based biomass conversion are also presented.
Assuntos
Zeolitas , Zeolitas/química , Biomassa , Catálise , Pirólise , Ácidos de LewisRESUMO
Freshwater sources are limited and access to clean water is an acute challenge in recent decades. The sustainable water treatments methods are need of time and water desalination is one of the most interesting technology. Most desalination technologies are required high energy input while Microbial Desalination Cells (MDCs) represent a sustainable option that has added benefit of solving the ever-increasing wastewater treatment and management problem. MDCs are a customized type of Microbial Fuel Cells (MFCs) that depend on the electric potential generated by organic media to decrease salt concentration by electro-dialysis and give an unconventional way of clean water production. In this research, various experiments were conducted to examine the desalination ability of an indigenously designed experimental setup using domestic wastewater inoculated with sewage sludge under identical conditions. The electrochemical properties of the system, comprising the polarization curve and Electrochemical Impedance Spectroscopy (EIS), were examined along with the scope of chemical oxygen demand (COD) exclusion, to distinguish the cell behaviour. Furthermore, acidic water and Phosphate Buffer Solution (PBS) were tested as potential catholytes compared to the performance of the wastewater was gauged at various salt concentrations. The maximum salt removal efficiency was 31%, power density and current density were 32 mW-m-2 and 246 mA-m-2 respectively at a salt concentration of 35 g-L-1 that decreases with a decline in salt concentration. The maximum achieved power density and current density were 32 mW-m-2 and 246 mA-m-2 respectively. The applied method has huge potential to scaleup for large scale application in coastal regions.
Assuntos
Fontes de Energia Bioelétrica/microbiologia , Esgotos/microbiologia , Águas Residuárias/microbiologia , Purificação da ÁguaRESUMO
Fossil and renewable fuels are used by industrial units that produce energy-intensive products. Competitive fuel pricing encourages these fuel sources' usage globally, particularly in developing nations, which leads to large volumes of byproducts like fly ash among thermal power plant operators. The elements and compounds found in coal fly ash (CFA) and biomass fly ash (BFA) can be utilized through several engineering applications. This study aims to assess typical CFA and BFA samples quantitatively and qualitatively via techniques such as ultimate analysis (CH-S), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray fluorescence (XRF) elemental analysis, and ash fusion temperature (AFT), to anticipate the ideal ratios of coal to biomass blends for combustion applications while adhering to environmental regulations. The optimal blend, consisting of 75 % CFA and 25 % BFA, exhibited improved carbon (C%) and hydrogen (H%) percentages, increasing from 2.5 % to 4.67 % and from 0 % to 0.12 %, respectively. These improvements were further confirmed by the observed functional groups in FTIR, indicating a rising trend in both carbon and hydroxyl groups from BFA to CFA. XRF and XRD also confirmed it and TGA also showed optimum mass loss (ML%) behavior of 14.55 % for 75CFA + 25BFA. According to slagging and fouling indices, the values of RB/A, Rs, and Fu indicate a reduction in slagging and fouling issues through the blending of CFA with BFA. Simultaneously, the fusion temperature increased from 1181 °C to 1207 °C. CFA was found to increase the AFT of the BFA from 1197 °C to 1247 °C, mitigating their propensity. This suggests that a blend of 75CFA + 25BFA results in lower to medium range of slagging and fouling. However, AFI and BAI indicate a slightly higher range. AFT analysis further validates the conclusions drawn from the indices. The ternary phase diagram shows that the ash's melting point increases in the optimum blend. This is attributed to a reduced content of K2O (<15 %) and increased proportions of >50 % CaO and SiO2, effectively inhibiting slagging, agglomeration, and deposition. Meanwhile, the blend maintains a medium level of acidity and susceptively to corrosion, as observed in the case of 75CFA + 25BFA. The identification of optimal blend ratios can be anticipated to offer essential solutions for future research, aiming to ensure smooth industrial operations and regulatory compliance in power plants.
RESUMO
Flexible capacitive energy storage applications require polymer nanocomposites with high dielectric properties, which can be accomplished by addition of inorganic nanofillers to the polymer matrix. Low-density polyethylene (LDPE), known for its good dielectric characteristics and wide use in electrical insulation have been investigated for the desired applications. However, the improvement of its breakdown strength still continues with the use of various nanomaterials employed as nanofillers. In this study, a waste-derived material known as biomass fly ash (BFA) as a nanofiller to improve the dielectric properties of LDPE has been explored. BFA exhibits versatility in its composition with various metal oxides, making it an attractive choice as a nanofiller. The BFA-LDPE sheets were prepared using a conventional solvent mixing and subsequent hot-pressing process, incorporating BFA loadings ranging from 1 % to 4 wt%. The effects of different BFA loadings were carefully examined, and the synthesized nanocomposites were extensively characterized using various characterization methods, such as XRD, SEM, FTIR, TGA and dielectric constant measurements, to investigate the crystallographic properties, morphology, chemical composition, and thermal stability. Among all the nanocomposites, 4 wt%BFA-LDPE exhibited the highest dielectric constant, with a value of 11.58, compared to simple LDPE that had a dielectric constant of 8.33. This improvement is ascribed to the synergistic effects of different inorganic metal oxides (SiO2, MgO, and Fe2O3) present in BFA. The results showed a significant enhancement in dielectric properties, indicating that the waste-derived BFA can be purposefully applied as an effective nanofiller in the LDPE-based composites with even less than 4% loading for electrical insulating applications in future studies.
RESUMO
In this era, renewable energy technologies are suitable to meet the challenges of fossil fuel depletion and global warming. Thus, hydrogen is gaining attention as an alternative clean energy carrier that can be produced from various methods, one of them is the iodine-sulfur (I-S) cycle which is a thermochemical process. The I-S cycle requires a material that can withstand an extremely corrosive environment at high temperatures. Immersion tests were conducted on bare superalloy Hastelloy X (HX), MoSi2, and SiC-MoSi2 coated HX, deposited in physical vapor deposition (PVD) to evaluate their corrosion resistance. Bare HX exhibited a high corrosion rate of 208.1 mm yr-1 when exposed to 98 wt% sulfuric acid at 300 °C. In contrast, HX with MoSi2 coating showed a much lower corrosion rate of 23.5 mm yr-1, and HX with SiC-MoSi2 coating demonstrated the lowest corrosion rate at 6.5 mm yr-1 under the same conditions. The coated samples were analyzed via FESEM before and after corrosion testing. The FESEM images reveal the formation of coalescent particles on the surface of the coating. The elemental analysis illustrates an increased concentration of silicon and oxygen in the corroded samples. Elemental mapping of these samples show a uniform distribution of elements over the sample. These findings contribute not only to materials science understanding but also to practical applications in hydrogen production via the I-S cycle, where corrosion-resistant materials are critical.
RESUMO
In this research, a dielectric barrier discharge (DBD) reactor is used to study the cracking of the toluene into C1-C6 hydrocarbons. The combined effect of parameters such as temperature (20-400 °C) and plasma power (10-40 W) was investigated to evaluate the DBD reactor performance. The main gaseous products from the decomposition of toluene include lower hydrocarbon (C1-C6). The cracking of toluene increases with power at all temperatures (20-400 °C). On the otherhand, it decreases from 92.8 to 73.1% at 10 W, 97.2 to 80.5% at 20, 97.5 to 86.5% at 30 W, and 98.4 to 93.7% at 40 W with raising the temperature from 20 to 400 °C. Nonetheless, as the temperature and plasma input power increase, the methane yield increases. At 40 W, the maximum methane yield was 5.1%. At 10 and 20 W, the selectivity to C2 increases as the temperature rises up to 400 °C. At 30 and 40 W, it began to drop after 300 °C due to the formation of methane and the yield of methane increases significantly beyond this temperature.
RESUMO
Due to concerns over rising emissions of carbon dioxide (CO2) from fossil fuel utilization, there has been a strong emphasis on the development of a safe, economical, practical method of carbon capture utilization and storage (CCUS). One way to reduce these CO2 emissions is underground geological sequestration in depleted oil fields or exhausted reservoirs. CO2 injection into oil reservoirs is an established technology, these reservoirs not only offer the potential for high storage of CO2 but this process could also target a large amount of oil and gas recovery through a technique called enhanced oil recovery (EOR). The main objective of this research was to evaluate the storage potential of CO2 in the depleted oil field while also investigating the effect of CO2 injection on reservoir pressure maintenance, and additional oil and gas recovery, in the same field. This paper presented the model of CO2 flooding based on the CO2 displacement mechanism with different scenarios of natural depletion, CO2 injection, and water injection simulated by the ECLIPSE 300 reservoir simulator, and the results of different scenarios were compared. Results of this study showed the site selected for CO2 injection has the potential to store more than 9 billion cubic feet (BCF) of CO2 in each case and witnessed improved gas recovery, while also having a major effect on reservoir pressure maintenance where pressure increased from 2120 psi to 6584 psi. The finding of this work ought to help in preparing for future improvement in underground geological sequestration of CO2 in depleted fields with the same field specifications.
RESUMO
Nondestructive characterization of solid oxide fuel cell (SOFC) materials has drawn attention owing to the advances in instrumentation that enable in situ characterization during high-temperature cell operation. X-ray photoelectron spectroscopy (XPS) is widely used to investigate the surface of SOFC cathode materials because of its excellent chemical specificity and surface sensitivity. The XPS can be used to analyze the elemental composition and oxidation state of cathode layers from the surface to a depth of approximately 5-10 nm. Any change in the chemical state of the SOFC cathode at the surface affects the migration of oxygen ions to the cathode/electrolyte interface via the cathode layer and causes performance degradation. The objective of this article is to provide a comprehensive review of the adoption of XPS for the characterization of SOFC cathode materials to understand its degradation mechanism in absolute terms. The use of XPS to confirm the chemical stability at the interface and the enrichment of cations on the surface is reviewed. Finally, the strategies adopted to improve the structural stability and electrochemical performance of the LSCF cathode are also discussed.
RESUMO
COVID-19 has destabilized the global economy, disrupted the lives of billions of people globally, and caused the workforce to suffer. Furthermore, the spread of this disease has caused most nations to impose strict lockdown regulations and shutdown most industries. This study aimed to highlight the key issues of energy project performance alongside construction activities that were halted during the COVID-19 outbreak to follow social distancing, lockdown, and public safety parameters. A questionnaire survey was administered to accomplish the purpose of this study. The responses of 42 energy project professionals and experts were evaluated using the analytical hierarchy process (AHP) for group decision-making. AHP shows that the biggest influences on project performance during COVID-19 pandemic were government measures and personal factors. The findings provide insight to support energy project planning and management during and after the pandemic, including prioritization of labor force health and safety.
RESUMO
Methane is the main component of biogas, which could be used as a renewable energy source for electricity, source of heat, and biofuel production after upgrading from biogas. It also contains toxic compounds which cause environmental and human health problems. Therefore, in this work, the removal of a toxic compound (toluene) from methane gas was studied using a dielectric barrier discharge (DBD) reactor. It was observed that the removal of the toxic compound could be achieved from methane carrier gas using a dielectric barrier discharge reactor, and it depends on plasma input power. The maximum removal of the toxic compound was 85.9% at 40 W and 2.86 s. The major gaseous products were H2 and lower hydrocarbons (LHC) and the yield of these products also increases with input power. In the current study, the yield of gaseous products depends on the decomposition of toxic compounds and methane, because the decomposition of methane also produces H2 and lower hydrocarbons. The percentage yield of H2 increases from 0.43-4.74%. Similarly, the yield of LHC increases from 0.56-7.54% under the same reaction conditions. Hence, input power promoted the decomposition of the toxic compound and enhanced the yield of gaseous products.
RESUMO
Agro-Wastes are identified as to manufacture potential valuable organic biochar fertilizer product economically while also managing the waste. Biochar (BC) produced from agriculture waste is helps to improve the soil because of its neutral pH, addition of organic carbon to the soil and lower salt index values. This study focused on the development of nano-biochar into a more enhanced biochar product where it was checked whether the biochar derived from wheat straw can absorb nutrients and then act as support matter for releasing micro-nutrients and macro-nutrients for the plants on slow liberation basis. Wheat biochar (WBC) and wheat nano-biochar (WBNC) were synthesized by pyrolysis at two different temperatures and nutrients were fused into the WBC via impregnation technique. Physical parameters such as Proximate, Ultimate analysis & other were also studied and inspected by standard control procedures. Studies were also carried out on water retention (WR), water absorbance (WA), swelling ratio (SR) and equilibrium water content (EWC) for all samples; data was collected and compared for the better sample. Slow-release studies performed portrayed the release pattern of nutrients for prolonged periods, which are very important for the plant growth, yield and productivity. Overall, the experimental results displayed that BNC produced at 350 °C showed promising features of (SI:0.05, SR: 3.67, WA:64%, EWC:78.6%, FC:53.05% and pH:7.22), is a good substance however the nano-biochar has improved results; environmental friendly & could be utilized as a potential fertilizer on slow release for sustainable and green agriculture application.
Assuntos
Fertilizantes , Triticum , Agricultura , Carvão VegetalRESUMO
It is extremely prudent and highly challenging to design a greener bifunctional electrocatalyst that shows effective electrocatalytic activity and high stability toward electrochemical water splitting. As several hundred tons of catalysts are annually deactivated by deposition of carbon, herein, we came up with a strategy to reutilize spent methane reforming catalysts that were deactivated by the formation of graphitic carbon (GC) and carbon nanofibers (CNF). An electrocatalyst was successfully synthesized by in situ deposition of noble metal-free MoS2 over spent catalysts via a hydrothermal method that showed exceptional performance regarding the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). At 25 mA cm-2, phenomenal OER overpotentials (η25) of 128 and 154 mV and modest HER overpotentials of 186 and 207 mV were achieved for MoS2@CNF and MoS2@GC, respectively. Moreover, OER Tafel slopes of 41 and 71 mV dec-1 and HER Tafel slopes of 99 and 107 mV dec-1 were obtained for MoS2@CNF and MoS2@GC, respectively. Furthermore, the synthesized catalysts exhibited good long-term durability for about 18 h at 100 µA cm-2 with unnoticeable changes in the linear sweep voltammetry (LSV) curve of the HER after 1000 cycles. The carbon on the spent catalyst increased the conductivity, while MoS2 enhanced the electrocatalytic activity; hence, the synergistic effect of both materials resulted in enhanced electrocatalysts for overall water splitting. This work of synthesizing enhanced nanostructured electrocatalysts with minimal usage of inexpensive MoS2 gives a rationale for engineering potent greener electrocatalysts.
RESUMO
OBJECTIVE: A major factor in practical application of photobioreactors (PBR) is the adhesion of algal cells onto their inner walls. Optimized algal growth requires an adequate sunlight for the photosynthesis and cell growth. Limitation in light exposure adversely affects the algal biomass yield. The removal of the biofilm from PBR is a challenging and expansive task. This study was designed to develop an inexpensive technique to prevent adhesion of algal biofilm on tubular PBR to ensure high efficiency of light utilization. Rubber balls with surface projections were introduced into the reactor, to remove the adherent biofilm by physical abrasion technique. RESULTS: The floatation of spike balls created a turbulent flow, thereby inhibiting further biofilm formation. The parameters such as, specific growth rate and doubling time of the algae before introducing the balls were 0.451 day-1 and 1.5 days respectively. Visible biofilm impeding light transmission was formed by 15-20 days. The removal of the biofilm commenced immediately after the introduction of the spike balls with visibly reduced deposits in 3 days. This was also validated by enhance cell count (6.95 × 106 cells mL-1) in the medium. The employment of spike balls in PBR is an environmental friendly and economical method for the removal of biofilm.