RESUMO
In this study, the characteristics of the SKD61 material used for the stem of an extruder were analyzed through structural analysis, tensile testing, and fatigue testing. The extruder works by pushing a cylindrical billet into a die with a stem to reduce its cross-sectional area and increase its length, and it is currently used to extrude complex and diverse shapes of products in the field of plastic deformation processes. Finite element analysis was used to determine the maximum stress on the stem, which was found to be 1152 MPa, lower than the yield strength of 1325 MPa obtained from tensile testing. Fatigue testing was conducted using the stress-life (S-N) method, considering the characteristics of the stem, and statistical fatigue testing was employed to create an S-N curve. The predicted minimum fatigue life of the stem at room temperature was 424,998 cycles at the location with the highest stress, and the fatigue life decreased with increasing temperature. Overall, this study provides useful information for predicting the fatigue life of extruder stems and improving their durability.
RESUMO
OBJECTIVES: To evaluate the accuracy of fully automatic segmentation of pharyngeal volume of interests (VOIs) before and after orthognathic surgery in skeletal Class III patients using a convolutional neural network (CNN) model and to investigate the clinical applicability of artificial intelligence for quantitative evaluation of treatment changes in pharyngeal VOIs. METHODS: 310 cone-beam computed tomography (CBCT) images were divided into a training set (n = 150), validation set (n = 40), and test set (n = 120). The test datasets comprised matched pairs of pre- and post-treatment images of 60 skeletal Class III patients (mean age 23.1 ± 5.0 years; ANB<-2°) who underwent bimaxillary orthognathic surgery with orthodontic treatment. A 3D U-Net CNNs model was applied for fully automatic segmentation and measurement of subregional pharyngeal volumes of pre-treatment (T0) and post-treatment (T1) scans. The model's accuracy was compared to semi-automatic segmentation outcomes by humans using the dice similarity coefficient (DSC) and volume similarity (VS). The correlation between surgical skeletal changes and model accuracy was obtained. RESULTS: The proposed model achieved high performance of subregional pharyngeal segmentation on both T0 and T1 images, representing a significant T1-T0 difference of DSC only in the nasopharynx. Region-specific differences amongst pharyngeal VOIs, which were observed at T0, disappeared on the T1 images. The decreased DSC of nasopharyngeal segmentation after treatment was weakly correlated with the amount of maxillary advancement. There was no correlation between the mandibular setback amount and model accuracy. CONCLUSIONS: The proposed model offers fast and accurate subregional pharyngeal segmentation on both pre-treatment and post-treatment CBCT images in skeletal Class III patients. CLINICAL SIGNIFICANCE: We elucidated the clinical applicability of the CNNs model to quantitatively evaluate subregional pharyngeal changes after surgical-orthodontic treatment, which offers a basis for developing a fully integrated multiclass CNNs model to predict pharyngeal responses after dentoskeletal treatments.
Assuntos
Má Oclusão Classe III de Angle , Cirurgia Ortognática , Humanos , Adolescente , Adulto Jovem , Adulto , Inteligência Artificial , Má Oclusão Classe III de Angle/diagnóstico por imagem , Má Oclusão Classe III de Angle/cirurgia , Faringe/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodos , Redes Neurais de ComputaçãoRESUMO
This study examines the impacts of copper and boron in parts per million (ppm) on the microstructure and mechanical properties of spheroidal graphite cast iron (SCI). Boron's inclusion increases the ferrite content whereas copper augments the stability of pearlite. The interaction between the two significantly influences the ferrite content. Differential scanning calorimetry (DSC) analysis indicates that boron alters the enthalpy change of the α + Fe3C â γ conversion and the α â γ conversion. Scanning electron microscope (SEM) analysis confirms the locations of copper and boron. Mechanical property assessments using a universal testing machine show that the inclusion of boron and copper decreases the tensile strength and yield strength of SCI, but simultaneously enhances elongation. Additionally, in SCI production, the utilization of copper-bearing scrap and trace amounts of boron-containing scrap metal, especially in the casting of ferritic nodular cast iron, offers potential for resource recycling. This highlights the importance of resource conservation and recycling in advancing sustainable manufacturing practices. These findings provide critical insights into the effects of boron and copper on SCI's behavior, contributing to the design and development of high-performance SCI materials.
RESUMO
To evaluate the dynamic characteristics at all positions of the main spindle of a machine tool, an experimental point was selected using a full factorial design, and a vibration test was conducted. Based on the measurement position, the resonant frequency was distributed from approximately 236 to 242 Hz. The approximation model was evaluated based on its resonant frequencies and dynamic stiffness using regression and interpolation methods. The accuracy of the resonant frequency demonstrated by the kriging method was approximately 89%, whereas the highest accuracy of the dynamic stiffness demonstrated by the polynomial regression method was 81%. To further verify the approximation model, its dynamic characteristics were measured and verified at additional experimental points. The maximum errors yielded by the model, in terms of the resonant frequency and dynamic stiffness, were 1.6% and 7.1%, respectively.
RESUMO
PURPOSE: To compare bioabsorbable plates with metal miniplate systems for use in endoscope-assisted open reduction and internal fixation (EAORIF) of mandibular subcondylar fractures. MATERIALS AND METHODS: This retrospective cohort study included patients with mandibular subcondylar fractures treated with EAORIF using bioabsorbable unsintered hydroxyapatite/poly l-lactide composite plates or titanium miniplate systems. The outcome variables included preoperative fracture conditions, postoperative stability during fracture healing, and complications during the follow-up period. Other variables included clinical characteristics (age, sex, fracture site, and total follow-up duration) and intra- and postoperative data (surgical duration, duration of intermaxillary fixation/elastic band guidance). Variables were evaluated using descriptive statistics and compared between groups using the Mann-Whitney test and the chi-square test or Fisher's exact test, as appropriate. RESULTS: In total, 28 patients were analyzed, including 13 who underwent EAORIF using bioabsorbable plates and 15 who underwent EAORIF using titanium miniplates. With the exception of second surgery for plate removal, none of the assessed variables showed significant differences between the two groups (p < 0.05). CONCLUSIONS: Our results suggest that EAORIF using biodegradable plates is a stable and reliable method for the management of mandibular subcondylar fractures and eliminates the need for secondary surgery for plate removal.