TD-DFT and Experimental Methods for Unraveling the Energy Distribution of Charge-Transfer Triplet/Singlet States of a TADF Molecule in a Frozen Matrix.

Reverse intersystem crossing (RISC) rate of a thermally activated delayed fluorescence (TADF) molecule is sensitive to the energy alignment of the singlet charge-transfer state (1CT), triplet charge-transfer state (3CT), and locally excited triplet state (3LE). However, the energy distribution of the charge-transfer states originating from the conformational distribution of TADF molecules in a solid matrix inevitably generated during the preparation of a solid sample due to the rotatable donor-acceptor linkage is rarely considered. Moreover, the investigation of the energy distribution of the 3CT state is both theoretically and experimentally difficult due to the triplet instabilities of time-dependent density functional (TD-DFT) calculations and difficulties in phosphorescence measurements, respectively. As a result, the relationships between conformational distribution, configurations of excited state transition orbitals, and excited state energies/dynamics have not been clearly explained. In this work, we determined the energy distribution of CT states of the TADF emitter TPSA in frozen toluene at 77 K by the measurement of time-resolved spectra in the full time range (1 ns to 30 s) of emission including prompt fluorescence, TADF, 3CT phosphorescence, and 3LE phosphorescence. We obtained the energy band of CT states where 1CT and 3CT states are distributed in the range of 2.85-3.00 and 2.64-2.96 eV, respectively. We tested various global hybrid and long-range corrected functionals for the TD-DFT calculation of 3CT energy of TPSA and found that only the M11 functional shows consistent results without triplet instability. We performed TD-DFT with the M11* functional optimized for a robust dihedral angle scan of 3CT states without triplet instability and reproduced the energy band structure obtained from the experiment. Through TD-DFT and experimental investigations, it is estimated that the dihedral angles of donor-acceptor (θD-A) and acceptor-linker (θA) of TPSA in frozen toluene lie within the range 70° ≤ θD-A ≤ 90° and 0° ≤ θA ≤ 30° respectively. Our results show that the dihedral angle distribution must be considered for further investigation of the photophysics of TADF molecules and the development of stable and efficient TADF emitters.

A Broadband Multiplex Living Solar Cell.

Developing renewable and sustainable energy sources is a compelling goal in materials science and engineering. In particular, natural photosynthesis with its infinite energy reservoir provides profound inspiration for energy conversion and storage systems. Here, we report a multiplex living solar cell that offers a drastic power enhancement by harnessing the broadband spectra of the visible wavelength range for photosynthesis. Cyanobacteria are embedded into a nanostructural complex composed of Au nanoparticles (NPs) and ZnO nanorods (NRs). This nanocomposite system is capable of not only generating excitons but also amplifying the photosynthetic performance of the cell via a far-field scattering effect in the broadband region of the light, resulting in multiplex energy harvesting with a peak power density of 6.15 mW/m2. We envision that this study will provide a strategic way to enhance the performance of biophotovoltaics, enabling efficient and durable energy generation.

Simple method to extract extinction coefficients of films with the resolution of 10-5 using just transmission data and application to intermolecular charge-transfer absorption in an exciplex-forming organic film.

A simple method is presented to determine the thickness, refractive index and extinction coefficient of a film with the resolutions of ±1 nm, ±2 × 10-3, and 6 × 10-5, respectively. The method requires only ultraviolet-visible-near-infrared spectroscopy measurement of the transmittance of films with thicknesses of a few micrometers. A very small extinction coefficient of intermolecular charge transfer (CT) absorption of an exciplex-forming organic film is measured in the sub-bandgap wavelength region. This is to demonstrate that the CT absorption with extinction coefficient in the range of 10-3 to 10-5 can be measured indeed using the method, which is in the same resolution as photothermal deflection spectroscopy and Fourier transform photocurrent spectroscopy. The simplicity and feasibility of the proposed approach is expected to promote active study of intermolecular CT absorption in exciplex-forming films.

Direct formation of nano-pillar arrays by phase separation of polymer blend for the enhanced out-coupling of organic light emitting diodes with low pixel blurring.

We have demonstrated a simple and efficient method to fabricate OLEDs with enhanced out-coupling efficiencies and with low pixel blurring by inserting nano-pillar arrays prepared through the lateral phase separation of two immiscible polymers in a blend film. By selecting a proper solvent for the polymer and controlling the composition of the polymer blend, the nano-pillar arrays were formed directly after spin-coating of the polymer blend and selective removal of one phase, needing no complicated processes such as nano-imprint lithography. Pattern size and distribution were easily controlled by changing the composition and thickness of the polymer blend film. Phosphorescent OLEDs using the internal light extraction layer containing the nano-pillar arrays showed a 30% enhancement of the power efficiency, no spectral variation with the viewing angle, and only a small increment in pixel blurring. With these advantages, this newly developed method can be adopted for the commercial fabrication process of OLEDs for lighting and display applications.

Luminescence from oriented emitting dipoles in a birefringent medium.

We present an optical model to describe the luminescence from oriented emitting dipoles in a birefringent medium and validate the theoretical model through its applications to a dye doped organic thin film and organic light emitting diodes (OLEDs). We demonstrate that the optical birefringence affects not only far-field radiation characteristics such as the angle-dependent emission spectrum and intensity from the thin film and OLEDs, but also the outcoupling efficiency of OLEDs. The orientation of emitting dipoles in a birefringent medium is successfully analyzed from the far-field radiation pattern of a thin film using the model. In addition, the birefringent model presented here provides a precise analysis of the angle-dependent EL spectra and efficiencies of OLEDs with the determined emitting dipole orientation.

Enhanced light extraction efficiency in organic light-emitting diode with randomly dispersed nanopattern.

An optical scattering layer composed of randomly dispersed nanopatterns (RDNPs) was introduced in an organic light-emitting diode (OLED) to increase the out-coupling efficiency. An RDNP was fabricated by direct printing on a glass substrate. Owing to its low haze and high transmittance, the RDNP acted as a light extraction layer in the OLED. The RDNP OLEDs showed higher current density and luminance than the reference devices at the same voltage. The current and power efficiencies of the RDNP OLED increased by 25% and 34%, respectively, without electrical degradation. Furthermore, the RDNP devices achieved an external quantum efficiency of 27.5% at 1 mA/cm².

Charge transport in electrically doped amorphous organic semiconductors.

This article reviews recent progress on charge generation by doping and its influence on the carrier mobility in organic semiconductors (OSs). The doping induced charge generation efficiency is generally low in OSs which was explained by the integer charge transfer model and the hybrid charge transfer model. The ionized dopants formed by charge transfer between hosts and dopants can act as Coulomb traps for mobile charges, and the presence of Coulomb traps in OSs broadens the density of states (DOS) in doped organic films. The Coulomb traps strongly reduce the carrier hopping rate and thereby change the carrier mobility, which was confirmed by experiments in recent years. In order to fully understand the doping mechanism in OSs, further quantitative and systematic analyses of charge transport characteristics must be accomplished.

Enhanced light extraction efficiency in organic light emitting diodes using a tetragonal photonic crystal with hydrogen silsesquioxane.

We report an organic light emitting diode (OLED) with a hydrogen silsesquioxane as a scattering material, for enhancing light extraction efficiency. A tetragonal photonic crystal was used as pattern type, and fabricated using a direct printing technique. Planarization was accomplished using TiO2 solgel solution, having a refractive index identical to that of the indium zinc oxide transparent electrode. The current efficiency and power efficiency of the OLED increased by 17.3% and 43.4% at 10 mA/cm², respectively, without electric degradation.

Deep-blue phosphorescence from perfluoro carbonyl-substituted iridium complexes.

The new deep-blue iridium(III) complexes, (TF)2Ir(pic), (TF)2Ir(fptz), (HF)2Ir(pic), and (HF)2Ir(fptz), consisting of 2',4″-difluororphenyl-3-methylpyridine with trifluoromethyl carbonyl or heptafluoropropyl carbonyl at the 3' position as the main ligand and a picolinate or a trifluoromethylated-triazole as the ancillary ligand, were synthesized and characterized for applications in organic light-emitting diodes (OLEDs). Density function theory (DFT) calculations showed that these iridium complexes had a wide band gap, owing to the introduction of the strong electron withdrawing perfluoro carbonyl group. Time-dependent DFT (TD-DFT) calculations suggested that their lowest triplet excited state was dominated by a HOMO → LUMO transition and that the contribution of the metal-to-ligand charge transfer (MLCT) was higher than 34% for all four complexes, indicating that strong spin-orbit coupling exists in the complexes. The 10 wt % (TF)2Ir(pic) doped 9-(3-(9H-carbazole-9-yl)phenyl)-3-(dibromophenylphosphoryl)-9H-carbazole (mCPPO1) film exhibited the highest photoluminescence quantum yield of 74 ± 3% among the films based on the four complexes. Phosphorescent OLEDs based on (TF)2Ir(pic) and (TF)2Ir(fptz) exhibited maximum external quantum efficiencies of 17.1% and 8.4% and Commission Internationale de l'Eclairage (CIE) coordinates of (0.141, 0.158) and (0.147, 0.116), respectively. These CIE coordinates represent some of the deepest blue emissions ever achieved from phosphorescent OLEDs with considerably high EQEs.

Enhanced light out-coupling of OLEDs with low haze by inserting randomly dispersed nanopillar arrays formed by lateral phase separation of polymer blends.

A simple and efficient method to fabricate light extraction layers is demonstrated by utilizing the phase separation of two polymer blends to enhance the light out-coupling efficiency of OLEDs with low haze. Polystyrene and poly(methyl methacrylate) dissolved in tetrahydrofuran are mixed and spin-coated over ITO-coated glass substrates. Nanopores and nanopillar arrays are formed through lateral phase separation of the polymer blend. The shape, size, and distribution of the patterns can be controlled through changes in the composition and thickness of the coated polymer blends. Phosphorescent OLEDs are fabricated using randomly dispersed nanopillar arrays as light extraction layers and they show a 24% enhancement in external quantum efficiency with a Lambertian emission pattern, no spectrum dependence on viewing angles, and only a small increment in the haze. With these advantages, this newly developed method can be adapted to be used for large-area, flexible substrates for lighting and display applications.

Breaking the Efficiency Limit of Deep-Blue Fluorescent OLEDs Based on Anthracene Derivatives.

Triplet harvesting is important for the realization of high-efficiency fluorescent organic light-emitting diodes (OLEDs). Triplet-triplet annihilation (TTA) is one triplet-harvesting strategy. However, for blue-emitting anthracene derivatives, the theoretical maximum radiative singlet-exciton ratio generated from the TTA process is known to be 15% in addition to the initially generated singlets of 25%, which is insufficient for high-efficiency fluorescent devices. In this study, nearly 25% of the radiative singlet-exciton ratio is realized by TTA using an anthracene derivative, breaking the theoretical limit. As a result, efficient deep-blue TTA fluorescent devices are developed, exhibiting external quantum efficiencies of 10.2% and 8.6% with Commission Internationale de l'Eclairage color coordinates of (0.134, 0.131) and (0.137, 0.076), respectively. The theoretical model provided herein explains the experimental results considering both the TTA and reverse intersystem crossing to a singlet state from higher triplet states formed by the TTA, clearly demonstrating that the radiative singlet ratio generated from TTA can reach 37.5% (total radiative singlet-exciton ratio: 62.5%), well above 15% (total 40%), despite the molecule having S1 , T2  < 2T1  < Q1 energy levels, which will lead to the development of high-efficiency fluorescent OLEDs with external quantum efficiencies exceeding 28% if the outcoupling efficiency is 45%.

Crystal Facet Engineering of TiO2 Nanostructures for Enhancing Photoelectrochemical Water Splitting with BiVO4 Nanodots.

Although bismuth vanadate (BiVO4) has been promising as photoanode material for photoelectrochemical water splitting, its charge recombination issue by short charge diffusion length has led to various studies about heterostructure photoanodes. As a hole blocking layer of BiVO4, titanium dioxide (TiO2) has been considered unsuitable because of its relatively positive valence band edge and low electrical conductivity. Herein, a crystal facet engineering of TiO2 nanostructures is proposed to control band structures for the hole blocking layer of BiVO4 nanodots. We design two types of TiO2 nanostructures, which are nanorods (NRs) and nanoflowers (NFs) with different (001) and (110) crystal facets, respectively, and fabricate BiVO4/TiO2 heterostructure photoanodes. The BiVO4/TiO2 NFs showed 4.8 times higher photocurrent density than the BiVO4/TiO2 NRs. Transient decay time analysis and time-resolved photoluminescence reveal the enhancement is attributed to the reduced charge recombination, which is originated from the formation of type II band alignment between BiVO4 nanodots and TiO2 NFs. This work provides not only new insights into the interplay between crystal facets and band structures but also important steps for the design of highly efficient photoelectrodes.

In situ antibody detection and charge discrimination using aqueous stable pentacene transistor biosensors.

Pentacene-based organic thin-film transistors were used to create highly sensitive, real-time electronic sensors for selective antibody detection. Bovine serum albumin was covalently attached to a modified pentacene surface to selectively detect the label free monoclonal antiBSA. These sensors displayed a high affinity constant (K(A)) of (1.1 ± 3) × 10(7) M(-1) at pH 7, which is 1 order of magnitude higher than those obtained with a highly sensitive surface plasmon resonance spectroscopy detection system. Furthermore, a high degree of discrimination in the hybrid antiBSA charges was achieved at different pH values. This demonstration of fast, label-free, real-time detection of nanoscale biomolecules in aqueous buffer solutions using the organic transistor sensing platform will have a significant impact on high-performance microarrays in addition to discriminating the presence of ionizable groups.

Hole injection/transport materials derived from Heck and sol-gel chemistry for application in solution-processed organic electronic devices.

An organosilicate polymer, based on N,N'-diphenyl-N,N'-bis(4-((E)-2-(triethoxysilyl)vinyl)phenyl)biphenyl-4,4'-diamine (TEVS-TPD) with extended conjugation between the Si atom and the aromatic amine, was prepared under mild conditions via sequential Heck and sol-gel chemistry and used as an alternative to poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), the most widely used planarizing hole injection/transport layer in solution-processed organic electronic devices. Spin-coating TEVS-TPD polymer solutions yield defect-free, uniform, thin films with excellent adhesion to the ITO electrode. Upon thermal cross-linking at 180 °C, the cross-linked polymer exhibits excellent solvent resistance and electrochemical stability. Solution-processed organic light emitting diode (OLED) devices using iridium-based triplet emitting layers and cross-linked TEVS-TPD films as a hole injection/transport layer show significantly improved performance including lower leakage current, lower turn-on voltage, higher luminance, and stability at high current density, as compared to the control device prepared with PEDOT:PSS.

Estimation of the mean emission zone in phosphorescent organic light-emitting diodes with a thin emitting layer.

We presented an approach to estimate the emission zone (EZ) positions in high efficiency phosphorescent OLEDs with a thin emitting layer. Two devices with different distances between the emitting layer and the cathode (i.e. they are optically different), but exhibiting same current density-voltage characteristics (i.e. they are electrically the same) were used for this purpose. Mean EZ positions in the OLEDs were extracted from the comparison of the experimental luminous intensity ratio vs. the current density with the calculated intensity ratio vs. the EZ position. The validity of the approach was confirmed by the agreement between calculated and experimental spectral changes.

Solution-processed photonic crystals to enhance the light outcoupling efficiency of organic light-emitting diodes.

We report an effective solution process to fabricate planarized photonic crystal substrates to enhance the outcoupling efficiency of organic light-emitting diodes (OLEDs). The photonic crystal structure was fabricated using nanoimprint lithography using a UV-curable acrylate and was planarized by using a ZnO layer formed by the solgel process. The solgel process resulted in a smooth surface, and OLEDs have been successfully integrated on the planarized photonic crystal layer with a low leakage current. The resulting light outcoupling efficiency was enhanced by 38% compared with that of conventional OLEDs, which is well matched with a theoretical prediction.

Growth mechanism of CH3NH3I in a vacuum processed perovskite.

In the field of halide perovskite research, the growth of high quality films has been a critical issue. Among the reported growth methods, vacuum processes have attracted much attention due to their accurate controllability and high reproducibility, as proven in the manufacture of vacuum deposited organic-light-emitting-diode industry. In a vacuum process, the major difficulty for growing a perovskite film is control of a precursor, methylammonium iodide (MAI), originating from its uncontrollable behavior i.e., a high working pressure and poor adsorption characteristics. Thus, it is crucial to understand the growth mechanism of MAI vapor for the successful application of vacuum processes in the growth of halide perovskite films. In this paper, we report the growth mechanism and deposition kinetics of MAI in a vacuum. Unlike that of conventional materials evaporated in a vacuum, the deposition rate of MAI was found to be much faster on the reactive surface, PbI2, compared to other non-reactive materials. Surprisingly, a very thin (2 nm-thick) PbI2 layer increased the initial growth rate of MAI 2.7-fold. Based on the real-time monitored data from a quartz microbalance and surface study, we suggest dipole-induced adsorption as the MAI growth mechanism on PbI2 and the perovskite in the vacuum process. We believe that this work will provide meaningful insight into film growth in vacuum processed perovskites.

Highly Efficient Deep-Blue OLEDs using a TADF Emitter with a Narrow Emission Spectrum and High Horizontal Emitting Dipole Ratio.

New blue (DBA-SAB) and deep-blue (TDBA-SAF) thermally activated delayed fluorescence (TADF) emitters are synthesized for blue-emitting organic-light emitting diodes (OLEDs) by incorporating spiro-biacridine and spiro-acridine fluorene donor units with an oxygen-bridged boron acceptor unit, respectively. The molecules show blue and deep-blue emission because of the deep highest occupied molecular energy levels of the donor units. Besides, both emitters exhibit narrow emission spectra with the full-width at half maximum (FWHM) of less than 65 nm due to the rigid donor and acceptor units. In addition, the long molecular structure along the transition dipole moment direction results in a high horizontal emitting dipole ratio over 80%. By combining the effects, the OLED utilizing DBA-SAB as the emitter exhibits a maximum external quantum efficiency (EQE) of 25.7% and 1931 Commission Internationale de l'éclairage (CIE) coordinates of (0.144, 0.212). Even a higher efficiency deep blue TADF OLED with a maximum EQE of 28.2% and CIE coordinates of (0.142, 0.090) is realized using TDBA-SAF as the emitter.

Design Strategy of Anthracene-Based Fluorophores toward High-Efficiency Deep Blue Organic Light-Emitting Diodes Utilizing Triplet-Triplet Fusion.

In contrast to the red and green regions, conventional fluorescent emitters continue to serve as blue emitters in commercialized organic light-emitting diodes. Many researchers have studied anthracene moieties as blue emitters, given their appropriate energy levels and good emission properties. We herein report two new deep blue-emitting anthracene derivatives that include p-xylene as moieties connecting the anthracene cores to side groups. We enhanced the efficiency by maximizing triplet-triplet fusion (TTF) without sacrificing emission color. The large steric hindrance imposed by the methyl groups of p-xylene creates a perpendicular geometry between p-xylene and the neighboring aromatic rings. Any extension of π-conjugation is thus disrupted, and the isolated core anthracene moiety emits a deep blue color with a high photoluminescence quantum yield. Moreover, the extensive steric hindrance suppresses vibration and rotation because the molecules are rigid. The high horizontal dipole ratio attributable to the large aspect ratio increases the outcoupling efficiency of the emitted light. Furthermore, the charge mobility and triplet harvesting ability are enhanced by decreasing the bulkiness of the side groups. Molecular dynamics simulation revealed that the bulkiness of the side group significantly impacted molecular density, which in turn affected the charge transport and TTF. We used two molecules, 2PPIAn (containing a phenyl side group) and 4PPIAn (containing a terphenyl side group), to form nondoped emission layers that exhibited maximum external quantum efficiencies of 8.9 and 7.1% with Commission Internationale de L'Eclairage coordinates of (0.150, 0.060) and (0.152, 0.085), respectively.

External Quantum Efficiency Exceeding 24% with CIEy Value of 0.08 using a Novel Carbene-Based Iridium Complex in Deep-Blue Phosphorescent Organic Light-Emitting Diodes.

Deep-blue triplet emitters remain far inferior to standard red and green triplet emitters in terms of exhibiting high-color-purity Commission International de l'Éclairage (CIE) y values of ≤0.1, external quantum efficiencies (EQEs), and high electroluminescent brightnesses in phosphorescent organic light-emitting diodes. In fact, no deep-blue triplet emitter with color purity and high device performance has previously been reported. In this study, a deep-blue triplet emitter, mer-tris(N-phenyl, N-benzyl-pyridoimidazol-2-yl)iridium(III) (mer-Ir1) is developed, which meets the requirements of the National Television System Committee (NTSC) CIE(x, y) coordinates of (0.149, 0.085) with an extremely high EQE of 24.8% and maximum brightness (Lmax ) of 6453 cd m-2 , by a device with a 40 vol% doping ratio. Moreover, another device demonstrates an EQEmax of 21.3%, an Lmax of 5247 cd m-2 , and CIE(x, y) coordinates of (0.151, 0.086) at a 30 vol% doping ratio. This is the first report of a high-performance, deep-blue phosphor, carbene-based Ir(III) complex device with outstanding CIE(x, y) color coordinates and a high EQE. The results of this study indicate that the novel dopant mer-Ir1 is a promising candidate for reducing power consumption in display applications.