Comparative Phylogenetic Analysis of Ancient Korean Tea "Hadong Cheon-Nyeon Cha (Camellia sinensis var. sinensis)" Using Complete Chloroplast Genome Sequences.

Wild teas are valuable genetic resources for studying evolution and breeding. Here, we report the complete chloroplast genome of the ancient Korean tea 'Hadong Cheon-nyeon Cha' (C. sinensis var. sinensis), which is known as the oldest tea tree in Korea. This study determined seven Camellia sinensis var. sinenesis, including Hadong Cheon-nyeon Cha (HCNC) chloroplast genome sequences, using Illumina sequencing technology via de novo assembly. The chloroplast genome sizes ranged from 157,019 to 157,114 bp and were organized into quadripartite regions with the typical chloroplast genomes. Further, differences in SNPs and InDels were detected across the seven chloroplast genomes through variance analysis. Principal component and phylogenetic analysis suggested that regional constraints, rather than functional constraints, strongly affected the sequence evolution of the cp genomes in this study. These genomic resources provide evolutionary insight into Korean tea plant cultivars and lay the foundation for a better understanding of the ancient Korean tea plant HCNC.

Digital technology revolutionizing mandibular fracture treatment: a comparative analysis of patient-specific plates and conventional titanium plates.

OBJECTIVES: The treatment of fractures prioritizes the restoration of functionality through the realignment of fractured segments. Conventional methods, such as titanium plates, have been employed for this purpose; however, certain limitations have been observed, leading to the development of patient-specific plates. Furthermore, recent advancements in digital technology in dentistry enable the creation of virtual models and simulations of surgical procedures. The aim was to assess the clinical effectiveness of patient-specific plates utilizing digital technology in treating mandibular fractures compared to conventional titanium plates. MATERIALS AND METHODS: Twenty patients diagnosed with mandibular fractures were included and randomly assigned to either the study or control groups. The surgical procedure comprised reduction and internal fixation utilizing patient-specific plates generated through virtual surgery planning with digital models for the study group, while the control group underwent the same procedure with conventional titanium plates. Assessment criteria included the presence of malunion, infection, sensory disturbance, subjective occlusal disturbance and occlusal force in functional maximum intercuspation (MICP). Statistical analysis involved using the Chi-square test and one-way repeated measures analysis of variance. RESULTS: All parameters showed no statistically significant differences between the study and control groups, except for the enhancement in occlusal force in functional MICP, where a statistically significant difference was observed (p = 0.000). CONCLUSION: Using patient-specific plates using digital technology has demonstrated clinical effectiveness in treating mandibular fractures, offering advantages of time efficiency and benefits for less experienced surgeons. CLINICAL RELEVANCE: Patient-specific plates combined with digital technology can be clinically effective in mandibular fracture treatment.

Digital application of three-dimensional diagnosis and treatment with a virtual articulator.

OBJECTIVE: The purpose of this article was to introduce a method for the digital application of three-dimensional (3D) diagnosis and treatment with a virtual articulator and 3D data. CLINICAL CONSIDERATION: With the use of cone-beam computed tomography (CBCT) and intraoral and facial scans, we can create a virtual articulator and evaluate the mandibular position in maximum intercuspation and centric-related occlusion for the patient with an unstable occlusion and temporomandibular disorders (TMD). Based on this, we treated a case using a digital mandibular position indicator (MPI) and fabricated a stabilization splint using a 3D printer. This approach eliminates the traditional impression or model mounting process and the analog face bow transfer. Furthermore, the design of the stabilization splint is accomplished using software. CONCLUSIONS: The approach outlined in this article offers the potential for a digital diagnosis and treatment process by seamlessly integrating CBCT, intraoral scans, and facial scans with a high degree of accuracy. This may enhance precision in diagnosis and treatment planning, especially for patients with complicated TMD, in addition to facilitating effective communication with orthodontic patients who require thorough attention. CLINICAL SIGNIFICANCE: Utilizing a virtual articulator and digital MPI for the occlusal evaluation of patients with TMD and unstable occlusion makes it possible to diagnose and analyze the occlusal condition accurately. This approach also allows for precision and efficiency in treatment.

Detection of viral genes in Metarhizium anisopliae JEF-290-infected longhorned tick, Haemaphysalis longicornis using transcriptome analysis.

Ticks are carriers of viruses that can cause disease in humans and animals. The longhorned ticks (Haemaphysalis longicornis; LHT), for example, mediates the severe fever with thrombocytopenia syndrome virus (SFTSV) in humans, and the population of ticks is growing due to increases in temperature caused by climate change. As ticks carry primarily RNA viruses, there is a need to study the possibility of detecting new viruses through tick virome analysis. In this study, viruses in LHTs collected in Korea were investigated and virus titers in ticks exposed to the entomopathogenic fungus Metarhizium anisopliae JEF-290 were analyzed. Total RNA was extracted from the collected ticks, and short reads were obtained from Illumina sequencing. A total of 50,024 contigs with coding capacity were obtained after de novo assembly of the reads in the metaSPAdes genome assembler. A series of BLAST-based analyses using the GenBank database was performed to screen viral contigs, and three putative virus species were identified from the tick meta-transcriptome, such as Alongshan virus (ALSV), Denso virus and Taggert virus. Measurements of virus-expression levels of infected and non-infected LHTs failed to detect substantial differences in expression levels. However, we suggest that LHT can spread not only SFTSV, but also various other disease-causing viruses over large areas of the world. From the phylogenetic analysis of ALSV glycoproteins, genetic differences in the ALSV could be due to host differences as well as regional differences. Viral metagenome analysis can be used as a tool to manage future outbreaks of disease caused by ticks by detecting unknown viruses.

Creation of Digital Virtual Patient by Integrating CBCT, Intraoral Scan, 3D Facial Scan: An Approach to Methodology for Integration Accuracy.

ABSTRACT: The purpose of this paper was to introduce a method for creating a digital virtual patient by combining cone-beam computed tomography (CBCT), intraoral scan, and facial scan with a high accuracy of integration. CBCT scan, facial scan, and intraoral scan were obtained from initial visit. The virtual patient was created using the integration of these imaging modalities. Once the virtual patient was generated, digital workflow could be applied to initial patient consultation, diagnosis, treatment planning, virtual tooth setup, virtual treatment simulation, and post-treatment evaluation. integration of digital technology allows clinicians to improve diagnosis and treatment outcome. in addition, it allows for favorable patient communication. This technique eliminates the traditional impression process and complicated laboratory procedures for evaluating patient's occlusion during smile and habitual resting position. Based on this protocol, it is possible to create a digital virtual patient using CBCT, intraoral scan, and facial scan with a high accuracy of integration. it would be helpful for precision diagnosis and accurate treatment as well as favorable communication with patient.

Gene-disruption of the entomopathogenic fungus Beauveria bassiana incubated with dsRNA.

The species of Beauveria bassiana is widely used for the management of agricultural insect pests. In this study, we integrated egfp-double-stranded RNA (dsRNA) to a previously generated egfp-expressing B. bassiana transformant (Bb-egfp#3) using a protoplast integration method. The Bb-egfp#3 protoplast was mixed with the dsRNA under PEG/CaCl2 conditions and liquid-cultured in Sabouraud dextrose broth for 5 days. A control culture followed the same procedure without dsRNA. Bb-egfp#3/egfp-dsRNA cultures showed very low fungal growth (OD630 = 0.2) compared to the control culture, Bb-egfp#3 only (OD630 = 1.1). Screening of possible transformants on Sabouraud dextrose agar revealed a transformant T3, without egfp signal. T3 was confirmed as B. bassiana through sequencing of conserved genes and insect bioassays. Interestingly, the genomic egfp fragment of T3 was disrupted, and the egfp signal was not detected over four subcultures, which was also confirmed by RNA-seq of Bb-egfp#3 and T3. This study provides an interesting observation that protoplast integration with dsRNA could possibly generate significantly reduced gene expression in B. bassiana and it is stable across several generations.

A digital approach to the evaluation of mandibular position by using a virtual articulator.

The purpose of this technique report was to describe a fully digital technique to evaluate the mandibular position both in centric relation occlusion (CRO) and maximal intercuspation position (MIP). The procedure transfers data relative to the position of the maxillary and mandibular dentition to a virtual articulator based on a single cone beam computed tomography (CBCT) image. A CBCT scan of the patient was obtained in CRO, and the maxillary and mandibular casts were scanned both in CRO and MIP with an intraoral scanner. The model CRO scan data were registered on the dental part of the CBCT image by using a virtual articulator program, and a virtual facebow transfer process and mounting was performed. The virtual articulator was positioned in the right and left condyle medial pole and right orbitale. The mandibular position was evaluated in CRO and MIP by superimposing the data of the mandible position in both CRO and MIP. A quantitative 3D measurement was obtained by using the grid function. Based on this protocol, it is possible to use a fully digital approach to transfer the position of a patient's maxillary dentition to a virtual articulator based on the data from a single CBCT scan and intraoral scans. This technique eliminates the traditional facebow transfer and mounting process and complicated laboratory procedures for evaluating mandibular positional changes in CRO and MIP.

Beauveria bassiana ERL836 and JEF-007 with similar virulence show different gene expression when interacting with cuticles of western flower thrips, Frankniella occidentalis.

BACKGROUND: Insect-killing fungal species, Beauveria bassiana, is as an environment-friendly pest management tool, and many isolates are on the track of industrialization. However, some of B. bassiana isolates show similar morphology and virulence against insect pests, and so it is hard to differentiate them. Herein we used two patented isolates, ERL836 and JEF-007, and investigated their virulence against western flower thrips, Frankliniella occidentalis, and further analyzed genome structures and transcriptional responses when interacting with cuticles of thrips to see possible differences on the initial step of fungal infection. RESULTS: The two isolates showed no significant differences in fungal growth, conidial production, and virulence against thrips, and they were structurally similar in genome. But, in transcription level, ERL836 appeared to infect thrips easily, while JEF-007 appeared to have more difficulty. In the GO analysis of ERL836 DEGs (differentially expressed genes), the number of up-regulated genes was much larger than that of down-regulated genes, when compared to JEF-007 DEGs (more genes down-regulated). Interestingly, in the enrichment analysis using shared DEGs between two infecting isolates, plasma membrane-mediated transporter activity and fatty acid degradation pathway including cytochrome P450 were more active in infecting ERL836. CONCLUSION: The two B. bassiana isolates had similar morphology and virulence as well as genome structure, but in transcription level they differently interacted with the cuticle of western flower thrips. This comparative approach using shared DEG analysis could be easily applied to characterize the difference of the two B. bassiana isolates, JEF-007 and ERL836.

Genomic sequencing of Troides aeacus nucleopolyhedrovirus (TraeNPV) from golden birdwing larvae (Troides aeacus formosanus) to reveal defective Autographa californica NPV genomic features.

BACKGROUND: The golden birdwing butterfly (Troides aeacus formosanus) is a rarely observed species in Taiwan. Recently, a typical symptom of nuclear polyhedrosis was found in reared T. aeacus larvae. From the previous Kimura-2 parameter (K-2-P) analysis based on the nucleotide sequence of three genes in this isolate, polh, lef-8 and lef-9, the underlying virus did not belong to any known nucleopolyhedrovirus (NPV) species. Therefore, this NPV was provisionally named "TraeNPV". To understand this NPV, the nucleotide sequence of the whole TraeNPV genome was determined using next-generation sequencing (NGS) technology. RESULTS: The genome of TraeNPV is 125,477 bp in length with 144 putative open reading frames (ORFs) and its GC content is 40.45%. A phylogenetic analysis based on the 37 baculoviral core genes suggested that TraeNPV is a Group I NPV that is closely related to Autographa californica nucleopolyhedrovirus (AcMNPV). A genome-wide analysis showed that TraeNPV has some different features in its genome compared with other NPVs. Two novel ORFs (Ta75 and Ta139), three truncated ORFs (pcna, he65 and bro) and one duplicated ORF (38.7 K) were found in the TraeNPV genome; moreover, there are fewer homologous regions (hrs) than there are in AcMNPV, which shares eight hrs within the TraeNPV genome. TraeNPV shares similar genomic features with AcMNPV, including the gene content, gene arrangement and gene/genome identity, but TraeNPV lacks 15 homologous ORFs from AcMNPV in its genome, such as ctx, host cell-specific factor 1 (hcf-1), PNK/PNL, vp15, and apsup, which are involved in the auxiliary functions of alphabaculoviruses. CONCLUSIONS: Based on these data, TraeNPV would be clarified as a new NPV species with defective AcMNPV genomic features. The precise relationship between TraeNPV and other closely related NPV species were further investigated. This report could provide comprehensive information on TraeNPV for evolutionary insights into butterfly-infected NPV.

Use of Metarhizum aniopliae s.l. to control soil-dwelling longhorned tick, Haemaphysalis longicornis.

The longhorned tick (bush tick),Haemaphysalis longicornis (Ixodida: Ixodidae), is a serious pest; it transmits the severe fever with thrombocytopenia syndrome (SFTS) virus to humans and has a wide distribution. The use of chemical control is not favored for environmental and health reasons, so more environmentally sound management methods need to be developed. Herein, we describe the use of an entomopathogenic fungal library to develop a fungus-mediated tick management system. Field-collected nymphs were assayed for their susceptibility to entomopathogenic fungi belonging to genera Beauveria, Metarhizium, Cordyceps, and Akanthomyces. Three M. anisopliae s.l. isolates, JEF-214, -279, and -290 showed high virulence in a dose-dependent manner. One Cordyceps isolate was pathogenic but virulence was much lower than the M. anisopliae isolates. Beauveria isolates were not pathogenic to the tick. Because the longhorned tick dwells on the soil surface except for blood-feeding periods, the soil surface was sprayed with conidial suspensions of the isolates after the release of longhorned ticks. The treatments resulted in 60-90% mortality after 30 days. M. anisopliae s.l. isolates were highly virulent against longhorned tick, and the application of fungus-based biopesticides on the soil surface could be an effective control strategy to reduce the tick population for long-term tick management.

Anterior Segmental Osteotomy Using Customized Spider-Plates Based on Computer-aided Surgery System.

Anterior segmental osteotomy (ASO) is considered the treatment modality of choice in patients with the bimaxillary dentoalveolar protrusion. However, this meticulous surgical technique accompanies a number of possible disadvantages. The considerable time required before, during, and after the operation, limited movement of the segment, damage of the mental nerve, loss of tooth vitality, loss of a tooth or teeth, or indeed total loss of the anterior segments are those that affect the result of the surgery. Recently, the authors have devised a computer-aided surgical simulation programme and fabricated the customized osteotomy guides and the spider-shaped plates based on the programme. They were then applied to a 28-year-old patient with the complaint of a bimaxillary dentoalveolar protrusion. This approach helped to overcome several problems related to ASO reported earlier.

Green Tea Seed Oil Suppressed Aß1⁻42-Induced Behavioral and Cognitive Deficit via the Aß-Related Akt Pathway.

The aim of this study was to investigate the availability of seeds, one of the byproducts of green tea, and evaluate the physiological activity of seed oil. The ameliorating effect of green tea seed oil (GTO) was evaluated on H2O2-induced PC12 cells and amyloid beta (Aß)1-42-induced ICR mice. GTO showed improvement of cell viability and reduced reactive oxygen species (ROS) production in H2O2-induced PC12 cells by conducting the 2',3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) and 2',7'-dichlorofluorescein diacetate (DCF-DA) analysis. Also, administration of GTO (50 and 100 mg/kg body weight) presented protective effects on behavioral and memory dysfunction by conducting Y-maze, passive avoidance, and Morris water maze tests in Aß-induced ICR mice. GTO protected the antioxidant system by reducing malondialdehyde (MDA) levels, and by increasing superoxide dismutase (SOD) and reducing glutathione (GSH) contents. It significantly regulated the cholinergic system of acetylcholine (ACh) contents, acetylcholinesterase (AChE) activities, and AChE expression. Also, mitochondrial function was improved through the reduced production of ROS and damage of mitochondrial membrane potential (MMP) by regulating the Aß-related c-Jun N-terminal kinase (JNK)/protein kinase B (Akt) and Akt/apoptosis pathways. This study suggested that GTO may have an ameliorating effect on cognitive dysfunction and neurotoxicity through various physiological activities.

The accuracy and stability of the maxillary position after orthognathic surgery using a novel computer-aided surgical simulation system.

BACKGROUND: Many reports have been published on orthognathic surgery (OGS) using computer-aided surgical simulation (CASS). The purpose of this study was to evaluate the accuracy of the maxillary repositioning and the stability of the maxilla in patients who underwent OGS using a newly developed CASS program, a customized osteotomy guide, and a customized miniplate. METHODS: Thirteen patients who underwent OGS from 2015 to 2017 were included. All patients underwent a bimaxillary operation. First, a skull-dentition hybrid 3D image was rendered by merging the cone beam computed tomography (CBCT) images with the dentition scan file. After virtual surgery (VS) using the FaceGide® program, patient-customized osteotomy guides and miniplates were then fabricated and used in the actual operation. To compare the VS with the actual surgery and postoperative skeletal changes, each reference point marked on the image was compared before the operation (T0) and three days (T1), four months (T2), and a year (T3) after the operation, and with the VS (Tv). The differences between ΔTv (Tv-T0) and ΔT1 (T1-T0) were statistically compared using tooth-based reference points. The superimposed images of Tv and T1 were also investigated at eight bone-based reference points. The differences between the reference points of the bone surface were examined to evaluate the stability of the miniplate on the maxilla over time. RESULTS: None of the patients experienced complications. There were no significant differences between the reference points based on the cusp tip between ΔTv and ΔT1 (p > 0.01). Additionally, there were no significant differences between the Tv and T1 values of the bone surface (p > 0.01). The mean difference in the bone surface between Tv and T1 was 1.01 ± 0.3 mm. Regarding the stability of the miniplate, there were no significant differences between the groups. The difference in the bone surface between T1 and T3 was - 0.37 ± 0.29 mm. CONCLUSIONS: VS was performed using the FaceGide® program, and customized materials produced based on the VS were applied in actual OGS. The maxilla was repositioned in almost the same manner as in the VSP plan, and the maxillary position remained stable for a year.

Conidiogenesis-related DNA photolyase gene in Beauveria bassiana.

Beauveria bassiana is an entomopathogenic fungi used in environmentally mindful pest management. Its main active ingredient, conidia, is commercially available as a fungal biopesticide. Many studies of conidia production have focused on how to optimize culture conditions for maximum productivity and stability against unfavorable abiotic factors. However, understanding of how conidiogenesis-related genes provide improved conidial production remains unclear. In this study, we focus on identifying conidiogenesis-related genes in B. bassiana ERL1170 using a random mutagenesis technique. Transformation of ERL1170 using restriction enzyme-mediated integration generated one morphologically different transformant, ERL1170-pABeG #163. The transformant was confirmed to represent B. bassiana, and the binary vector was successfully integrated into the genome of ERL1170. Compared to the wild type, transformant #163 showed very slow hyphal growth and within 6 days only produced <1 × 106 conidia/0.28 cm2 agar block (wild type: 6.2 × 107 conidia/agar block). Transformant #163 also exhibited different morphology than the wild type, including thicker hyphae with some club-shaped parts. In contrast, the typical morphology of wild type B. bassiana exhibits thread-like hyphae and conidiophore structures and circular conidia. To determine the location of the randomly inserted DNA, we conducted thermal asymmetric interlaced (TAIL) PCR and Escherichia coli cloning to clearly sequence the disrupted region. We identified one colony (colony No. 7) with an insertion site identified as DNA photolyase. This was confirmed through a gene knock-out study. It is possible the gene that encodes for DNA photolyase was disrupted during the insertion process and might be involved in fungal conidiogenesis. This work serves as a platform for exploring the function of a variety of B. bassiana genes involved in pest management and their downstream processing.

Contour Restoration of Over-Resected Mandibular Angle and Lower Border by Reduction Mandibuloplasty Using Three-Dimensional Planning and Computer-Aided Design and Manufacturing Custom-Made Titanium Implants.

OBJECTIVE: The purpose of this clinical report was to introduce a new methodology for contour restoration of the over-resected mandible by reduction mandibuloplasty using 3-dimensional (3D) planning and computer-assisted design and manufacturing (CAD-CAM) custom-made titanium implants. PATIENT AND METHOD: A 20-year-old male patient had undergone reduction of the zygoma and mandibular angle and lower border for esthetic reason 1 year ago at a private clinic. However, he was not satisfied with surgical outcome and wanted to restore his original facial volume and contour. To assess the volume and dimension of resected bone, 3D-computed tomography (3D-CT) data at the original stage was superimposed with postsurgical CT. For restoration of the malar prominence, porous polyethylene malar implants with extensions into the lateral malar region (Medpor) were placed and fixed with microscrews. Custom-made titanium implants were fabricated for contour restoration of the mandibular angle and lower border using CAD-CAM technology (iDDA, Daegu, South Korea). Two-piece design per each titanium implant was adopted for easy placement and avoidance of tissue damage during placement. Thin buccal extension was incorporated for placement of screw holes. Location, direction, and length of bicortical screws were planned to avoid damage of the inferior alveolar nerve. RESULT: With the help of 3D planning and CAD-CAM technology, rigid fixation of the custom-made titanium implants into the mandibular angle and lower border successfully restored the contour of over-resected mandible to the original state. CONCLUSION: When over-resection by reduction mandibuloplasty becomes an issue, this method may be an effective treatment option for contour restoration of over-resected mandibular angle and lower border.

Treatment outcomes and recurrence following standard cold forceps polypectomy for diminutive polyps.

BACKGROUND: The recurrence rate after standard cold forceps polypectomy (CFP) of diminutive polyps of ≤5 mm has not been fully determined. The aim of this study was to analyze the long-term follow-up results and recurrence rate after CFP of diminutive polyps. METHODS: We retrospectively reviewed the medical records of 884 (738 men; age 53 years) asymptomatic subjects who underwent surveillance colonoscopy after CFP of 1-2 diminutive adenomatous polyps. Cumulative recurrence at the CFP site and risk factors for recurrence were analyzed. RESULTS: Overall recurrence over 59.7 months was 17 % after CFP of 1111 diminutive polyps. The rate of definite recurrence was 4 %, and probable recurrence was 13 %. Recurrence as advanced adenoma was 0.5 % (5/1111). The cumulative probabilities of recurrence at 3, 5, and 7 years after CFP were 10.0, 16.0, and 21.1 %, respectively. Multivariate analysis revealed that polyp 4-5 mm in size and right colonic polyp were risk factors for recurrence (hazard ratio [HR] 1.37; 95 % confidence interval [CI] 1.01-1.86 and HR 1.49; 95 % CI 1.08-2.04, respectively). The recurrence rate for 10 endoscopists who performed at least 50 CFPs ranged from 11.0 to 25.2 %; the probability of recurrence in those in the top half in terms of recurrence rate was 1.6-fold higher than that of those in the bottom half (95 % CI 1.17-2.19). CONCLUSIONS: Although recurrence may develop after standard CFP of diminutive polyps, recurrence as advanced adenoma is rare. Large polyp size, right colon polyp, and endoscopist are risk factors for recurrence after standard CFP.

Heterotypic stress-induced adaptive evolution enhances freeze-drying tolerance and storage stability of Leuconostoc mesenteroides WiKim33.

Lactic acid bacteria (LAB) are currently being investigated for their potential use as probiotics and starter cultures. Researchers have developed powdering processes for the commercialization of LAB. Previous studies have focused on identifying innovative cryoprotective agents and freeze-drying (FD) techniques to enhance the stability of LAB. In this study, adaptive laboratory evolution (ALE) was employed to develop a strain with high FD tolerance and enhanced storage stability. Leuconostoc mesenteroids WiKim33 was subjected to heterotypic shock (heat and osmosis shock) to induce the desired phenotype and genotype. An FD-tolerant enhanced Leu. mesenteroides WiKim33 strain (ALE50) was obtained, which harbored a modified fatty acid composition and cell envelope characteristics. Specifically, ALE50 showed a lower unsaturated fatty acid (UFA)/saturated fatty acid (SFA) ratio and a higher cyclic fatty acid (CFA) composition. Moreover, the exopolysaccharide (EPS) thickness increased significantly by 331% compared to that of the wild type (WT). FD tolerance, which was evaluated using viability testing after FD, was enhanced by 33.4%. Overall, we demonstrated the feasibility of ALE to achieve desirable characteristics and provided insights into the mechanisms underlying increased FD tolerance.

Rapid analysis of insecticidal metabolites from the entomopathogenic fungus Beauveria bassiana 331R using UPLC-Q-Orbitrap MS.

Beauveria bassiana, a representative entomopathogenic fungus, is increasingly being utilized as an eco-friendly pest management alternative to chemical insecticides. This fungus produces a range of insecticidal secondary metabolites that act as antimicrobial and immunosuppressive agents. However, detailed qualitative and quantitative analysis related to these compounds remains scarce, we developed a method for the rapid analysis of these metabolites. Eight secondary metabolites (bassianin, bassianolide, beauvericin, beauveriolide I, enniatin A, A1, and B, and tenellin) were efficiently extracted when B. bassiana-infected Tenebrio molitor larvae were ground in 70% EtOH extraction solvent and subsequently subjected to ultrasonic treatment for 30 min. The eight metabolites were rapidly and simultaneously analyzed using ultra-performance liquid chromatography-quadrupole-Orbitrap mass spectrometry (UPLC-Q-Orbitrap MS). Bassianolide (20.6-51.1 µg/g) and beauvericin (63.6-109.8 µg/g) were identified as the main metabolites in B. basssiana-infected larvae, indicating that they are likely major toxins of B. bassiana. Validation of the method exhibited recovery rates in the range of 80-115% and precision in the range of 0.1-8.0%, indicating no significant interference from compounds in the matrix. We developed a method to rapidly analyze eight insecticidal metabolites using UPLC-Q-Orbitrap MS. This can be extensively utilized for detecting and producing insecticidal fungal secondary metabolites.

Advancements in computer-assisted orthognathic surgery: A comprehensive review and clinical application in South Korea.

OBJECTIVES: Orthognathic surgery (OS) has evolved with technological advancements, notably through the implementation of computer-assisted orthognathic surgery (CAOS). This article aims to elucidate various types of CAOS and their efficiency and accuracy, supplemented by a thorough literature review focusing on their clinical applications in South Korea. STUDY SELECTION, DATA, AND SOURCES: A comprehensive search strategy was employed, including systematic reviews, meta-analyses, randomized controlled trials, and observational studies published until December 2023 in the PubMed, MEDLINE, and Google Scholar databases. The literature search was limited to articles written in English. RESULTS: Static CAOS demonstrated high precision, reduced operative time, and high accuracy, suggesting its potential reliability in orthognathic procedures. Dynamic CAOS presented a promising avenue for exploration, showing an accuracy comparable to that of traditional methods. The critical considerations for CAOS include accuracy, time efficiency, and cost-effectiveness. Recent studies have indicated advancements in the time efficiency of static CAOS. Static CAOS requires less equipment and is more cost-effective than dynamic CAOS. CONCLUSIONS: CAOS offers clear advantages over conventional OS in terms of surgical convenience and accuracy in implementing the surgical plan. To achieve recognition as the gold standard method for maxillofacial deformity treatment, CAOS must overcome its limitations and undergo continuous verification via well-designed studies. CLINICAL SIGNIFICANCE: The introduction of CAOS, mainly static CAOS with high precision and reduced surgical time, signifies a notable advancement in OS. However, rigorous studies are warranted to validate CAOS as the gold standard for treating maxillofacial deformities.