Advances in Biocarbon and Soft Material Assembly for Enthalpy Storage: Fundamentals, Mechanisms, and Multimodal Applications.

High-value-added biomass materials like biocarbon are being actively pursued integrating them with soft materials in a broad range of advanced renewable energy technologies owing to their advantages, such as lightweight, relatively low-cost, diverse structural engineering applications, and high energy storage potential. Consequently, the hybrid integration of soft and biomass-derived materials shall store energy to mitigate intermittency issues, primarily through enthalpy storage during phase change. This paper introduces the recent advances in the development of natural biomaterial-derived carbon materials in soft material assembly and its applications in multidirectional renewable energy storage. Various emerging biocarbon materials (biochar, carbon fiber, graphene, nanoporous carbon nanosheets (2D), and carbon aerogel) with intrinsic structures and engineered designs for enhanced enthalpy storage and multimodal applications are discussed. The fundamental design approaches, working mechanisms, and feature applications, such as including thermal management and electromagnetic interference shielding, sensors, flexible electronics and transparent nanopaper, and environmental applications of biocarbon-based soft material composites are highlighted. Furthermore, the challenges and potential opportunities of biocarbon-based composites are identified, and prospects in biomaterial-based soft materials composites are presented.

Pulsed radiofrequency of lumbar dorsal root ganglion for lumbar radicular pain: A systematic review and meta-analysis.

BACKGROUND: Pulsed radiofrequency (PRF) of the lumbar dorsal root ganglion (DRG) has been widely used as a method to relieve lumbar radicular pain (LRP). However, the value of PRF application in LRP patients remains uncertain. This systematic review aimed to compare the effects of PRF of lumbar DRG and LEI in patients with LRP. METHODS: A literature search was performed using well-known databases for articles published up to May 2023. We included randomized controlled trials (RCTs) that evaluated the effects of PRF compared to LEI with or without steroids. We screened articles, extracted data, and assessed risk of bias in duplicate. The pain scores and Oswestry Disability Index (ODI) scores at 1, 3, and 6 months after procedures were obtained. A random-effects meta-analysis model was applied for outcomes. We evaluated evidence certainty for each outcome using the GRADE scoring system. This review was registered in the PROSPERO (ID: CRD42021253628). RESULTS: A total of 10 RCTs were included and data of 613 patients were retrieved. We assessed the overall quality of the evidence as very low to moderate. PRF showed no difference in pain scores at 1 (mean difference [MD] -0.80, 95% confidence interval [CI] -1.59 to 0.00, low certainty) and 6 months (MD -2.37, 95% CI -4.79 to 0.05, very low certainty), and significantly improved pain scores at 3 months (MD -1.31, 95% CI -2.29 to -0.33, low certainty). There was no significant difference in ODI score at any interval (very low to low certainty). In the subgroup who underwent a diagnostic block, did not use steroids, and PRF duration greater than 360 s, PRF significantly reduced pain scores at 3 months after procedures. CONCLUSIONS: We found low quality of the evidence supporting adjuvant PRF to the lumbar DRG has a greater analgesic effect at 3 months after procedures in patients with LRP than LEI. We identified no convincing evidence to show that this treatment improves function. High-quality evidence is lacking, and data were largely derived from short-term effects. Given these limitations, high-quality trials with data on long-term effects are needed.

Aureochromes maintain polyunsaturated fatty acid content in Nannochloropsis oceanica.

Nannochloropsis oceanica, like other stramenopile microalgae, is rich in long-chain polyunsaturated fatty acids (LC-PUFAs) such as eicosapentaenoic acid (EPA). We observed that fatty acid desaturases (FADs) involved in LC-PUFA biosynthesis were among the strongest blue light-induced genes in N. oceanica CCMP1779. Blue light was also necessary for maintaining LC-PUFA levels in CCMP1779 cells, and growth under red light led to a reduction in EPA content. Aureochromes are stramenopile-specific proteins that contain a light-oxygen-voltage (LOV)-sensing domain that associates with a flavin mononucleotide and is able to sense blue light. These proteins also contain a basic leucine zipper DNA-binding motif and can act as blue light-regulated transcription factors by associating with an E-box like motif, which we found enriched in the promoters of blue light-induced genes. We demonstrated that, in vitro, two CCMP1779 aureochromes were able to absorb blue light. Moreover, the loss or reduction of the expression of any of the three aureochrome genes led to a decrease in the blue light-specific induction of several FADs in CCMP1779. EPA content was also significantly reduced in NoAUREO2 and NoAUREO4 mutants. Taken together, our results indicate that aureochromes mediate blue light-dependent regulation of LC-PUFA content in N. oceanica CCMP1779 cells.

Proatherogenic conditions promote autoimmune T helper 17 cell responses in vivo.

Patients with systemic autoimmune diseases show increased incidence of atherosclerosis. However, the contribution of proatherogenic factors to autoimmunity remains unclear. We found that atherogenic mice (herein referred to as LDb mice) exhibited increased serum interleukin-17, which was associated with increased numbers of T helper 17 (Th17) cells in secondary lymphoid organs. The environment within LDb mice was substantially favorable for Th17 cell polarization of autoreactive T cells during homeostatic proliferation, which was considerably inhibited by antibodies directed against oxidized low-density lipoprotein (oxLDL). Moreover, the uptake of oxLDL induced dendritic-cell-mediated Th17 cell polarization by triggering IL-6 production in a process dependent on TLR4, CD36, and MyD88. Furthermore, self-reactive CD4(+) T cells that expanded in the presence of oxLDL induced more profound experimental autoimmune encephalomyelitis. These findings demonstrate that proatherogenic factors promote the polarization and inflammatory function of autoimmune Th17 cells, which could be critical for the pathogenesis of atherosclerosis and other related autoimmune diseases.

Body Map of Droplet Distributions During Oropharyngeal Suction to Protect Health Care Workers From Airborne Diseases.

PURPOSE: Health care workers (HCWs), and in particular anesthesia providers, often must perform aerosol-generating medical procedures (AGMPs). However, no studies have analyzed droplet distributions on the bodies of HCWs during AGMPs. Therefore, the purpose of this study was to assess and analyze droplet distributions on the bodies of HCWs during suction of oral cavities with and without oral airways and during extubations. DESIGN: Using a quasi-experiemental design, we assumed the HCWs perform suction and extubation on intubated patients, and we prepared an intubated mannequin mimicking a patient. This study performed the oral suction and extubation on the intubated mannequin (with or without oral airways in place) and analyzed the droplet distributions. METHODS: We prepared a mannequin intubated with an 8.0 mm endotracheal tube, assuming the situation of general anesthesia. We designed the body mapping gown, and divided it into 10 areas including the head, neck, chest, abdomen, upper arms, forearms, and hands. We classified experiments into group O when suctions were performed on the mannequin with an oral airway, and into group X when the suctions were performed on the mannequin without an oral airway. An experienced board-certified anesthesiologist performed 10 oral suctions on each mannequin, and 10 extubations. We counted the droplets on the anesthesiologist's gown according to the divided areas after each procedure. FINDINGS: The mean droplet count after suction was 6.20 ± 2.201 in group O and 13.6 ± 4.300 in group X, with a significant difference between the two groups (P < .001). The right and left hands were the most contaminated areas in group O (2.8 ± 1.033 droplets and 2.0 ± 0.943 droplets, respectively). The abdomen, right hand, left forearm, and left hand showed many droplets in group X. (1.3 ± 1.337 droplets, 3.1 ± 1.792 droplets, 3.2 ± 3.910 droplets, and 4.3 ± 2.214 droplets, respectively). The chest, abdomen, and left hand presented significantly more droplets in group X than in group O. The trunk area (chest and abdomen) was exposed to more droplets during extubations than during suctions. CONCLUSIONS: During suctions, more droplets are splattered from mannequins without oral airways than from those with oral airways. The right and left hands were the most contaminated areas in group O. Moreover, the abdomen, right hand, left forearm, and left hand presented a lot of droplets in group X. In addition, extubations contaminate wider areas (the head, neck, chest and abdomen) of an HCW than suctions.

Practical solutions with PCM for providing thermal stability of temporary house, school and hospital in disaster situations.

Globally, humanity is at risk from the coronavirus disease (COVID-19). To address the shortage of beds in quarantining those infected with COVID-19, hospitals have prepared temporary beds. However, for temporary hospital beds, it is difficult to maintain a comfortable temperature due to lack of insulation and heat storage. Phase change materials (PCMs) are used to provide temperature stability and control for temporary structure. Therefore, this study aimed to conduct experiments that analyze the effect of room temperature stabilization using a PCM. The method of macro packed PCM (MPPCM) was used to apply the PCM to buildings. The MPPCM installation location was selected and the effect of reducing the box temperature was analyzed, according to the strength of the heat source. As a result, a maximum reduction of 4.9 °C in the box temperature was achieved. Therefore, the application of MPPCM to buildings give to stabilize the box temperature. And the result showed the possibility of providing a comfortable indoor space for temporary hospital beds.

Evaluation of hygrothermal performance of wood-derived biocomposite with biochar in response to climate change.

Wood is a sustainable resource and building material. It provides an excellent response to climate change and has excellent insulation performance. However, structural defects may occur due to decay from moisture, resulting in poor dimensional stability. The rich organic substances contained in wood can lead to mold when the moisture content is consistently high, adversely affecting the health of occupants. Therefore, we attempted to compensate for the disadvantages of wood in regard to water stability while maintaining the high thermal insulation performance and carbon dioxide storage capacity, using biochar from thermally decomposed spruce under oxygen limiting conditions. A wood-derived biocomposite was prepared by mixing biochar and soft wood-based chips using the hot-press method, and the thermal conductivity, specific heat, water vapor resistance factor, moisture adsorption, and moisture desorption performances were analyzed. The thermal conductivity of WB10 with 10 wt% biochar content was 0.09301 W/mK. This is a 7.98% decrease from 0.10108 W/mK, the thermal conductivity of WB0 without biochar. The water vapor resistance factor tended to increase when the biochar ratio increased. As the proportion of biochar increased, the equilibrium moisture content in high relative humidity tended to decrease, and it was found that the moisture adsorption and desorption performances were affected by the ratio of the biochar. Therefore, wood-derived biocomposites using biochar can be used in environmentally friendly materials, with improved thermal insulation performance and water stability.

Effect of eco-friendly pervious concrete with amorphous metallic fiber on evaporative cooling performance.

Impervious pavements exist in large proportions in most cities owing to the high-impact development of the transportation infrastructure. However, this type of pavement causes environmental issues such as waterlogging, floods, and urban heat islands. Pervious concrete (PC), which is a novel pavement material characterized by a porous structure that allows water to percolate through it, is an important solution to these issues. This study investigates the evaporative cooling performance of eco-friendly PC with blast-furnace slag (BFS) as a cement replacement and amorphous metallic fiber (AMF) that helps to accelerate the evaporative cooling. The thermophysical properties, water permeability, and water absorption capability of the manufactured PC were measured. In addition, a scale model test and thermal conductivity analysis of the manufactured PC were conducted to evaluate the evaporative cooling effect. The results indicate that the physical and mechanical properties of the manufactured PC are typically similar to those of other PCs, and its water absorption rate reaches 1 mm/s. Relatively low water permeability helps the PCs to absorb more water, contributing to accumulate a large amount of water in the material for evaporative cooling. In addition, AMF contributes to increase thermal conductivity of PC, which allow the water inside the PCs to evaporate faster. The result shows that a higher thermal conductivity of the manufactured PC increases the evaporative cooling effect.

Comparison of Intracuff Pressure and Postoperative Sore Throat Following Use of Laryngeal Mask Airway Protector With or Without Nitrous Oxide Anesthesia.

PURPOSE: In general anesthesia, the laryngeal mask airway (LMA) is a frequently used effective option. The effect of nitrous oxide on intracuff pressure of the LMA and postoperative sore throat is well known; however, there are no studies related to the second-generation LMA Protector. The purpose of this study was to determine the differences in intracuff pressure and postoperative sore throat, depending on the use of nitrous oxide during general anesthesia using the LMA Protector. DESIGN: This randomized double-blind prospective study was conducted among 88 patients aged 20 to 70 years. METHODS: The cuff pressure started with a baseline of 40 cm H2O and was measured using a digital cuff pressure manometer for 30 minutes. Postoperative sore throat, dysphonia, dysphagia, and numeric rating scale scores were also recorded. FINDINGS: Over time, the intracuff pressure of the nitrous oxide group increased significantly compared with that of the air group. Furthermore, postoperative sore throat and pharyngolaryngeal complications were not significantly different between the two groups. CONCLUSIONS: Intracuff pressure of the LMA Protector increased during anesthesia using nitrous oxide. When the anesthesia time was less than 2 hours, however, there was no difference in postoperative sore throat.

Circular reutilization of coffee waste for sound absorbing panels: A perspective on material recycling.

The increase in coffee consumption has led to increased production of coffee waste. Methods to recycle coffee waste are constantly being researched. Coffee powder is a porous material that can effectively be used to absorb sound. In this study, sound-absorbing panels were developed using coffee waste combined with resin. A sound absorption characterization of the new material was performed. Then, the noise reduction potential using coffee-waste sound absorbers was investigated in cafés. A café has several noise sources, such as coffee machines, music, and the voices of people. The noise reduction effect was evaluated using the ODEON simulation software together with the improvement in both the clarity and reverberation time in a case study café. In the investigated room, the acoustic definition (D50) increased up to 0.8, while the reverberation time (RT) reduced to 0.6 s. The results of this study demonstrate that the noise generated in the café was reduced by recycling the coffee waste produced as a by-product in the same building. Finally, this study presents a new construction material manufactured through coffee waste that is in turn applied to cafés where the coffee waste itself is produced.

Optimal Cut-Off Value of the Coracohumeral Ligament Area as a Morphological Parameter to Confirm Frozen Shoulder.

BACKGROUND: Thickened coracohumeral ligament (CHL) is one of the important morphological changes of frozen shoulder (FS). Previous research reported that coracohumeral ligament thickness (CHLT) is correlated with anterior glenohumeral instability, rotator interval and eventually FS. However, thickness may change depending on the cutting angle, and measurement point. To reduce measurement mistakes, we devised a new imaging criteria, called the coracohumeral ligament area (CHLA). METHODS: CHL data were collected and analyzed from 52 patients with FS, and from 51 control subjects (no evidence of FS). Shoulder magnetic resonance imaging was performed in all subjects. We investigated the CHLT and CHLA at the maximal thickened view of the CHL using our picture archiving and communications system. The CHLA was measured as the whole area of the CHL including the most hypertrophied part of the MR images on the oblique sagittal plane. The CHLT was measured at the thickest point of the CHL. RESULTS: The average CHLA was 40.88 ± 12.53 mm² in the control group and 67.47 ± 19.88 mm² in the FS group. The mean CHLT was 2.84 ± 0.67 mm in the control group and 4.01 ± 1.11 mm in the FS group. FS patients had significantly higher CHLA (P < 0.01) and CHLT (P < 0.01) than the control group. The receiver operator characteristic analysis showed that the most suitable cut-off score of the CHLA was 50.01 mm², with 76.9% sensitivity, 76.5% specificity, and area under the curve (AUC) of 0.87. The most suitable cut-off value of the CHLT was 3.30 mm, with 71.2% sensitivity, 70.6% specificity, and AUC of 0.81. CONCLUSION: The significantly positive correlation between the CHLA, CHLT and FS was found. We also demonstrate that the CHLA has statistically equivalent power to CHLT. Thus, for diagnosis of FS, the treating physician can refer to CHLA as well as CHLT.

The role of the anterior talofibular ligament area as a morphological parameter of the chronic ankle sprain.

BACKGROUND: Repetitive microtrauma can result in a hypertrophied ATFL. Previous studies have found that the anterior talofibular ligament thickness (ATFLT) is correlated with lateral ankle sprains, ligament injuries and chronic stroke in patients, and thickened anterior talofibular ligament (ATFL) has been considered to be a major morphologic parameter of hypertrophied ATFL. However, hypertrophy is different from thickness. Thus, we devised the anterior talofibular ligament area (ATFLA) as a new morphological parameter to evaluate the hypertrophy of the whole ATFL. METHODS: ATFL samples were collected from 53 patients with sprain group and from 50 control subjects who underwent magnetic resonance imaging (MRI) of the ankle and revealed no evidence of lateral ankle injury. Axial T1-weighted MRI images were collected at the ankle level from all subjects. We measured the ATFLA and ATFLT at the anterior margin of the fibular malleolus to the talus bone on the MRI using a picture archiving and communications system. The ATFLA was measured as the whole cross-sectional ligament area of the ATFL that was most hypertrophied in the axial MR images. The ATFLT was measured as the thickest point between the lateral malleolus and the talus of the ankle. RESULTS: The average ATFLA was 25.0 ± 6.0 mm2 in the control group and 47.1 ± 10.4 mm2 in the sprain group. The average ATFLT was 2.3 ± 0.6 mm in the control group and 3.8 ± 0.6 mm in the hypertrophied group. Patients in sprain group had significantly greater ATFLA (p < 0.001) and ATFLT (p < 0.001) than the control subjects. A Receiver Operator Characteristics curve analysis showed that the best cut-off point of the ATFLA was 34.8 mm2, with 94.3% sensitivity, 94.0% specificity, and an AUC of 0.97 (95% CI, 0.94-1.00). The optimal cut-off point of the ATFLT was 3.1 mm, with 86.8% sensitivity, 86.0% specificity, and AUC of 0.95 (95% CI, 0.92-0.99). CONCLUSION: ATFLA is a new morphological parameter for evaluating chronic ankle sprain, and may even be more sensitive than ATFLT.

Increased biomass and lipid production by continuous cultivation of Nannochloropsis salina transformant overexpressing a bHLH transcription factor.

Microalgae are promising feedstocks for sustainable and eco-friendly production of biomaterials, which can be improved by genetic engineering. It is also necessary to optimize the processes to produce biomaterials from engineered microalgae. We previously reported that genetic improvements of an industrial microalga Nannochloropsis salina by overexpressing a basic helix-loop-helix transcription factor (NsbHLH2). These transformants showed an improved growth and lipid production particularly during the early phase of culture under batch culture. However, they had faster uptake of nutrients, resulting in earlier starvation and reduced growth during the later stages. We attempted to optimize the growth and lipid production by growing one of the transformants in continuous culture with variable dilution rate and feed nitrogen concentration. Relative to wild-type, NsbHLH2 transformant consumed more nitrate at a high dilution rate (0.5 day -1 ), and had greater biomass production. Subsequently, nitrogen limitation at continuous cultivation led to an increased fatty acid methyl ester production by 83.6 mg l -1 day -1 . To elucidate genetic mechanisms, we identified the genes containing E-boxes, known as binding sites for bHLH transcription factors. Among these, we selected 18 genes involved in the growth and lipid metabolism, and revealed their positive contribution to the phenotypes via quantitative real-time polymerase chain reaction. These results provide proof-of-concept that NsbHLH2 can be used to produce biomass and lipids.

Transcription factor YY1 is essential for regulation of the Th2 cytokine locus and for Th2 cell differentiation.

The Th2 locus control region (LCR) has been shown to be important in efficient and coordinated cytokine gene regulation during Th2 cell differentiation. However, the molecular mechanism for this is poorly understood. To study the molecular mechanism of the Th2 LCR, we searched for proteins binding to it. We discovered that transcription factor YY1 bound to the LCR and the entire Th2 cytokine locus in a Th2-specific manner. Retroviral overexpression of YY1 induced Th2 cytokine expression. CD4-specific knockdown of YY1 in mice caused marked reduction in Th2 cytokine expression, repressed chromatin remodeling, decreased intrachromosomal interactions, and resistance in an animal model of asthma. YY1 physically associated with GATA-binding protein-3 (GATA3) and is required for GATA3 binding to the locus. YY1 bound to the regulatory elements in the locus before GATA3 binding. Thus, YY1 cooperates with GATA3 and is required for regulation of the Th2 cytokine locus and Th2 cell differentiation.

A randomized, double-blind trial evaluating the efficacy of palonosetron with total intravenous anesthesia using propofol and remifentanil for the prevention of postoperative nausea and vomiting after gynecologic surgery.

PURPOSE: Palonosetron has potent and long-acting antiemetic effects for postoperative nausea and vomiting (PONV). The aim of this study was to prospectively evaluate the efficacy of palonosetron when used with total intravenous anesthesia (TIVA) using propofol and remifentanil for the prevention of PONV in patients undergoing laparoscopic gynecologic surgery. METHODS: This prospective double-blind study comprised 100 female American Society of Anesthesiologist physical status I and II patients who were undergoing laparoscopic gynecologic surgery under TIVA. The patients were randomly assigned to two groups-the palonosetron plus TIVA group (palonosetron 0.075 mg i.v., n = 50) and the TIVA group (normal saline 1.5 ml i.v., n = 50). The treatments were given before the induction of anesthesia. The incidence of PONV, severity, number of rescue antiemetics, adverse effects, and patient satisfaction during the first 24 h after surgery were evaluated. RESULTS: The demographic profiles of the patients in the two groups were comparable. The overall incidence of PONV (0-24 h) was significantly lower in the TIVA plus palonosetron group than in the TIVA group (34 vs 58 %, p = 0.027). In particular, during the 6-24 h after surgery, the incidence of PONV (14 vs 30 %, p = 0.03) and the incidence of moderate to severe nausea (6 vs 22 %, p = 0.041) were significantly lower in the TIVA plus palonosetron group than in the TIVA group. There were no significant differences in adverse effects, use of rescue antiemetics or patient satisfaction. CONCLUSION: Combining palonosetron with TIVA can be considered as a good method to prevent PONV, not only during the short postoperative period but also especially during the 6-24-h period after anesthesia.

Clinical symptoms of lumbar spinal stenosis associated with morphological parameters on magnetic resonance images.

PURPOSE: This study aimed to investigate the association between the clinical symptoms of central lumbar spinal stenosis (CLSS) and morphological parameters using magnetic resonance imaging (MRI) data. METHODS: We retrospectively reviewed 117 patients who visited our pain clinic from 2009 to 2013 and were diagnosed as CLSS. All patients underwent MRI of the L-spine and we measured the dural sac cross-sectional area (DSA), spinal canal cross-sectional area (SCA), ligamentum flavum cross-sectional area (LFA) and ligamentum flavum thickness (LFT) at the most stenotic intervertebral level on MRI. Clinical outcomes were investigated using the patient-assessed quantitative measurement of visual analog scale (VAS) and subjective disability was assessed by the Oswestry Disability Index (ODI). Additionally, subjective walking distance (SWD) was also collected from electronic medical records. RESULTS: There were no statistically significant correlations found between the VAS score and the DSA, SCA, LFA, and LFT. A statistically significant linear association existed between the DSA and SCA and the subjective walking distance (r=0.201, P=0.045 and r=0.198, P=0.049, respectively) indicating that the larger the DSA or SCA, the longer the SWD before the occurrence of claudication. The LFA and LFT were significantly correlated with the ODI score (r=0.249, P=0.007 and r=0.250, P=0.007, respectively). CONCLUSION: Larger LFA and LFT values are associated with higher ODI values. A larger DSA and SCA are associated with a longer SWD before claudication occurs. To evaluate CLSS patients, clinicians should more carefully inspect the integral morphological parameters than the individual morphological parameters.

Surgical versus nonsurgical management of lumbar degenerative spondylolisthesis based on spinal canal cross-sectional area.

Disability and pain associated with lumbar degenerative spondylolisthesis (LDS) result in a significant burden on both the healthcare costs and patients' quality of life. Currently, there exists controversy regarding employment of either nonsurgical management (NSM) or surgical management (SM) in a clinical setting. Spinal canal cross-sectional area (SCA) has been an important morphological parameter for the analysis of LDS. However, there is lack of research about the comparative value of NSM and SM according to SCA. Moreover, previous research have not yet evaluated the clinical most suitable cutoff values of SCA. The objective of this research was to evaluate the effective of NSM and SM for LDS using SCA as an objective morphological parameter. The axial T2 magnetic resonance imaging images were obtained from each patient. We collected SCA samples from 149 patients with LDS. 72 patients underwent SM and the rest did NSM. We measured SCA at the L4/5 LDS on magnetic resonance imaging using a picture archiving and communications system. We measured SCA at the intervertebral disk posterior border, turning down to reach the facet joint side on the opposite edge at the L4/5 level. The average SCA value was 114.34 ±â€…48.11 mm2 in the NSM group and 69.88 ±â€…27.87 mm2 in the SM group. Therefore, the SM group had considerably lower SCA (P < .001). In view of the effectiveness of SCA as a prediction factor of surgical option, Receiver Operating Characteristic curve analysis show the optimal cutoff value for SCA as 83.21 mm2, with 70.8% sensitivity, 71.4% specificity, and an area under the curve of 0.80 (95% CI, 0.73-0.87). The narrower the SCA, the higher the probability of SM. Thus, it is proposed that to evaluate surgical decision making, the pain physician should carefully inspect the SCA.

Comparing the effectiveness of pulsed radiofrequency treatment to lumbar dorsal root ganglion according to application times in patients with lumbar radicular pain: protocol for a randomised controlled trial.

INTRODUCTION: Lumbar radicular pain (LRP) is a common symptom characterised by a sharp, shooting or lancinating sensation localised to one or more dermatomes of the lumbar spine. Despite its high prevalence and significant impact on quality of life, the most effective conservative treatment for patients with LRP remains uncertain. When conventional treatment methods do not provide satisfactory results, the option of using epidural steroids and/or pulsed radiofrequency (PRF) treatment may be considered as a secondary approach for managing the condition. Ongoing advances in the field have led to a wide range of PRF parameters being investigated and extensively documented. Therefore, this study will aim to evaluate the treatment efficacy, sustainability and adverse effects of PRF application for different durations in patients with LRP. METHODS AND ANALYSIS: This study will be a double-blind, randomised, controlled trial. Eligible patients with LRP who visit the International St. Mary's Hospital pain clinic in Korea will be assigned to three groups (1:1:1 ratio) based on the duration of PRF application: 240, 360 and 480 s. Outcome measures will include an assessment of radicular pain intensity, physical function, global improvement, treatment satisfaction and adverse events. The primary outcome will be a Numeric Rating Scale (NRS) score 3 months after the procedure. The secondary outcomes will be the number of subjects in each group reporting successful treatment defined as a significant decrease of NRS or improved physical function score or high satisfaction at the 3 and 6 months follow-up. X2 or Fisher's exact test and one-way analysis of variance will be used to compare the outcomes. ETHICS AND DISSEMINATION: This trial was approved by the Ethics Committee of Catholic Kwandong University International St. Mary's Hospital (IS23EISE0018). The findings will be disseminated in peer-reviewed journals and at scientific conferences. TRIAL REGISTRATION NUMBER: KCT0008612.

Evaluation of particle generation due to deterioration of flooring in schools.

Particulate matter is harmful to humans. An important indoor source of such particles is the deterioration of floor materials brought about by occupants walking. Accordingly, an experiment was conducted to simulate the deterioration of floor material spacing. Considering a school schedule with repeated semesters and vacations, the experiment was conducted by repeating heat-and-rest cycles. Similar results were obtained for particle emission rates under each condition during the first and second deterioration periods. The PVC tiles generated more particles under aged conditions than under non-aged conditions, whereas the wood generated fewer particles under aged conditions. In addition to the quantitative results, a study was conducted on the characteristics of the generated particles, and the particulate matter found in plastic was confirmed in the PVC tiles. Schools where children are present for more than 6 h a day may be exposed to more particulate matter. Therefore, replacing plastic-based materials with eco-friendly building materials is expected to have long-term health benefits for children.