RESUMO
A method for the amperometric determination of Myo-inositol is presented. Nanostructured copper sulfide material was synthesized by solvothermal method and utilized as sensor matrix. The physico-chemical analysis using XRD, Raman, FE-SEM, TEM, and XPS confirmed the formation of CuS material. The voltammetric response of CuS-modified glassy carbon electrode for a successive Myo-inositol (0.5 µM) addition confirmed that the reaction takes place at the surface of the electrode. The modified electrode resulted in signal enhancement for a linear response ranging from 0.5-8.5 µM at an applied overpotential of 0.65 V with a correlation coefficient value (R2) of 0.99. The sensitivity and limit of detection of the modified electrode were 7.87 µA µM-1 cm-2 and 0.24 µM, respectively. The interfering effect of various compounds present in real samples was examined. Graphical abstract Schematic representation of synthetic protocol of nanostructured CuS and Myo-inositol oxidation on CuS-modified glassy carbon electrode in basic medium.