Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
1.
Environ Sci Pollut Res Int ; 29(15): 21232-21243, 2022 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-34751883

RESUMO

Air pollution control (APC) residues, which are known to be the byproducts of incineration treatment, exhibit a high leaching potential of toxic metals. Calcium silicate hydrate (C-S-H), which is a major hydration product of hardened cement and immobilizes toxic metal, can be formed by the reaction of Ca with pozzolanic Si in a highly alkaline environment. Toxic metals might be immobilized by the addition of pozzolanic material to APC residues (instead of using cement), which is a Ca source and provides an alkaline condition. In this study, diatomite, which mainly comprises amorphous silica (SiO2·nH2O), was investigated as a pozzolanic material for Pb immobilization in APC residues obtained from a municipal solid waste incinerator. APC residues were cured with and without the addition of diatomite at different temperatures. When diatomite was added to APC residues, pozzolanic phases such as C-S-H gel were formed via the consumption of Ca(OH)2 and CaClOH. Compared to APC residues cured without diatomite, the leaching of Pb decreased by 99% for APC residues cured for 14 days with 10% diatomite at 70 °C. The results of sequential chemical extraction showed that water-soluble Pb in APC residues was reduced from 10.3% to nearly zero by the pozzolanic reaction. Consequently, the leaching amount of Pb dropped below 0.3 mg/L (Japanese criteria for landfill disposal). Overall, these experiments provide promising results regarding the possibility of using diatomite for pretreating APC residues.


Assuntos
Poluição do Ar , Metais Pesados , Eliminação de Resíduos , Terra de Diatomáceas , Incineração , Chumbo , Metais Pesados/análise , Eliminação de Resíduos/métodos , Dióxido de Silício , Resíduos Sólidos
2.
J R Soc Interface ; 18(183): 20210546, 2021 10.
Artigo em Inglês | MEDLINE | ID: mdl-34665976

RESUMO

Bacterial biofilms, which can be found wherever there is water and a substrate, can cause chronic infections and clogging of industrial flow systems. Despite intensive investigation of the dynamics and rheological properties of biofilms, the impact of their rheological properties on streamer growth remains unknown. We numerically simulated biofilm growth in a pillar-flow and investigated the effects of rheological properties of a filamentous flow-shaped biofilm, called a 'streamer', on its formation by varying the viscoelasticity. The flow-field is assumed to be a Stokes flow and is solved by a boundary element method. A Maxwell model is used for extracellular matrix-mediated streamer growth to express the fluidity of streamer formations. Both high elastic modulus and viscosity are needed for streamer formation, and high viscosity promotes streamer growth at low cell concentrations. Our findings are consistent with experimental observations and can explain the relationship between the cell concentrations and viscosity at which streamers form.


Assuntos
Bactérias , Biofilmes , Reologia , Viscosidade
3.
Sci Rep ; 11(1): 15870, 2021 Aug 05.
Artigo em Inglês | MEDLINE | ID: mdl-34354093

RESUMO

Tensile mechanical properties of fully recrystallized TWIP steel specimens having various grain sizes (d) ranging from 0.79 µm to 85.6 µm were investigated. It was confirmed that the UFG specimens having the mean grain sizes of 1.5 µm or smaller abnormally showed discontinuous yielding characterized by a clear yield-drop while the specimens having grain sizes larger than 2.4 µm showed normal continuous yielding. In-situ synchrotron radiation XRD showed dislocation density around yield-drop in the UFG specimen quickly increased. ECCI observations revealed the nucleation of deformation twins and stacking faults from grain boundaries in the UFG specimen around yielding. Although it had been conventionally reported that the grain refinement suppresses deformation twinning in FCC metals and alloys, the number density of deformation twins in the 0.79 µm grain-sized specimen was much higher than that in the specimens with grain sizes of 4.5 µm and 15.4 µm. The unusual change of yielding behavior from continuous to discontinuous manner by grain refinement could be understood on the basis of limited number of free dislocations in each ultrafine grain. The results indicated that the scarcity of free dislocations in the recrystallized UFG specimens changed the deformation and twinning mechanisms in the TWIP steel.

4.
Environ Sci Pollut Res Int ; 25(21): 20700-20712, 2018 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-29754297

RESUMO

Impacts of secondary generated minerals on mineralogical and physical immobilization of toxic elements were investigated for chelate-treated air pollution control (APC) fly ash of a municipal solid waste incinerator. Scanning electron microscope (SEM) observation showed that ettringite was generated after the moistening treatment with/without chelate. Although ettringite can incorporate toxic elements into its structure, elemental analysis by energy dispersive X-ray could not find concentrated points of toxic elements in ettringite structure. This implies that mineralogical immobilization of toxic element by the encapsulation to ettringite structure seems to be limited. Physical immobilization was also investigated by SEM observation of the same APC fly ash particles before and after the moistening treatment. The transfer of soluble elements was inhibited only when insoluble minerals such as gypsum were generated and covered the surface of fly ash particles. Neoformed insoluble minerals prevented soluble elements from leaching and transfer. However, such physical immobilization seems to be limited because insoluble mineral formation with surface coverage was monitored only one time of more than 20 observations. Although uncertainty owing to limited samples with limited observations should be considered, this study concludes that mineralogical and physical immobilization of toxic elements by secondary minerals is limited although secondary minerals are always generated on the surface of APC fly ash particles during chelate treatment.


Assuntos
Poluição do Ar/prevenção & controle , Cinza de Carvão/química , Incineração , Minerais/química , Resíduos Sólidos/análise , Poluição do Ar/análise , Ditiocarb/química , Japão , Modelos Teóricos , Propriedades de Superfície
5.
Environ Sci Pollut Res Int ; 23(1): 734-43, 2016 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-26336844

RESUMO

Leaching behaviors of heavy metals contained in municipal solid waste incineration (MSWI) fly ash have been studied well. However, micro-characteristics of MSWI fly ash particles are still uncertain and might be non-negligible to describe their leaching behaviors. Therefore, this study investigated micro-characteristics of MSWI fly ash particles, especially their structural properties and impacts of chelate treatment on surface characteristics. According to SEM observations, raw fly ash particles could be categorized into four types based on their shapes. Because chelate treatment changed the surface of fly ash particles dramatically owing to secondary mineral formations like ettringite, two more types could be categorized for chelate-treated fly ash particles. Acid extraction experiments suggest that fly ash particles, tested in this study, consist of Si-base insoluble core structure, Al/Ca/Si-base semi-soluble matrices inside the body, and KCl/NaCl-base soluble aggregates on the surface. Scanning electron microscope (SEM) observations of the same fly ash particles during twice moistening treatments showed that KCl/NaCl moved under wet condition and concentrated at different places on the particle surface. However, element mobility depended on secondary mineral formations. When insoluble mineral like gypsum was generated and covered the particle surface, it inhibited element transfer under wet condition. Surface characteristics including secondary mineral formation of MSWI fly ash particles are likely non-negligible to describe trace element leaching behaviors.


Assuntos
Cinza de Carvão/química , Incineração , Resíduos Sólidos , Carbono/química , Quelantes , Metais Pesados/análise , Minerais/química
6.
Ann Nucl Med ; 16(7): 455-9, 2002 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-12508835

RESUMO

OBJECTIVE: The aim of this study was to assess the utility of 201Tl SPECT in the differential diagnosis of intracranial tumors and to determine the relationship between 201Tl uptake and histological types. METHODS: Thirty-eight patients (19 males and 19 females) with thirty-eight brain tumors were evaluated with 201Tl-SPECT. The early and delayed 201Tl uptake ratio was calculated, and the retention index (RI) was applied as follows; RI = delayed uptake ratio/early uptake ratio. RESULTS: The RI of malignant tumors was higher (0.72 +/- 0.18) than that of benign tumors (0.50 +/- 0.16) and the difference was statistically significant (p = 0.00045). The difference between high-grade glioma (0.80 +/- 0.15) and metastatic tumors (0.64 +/- 0.19) was statistically significant (p = 0.039). CONCLUSION: 201Tl-SPECT may add useful biochemical information and could differentiate malignant brain tumors from benign lesions, but the RI of metastatic tumors varied depending on the organs with the primary lesion and histological types.


Assuntos
Neoplasias Encefálicas/classificação , Neoplasias Encefálicas/diagnóstico por imagem , Tálio , Tomografia Computadorizada de Emissão de Fóton Único/métodos , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Neoplasias Encefálicas/diagnóstico , Neoplasias Encefálicas/metabolismo , Criança , Diagnóstico Diferencial , Feminino , Humanos , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-Idade , Valor Preditivo dos Testes , Compostos Radiofarmacêuticos/farmacocinética , Tálio/farmacocinética
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA