Early-Stage Ice Detection Utilizing High-Order Ultrasonic Guided Waves.

Ice detection poses significant challenges in sectors such as renewable energy and aviation due to its adverse effects on aircraft performance and wind energy production. Ice buildup alters the surface characteristics of aircraft wings or wind turbine blades, inducing airflow separation and diminishing the aerodynamic properties of these structures. While various approaches have been proposed to address icing effects, including chemical solutions, pneumatic systems, and heating systems, these solutions are often costly and limited in scope. To enhance the cost-effectiveness of ice protection systems, reliable information about current icing conditions, particularly in the early stages, is crucial. Ultrasonic guided waves offer a promising solution for ice detection, enabling integration into critical structures and providing coverage over larger areas. However, existing techniques primarily focus on detecting thick ice layers, leaving a gap in early-stage detection. This paper proposes an approach based on high-order symmetric modes to detect thin ice formation with thicknesses up to a few hundred microns. The method involves measuring the group velocity of the S1 mode at different temperatures and correlating velocity changes with ice layer formation. Experimental verification of the proposed approach was conducted using a novel group velocity dispersion curve reconstruction method, allowing for the tracking of propagating modes in the structure. Copper samples without and with special superhydrophobic multiscale coatings designed to prevent ice formation were employed for the experiments. The results demonstrated successful detection of ice formation and enabled differentiation between the coated and uncoated cases. Therefore, the proposed approach can be effectively used for early-stage monitoring of ice growth and evaluating the performance of anti-icing coatings, offering promising advancements in ice detection and prevention for critical applications.

Biphilic Surfaces with Optimum Hydrophobic Islands on a Superhydrophobic Background for Dropwise Flow Condensation.

Sustaining dropwise condensation is of great importance in many applications, especially in confined spaces. In this regard, superhydrophobic surfaces enhance condensation heat transfer performance due to the discrete droplet formation and rapid removal. On the other hand, droplets tend to nucleate easier and faster on hydrophobic surfaces compared to superhydrophobic ones. To take advantage of the mixed wettability, we fabricated biphilic surfaces and integrated them to small channels to assess their effect on thermal performance in flow condensation in small channels. Hydrophobic islands in the range of 100-900 µm diameter were fabricated using a combination of wet etching, surface functionalization, and physical vapor deposition (PVD) techniques. Condensation experiments were performed in a minichannel with a length, width, and height of 37, 10, and 1 mm, respectively. Here, we report optimum island diameters for the hydrophobic islands in terms of the maximum thermal performance. We show that considering the optimum point for each steam mass flux corresponding to the best heat transfer performance, the condensation heat transfer coefficient is increased by 51, 48, 42, 40, and 36% compared to the plain reference hydrophobic surface for steam mass fluxes of 10, 20, 30, 40, and 50 kg/m2 s, respectively. The optimum island diameters are obtained as 200, 300, 400, 400, and 500 µm, with the ratios of hydrophobic to superhydrophobic surface areas (A* = Ahydrophobic/Asuperhydrophobic) of 3.2, 7.6, 14.4, 14.4, and 24.4%, for steam mass fluxes of 10, 20, 30, 40, and 50 kg/m2 s, respectively. The liquid film forming on the liquid-vapor interface acts as an insulation layer and generates thermal resistance, and bridges appear on the patterned areas and deteriorate the thermal performance. Therefore, it is crucial to characterize the role of droplet mobility on biphilic surfaces to avoid the occurrence of bridging. Through visualization, we demonstrate that the optimum conditions correspond to enhanced droplet nucleation and rapid sweeping regions, where droplet pinning and bridging do not occur. The trends in condensation heat transfer with surface mixed wettability can be divided into three regions: enhanced droplet nucleation and rapid sweeping, highly pinned droplet, and bridging droplet segments. We reveal that the interfacial heat transfer augmentation in the enhanced droplet nucleation and rapid sweeping region is due to both spatial control of droplet nucleation and an increase in the sweeping period. Furthermore, by fitting the experimental data, a correlation for predicting the optimum island diameter for biphilic surfaces is proposed for condensation heat transfer in confined channels, which will be a valuable guideline for engineers and researchers working on the design and development of thermal systems.

Is mean platelet volume related to disease activity in systemic lupus erythematosus?

INTRODUCTION: Systemic lupus erythematosus (SLE) is a connective tissue disease that is chronic, recurrent and multisystem with unknown aetiology. There is still no single biomarker that is pathognomonic for the disease. We know that platelets are the main part of haemostasis and thrombosis. We aimed to investigate whether there is a connection between MPV with SLE and inflammatory markers. MATERIAL AND METHODS: We have included 39 female patients with SLE and 45 controls in this study. In both groups, erythrocyte sedimentation rate (ESR), serum C-reactive protein (CRP) levels and MPV levels were investigated. Clinical findings and Systemic Lupus Erythematosus Disease Activity Index (SLEDAI) were evaluated in patients. RESULTS: There was no significant difference between the two groups in terms of demographic data. The MPV was 8.1 ± 0.5 (mean ± SD) in the patient's group and 7.6 ± 0.3 in the control group. There was a significant difference between the two groups in terms of MPV (P < .001). The ESR level was 30.7 ± 29 in the patient's group and 16.7 ± 10 in the control group. In the patient's group, the CRP levels were higher compared with that of the control group (8.2 ± 13, 4.5 ± 4, respectively). We found a statistically significant positive correlation between MPV with arthritis (r = .310,P = .004), nephritis (r = .446,P < .001), central nervous system involvement (r = .241,P = .027), vasculitis (r = .228,P = .037) and SLEDAI (r = .329,P = .002). In our study, we found increased levels of MPV in patients with SLE. Also, we observed a positive correlation among MPV with sedimentation, CRP, clinical manifestations and SLEDAI. CONCLUSION: We consider that MPV may be a new activation indicator for the SLE.

Therapeutic Nanoparticles and Their Targeted Delivery Applications.

Nanotechnology offers many advantages in various fields of science. In this regard, nanoparticles are the essential building blocks of nanotechnology. Recent advances in nanotechnology have proven that nanoparticles acquire a great potential in medical applications. Formation of stable interactions with ligands, variability in size and shape, high carrier capacity, and convenience of binding of both hydrophilic and hydrophobic substances make nanoparticles favorable platforms for the target-specific and controlled delivery of micro- and macromolecules in disease therapy. Nanoparticles combined with the therapeutic agents overcome problems associated with conventional therapy; however, some issues like side effects and toxicity are still debated and should be well concerned before their utilization in biological systems. It is therefore important to understand the specific properties of therapeutic nanoparticles and their delivery strategies. Here, we provide an overview on the unique features of nanoparticles in the biological systems. We emphasize on the type of clinically used nanoparticles and their specificity for therapeutic applications, as well as on their current delivery strategies for specific diseases such as cancer, infectious, autoimmune, cardiovascular, neurodegenerative, ocular, and pulmonary diseases. Understanding of the characteristics of nanoparticles and their interactions with the biological environment will enable us to establish novel strategies for the treatment, prevention, and diagnosis in many diseases, particularly untreatable ones.

The frequency of Raynaud's phenomenon in patients with methylenetetrahydrofolate reductase gene mutation and hyperhomocysteinemia

Background/aim: Raynaud's phenomenon (RP) is not a rare health problem; global prevalence is about 3%­20%. Etiology and pathophysiology of this pathology has not been clarified. There are many precipitating factors resulting in RP. Hyperhomocysteinemia resulting from methylenetetrahydrofolate reductase (MTHFR) gene mutationmay have a role in its etiology. The aim of this study was to observe the frequency of RP in patients with MTFHR gene mutation and hyperhomocysteinemia. Possible relationships among vitamin B12, folic acid, complete blood count (leukocytes and platelets), and c-reactive protein levels and RP were also analyzed. Materials and methods: A total of 388 patients admitted to the internal medicine, hematology, and obstetric clinics of a university hospital between January 2012 and April 2013 ranging in age from 21 to 83 (mean age 38.16 ± 13.1) were enrolled in the study. Eighty-five (21.9%) of the patients were male and 303 (78.1%) were female. MTHFR gene mutation was analyzed in 388 patients; 52 (13.4%) were homozygous, 275 (70.9%) were heterozygous, and 61 (15.7%) were found to be negative for the MTHFR gene mutation and accepted as a control group. Vitamin B12, folic acid, complete blood count (leukocytes and platelets), and c-reactive protein levels were also analyzed. Results: Homocysteine levels were higher in both heterozygous and homozygous groups (P < 0.05). RP was more frequently observed in patients with elevated homocysteine levels (P < 0.05; X2 = 14.51). There was no significant relationship in other parameters studied. Conclusion: RP was more frequently observed in the groups with the MTHFR mutation and hyperhomocysteinemia. Serum homocysteine levels in patients with RP may be helpful for diagnosis.

Entropy Generation Analysis of Laminar Flows of Water-Based Nanofluids in Horizontal Minitubes under Constant Heat Flux Conditions.

During the last decade, second law analysis via entropy generation has become important in terms of entropy generation minimization (EGM), thermal engineering system design, irreversibility, and energy saving. In this study, heat transfer and entropy generation characteristics of flows of multi-walled carbon nanotube-based nanofluids were investigated in horizontal minitubes with outer and inner diameters of ~1067 and ~889 µm, respectively. Carbon nanotubes (CNTs) with outer diameter of 10-20 nm and length of 1-2 µm were used for nanofluid preparation, and water was considered as the base fluid. The entropy generation based on the experimental data, a significant parameter in thermal design system, was examined for CNTs/water nanofluids. The change in the entropy generation was only seen at low mass fractions (0.25 wt.% and 0.5 wt.%). Moreover, to have more insight on the entropy generation of nanofluids based on the experimental data, a further analysis was performed on Al2O3 and TiO2 nanoparticles/water nanofluids from the experimental database of the previous study of the authors. The corresponding results disclosed a remarkable increase in the entropy generation rate when Al2O3 and TiO2 nanoparticles were added to the base fluid.

MTHFR 677C/T and 1298A/C mutations and non-alcoholic fatty liver disease.

Common genetic mutations encountered in folate metabolism may result in increased homocysteine (Hcy) levels. It has been reported that increased serum Hcy levels may affect the intracellular fat metabolism and may cause enhanced fatty infiltration in the liver resulting in non-alcoholic fatty liver disease (NAFLD). In total, 150 patients diagnosed with FLD by ultrasound examination and 136 healthy control patients that do not have any fatty infiltration in the liver were included in the study. Patients were grouped as mild (n = 88), moderate (n = 38) or severe (n = 24) according to the stage of fatty liver in ultrasound. Serum liver function tests, Hcy, folic acid and vitamin B12 levels of the patients were studied. The genetic MTHFR C677T and A1298C polymorphisms of the patients were also evaluated. Although there was no significant difference in vitamin B12 and folic acid levels, in the severe group, Hcy levels were significantly higher than that of control and mild groups (p<0.001). By contrast, there was no significant difference in heterozygote MTHFR 677C/T and 1298A/C mutations, both MTHFR 677C/T and MTHFR 1298A/C mutations were more common in NAFLD groups compared with the control patients (p<0.001). We have determined increased Hcy levels and increased prevalence of homozygote MTHFR 677C/T and MTHFR 1298A/C mutations in patients with NAFLD compared with healthy controls. Larger studies are warranted to clarify the etiological role of the MTHFR mutations and Hcy levels in FLD.

Fibromyalgia in patients with other rheumatic diseases: prevalence and relationship with disease activity.

Fibromyalgia (FM) is a syndrome characterized by chronic widespread pain and the presence of specific tender points. The prevalence of FM has been estimated at 2-7 % of the general global population. The presence of FM in several rheumatic diseases with a structural pathology has been reported as 11-30 %. The objectives of this study were to determine the prevalence of FM and to evaluate the possible relationship between FM existence and disease activity among rheumatic diseases. The study group included 835 patients--197 rheumatoid arthritis (RA), 67 systemic lupus erythematosus (SLE), 119 ankylosing spondylitis (AS), 238 osteoarthritis (OA), 14 familial Mediterranean fever (FMF), 53 Behçet's disease (BD), 71 gout, 25 Sjögren's syndrome (SS), 20 vasculitis, 29 polymyalgia rheumatica (PMR), and two polymyositis (PM)--with or without FM. Recorded information included age, gender, laboratory parameters, presence of fatigue, and disease activity indexes. The prevalence of FM in patients with rheumatologic diseases was found to be 6.6 % for RA, 13.4 % for SLE, 12.6 % for AS, 10.1 % for OA, 5.7 % for BD, 7.1 % for FMF, 12 % for SS, 25 % for vasculitis, 1.4 % for gout, and 6.9 % for PMR. One out of two patients with PM was diagnosed with FM. Some rheumatologic cases (AS, OA) with FM were observed mostly in female patients (p = 0.000). Also, there were significant correlations between disease activity indexes and Fibromyalgia Impact Questionnaire scores for most rheumatologic patients (RA, AS, OA, and BD) (p < 0.05; respectively, r = 0.6, 0.95, 0.887, and 1). Concomitant FM is a common clinical problem in rheumatologic diseases, and its recognition is important for the optimal management of these diseases. Increased pain, physical limitations, and fatigue may be interpreted as increased activity of these diseases, and a common treatment option is the prescription of higher doses of biologic agents or corticosteroids. Considerations of the FM component in the management of rheumatologic diseases increase the likelihood of the success of the treatment.

The flow pattern effects of hydrodynamic cavitation on waste activated sludge digestibility.

The disintegration of raw sludge is of importance for enhancing biogas production and facilitates the degradation of substrates for microorganisms so that the efficiency of digestion can be increased. In this study, the effect of hydrodynamic cavitation (HC) as a pretreatment approach for waste activated sludge (WAS) was investigated at two upstream pressures (0.83 and 1.72 MPa) by using a milli-scale apparatus which makes sludge pass through an orifice with a restriction at the cross section of the flow. The HC probe made of polyether ether ketone (PEEK) material was tested using potassium iodide solution and it was made sure that cavitation occurred at the selected pressures. The analysis on chemical effects of HC bubbles collapse suggested that not only cavitation occurred at low upstream pressure, i.e., 0.83 MPa, but it also had high intensity at this pressure. The pretreatment results of HC implementation on WAS were also in agreement with the chemical characterization of HC collapse. Release of soluble organics and ammonium was observed in the treated samples, which proved the efficiency of the HC pretreatment. The methane production was improved during the digestion of the treated samples compared to the control one. The digestion of treated WAS sample at lower upstream pressure (0.83 MPa) resulted in higher methane production (128.4 mL CH4/g VS) compared to the treated sample at higher upstream pressure (119.1 mL CH4/g VS) and control sample (98.3 mL CH4/g VS). Thus, these results showed that the HC pretreatment for WAS led to a significant increase in methane production (up to 30.6%), which reveals the potential of HC in full-scale applications.

Human Immunodeficiency Virus (HIV)-Negative and Human Herpes Virus-8 (HHV-8)-Positive Primary Effusion Lymphoma: A Case Report and Review of the Literature.

UNLABELLED: Primary effusion lymphoma (PEL) is a rare type of non-Hodgkin lymphoma that presents with serosal effusion in body cavities, without obvious tumor masses. Although PEL occurs in immunocompromised patients that are human immunodeficiency virus (HIV) positive, it also occurs in immunocompetent human herpes virus-8 (HHV-8)-positive patients. Herein we present an immunocompetent, HIV-negative, CD-20-negative, HHV-8-positive patient with pleural effusion that was diagnosed as PEL. The CHOP protocol and talc pleurodesis were administered. HHV-8 plays a causative role in PEL and is important for differentiating PEL from other types of lymphoma. As such, in addition to pleurodesis antiviral treatment should be considered for optimal treatment outcome. CONFLICT OF INTEREST: None declared.

Autophagy-related mechanisms for treatment of multiple myeloma.

Multiple myeloma (MM) is a type of hematological cancer that occurs when B cells become malignant. Various drugs such as proteasome inhibitors, immunomodulators, and compounds that cause DNA damage can be used in the treatment of MM. Autophagy, a type 2 cell death mechanism, plays a crucial role in determining the fate of B cells, either promoting their survival or inducing cell death. Therefore, autophagy can either facilitate the progression or hinder the treatment of MM disease. In this review, autophagy mechanisms that may be effective in MM cells were covered and evaluated within the contexts of unfolded protein response (UPR), bone marrow microenvironment (BMME), drug resistance, hypoxia, DNA repair and transcriptional regulation, and apoptosis. The genes that are effective in each mechanism and research efforts on this subject were discussed in detail. Signaling pathways targeted by new drugs to benefit from autophagy in MM disease were covered. The efficacy of drugs that regulate autophagy in MM was examined, and clinical trials on this subject were included. Consequently, among the autophagy mechanisms that are effective in MM, the most suitable ones to be used in the treatment were expressed. The importance of 3D models and microfluidic systems for the discovery of new drugs for autophagy and personalized treatment was emphasized. Ultimately, this review aims to provide a comprehensive overview of MM disease, encompassing autophagy mechanisms, drugs, clinical studies, and further studies.

Review on Bortezomib Resistance in Multiple Myeloma and Potential Role of Emerging Technologies.

Multiple myeloma is a hematological cancer type. For its treatment, Bortezomib has been widely used. However, drug resistance to this effective chemotherapeutic has been developed for various reasons. 2D cell cultures and animal models have failed to understand the MM disease and Bortezomib resistance. It is therefore essential to utilize new technologies to reveal a complete molecular profile of the disease. In this review, we in-depth examined the possible molecular mechanisms that cause Bortezomib resistance and specifically addressed MM and Bortezomib resistance. Moreover, we also included the use of nanoparticles, 3D culture methods, microfluidics, and organ-on-chip devices in multiple myeloma. We also discussed whether the emerging technology offers the necessary tools to understand and prevent Bortezomib resistance in multiple myeloma. Despite the ongoing research activities on MM, the related studies cannot provide a complete summary of MM. Nanoparticle and 3D culturing have been frequently used to understand MM disease and Bortezomib resistance. However, the number of microfluidic devices for this application is insufficient. By combining siRNA/miRNA technologies with microfluidic devices, a complete molecular genetic profile of MM disease could be revealed. Microfluidic chips should be used clinically in personal therapy and point-of-care applications. At least with Bortezomib microneedles, it could be ensured that MM patients can go through the treatment process more painlessly. This way, MM can be switched to the curable cancer type list, and Bortezomib can be targeted for its treatment with fewer side effects.

New Generation Dielectrophoretic-Based Microfluidic Device for Multi-Type Cell Separation.

This study introduces a new generation of dielectrophoretic-based microfluidic device for the precise separation of multiple particle/cell types. The device features two sets of 3D electrodes, namely cylindrical and sidewall electrodes. The main channel of the device terminates with three outlets: one in the middle for particles that sense negative dielectrophoresis force and two others at the right and left sides for particles that sense positive dielectrophoresis force. To evaluate the device performance, we used red blood cells (RBCs), T-cells, U937-MC cells, and Clostridium difficile bacteria as our test subjects. Our results demonstrate that the proposed microfluidic device could accurately separate bioparticles in two steps, with sidewall electrodes of 200 µm proving optimal for efficient separation. Applying different voltages for each separation step, we found that the device performed most effectively at 6 Vp-p applied to the 3D electrodes, and at 20 Vp-p and 11 Vp-p applied to the sidewall electrodes for separating RBCs from bacteria and T-cells from U937-MC cells, respectively. Notably, the device's maximum electric fields remained below the cell electroporation threshold, and we achieved a separation efficiency of 95.5% for multi-type particle separation. Our findings proved the device's capacity for separating multiple particle types with high accuracy, without limitation for particle variety.

Detergent Dissolution Intensification via Energy-Efficient Hydrodynamic Cavitation Reactors.

In this study, we explored the potential of hydrodynamic cavitation (HC) for use in dissolution of liquid and powder detergents. For this, microfluidic and polyether ether ketone (PEEK) tube HC reactors with different configurations were employed, and the results from the reactors were compared with a magnetic stirrer, as well as a tergotometer. According to our results PEEK tube HC reactors present the best performance for dissolution of liquid and powder detergents. In the case of liquid detergent, for the same level of initial concentration and comparable final dissolution, the PEEK tube consumed 16.7 and 70% of the energy and time of a tergotometer and 16.7 and 14.8% of that of a magnetic stirrer, respectively. In the case of powder detergent, the PEEK tube used 12% less power than a tergotometer and 81.2% less power than a magnetic stirrer. Additionally, the time required to dissolve the detergent was reduced significantly from 1200 s in the tergotometer and 1800 s in the magnetic stirrer to just 50 s in the PEEK tube. These results suggest that HC could significantly improve the dissolution rate of liquid and powder detergents and energy consumption in washing machines.

On the application of hydrodynamic cavitation on a chip in cellular injury and drug delivery.

Hydrodynamic cavitation (HC) is a phase change phenomenon, where energy release in a fluid occurs upon the collapse of bubbles, which form due to the low local pressures. During recent years, due to advances in lab-on-a-chip technologies, HC-on-a-chip (HCOC) and its potential applications have attracted considerable interest. Microfluidic devices enable the performance of controlled experiments by enabling spatial control over the cavitation process and by precisely monitoring its evolution. In this study, we propose the adjunctive use of HC to induce distinct zones of cellular injury and enhance the anticancer efficacy of Doxorubicin (DOX). HC caused different regions (lysis, necrosis, permeabilization, and unaffected regions) upon exposure of different cancer and normal cells to HC. Moreover, HC was also applied to the confluent cell monolayer following the DOX treatment. Here, it was shown that the combination of DOX and HC exhibited a more pronounced anticancer activity on cancer cells than DOX alone. The effect of HC on cell permeabilization was also proven by using carbon dots (CDs). Finally, the cell stiffness parameter, which was associated with cell proliferation, migration and metastasis, was investigated with the use of cancer cells and normal cells under HC exposure. The HCOC offers the advantage of creating well-defined zones of bio-responses upon HC exposure simultaneously within minutes, achieving cell lysis and molecular delivery through permeabilization by providing spatial control. In conclusion, micro scale hydrodynamic cavitation proposes a promising alternative to be used to increase the therapeutic efficacy of anticancer drugs.

A Hybrid Spiral Microfluidic Platform Coupled with Surface Acoustic Waves for Circulating Tumor Cell Sorting and Separation: A Numerical Study.

The separation of circulating tumor cells (CTCs) from blood samples is crucial for the early diagnosis of cancer. During recent years, hybrid microfluidics platforms, consisting of both passive and active components, have been an emerging means for the label-free enrichment of circulating tumor cells due to their advantages such as multi-target cell processing with high efficiency and high sensitivity. In this study, spiral microchannels with different dimensions were coupled with surface acoustic waves (SAWs). Numerical simulations were conducted at different Reynolds numbers to analyze the performance of hybrid devices in the sorting and separation of CTCs from red blood cells (RBCs) and white blood cells (WBCs). Overall, in the first stage, the two-loop spiral microchannel structure allowed for the utilization of inertial forces for passive separation. In the second stage, SAWs were introduced to the device. Thus, five nodal pressure lines corresponding to the lateral position of the five outlets were generated. According to their physical properties, the cells were trapped and lined up on the corresponding nodal lines. The results showed that three different cell types (CTCs, RBCs, and WBCs) were successfully focused and collected from the different outlets of the microchannels by implementing the proposed multi-stage hybrid system.

New Nanofiber Composition for Multiscale Bubble Capture and Separation.

Bubble dynamics inside a liquid medium and its interactions with hydrophobic and hydrophilic surfaces are crucial for many industrial processes. Electrospinning of polymers has emerged as a promising fabrication technique capable of producing a wide variety of hydrophobic and hydrophilic polymer nanofibers and membranes at a low cost. Thus, knowledge about the bubble interactions on electrospun hydrophobic and hydrophilic nanofibers can be utilized for capturing; separating; and transporting macro-, micro-, and nanobubbles. In this study, poly(methyl methacrylate) (PMMA) and PMMA-poly(ethylene glycol) (PEG) electrospun nanofibers were fabricated to investigate gas bubble interactions with submerged nanofiber mats. To improve their durability, the nanofibers were reinforced with a plastic mesh. The ultimate tensile strengths of PMMA and PMMA-30%PEG nanofibers were measured as 0.35 and 0.30 MPa, respectively. With the use of reinforcement mesh, the mechanical properties of final membranes could be improved by a factor of 70. The gas permeability of the electrospun and reinforced nanofibers was also studied using the high-speed visualization technique and a homemade setup to investigate the effect of electrospun nanofibers on the bubble coalescence and size in addition to the frequency of released bubbles from the nanofiber mat. The diffusion rate of air bubbles in hydrophobic PMMA electrospun nanofibers was measured as 10 L/s for each square meter of the nanofiber. However, the PMMA-30%PEG mat was able to restrict the diffusion of gas bubbles through its pores owing to the van der Waals force between the water molecules and nanofiber surface as well as the high stability of the thin water layer. It has been shown that the hydrophobic electrospun nanofibers can capture and coalesce the rising gas bubbles and release them with predictable size and frequency. Consequently, the diameter of bubbles introduced to the hydrophobic PMMA membrane ranged between 2 and 25 mm, whereas the diameter of bubbles released from the hydrophobic electrospun nanofibers was measured as 8 ± 1 mm. The proposed mechanism and fabricated electrospun nanofibers can enhance the efficiency of various systems such as heat exchangers, liquid-gas separation filters, and direct air capture (DAC) systems.

Fundamentals, biomedical applications and future potential of micro-scale cavitation-a review.

Thanks to the developments in the area of microfluidics, the cavitation-on-a-chip concept enabled researchers to control and closely monitor the cavitation phenomenon in micro-scale. In contrast to conventional scale, where cavitation bubbles are hard to be steered and manipulated, lab-on-a-chip devices provide suitable platforms to conduct smart experiments and design reliable devices to carefully harness the collapse energy of cavitation bubbles in different bio-related and industrial applications. However, bubble behavior deviates to some extent when confined to micro-scale geometries in comparison to macro-scale. Therefore, fundamentals of micro-scale cavitation deserve in-depth investigations. In this review, first we discussed the physics and fundamentals of cavitation induced by tension-based as well as energy deposition-based methods within microfluidic devices and discussed the similarities and differences in micro and macro-scale cavitation. We then covered and discussed recent developments in bio-related applications of micro-scale cavitation chips. Lastly, current challenges and future research directions towards the implementation of micro-scale cavitation phenomenon to emerging applications are presented.

Pathogens in ticks collected in Israel: II. Bacteria and protozoa found in Rhipicephalus sanguineus sensu lato and Rhipicephalus turanicus.

Rhipicephalus sanguineus sensu lato and Rhipicephalus turanicus are very prevalent in Israel and are known to be vectors of human and animal diseases. The aim of this study was to identify the pathogens found in questing ticks and such parasitizing domestic and wild animals. Ticks were collected from 16 localities in Israel with the flagging technique and by examining dogs, hedgehogs, a badger and a tortoise. Bacterial and protozoal pathogens were analyzed by PCR and sequencing. Overall, 374 R. sanguineus s.l. specimens were collected, out of which 142 by flagging and 132 from six dogs. Rickettsia africae, Rickettsia massiliae, Rickettsia conorii subsp. israelensis, and Anaplasma sp. were identified in ticks collected by flagging, Rickettsia aeschlimannii was found only in specimens collected from dogs, while Ehrlichia sp., Coxiella burnetii, Hepatozoon canis and Leishmania infantum were recorded in ticks collected by flagging and from dogs. Out of 226 specimens of R. turanicus, 124 were collected by flagging, while additional 33 from eight dogs, 64 from seven southern white-breasted hedgehogs (Erinaceus concolor), two from a European badger (Meles meles) and one from a Greek tortoise (Testudo graeca). Out of 65 R. sanguineus s.l. pools 17 (26.2%) had pathogens, while seven of them were positive for one pathogen, and 10 for two pathogens. In 43 R. turanicus pools, R. aeschlimannii R. africae, Rickettsia barbariae, R. massiliae, Anaplasma sp., Ehrlichia sp. and C. burnetii, as well as Babesia microti, B. vogeli, Hepatozoon felis, and L. infantum was detected, while Listeria monocytogenes, Bartonella sp. and Toxoplasma gondii were negative in all R. sanguineus s.l. and R. turanicus pools examined. In conclusion, Babesia microti is reported for the first time in Israel, R. africae, R. aeschlimannii, C. burnetii and L. infantum are reported for the first time in R. sanguineus s.l. and R. turanicus, while H. felis is reported for the first time from R. turanicus in the country.

Hydrodynamic Cavitation on a Chip: A Tool to Detect Circulating Tumor Cells.

Circulating tumor cells (CTCs) are essential biomarkers for cancer diagnosis. Although various devices have been designed to detect, enumerate, and isolate CTCs from blood, some of these devices could have some drawbacks, such as the requirement of labeling, long process time, and high cost. Here, we present a microfluidic device based on the concept of "hydrodynamic cavitation-on-chip (HCOC)", which can detect CTCs in the order of minutes. The working principle relies on the difference of the required inlet pressure for cavitation inception of working fluids when they pass through the microfluidic device. The interface among the solid/floating particles, liquid, and vapor phases plays an important role in the strength of the fluid to withstand the rupture and cavitation formation. To this end, four experimental groups, including the "cell culture medium", "medium + Jurkat cells", "medium + Jurkat cells + CTCs", and "medium + CTCs", were tested as a proof of concept with two sets of fabricated microfluidic chips with the same geometrical dimensions, in which one set contained structural sidewall roughness elements. Jurkat cells were used to mimic white blood cells, and MDA-MB-231 cells were spiked into the medium as CTCs. Accordingly, the group with CTCs led to detectable earlier cavitation inception. Additionally, the effect of the CTC concentration on cavitation inception and the effect of the presence of sidewall roughness elements on the earlier inception were evaluated. Furthermore, CTC detection tests were performed with cancer cell lines spiked in blood samples from healthy donors. The results showed that this approach, HCOC, could be a potential approach to detect the presence of CTCs based on cavitation phenomenon and offer a cheap, user-friendly, and rapid tool with no requirement for any biomarker or extensive films acting as a biosensor. This approach also possesses straightforward application procedures to be employed for detection of CTCs.