Recent Advances in Solvents for the Dissolution, Shaping and Derivatization of Cellulose: Quaternary Ammonium Electrolytes and their Solutions in Water and Molecular Solvents.

There is a sustained interest in developing solvents for physically dissolving cellulose, i.e., without covalent bond formation. The use of ionic liquids, ILs, has generated much interest because of their structural versatility that results in efficiency as cellulose solvents. Despite some limitations, imidazole-based ILs have received most of the scientific community's attention. The objective of the present review is to show the advantages of using quaternary ammonium electrolytes, QAEs, including salts of super bases, as solvents for cellulose dissolution, shaping, and derivatization, and as a result, increase the interest in further investigation of these important solvents. QAEs share with ILs structural versatility; many are liquids at room temperature or are soluble in water and molecular solvents (MSs), in particular dimethyl sulfoxide. In this review we first give a historical background on the use of QAEs in cellulose chemistry, and then discuss the common, relatively simple strategies for their synthesis. We discuss the mechanism of cellulose dissolution by QAEs, neat or as solutions in MSs and water, with emphasis on the relevance to cellulose dissolution efficiency of the charge and structure of the cation and. We then discuss the use of cellulose solutions in these solvents for its derivatization under homogeneous and heterogeneous conditions. The products of interest are cellulose esters and ethers; our emphasis is on the role of solvent and possible side reactions. The final part is concerned with the use of cellulose dopes in these solvents for its shaping as fibers, a field with potential commercial application.

Acetone-based cellulose solvent.

Acetone containing tetraalkylammonium chloride is found to be an efficient solvent for cellulose. The addition of an amount of 10 mol% (based on acetone) of well-soluble salt triethyloctylammonium chloride (Et3 OctN Cl) adjusts the solvent's properties (increases the polarity) to promote cellulose dissolution. Cellulose solutions in acetone/Et3 OctN Cl have the lowest viscosity reported for comparable aprotic solutions making it a promising system for shaping processes and homogeneous chemical modification of the biopolymer. Recovery of the polymer and recycling of the solvent components can be easily achieved.

Efficient cellulose solvent: quaternary ammonium chlorides.

Pure quaternary tetraalkylammonium chlorides with one long alkyl chain dissolved in various organic solvents constitute a new class of cellulose solvents. The electrolytes are prepared in high yields and purity by Menshutkin quaternization, an inexpensive and easy synthesis route. The pure molten tetraalkylammonium chlorides dissolve up to 15 wt% of cellulose. Cosolvents, including N,N-dimethylacetamide (DMA), may be added in large excess, leading to a system of decreased viscosity. Contrary to the well-established solvent DMA/LiCl, cellulose dissolves in DMA/quaternary ammonium chlorides without any pretreatment. Thus, the use of the new solvent avoids some disadvantages of DMA/LiCl and ionic liquids, the most extensively employed solvents for homogeneous cellulose chemistry.

Engineering of sustainable biomaterial composites from cellulose and silk fibroin: Fundamentals and applications.

This review addresses composites prepared from cellulose (Cel) and silk fibroin (SF) to generate multifunctional, biocompatible, biodegradable materials such as fibers, films and scaffolds for tissue engineering. First, we discuss briefly the molecular structures of Cel and SF. Their structural features explain why certain solvents, e.g., ionic liquids, inorganic electrolyte solutions dissolve both biopolymers. We discuss the mechanisms of Cel dissolution because in many cases they also apply to (much less studied) SF dissolution. Subsequently, we discuss the fabrication and characterization of Cel/SF composite biomaterials. We show how the composition of these materials beneficially affects their mechanical properties, compared to those of the precursor biopolymers. We also show that Cel/SF materials are excellent and versatile candidates for biomedical applications because of the inherent biocompatibility of their components.

Dissolution of Silk Fibroin in Mixtures of Ionic Liquids and Dimethyl Sulfoxide: On the Relative Importance of Temperature and Binary Solvent Composition.

We studied the dependence of dissolution of silk fibroin (SF) in mixtures of DMSO with ionic liquids (ILs) on the temperature (T = 40 to 80 °C) and DMSO mole fraction (χDMSO = 0.5 to 0.9). The ILs included BuMeImAcO, C3OMeImAcO, AlBzMe2NAcO, and Bu4NAcO; see the names and structures below. We used design of experiments (DOE) to determine the dependence of mass fraction of dissolved SF (SF-m%) on T and χDMSO. We successfully employed a second-order polynomial to fit the biopolymer dissolution data. The resulting regression coefficients showed that the dissolution of SF in BuMeImAcO-DMSO and C3OMeImAcO-DMSO is more sensitive to variation of T than of χDMSO; the inverse is observed for the quaternary ammonium ILs. Using BuMeImAcO, AlBzMe2NAcO, and molecular dynamics simulations, we attribute the difference in IL efficiency to stronger SF-IL hydrogen bonding with the former IL, which is coupled with the difference in the molecular volumes and the rigidity of the phenyl ring of the latter IL. The order of SF dissolution is BuMeImAcO-DMSO > C3OMeImAcO-DMSO; this was attributed to the formation of intramolecular H-bonding between the ether oxygen in the side chain of the latter IL and the relatively acidic hydrogens of the imidazolium cation. Using DOE, we were able to predict values of SF-m%; this is satisfactory and important because it results in economy of labor, time, and material.

Dependence of cellulose dissolution in quaternary ammonium-based ionic liquids/DMSO on the molecular structure of the electrolyte.

We synthesized a series of quaternary ammonium acetates (QAAcOs) and assessed their solutions in DMSO as cellulose solvents. NBz111AcO/DMSO did not dissolve cellulose; substitution of its methyl groups resulted in efficient cellulose solvents; NBz31AcO/DMSO dissolved cellulose with difficulty. We attribute the inefficiency of both QAAcOs to: strong anion-cation interactions, NBz111AcO; steric effects and cation-cation hydrophobic interactions, NBz31AcO. Using isothermal titration calorimetry, we determined the enthalpies (HE) of QAAcO (endothermic) dissolution, and QAAcO/cellobiose (exothermic) interactions; both in dimethyl sulfoxide/acetonitrile. The ratios of HE are 5.34:1:1.45, for NBz111AcO, NAl2Bz1AcO, and NBz31AcO, respectively, i.e., dissolution of the first and third QAAcO in the solvent requires more energy. The corresponding ratios for QAAcO interaction with cellobiose are: 0.74:1:0.79, i.e., the second QAAcO interacts more strongly with cellobiose. This order of solvent efficiency is corroborated by SEM images of regenerated cotton linters. Light scattering showed that dissolved cellulose can be regenerated as nanoparticles by dialysis.

Cellulose in Ionic Liquids and Alkaline Solutions: Advances in the Mechanisms of Biopolymer Dissolution and Regeneration.

This review is focused on assessment of solvents for cellulose dissolution and the mechanism of regeneration of the dissolved biopolymer. The solvents of interest are imidazole-based ionic liquids, quaternary ammonium electrolytes, salts of super-bases, and their binary mixtures with molecular solvents. We briefly discuss the mechanism of cellulose dissolution and address the strategies for assessing solvent efficiency, as inferred from its physico-chemical properties. In addition to the favorable effect of lower cellulose solution rheology, microscopic solvent/solution properties, including empirical polarity, Lewis acidity, Lewis basicity, and dipolarity/polarizability are determinants of cellulose dissolution. We discuss how these microscopic properties are calculated from the UV-Vis spectra of solvatochromic probes, and their use to explain the observed solvent efficiency order. We dwell briefly on use of other techniques, in particular NMR and theoretical calculations for the same purpose. Once dissolved, cellulose is either regenerated in different physical shapes, or derivatized under homogeneous conditions. We discuss the mechanism of, and the steps involved in cellulose regeneration, via formation of mini-sheets, association into "mini-crystals", and convergence into larger crystalline and amorphous regions. We discuss the use of different techniques, including FTIR, X-ray diffraction, and theoretical calculations to probe the forces involved in cellulose regeneration.

Stable cellulose nanospheres for cellular uptake.

Pure, perfectly spherical cellulose nanoparticles with sizes of ≈80-260 nm can be prepared by dialysis starting from trimethylsilylcellulose (TMSC). The aqueous suspensions obtained are storable for several months. Subsequent covalent labeling of the cellulose nanoparticles with FITC has no influence on particle size, shape, and stability. The particles can be sterilized and suspended in biological media without structural changes. Incorporation of FITC-labeled cellulose nanoparticles into living human fibroblasts is studied using confocal LSM. In contrast to cellulose nanocrystals, fast cellular uptake is found for the nanospheres without transfection reagents or attachment of a receptor molecule. This suggests an influence of the geometry of biocompatible nanomaterials on endocytosis.