Architecture of the centriole cartwheel-containing region revealed by cryo-electron tomography.

Centrioles are evolutionarily conserved barrels of microtubule triplets that form the core of the centrosome and the base of the cilium. While the crucial role of the proximal region in centriole biogenesis has been well documented, its native architecture and evolutionary conservation remain relatively unexplored. Here, using cryo-electron tomography of centrioles from four evolutionarily distant species, we report on the architectural diversity of the centriole's proximal cartwheel-bearing region. Our work reveals that the cartwheel central hub is constructed from a stack of paired rings with cartwheel inner densities inside. In both Paramecium and Chlamydomonas, the repeating structural unit of the cartwheel has a periodicity of 25 nm and consists of three ring pairs, with 6 radial spokes emanating and merging into a single bundle that connects to the microtubule triplet via the D2-rod and the pinhead. Finally, we identified that the cartwheel is indirectly connected to the A-C linker through the triplet base structure extending from the pinhead. Together, our work provides unprecedented evolutionary insights into the architecture of the centriole proximal region, which underlies centriole biogenesis.

The cytoplasmic domain of the AAA+ protease FtsH is tilted with respect to the membrane to facilitate substrate entry.

AAA+ proteases are degradation machines that use ATP hydrolysis to unfold protein substrates and translocate them through a central pore toward a degradation chamber. FtsH, a bacterial membrane-anchored AAA+ protease, plays a vital role in membrane protein quality control. How substrates reach the FtsH central pore is an open key question that is not resolved by the available atomic structures of cytoplasmic and periplasmic domains. In this work, we used both negative stain TEM and cryo-EM to determine 3D maps of the full-length Aquifex aeolicus FtsH protease. Unexpectedly, we observed that detergent solubilization induces the formation of fully active FtsH dodecamers, which consist of two FtsH hexamers in a single detergent micelle. The striking tilted conformation of the cytosolic domain in the FtsH dodecamer visualized by negative stain TEM suggests a lateral substrate entrance between the membrane and cytosolic domain. Such a substrate path was then resolved in the cryo-EM structure of the FtsH hexamer. By mapping the available structural information and structure predictions for the transmembrane helices to the amino acid sequence we identified a linker of ∼20 residues between the second transmembrane helix and the cytosolic domain. This unique polypeptide appears to be highly flexible and turned out to be essential for proper functioning of FtsH as its deletion fully eliminated the proteolytic activity of FtsH.

Triplet-pore structure of a highly divergent TOM complex of hydrogenosomes in Trichomonas vaginalis.

Mitochondria originated from proteobacterial endosymbionts, and their transition to organelles was tightly linked to establishment of the protein import pathways. The initial import of most proteins is mediated by the translocase of the outer membrane (TOM). Although TOM is common to all forms of mitochondria, an unexpected diversity of subunits between eukaryotic lineages has been predicted. However, experimental knowledge is limited to a few organisms, and so far, it remains unsettled whether the triplet-pore or the twin-pore structure is the generic form of TOM complex. Here, we analysed the TOM complex in hydrogenosomes, a metabolically specialised anaerobic form of mitochondria found in the excavate Trichomonas vaginalis. We demonstrate that the highly divergent ß-barrel T. vaginalis TOM (TvTom)40-2 forms a translocation channel to conduct hydrogenosomal protein import. TvTom40-2 is present in high molecular weight complexes, and their analysis revealed the presence of four tail-anchored (TA) proteins. Two of them, Tom36 and Tom46, with heat shock protein (Hsp)20 and tetratricopeptide repeat (TPR) domains, can bind hydrogenosomal preproteins and most likely function as receptors. A third subunit, Tom22-like protein, has a short cis domain and a conserved Tom22 transmembrane segment but lacks a trans domain. The fourth protein, hydrogenosomal outer membrane protein 19 (Homp19) has no known homology. Furthermore, our data indicate that TvTOM is associated with sorting and assembly machinery (Sam)50 that is involved in ß-barrel assembly. Visualisation of TvTOM by electron microscopy revealed that it forms three pores and has an unconventional skull-like shape. Although TvTOM seems to lack Tom7, our phylogenetic profiling predicted Tom7 in free-living excavates. Collectively, our results suggest that the triplet-pore TOM complex, composed of three conserved subunits, was present in the last common eukaryotic ancestor (LECA), while receptors responsible for substrate binding evolved independently in different eukaryotic lineages.

Microfluidic protein isolation and sample preparation for high-resolution cryo-EM.

High-resolution structural information is essential to understand protein function. Protein-structure determination needs a considerable amount of protein, which can be challenging to produce, often involving harsh and lengthy procedures. In contrast, the several thousand to a few million protein particles required for structure determination by cryogenic electron microscopy (cryo-EM) can be provided by miniaturized systems. Here, we present a microfluidic method for the rapid isolation of a target protein and its direct preparation for cryo-EM. Less than 1 µL of cell lysate is required as starting material to solve the atomic structure of the untagged, endogenous human 20S proteasome. Our work paves the way for high-throughput structure determination of proteins from minimal amounts of cell lysate and opens more opportunities for the isolation of sensitive, endogenous protein complexes.

Single particle cryo-EM of the complex between interphotoreceptor retinoid-binding protein and a monoclonal antibody.

Interphotoreceptor retinoid-binding protein (IRBP) is a highly expressed protein secreted by rod and cone photoreceptors that has major roles in photoreceptor homeostasis as well as retinoid and polyunsaturated fatty acid transport between the neural retina and retinal pigment epithelium. Despite two crystal structures reported on fragments of IRBP and decades of research, the overall structure of IRBP and function within the visual cycle remain unsolved. Here, we studied the structure of native bovine IRBP in complex with a monoclonal antibody (mAb5) by cryo-electron microscopy, revealing the tertiary and quaternary structure at sufficient resolution to clearly identify the complex components. Complementary mass spectrometry experiments revealed the structure and locations of N-linked carbohydrate post-translational modifications. This work provides insight into the structure of IRBP, displaying an elongated, flexible three-dimensional architecture not seen among other retinoid-binding proteins. This work is the first step in elucidation of the function of this enigmatic protein.

Poly(ethylene oxide monomethyl ether)- block-poly(propylene succinate) Nanoparticles: Synthesis and Characterization, Enzymatic and Cellular Degradation, Micellar Solubilization of Paclitaxel, and in Vitro and in Vivo Evaluation.

Polyester-based nanostructures are widely studied as drug-delivery systems due to their biocompatibility and biodegradability. They are already used in the clinic. In this work, we describe a new and simple biodegradable and biocompatible system as the Food and Drug Administration approved polyesters (poly-ε-caprolactone, polylactic acid, and poly(lactic- co-glycolic acid)) for the delivery of the anticancer drug paclitaxel (PTX) as a model drug. A hydrophobic polyester, poly(propylene succinate) (PPS), was prepared from a nontoxic alcohol (propylene glycol) and monomer from the Krebs's cycle (succinic acid) in two steps via esterification and melt polycondensation. Furthermore, their amphiphilic block copolyester, poly(ethylene oxide monomethyl ether)- block-poly(propylene succinate) (mPEO- b-PPS), was prepared by three steps via esterification followed by melt polycondensation and the addition of mPEO to the PPS macromolecules. Analysis of the in vitro cellular behavior of the prepared nanoparticle carriers (NPs) (enzymatic degradation, uptake, localization, and fluorescence resonance energy-transfer pair degradation studies) was performed by fluorescence studies. PTX was loaded to the NPs of variable sizes (30, 70, and 150 nm), and their in vitro release was evaluated in different cell models and compared with commercial PTX formulations. The mPEO- b-PPS copolymer analysis displays glass transition temperature < body temperature < melting temperature, lower toxicity (including the toxicity of their degradation products), drug solubilization efficacy, stability against spontaneous hydrolysis during transport in bloodstream, and simultaneous enzymatic degradability after uptake into the cells. The detailed cytotoxicity in vitro and in vivo tumor efficacy studies have shown the superior efficacy of the NPs compared with PTX and PTX commercial formulations.

System with embedded drug release and nanoparticle degradation sensor showing efficient rifampicin delivery into macrophages.

We have developed a biodegradable, biocompatible system for the delivery of the antituberculotic antibiotic rifampicin with a built-in drug release and nanoparticle degradation fluorescence sensor. Polymer nanoparticles based on poly(ethylene oxide) monomethyl ether-block-poly(ε-caprolactone) were noncovalently loaded with rifampicin, a combination that, to best of our knowledge, was not previously described in the literature, which showed significant benefits. The nanoparticles contain a Förster resonance energy transfer (FRET) system that allows real-time assessment of drug release not only in vitro, but also in living macrophages where the mycobacteria typically reside as hard-to-kill intracellular parasites. The fluorophore also enables in situ monitoring of the enzymatic nanoparticle degradation in the macrophages. We show that the nanoparticles are efficiently taken up by macrophages, where they are very quickly associated with the lysosomal compartment. After drug release, the nanoparticles in the cmacrophages are enzymatically degraded, with half-life 88±11 min.

Synthesis and supramolecular properties of regioisomers of mononaphthylallyl derivatives of γ-cyclodextrin.

Monosubstituted derivatives of γ-cyclodextrin (γ-CD) are suitable building blocks for supramolecular polymers, and can also serve as precursors for the synthesis of other regioselectively monosubstituted γ-CD derivatives. We prepared a set of monosubstituted 2I-O-, 3I-O-, and 6I-O-(3-(naphthalen-2-yl)prop-2-en-1-yl) derivatives of γ-CD using two different methods. A key step of the first synthetic procedure is a cross-metathesis between previously described regioisomers of mono-O-allyl derivatives of γ-CD and 2-vinylnaphthalene which gives yields of about 16-25% (2-5% starting from γ-CD). To increase the overall yields, we have developed another method, based on a direct alkylation of γ-CD with 3-(naphthalen-2-yl)allyl chloride as the alkylating reagent. Highly regioselective reaction conditions, which differ for each regioisomer in a used base, gave the monosubstituted isomers in yields between 12-19%. Supramolecular properties of these derivatives were studied by DLS, ITC, NMR, and Cryo-TEM.

Glucose-Responsive Hybrid Nanoassemblies in Aqueous Solutions: Ordered Phenylboronic Acid within Intermixed Poly(4-hydroxystyrene)-block-poly(ethylene oxide) Block Copolymer.

Coassembly behavior of the double hydrophilic block copolymer poly(4-hydroxystyrene)-block-poly(ethylene oxide) (PHOS-PEO) with three amphiphilic phenylboronic acids (PBA) differing in hydrophobicity, 4-dodecyloxyphenylboronic acid (C12), 4-octyloxyphenylboronic acid (C8), and 4-isobutoxyphenylboronic acid (i-Bu) was studied in alkaline aqueous solutions and in mixtures of NaOHaq/THF by spin-echo (1)H NMR spectroscopy, dynamic and electrophoretic light scattering, and SAXS. The study reveals that only the coassembly of C12 with PHOS-PEO provides spherical nanoparticles with intermixed PHOS and PEO blocks, containing densely packed C12 micelles. NMR measurements have shown that spatial proximity of PHOS-PEO and C12 leads to the formation of ester bonds between -OH of PHOS block and hydroxyl groups of -B(OH)2. Due to the presence of PBA moieties, the release of compounds with 1,2- or 1,3-dihydroxy groups loaded in the coassembled PHOS-PEO/PBA nanoparticles by covalent binding to PBA can be triggered by addition of a surplus of glucose that bind to PBA competitively. The latter feature has been confirmed by fluorescence measurements using Alizarin Red as a model compound. Nanoparticles were proved to exhibit swelling in response to glucose as detected by light scattering.

A simple Fourier filter for suppression of the missing wedge ray artefacts in single-axis electron tomographic reconstructions.

The limited specimen tilting range that is typically available in electron tomography gives rise to a region in the Fourier space of the reconstructed object where experimental data are unavailable - the missing wedge. Since this region is sharply delimited from the area of available data, the reconstructed signal is typically hampered by convolution with its impulse response, which gives rise to the well-known missing wedge artefacts in 3D reconstructions. Despite the recent progress in the field of reconstruction and regularization techniques, the missing wedge artefacts remain untreated in most current reconstruction workflows in structural biology. Therefore we have designed a simple Fourier angular filter that effectively suppresses the ray artefacts in the single-axis tilting projection acquisition scheme, making single-axis tomographic reconstructions easier to interpret in particular at low signal-to-noise ratio in acquired projections. The proposed filter can be easily incorporated into current electron tomographic reconstruction schemes.

Temporal variation in the spectrum and concentration of airborne microalgae and cyanobacteria in the urban environments of inland temperate climate.

Despite their non-negligible representation among the airborne bioparticles and known allergenicity, autotrophic microorganisms-microalgae and cyanobacteria-are not commonly reported or studied by aerobiological monitoring stations due to the challenging identification in their desiccated and fragmented state. Using a gravimetric method with open plates at the same time as Hirst-type volumetric bioparticle sampler, we were able to cultivate the autotrophic microorganisms and use it as a reference for correct retrospective identification of the microalgae and cyanobacteria captured by the volumetric trap. Only in this way, reliable data on their presence in the air of a given area can be obtained and analysed with regard to their temporal variation and environmental factors. We gained these data for an inland temperate region over 3 years (2018, 2020-2021), identifying the microalgal genera Bracteacoccus, Desmococcus, Geminella, Chlorella, Klebsormidium, and Stichococcus (Chlorophyta) and cyanobacterium Nostoc in the volumetric trap samples and three more in the cultivated samples. The mean annual concentration recorded over 3 years was 19,182 cells*day/m3, with the greatest contribution from the genus Bracteacoccus (57%). Unlike some other bioparticles like pollen grains, autotrophic microorganisms were present in the samples over the course of the whole year, with greatest abundance in February and April. The peak daily concentration reached the highest value (1011 cells/m3) in 2021, while the mean daily concentration during the three analysed years was 56 cells/m3. The analysis of intra-diurnal patterns showed their increased presence in daylight hours, with a peak between 2 and 4 p.m. for most genera, which is especially important due to their potential to trigger allergy symptoms. From the environmental factors, wind speed had a most significant positive association with their concentration, while relative air humidity had a negative influence.

Impact of non-ionizable lipids and phase mixing methods on structural properties of lipid nanoparticle formulations.

Lipid nanoparticles (LNPs) have been widely investigated for nucleic acid therapeutic delivery, and demonstrated their potential in enabling new mRNA vaccines. LNPs are usually formulated with multi-lipid components and the composition variables may impact their structural properties. Here, we investigated the impact of helper lipids on physicochemical properties of LNPs using a Design of Experiments (DoE) definitive screening design. Phospholipid head group, degree of unsaturation, ratio to cholesterol as well as PEG-lipid content were varied and a series of 14 LNPs were prepared by microfluidic- and solvent-injection mixing. Solvent-injection mixing by a robotic liquid handler yielded 50-225 nm nanoparticles with highly ordered, ∼5 nm inter-lamellar spacing as measured by small angle X-ray scattering (SAXS) and confirmed by cryo-transmission electron microscopy (cryo-EM). In contrast, microfluidic mixing resulted in less ordered, notably smaller (50-75 nm) and more homogenous nanoparticles. Significant impacts of the stealth-lipid DSPE-PEG2000 on nanoparticle size, polydispersity and encapsulation efficiency of an oligonucleotide cargo were observed in LNPs produced by both methods, while varying the phospholipid type and content had only marginal effect on these physicochemical properties. These findings suggest that from a physicochemical perspective, the design space for combinations of helper lipids in LNPs may be considerably larger than anticipated based on the conservative formulation composition of the currently FDA-approved LNPs, thereby opening opportunities for screening and optimization of novel LNP formulations.

Replication timing of pseudo-NORs.

In mammalian cells, transcriptionally active ribosomal genes are replicated in the early S phase, and the silent ribosomal genes in the late S phase, though mechanisms of this timing remain unknown. UBF (Upstream Binding Factor), a DNA binding protein and component of the pol I transcription machinery, is considered to be responsible for the loose chromatin structure of the active rDNA. Here we question whether such structure alone can ensure early replication of DNA. We investigate this problem on the model of pseudo-NORs, the tandem arrays of heterologous DNA sequence with high affinity for UBF, introduced into human chromosomes. Such arrays are not transcribed, yet efficiently bind UBF and mimic the chromatin structure of active rDNA. In our study, a human derived stable cell line containing one pseudo-NOR on the chromosome 10 was transiently transfected with UBF-GFP and PCNA-RFP, which allowed us to observe in vivo the growth of pseudo-NORs resulted from their replication. We found that replication of pseudo-NORs is not restricted to the early S phase, but continues in the late S phase at a significant level. These results were confirmed in the experiments with incorporation of thymidin analog EdU and BrdU ChIP assay. Similar results were obtained with another cell line containing pseudo-NOR on the chromosome 7. Our data indicate that the specific loose structure of chromatin, produced by the architect protein UBF, is not sufficient for the early replication.

New insights on the structure of alpha-synuclein fibrils using cryo-electron microscopy.

Fibrils of alpha-synuclein are significant components of cellular inclusions associated with several neuropathological disorders including Parkinson's disease, multiple system atrophy and dementia with Lewy bodies. In recent years, technological advances in the field of transmission electron microscopy and image processing have made it possible to solve the structure of alpha-synuclein fibrils at high resolution. This review discusses the results of structural studies using cryo-electron microscopy, which revealed that in-vitro produced fibrils vary in diameter from 5nm for single-protofilament fibrils, to 10nm for two-protofilament fibrils. In addition, the atomic models hint at contributions of the familial Parkinson's disease mutation sites to inter-protofilament interaction and the locations where post-translational modifications take place. Here, we propose a nomenclature system that allows identifying the existing alpha-synuclein polymorphs and that will allow to incorporate additional high-resolution structures determined in the future.

A helical inner scaffold provides a structural basis for centriole cohesion.

The ninefold radial arrangement of microtubule triplets (MTTs) is the hallmark of the centriole, a conserved organelle crucial for the formation of centrosomes and cilia. Although strong cohesion between MTTs is critical to resist forces applied by ciliary beating and the mitotic spindle, how the centriole maintains its structural integrity is not known. Using cryo-electron tomography and subtomogram averaging of centrioles from four evolutionarily distant species, we found that MTTs are bound together by a helical inner scaffold covering ~70% of the centriole length that maintains MTTs cohesion under compressive forces. Ultrastructure Expansion Microscopy (U-ExM) indicated that POC5, POC1B, FAM161A, and Centrin-2 localize to the scaffold structure along the inner wall of the centriole MTTs. Moreover, we established that these four proteins interact with each other to form a complex that binds microtubules. Together, our results provide a structural and molecular basis for centriole cohesion and geometry.

Electron tomography of structures in the wall of hazel pollen grains.

The three-dimensional structure of channels and bacula cavities in the wall of hazel pollen grains was investigated by automated electron tomography in order to explore their role in the release of allergen proteins from the pollen grains. 3D reconstructions of 100-150 nm thick resin-embedded sections, stabilized by thin platinum-carbon coating, revealed that the channels aimed directly towards the surface of the grain and that the bacula cavities were randomly sized and merged into larger ensembles. The number and the dimensions of the ensembles were quantitatively determined by neighboring voxel analysis on thresholded reconstructed volumes. To simulate the allergen release, allergen proteins were approximated by a hard sphere model of a diameter corresponding to the largest dimension of the known 3D structure of the major birch allergen, Bet v 1, whose amino acid sequence is highly similar to the amino acid sequence of the major hazel allergen, Cor a 1. The analysis of positions where the hard sphere fits into the resolved channels and bacula cavity structures revealed that unbound allergens could freely traverse through the channels and that the bacula cavities support the path of the allergens towards the surface of the grain.

Cryo-EM structure of phosphodiesterase 6 reveals insights into the allosteric regulation of type I phosphodiesterases.

Cyclic nucleotide phosphodiesterases (PDEs) work in conjunction with adenylate/guanylate cyclases to regulate the key second messengers of G protein-coupled receptor signaling. Previous attempts to determine the full-length structure of PDE family members at high-resolution have been hindered by structural flexibility, especially in their linker regions and N- and C-terminal ends. Therefore, most structure-activity relationship studies have so far focused on truncated and conserved catalytic domains rather than the regulatory domains that allosterically govern the activity of most PDEs. Here, we used single-particle cryo-electron microscopy to determine the structure of the full-length PDE6αß2γ complex. The final density map resolved at 3.4 Å reveals several previously unseen structural features, including a coiled N-terminal domain and the interface of PDE6γ subunits with the PDE6αß heterodimer. Comparison of the PDE6αß2γ complex with the closed state of PDE2A sheds light on the conformational changes associated with the allosteric activation of type I PDEs.

Asymmetrical distribution of the transcriptionally competent NORs in mitosis.

Ribosomal genes are organized in clusters termed Nucleolus Organizer Regions (NORs). Essential components of the RNA polymerase I transcription machinery, including Upstream Binding Factor (UBF), can be detected on some NORs during mitosis; these NORs, termed competent, are believed to be transcriptionally active during interphase. In cultured mammalian cycling cells, the number of competent NORs, and their distribution among the different chromosomes, does not vary significantly in the sequential cell cycles. In this work we investigate whether this stable state is achieved by equal distribution of competent NORs during cell division. To answer this question we first studied the state of NORs in telophase HeLa and LEP cells. In both cell lines we found a small but significant difference between the emerging daughter cells in the number of UBF-loaded NORs. To reveal the cause of this difference, we followed the fate of individual NOR using HeLa derived cell line stably expressing UBF-GFP. We demonstrated that some NORs in metaphase are "asymmetrical", i.e. they lack the signal of competence on one of the sister chromatids. Regular presence of such NORs can account for the difference in the number of competent NORs obtained by the daughter cells emerging in mitosis.

Molecular Insight into Drug-Loading Capacity of PEG-PLGA Nanoparticles for Itraconazole.

Nanoparticles made of amphiphilic block copolymers comprising biodegradable core-forming blocks are very attractive for the preparation of drug-delivery systems with sustained release. Their therapeutic applications are, however, hindered by low values of the drug-loading content (DLC). The compatibility between the drug and the core-forming block of the copolymer is considered the most important factor affecting the DLC value. However, the molecular picture of the hydrophobic drug-copolymer interaction is still not fully recognized. Herein, we examined this complex issue using a range of experimental techniques in combination with atomistic molecular dynamics simulations. We performed an analysis of the interaction between itraconazole, a model hydrophobic drug, and a poly(ethylene glycol)-poly(lactide- co-glycolide) (PEG-PLGA) copolymer, a biodegradable copolymer commonly used for the preparation of drug-delivery systems. Our results clearly show that the limited capacity of the PEG-PLGA nanoparticles for the accumulation of hydrophobic drugs is due to the fact that the drug molecules are located only at the water-polymer interface, whereas the interior of the PLGA core remains empty. These findings can be useful in the rational design and development of amphiphilic copolymer-based drug-delivery systems.