Genesis of Active Pt/CeO2 Catalyst for Dry Reforming of Methane by Reduction and Aggregation of Isolated Platinum Atoms into Clusters.

Atomically dispersed metal catalysts offer the advantages of efficient metal utilization and high selectivities for reactions of technological importance. Such catalysts have been suggested to be strong candidates for dry reforming of methane (DRM), offering prospects of high selectivity for synthesis gas without coke formation, which requires ensembles of metal sites and is a challenge to overcome in DRM catalysis. However, investigations of the structures of isolated metal sites on metal oxide supports under DRM conditions are lacking, and the catalytically active sites remain undetermined. Data characterizing the DRM reaction-driven structural evolution of a cerium oxide-supported catalyst, initially incorporating atomically dispersed platinum, and the corresponding changes in catalyst performance are reported. X-ray absorption and infrared spectra show that the reduction and agglomeration of isolated cationic platinum atoms to form small platinum clusters/nanoparticles are necessary for DRM activity. Density functional theory calculations of the energy barriers for methane dissociation on atomically dispersed platinum and on platinum clusters support these observations. The results emphasize the need for in-operando experiments to assess the active sites in such catalysts. The inferences about the catalytically active species are suggested to pertain to a broad class of catalytic conversions involving the rate-limiting dissociation of light alkanes.

Structural and Electronic Effects at the Interface between Transition Metal Dichalcogenide Monolayers (MoS2, WSe2, and Their Lateral Heterojunctions) and Liquid Water.

Transition metal dichalcogenides (TMDCs) can be used as optical energy conversion materials to catalyze the water splitting reaction. A good catalytical performance requires: (i) well-matched semiconductor bandgaps and water redox potential for fluent energy transfer; and (ii) optimal orientation of the water molecules at the interface for kinetically fast chemical reactions. Interactions at the solid-liquid interface can have an important impact on these two factors; most theoretical studies have employed semiconductor-in-vacuum models. In this work, we explored the interface formed by liquid water and different types of TMDCs monolayers (MoS2, WSe2, and their lateral heterojunctions), using a combined molecular dynamics (MD) and density functional theory (DFT) approach. The strong interactions between water and these semiconductors confined the adsorbed water layer presenting structural patterns, with the water molecules well connected to the bulk water through the hydrogen bonding network. Structural fluctuations in the metal chalcogenide bonds during the MD simulations resulted in a 0.2 eV reduction of the band gap of the TMDCs. The results suggest that when designing new TMDC semiconductors, both the surface hydrophobicity and the variation of the bandgaps originating from the water-semiconductor interface, need to be considered.

Solution processable metal-organic frameworks for mixed matrix membranes using porous liquids.

The combination of well-defined molecular cavities and chemical functionality makes crystalline porous solids attractive for a great number of technological applications, from catalysis to gas separation. However, in contrast to other widely applied synthetic solids such as polymers, the lack of processability of crystalline extended solids hampers their application. In this work, we demonstrate that metal-organic frameworks, a type of highly crystalline porous solid, can be made solution processable via outer surface functionalization using N-heterocyclic carbene ligands. Selective outer surface functionalization of relatively large nanoparticles (250 nm) of the well-known zeolitic imidazolate framework ZIF-67 allows for the stabilization of processable dispersions exhibiting permanent porosity. The resulting type III porous liquids can either be directly deployed as liquid adsorbents or be co-processed with state-of-the-art polymers to yield highly loaded mixed matrix membranes with excellent mechanical properties and an outstanding performance in the challenging separation of propylene from propane. We anticipate that this approach can be extended to other metal-organic frameworks and other applications.

[Ag9(1,2-BDT)6]3-: How Square-Pyramidal Building Blocks Self-Assemble into the Smallest Silver Nanocluster.

The emerging promise of few-atom metal catalysts has driven the need for developing metal nanoclusters (NCs) with ultrasmall core size. However, the preparation of metal NCs with single-digit metallic atoms and atomic precision is a major challenge for materials chemists, particularly for Ag, where the structure of such NCs remains unknown. In this study, we developed a shape-controlled synthesis strategy based on an isomeric dithiol ligand to yield the smallest crystallized Ag NC to date: [Ag9(1,2-BDT)6]3- (1,2-BDT = 1,2-benzenedithiolate). The NC's crystal structure reveals the self-assembly of two Ag square pyramids through preferential pyramidal vertex sharing of a single metallic Ag atom, while all other Ag atoms are incorporated in a motif with thiolate ligands, resulting in an elongated body-centered Ag9 skeleton. Steric hindrance and arrangement of the dithiolated ligands on the surface favor the formation of an anisotropic shape. Time-dependent density functional theory based calculations reproduce the experimental optical absorption features and identify the molecular orbitals responsible for the electronic transitions. Our findings will open new avenues for the design of novel single-digit metal NCs with directional self-assembled building blocks.

Doping-Induced Anisotropic Self-Assembly of Silver Icosahedra in [Pt2Ag23Cl7(PPh3)10] Nanoclusters.

Atomically precise self-assembled architectures of noble metals with unique surface structures are necessary for prospective applications. However, the synthesis of such structures based on silver is challenging because of their instability. In this work, by developing a selective and controlled doping strategy, we synthesized and characterized a rod-shaped, charge-neutral, diplatinum-doped Ag nanocluster (NC) of [Pt2Ag23Cl7(PPh3)10]. Its crystal structure revealed the self-assembly of two Pt-centered Ag icosahedra through vertex sharing. Five bridging and two terminal chlorides and 10 PPh3 ligands were found to stabilize the cluster. Electronic structure simulations corroborated structural and optical characterization of the cluster and provided insights into the effect of the Pt dopants on the optical properties and stability of the cluster. Our study will open new avenues for designing novel self-assembled NCs using different elemental dopants.

Counting electrons on supported nanoparticles.

Electronic interactions between metal nanoparticles and oxide supports control the functionality of nanomaterials, for example, the stability, the activity and the selectivity of catalysts. Such interactions involve electron transfer across the metal/support interface. In this work we quantify this charge transfer on a well-defined platinum/ceria catalyst at particle sizes relevant for heterogeneous catalysis. Combining synchrotron-radiation photoelectron spectroscopy, scanning tunnelling microscopy and density functional calculations we show that the charge transfer per Pt atom is largest for Pt particles of around 50 atoms. Here, approximately one electron is transferred per ten Pt atoms from the nanoparticle to the support. For larger particles, the charge transfer reaches its intrinsic limit set by the support. For smaller particles, charge transfer is partially suppressed by nucleation at defects. These mechanistic and quantitative insights into charge transfer will help to make better use of particle size effects and electronic metal-support interactions in metal/oxide nanomaterials.

Approaching complexity of alkyl hydrogenation on Pd via density-functional modelling.

Pd is widely used to catalyse hydrogenation and dehydrogenation reactions. One of them is the hydrogenation of ethylene, which includes the transformation of ethyl species to ethane. Herein, by means of density-functional calculations we address several still insufficiently understood factors affecting the latter process. In particular, we shed light on the following aspects of hydrogenation of alkyls on Pd: (i) the mechanistic details of how subsurface H accelerates the reaction on a (111) surface; (ii) the role of nanoparticle edges; and (iii) the influence of a common spectator ethylidyne, [triple bond, length as m-dash]C-CH3. These factors are identified as significant for the height of the ethyl hydrogenation barrier on Pd. Moreover, we show that butyl hydrogenation on Pd is also governed by very similar interactions, which suggests a broader applicability of our conclusions. This study highlights the complexity of alkyl hydrogenation and analyses the factors that need to be taken into account for a more realistic description of the hydrogenation processes on metal surfaces.

Revealing chemical ordering in Pt-Co nanoparticles using electronic structure calculations and X-ray photoelectron spectroscopy.

The high catalytic activity of Pt-Co nanoalloys in oxygen reduction and other reactions is usually attributed to their Pt-rich surfaces. However, identification of the precise near-surface structure is by no means easily achievable experimentally. In this work we systematically analyzed the chemical ordering and surface composition of PtXCo(79-X) and PtXCo(140-X) bimetallic nanoparticles by means of a recently developed method based on topological energy expressions and electronic structure calculations. Pt is found to segregate on the surface, especially on corner and edge sites, forming a one atomic layer thick skin independent of the size and composition of the nanoparticle. In turn, the subsurface shell of the particle is composed mostly of Co, whereas the core area has a mixed composition, which depends on the overall stoichiometry. The formation of an outer Pt shell is corroborated by thoroughly analyzed data of X-ray photoelectron spectroscopy experiments performed with various photon energies on annealed Pt-Co particles prepared in vacuum by magnetron sputtering. The core-shell structure of Pt-Co particles is calculated to be more stable than the respective L10 structure. The obtained topological energy expressions are shown to depend only very moderately on the nanoparticle size, which allowed us to apply them to determine the ordering in ∼4 nm big PtXCo(1463-X) species. The presented results deepen our understanding of the intrinsic structure of Pt-Co nanoparticles depending on their size and composition.

O vacancies on steps on the CeO2(111) surface.

Cerium dioxide is a compound important for heterogeneous catalysis, energy technologies, biomedical applications, etc. One of its most remarkable properties is low O vacancy (Ovac) formation energy Ef. Nanostructuring of ceria was shown to decrease Ef and to make the oxide material more active in oxidative reactions. Here we investigate computationally formation of Ovac on CeO2(111) surfaces nanostructured by steps with experimentally observed structures. To facilitate the search for Ovac + 2Ce(3+) configurations that yield the lowest Ef values we proposed and employed an efficient computational scheme where DFT + U calculations were preceded by a pre-screening procedure based on the results of plain DFT calculations. Ef values on the steps were calculated to be up to 0.7 eV lower than on a regular CeO2(111) surface. Some energetically stable Ovac + 2Ce(3+) configurations were found to include subsurface Ce(3+) ions. The present results quantify to what extent the roughness of the CeO2(111) surface affects its reducibility.

How absorbed hydrogen affects the catalytic activity of transition metals.

Heterogeneous catalysis is commonly governed by surface active sites. Yet, areas just below the surface can also influence catalytic activity, for instance, when fragmentation products of catalytic feeds penetrate into catalysts. In particular, H absorbed below the surface is required for certain hydrogenation reactions on metals. Herein, we show that a sufficient concentration of subsurface hydrogen, H(sub) , may either significantly increase or decrease the bond energy and the reactivity of the adsorbed hydrogen, H(ad) , depending on the metal. We predict a representative reaction, ethyl hydrogenation, to speed up on Pd and Pt, but to slow down on Ni and Rh in the presence of H(sub) , especially on metal nanoparticles. The identified effects of subsurface H on surface reactivity are indispensable for an atomistic understanding of hydrogenation processes on transition metals and interactions of hydrogen with metals in general.

Effect of MgO(100) support on structure and properties of Pd and Pt nanoparticles with 49-155 atoms.

Presently, density functional computational studies of nanostructures in heterogeneous catalysts consider either sufficiently big ("scalable with size") unsupported metal nanoparticles (NPs) or small supported metal clusters. Both models may not be sufficiently representative of a few nm in size supported transition metal NPs dealt with in experiment. As a first step in closing the gap between theoretical models and prepared systems, we investigate the effect of a rather chemically inert oxide support, MgO(100), on relative energies and various properties of Pd and Pt NPs that consist of 49-155 atoms (1.2-1.6 nm in size) and exhibit bulk-like fcc structural arrangements. Shapes and interface configurations of metal NPs on MgO were obtained as a result of thorough optimization within the fcc motif using interatomic potentials. Then the stability and properties of the NPs were studied with a density functional method. We comprehensively characterize interaction between the NPs and MgO(100) support, their interface and effect of the support on NP properties. While the effect of MgO on relative stabilities of NPs with different shapes is found to be significant, other properties of the NPs such as electronic structure and interatomic distances within NP do not notably change upon deposition. This work paves the way to large-scale first-principles computational studies of more realistic models of oxide-supported metal catalysts.

Theoretical assessment of graphene-metal contacts.

Graphene-metal contacts have emerged as systems of paramount importance in the synthesis of high-quality and large-size patches of graphene and as vital components of nanotechnological devices. Herein, we study the accuracy of several density functional theory methods using van der Waals functionals or dispersive forces corrections when describing the attachment of graphene on Ni(111). Two different experimentally observed chemisorption states, top-fcc and bridge-top, were put under examination, together with the hcp-fcc physisorption state. Calculated geometric, energetic, and electronic properties were compared to experimental data. From the calculations, one finds that (i) predictions made by different methodologies differ significantly and (ii) optB86b-vdW functional and Grimme dispersion correction seem to provide the best balanced description of stability of physisorption and chemisorption states, the attachment strength of the latter on Ni(111) surface, the graphene-Ni(111) separation, and the bandstructure of chemisorbed graphene. The collation suggests that accurate and affordable theoretical studies on technologies based on graphene-metal contacts are already at hand.

Strained few-layer MoS2 with atomic copper and selectively exposed in-plane sulfur vacancies for CO2 hydrogenation to methanol.

In-plane sulfur vacancies (Sv) in molybdenum disulfide (MoS2) were newly unveiled for CO2 hydrogenation to methanol, whereas edge Sv were found to facilitate methane formation. Thus, selective exposure and activation of basal plane is crucial for methanol synthesis. Here, we report a mesoporous silica-encapsulated MoS2 catalysts with fullerene-like structure and atomic copper (Cu/MoS2@SiO2). The main approach is based on a physically constrained topologic conversion of molybdenum dioxide (MoO2) to MoS2 within silica. The spherical curvature enables the generation of strain and Sv in inert basal plane. More importantly, fullerene-like structure of few-layer MoS2 can selectively expose in-plane Sv and reduce the exposure of edge Sv. After promotion by atomic copper, the resultant Cu/MoS2@SiO2 exhibits stable specific methanol yield of 6.11 molMeOH molMo-1 h-1 with methanol selectivity of 72.5% at 260 °C, much superior to its counterparts lacking the fullerene-like structure and copper decoration. The reaction mechanism and promoting role of copper are investigated by in-situ DRIFTS and in-situ XAS. Theoretical calculations demonstrate that the compressive strain facilitates Sv formation and CO2 hydrogenation, while tensile strain accelerates the regeneration of active sites, rationalizing the critical role of strain.

Interaction of Gallium with a Copper Surface: Surface Alloying and Formation of Ordered Structures.

Alloys of gallium with transition metals have recently received considerable attention for their applications in microelectronics and catalysis. Here, we investigated the initial stages of the Ga-Cu alloy formation on Cu(111) and Cu(001) surfaces using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and low energy electron diffraction (LEED). The results show that Ga atoms deposited using physical vapor deposition readily intermix with the Cu surface, leading to a random distribution of the Ga and Cu atoms within the surface layer, on both terraces and monolayer-thick islands formed thereon. However, as the Ga coverage increases, several ordered structures are formed. The (√3×√3)R30° structure is found to be thermodynamically most stable on Cu(111). This structure remains after vacuum annealing at 600 K, independent of the initial Ga coverage (varied between 0.5 and 3 monolayers), indicating a self-limited growth of the Ga-Cu alloy layer, with the rest of the Ga atoms migrating into the Cu crystal. For Ga deposited on Cu(001), we observed a (1 × 5)-reconstructed surface, which has never been observed for surface alloys on Cu(001). The experimental findings were rationalized on the basis of density functional theory (DFT) calculations, which provided structural models for the most stable surface Ga-Cu alloys on Cu(111) and Cu(001). The study sheds light on the complex interaction of Ga with transition metal surfaces and the interfaces formed thereon that will aid in a better understanding of surface alloying and chemical reactions on the Ga-based alloys.

Engineering nanoscale H supply chain to accelerate methanol synthesis on ZnZrOx.

Metal promotion is the most widely adopted strategy for enhancing the hydrogenation functionality of an oxide catalyst. Typically, metal nanoparticles or dopants are located directly on the catalyst surface to create interfacial synergy with active sites on the oxide, but the enhancement effect may be compromised by insufficient hydrogen delivery to these sites. Here, we introduce a strategy to promote a ZnZrOx methanol synthesis catalyst by incorporating hydrogen activation and delivery functions through optimized integration of ZnZrOx and Pd supported on carbon nanotube (Pd/CNT). The CNT in the Pd/CNT + ZnZrOx system delivers hydrogen activated on Pd to a broad area on the ZnZrOx surface, with an enhancement factor of 10 compared to the conventional Pd-promoted ZnZrOx catalyst, which only transfers hydrogen to Pd-adjacent sites. In CO2 hydrogenation to methanol, Pd/CNT + ZnZrOx exhibits drastically boosted activity-the highest among reported ZnZrOx-based catalysts-and excellent stability over 600 h on stream test, showing potential for practical implementation.

Diversity of platinum-sites at platinum/fullerene interface accelerates alkaline hydrogen evolution.

Membrane-based alkaline water electrolyser is promising for cost-effective green hydrogen production. One of its key technological obstacles is the development of active catalyst-materials for alkaline hydrogen-evolution-reaction (HER). Here, we show that the activity of platinum towards alkaline HER can be significantly enhanced by anchoring platinum-clusters onto two-dimensional fullerene nanosheets. The unusually large lattice distance (~0.8 nm) of the fullerene nanosheets and the ultra-small size of the platinum-clusters (~2 nm) leads to strong confinement of platinum clusters accompanied by pronounced charge redistributions at the intimate platinum/fullerene interface. As a result, the platinum-fullerene composite exhibits 12 times higher intrinsic activity for alkaline HER than the state-of-the-art platinum/carbon black catalyst. Detailed kinetic and computational investigations revealed the origin of the enhanced activity to be the diverse binding properties of the platinum-sites at the interface of platinum/fullerene, which generates highly active sites for all elementary steps in alkaline HER, particularly the sluggish Volmer step. Furthermore, encouraging energy efficiency of 74% and stability were achieved for alkaline water electrolyser assembled using platinum-fullerene composite under industrially relevant testing conditions.

Stereoisomerization during Molecular Packing.

Isomerization is an essential chemical process that often evokes dramatic change of chemical, physical, or biological properties. For a long time, isomerization has been known as a transformation that is induced by certain external energy such as light, heat, or mechanical force. Herein, a new isomerization phenomenon is described, which does not require external energy but simply occurs during molecular packing. The proposed isomerization is demonstrated by a series of symmetric donor-acceptor-donor (D-A-D) molecules, the donor of which may adopt two different stereoisomeric forms. Based on the evidence of the asymmetric isomers in crystals, the occurrence of isomerization during molecular packing is proved. Moreover, the unique asymmetric geometry in the solid state favors the restriction of intramolecular motion, resulting in highly efficient organic solids with quantum yields approaching unity.

Synthesis of Mesoporous Copper Aluminosilicate Hollow Spheres for Oxidation Reactions.

Hollow functional metal silicate materials have received the most interest due to their large inner space, permeable and functional shell, lighter density, and better use of material compared to their solid counterparts. While tremendous success has been made in the synthesis of individual metal silicates with uniform morphology, the synthesis of multiphase hollow silicates has not been explored yet, although their direct applications could be promising. In this study, mesoporous aluminosilicate spheres (MASS) are transformed to submicrometer copper aluminosilicate hollow spheres (CASHS) via a one-pot hydrothermal process. CASHS has a hollow interior with Cu-Al-Si thorn-like moieties in a lamellar structure on its outer shell. The structure and morphology of CASHS are unique and different from the previously reported tubular copper silicates that are emanated from Stöber silica spheres. Herein, we also demonstrate that the extent of hollowing in CASHS can be attained by controlling the aluminum content of pristine MASS, highlighting the existence of parameters for in situ controlling the shell thickness of hollow materials. The application of CASHS as a potential heterogeneous catalyst has been directed to important oxidation processes such as olefin oxidation and the advanced oxidation process (AOP). In cyclohexene oxidation, for instance, high selectivity to cyclohex-2-en-1-one is achieved under moderate conditions using tert-butyl hydroperoxide as the oxidant. CASHS is a robust heterogeneous catalyst and recyclable for this reaction. CASHS-derived catalysts also favor AOP and enhance the removal of cationic dyes together with H2O2 through an adsorption-degradation process.

Hydration-Effect-Promoting Ni-Fe Oxyhydroxide Catalysts for Neutral Water Oxidation.

Oxygen evolution reaction (OER) catalysts that function efficiently in pH-neutral electrolyte are of interest for biohybrid fuel and chemical production. The low concentration of reactant in neutral electrolyte mandates that OER catalysts provide both the water adsorption and dissociation steps. Here it is shown, using density functional theory simulations, that the addition of hydrated metal cations into a Ni-Fe framework contributes water adsorption functionality proximate to the active sites. Hydration-effect-promoting (HEP) metal cations such as Mg2+ and hydration-effect-limiting Ba2+ into Ni-Fe frameworks using a room-temperature sol-gel process are incorporated. The Ni-Fe-Mg catalysts exhibit an overpotential of 310 mV at 10 mA cm-2 in pH-neutral electrolytes and thus outperform iridium oxide (IrO2 ) electrocatalyst by a margin of 40 mV. The catalysts are stable over 900 h of continuous operation. Experimental studies and computational simulations reveal that HEP catalysts favor the molecular adsorption of water and its dissociation in pH-neutral electrolyte, indicating a strategy to enhance OER catalytic activity.