Human trabecular meshwork cell behavior is influenced by collagen scaffold pore architecture and glycosaminoglycan composition.

Glaucoma is a degenerative eye disease in which damage to the optic nerve leads to a characteristic loss of vision. The primary risk factor for glaucoma is an increased intraocular pressure that is caused by an imbalance of aqueous humor generation and subsequent drainage through the trabecular meshwork (TM) drainage system. The small size, donor tissue limitations, and high complexity of the TM make it difficult to research the relationship between the TM cells and their immediate environment. Thus, a biomaterial-based approach may be more appropriate for research manipulations and in vitro drug development platforms. In this work, human TM (hTM) cells were cultured on various collagen scaffolds containing different glycosaminoglycans (GAGs) and different pore architectures to better understand how hTM cells respond to changes in their extracellular environment. Cellular response was measured by quantifying cellular proliferation and expression of an important extracellular matrix protein, fibronectin. The pore architecture of the scaffolds was altered using freeze-casting technique to make both large and small pores that were aligned or with a non-aligned random structure. The composition of the scaffolds was altered with the addition of chondroitin sulfate and/or hyaluronic acid. It was found that the hTM cells grown on large pore scaffolds proliferate more than those grown on small pores. There was an increase in the fibronectin expression with the incorporation of GAGs, and its morphology was changed by the underlying pore architecture. This work will help provide an insight into the behavior of hTM cells when introducing changes in their microenvironment.

Imaging and Analysis of Cellular Locations in Three-Dimensional Tissue Models.

The absence of quantitative in vitro cell-extracellular matrix models represents an important bottleneck for basic research and human health. Randomness of cellular distributions provides an opportunity for the development of a quantitative in vitro model. However, quantification of the randomness of random cell distributions is still lacking. In this paper, we have imaged cellular distributions in an alginate matrix using a multiview light sheet microscope and developed quantification metrics of randomness by modeling it as a Poisson process, a process that has constant probability of occurring in space or time. We imaged fluorescently labeled human mesenchymal stem cells embedded in an alginate matrix of thickness greater than 5 mm with axial resolution, the mean full width at half maximum of the axial intensity profiles of fluorescent particles. Simulated randomness agrees well with the experiments. Quantification of distributions and validation by simulations will enable quantitative study of cell-matrix interactions in tissue models.

Collagen and collagen-chondroitin sulfate scaffolds with uniaxially aligned pores for the biomimetic, three dimensional culture of trabecular meshwork cells.

Glaucoma is a disease in which damage to the optic nerve leads to progressive, irreversible vision loss. The intraocular pressure (IOP) is the only modifiable risk factor for glaucoma and its lowering is considered a useful strategy for preventing or slowing down the progression of glaucomatous neuropathy. Elevated intraocular pressure associated with glaucoma is due to increased aqueous humor outflow resistance, primarily through the trabecular meshwork (TM) of the eye. Current in vitro models of the trabecular meshwork are oversimplified and do not capture the organized and complex three-dimensional nature of this tissue that consists primarily of collagen and glycoasaminoglycans. In this work, collagen and collagen-chondroitin sulfate (CS) scaffolds were fabricated via unidirectional freezing and lyophilization to induce the formation of aligned pores. Scaffolds were characterized by scanning electron microscopy, dynamic mechanical analysis, and a chondroitin sulfate quantification assay. Scaffold characterization confirmed the formation of aligned pores, and also that the CS was leaching out of the scaffolds over time. Primary porcine trabecular meshwork (TM) cells were seeded onto the surface of scaffolds and their gene expression, proliferation, viability, migration into the scaffolds, and morphology were examined. The TM cells were viable and proliferated 2 weeks after seeding. The cells migrated down into the internal scaffold structure and their morphology reflected the topography and alignment of the scaffold structure. This work is a promising step toward the development of a three dimensional in vitro model of the TM that can be used for testing of glaucoma pharmacological agents in future experimentation and to better our understanding of the trabecular meshwork and its complex physiology. Biotechnol. Bioeng. 2017;114: 915-923. © 2016 Wiley Periodicals, Inc.

Comparative Study of Poly (ε-Caprolactone) and Poly(Lactic-co-Glycolic Acid) -Based Nanofiber Scaffolds for pH-Sensing.

PURPOSE: This study aims to develop biodegradable and biocompatible polymer-based nanofibers that continuously monitor pH within microenvironments of cultured cells in real-time. In the future, these fibers will provide a scaffold for tissue growth while simultaneously monitoring the extracellular environment. METHODS: Sensors to monitor pH were created by directly electrospinning the sensor components within a polymeric matrix. Specifically, the entire fiber structure is composed of the optical equivalent of an electrode, a pH-sensitive fluorophore, an ionic additive, a plasticizer, and a polymer to impart mechanical stability. The resulting poly(ε-caprolactone) (PCL) and poly(lactic-co-glycolic acid) (PLGA) based sensors were characterized by morphology, dynamic range, reversibility and stability. Since PCL-based nanofibers delivered the most desirable analytical response, this matrix was used for cellular studies. RESULTS: Electrospun nanofiber scaffolds (NFSs) were created directly out of optode material. The resulting NFS sensors respond to pH changes with a dynamic range centered at 7.8 ± 0.1 and 9.6 ± 0.2, for PCL and PLGA respectively. NFSs exhibited multiple cycles of reversibility with a lifetime of at least 15 days with preservation of response characteristics. By comparing the two NFSs, we found PCL-NFSs are more suitable for pH sensing due to their dynamic range and superior reversibility. CONCLUSION: The proposed sensing platform successfully exhibits a response to pH and compatibility with cultured cells. NSFs will be a useful tool for creating 3D cellular scaffolds that can monitor the cellular environment with applications in fields such as drug discovery and tissue engineering.

Understanding and overcoming shear alignment of fibers during extrusion.

Fiber alignment is the defining architectural characteristic of discontinuous fiber composites and is dictated by shear-dominated processing techniques including flow-injection molding, tape-casting, and mold-casting. However, recent colloidal assembly techniques have started to employ additional forces in fiber suspensions that have the potential to change the energy landscape of the shear-dominated alignment in conditions of flow. In this paper, we develop an energetics model to characterize the shear-alignment of rigid fibers under different flow conditions in the presence of magnetic colloidal alignment forces. We find that these colloidal forces can be sufficient to manipulate the energetic landscape and obtain tunable fiber alignment during flow within even small geometries, such as capillary flow. In most conditions, these colloidal forces work to freeze the fiber orientation during flow and prevent the structure disrupting phenomenon of Jeffrey's orbits that has been accepted to rule fiber suspensions under simple shear flow.

Cell-instructive biomaterials in tissue engineering and regenerative medicine.

The field of biomaterials aims to improve regenerative outcomes or scientific understanding for a wide range of tissue types and ailments. Biomaterials can be fabricated from natural or synthetic sources and display a plethora of mechanical, electrical, and geometrical properties dependent on their desired application. To date, most biomaterial systems designed for eventual translation to the clinic rely on soluble signaling moieties, such as growth factors, to elicit a specific cellular response. However, these soluble factors are often limited by high cost, convoluted synthesis, low stability, and difficulty in regulation, making the translation of these biomaterials systems to clinical or commercial applications a long and arduous process. In response to this, significant effort has been dedicated to researching cell-directive biomaterials which can signal for specific cell behavior in the absence of soluble factors. Cells of all tissue types have been shown to be innately in tune with their microenvironment, which is a biological phenomenon that can be exploited by researchers to design materials that direct cell behavior based on their intrinsic characteristics. This review will focus on recent developments in biomaterials that direct cell behavior using biomaterial properties such as charge, peptide presentation, and micro- or nano-geometry. These next generation biomaterials could offer significant strides in the development of clinically relevant medical devices which improve our understanding of the cellular microenvironment and enhance patient care in a variety of ailments.

Self-Initiated Photopolymerization of Anti-Inflammatory Zwitterionic Hydrogels with Sustained Release.

Hydrogels are three-dimensional networks of hydrophilic polymers that have garnered significant attention as wound-healing materials. Many synthetic hydrogels are fabricated using a radical polymerization approach that requires an initiator molecule that is often photo- or thermosensitive. Initiator-free hydrogels are an emerging area of research that focuses on hydrogel fabrication that occurs in the absence of an initiator or cross-linker molecule, making these hydrogels highly relevant in tissue engineering and regenerative medicine due to their excellent cytocompatibility and ease of scale-up. Here we present on the development of initiator-free zwitterionic hydrogels that photopolymerize without any initiator or cross-linker while under cytocompatible conditions. The hydrogels exhibit a wide range of mechanical characteristics that are dependent on their polymer composition. They resist nonspecific protein adsorption and exhibit a sustained release of proteins and small molecules. Additionally, these self-initiated hydrogels significantly mitigate inflammatory macrophage activation in vitro. Overall, the development of self-initiated photopolymerized zwitterionic hydrogels offers significant progress in the fields of biomaterials and materials science.

Three-dimensional electrospun alginate nanofiber mats via tailored charge repulsions.

The formation of 3D electrospun mat structures from alginate-polyethylene oxide (PEO) solution blends is reported. These unique architectures expand the capabilities of traditional electrospun mats for applications such as regenerative medicine, where a scaffold can help to promote tissue growth in three dimensions. The mat structures extend off the surface of the flat collector plate without the need of any modifications in the electrospinning apparatus, are self-supported when the electric field is removed, and are composed of bundles of nanofibers. A mechanism for the unique formations is proposed, based on the fiber-fiber repulsions from surface charges on the negatively charged alginate. Furthermore, the role of the electric field in the distribution of alginate within the nanofibers is discussed. X-ray photoelectron spectroscopy is used to analyze the surface composition of the electrospun nanofiber mats and the data is related to cast films made in the absence of the electric field. Further techniques to tailor the 3D architecture and nanofiber morphology by changing the surface tension and relative humidity are also discussed.

Biodegradable photo-crosslinked alginate nanofibre scaffolds with tuneable physical properties, cell adhesivity and growth factor release.

Nanofibrous scaffolds are of interest in tissue engineering due to their high surface area to volume ratio, interconnected pores, and architectural similarity to the native extracellular matrix. Our laboratory recently developed a biodegradable, photo-crosslinkable alginate biopolymer. Here, we show the capacity of the material to be electrospun into a nanofibrous matrix, and the ability to enhance cell adhesion and proliferation on these matrices by covalent modification with cell adhesion peptides. Additionally, the potential of covalently incorporating heparin into the hydrogels during the photopolymerisation process to sustain the release of a heparin binding growth factor via affinity interactions was demonstrated. Electrospun photo-crosslinkable alginate nanofibrous scaffolds endowed with cell adhesion ligands and controlled delivery of growth factors may allow for improved regulation of cell behaviour for regenerative medicine.

Glycosaminoglycans Influence Extracellular Matrix of Human Trabecular Meshwork Cells Cultured on 3D Scaffolds.

Glaucoma is a multifactorial progressive optic neuropathy characterized by the loss of retinal ganglion cells leading to irreversible blindness. It is the leading cause of global irreversible blindness and is currently affecting over 70 million people. Elevated intraocular pressure (IOP) is considered the only modifiable risk factor and is a target of numerous treatment modalities. Researchers have assigned this elevation of IOP to accumulation of extracellular matrix (ECM) components in the aqueous humor (AH) outflow pathway. The major drainage structure for AH outflow is the trabecular meshwork (TM). The ECM of the TM is important in regulating IOP in both normal and glaucomatous eyes. In this work, we have studied the role of exogeneous glycosaminoglycans (GAGs), glucocorticoids, and culture conditions on the expression of the ECM gene and proteins by human TM (hTM) cells cultured on biomaterial scaffolds. Gene and protein expression levels of elastin, laminin, and matrix metalloproteinase-2 (MMP-2) were evaluated using quantitative PCR and immunohistochemistry. Pressure gradient changes in cell-laden scaffolds in perfusion cultures were also monitored. Our findings show that GAGs and dexamethasone play an influencing role in hTM ECM turnover at both transcriptional and translational levels by altering expression levels of elastin, laminin, and MMP-2. Understanding the role of exogeneous factors on hTM cell behavior is helpful in gaining insights on glaucoma pathogenesis and ultimately pivotal in development of novel therapeutics against the disease.

Fabrication of Size-Controlled and Emulsion-Free Chitosan-Genipin Microgels for Tissue Engineering Applications.

Chitosan microgels are of significant interest in tissue engineering due to their wide range of applications, low cost, and immunogenicity. However, chitosan microgels are commonly fabricated using emulsion methods that require organic solvent rinses, which are toxic and harmful to the environment. The present protocol presents a rapid, non-cytotoxic, non-emulsion-based method for fabricating chitosan-genipin microgels without the need for organic solvent rinses. The microgels described herein can be fabricated with precise size control. They exhibit sustained release of biomolecules, making them highly relevant for tissue engineering, biomaterials, and regenerative medicine. Chitosan is crosslinked with genipin to form a hydrogel network, then passed through a syringe filter to produce the microgels. The microgels can be filtered to create a range of sizes, and they show pH-dependent swelling and degrade over time enzymatically. These microgels have been employed in a rat growth plate injury model and were demonstrated to promote increased cartilage tissue repair and to show complete degradation at 28 days in vivo. Due to their low cost, high convenience, and ease of fabrication with cytocompatible materials, these chitosan microgels present an exciting and unique technology in tissue engineering.

Polyelectrolyte Complex Hydrogels with Controlled Mechanics Affect Mesenchymal Stem Cell Differentiation Relevant to Growth Plate Injuries.

The growth plate is a complex cartilage structure in long bones that mediates growth in children. When injured, the formation of a "bony bar" can occur which impedes normal growth and can cause angular deformities or growth arrest. Current treatments for growth plate injuries are limited and result in poor patient outcomes, necessitating research toward novel treatments that can prevent bony bar formation and stimulate cartilage regeneration. This study investigates alginate-chitosan polyelectrolyte complex (PEC) hydrogels as an injectable biomaterial system to prevent bony bar formation. Biomaterial properties including stiffness and degradation are quantified, and the effect that material properties have on mesenchymal stem cell (MSC) fate is quantified in vitro. Specifically, this study aims to elucidate the effectiveness of biomaterial-based control over the differentiation behavior of MSCs toward osteogenic or chondrogenic lineages using biochemical metabolite assays and quantitative real time PCR. Further, the PEC hydrogels are employed in a rat growth plate injury model to determine their effectiveness in preventing bony bar formation in vivo. Results indicate that hydrogel composition and material properties affect the differentiation tendency of MSCs in vitro, and the PEC hydrogels show promise as an injectable biomaterial for growth plate injuries.

Topical gel-based biomaterials for the treatment of diabetic foot ulcers.

Diabetic foot ulcers (DFUs) are a devastating ailment for many diabetic patients with increasing prevalence and morbidity. The complex pathophysiology of DFU wound environments has made finding effective treatments difficult. Standard wound care treatments have limited efficacy in healing these types of chronic wounds. Topical biomaterial gels have been developed to implement novel treatment approaches to improve therapeutic effects and are advantageous due to their ease of application, tunability, and ability to improve therapeutic release characteristics. Here, we provide an updated, comprehensive review of novel topical biomaterial gels developed for treating chronic DFUs. This review will examine preclinical data for topical gel treatments in diabetic animal models and clinical applications, focusing on gels with protein/peptides, drug, cellular, herbal/antioxidant, and nano/microparticle approaches. STATEMENT OF SIGNIFICANCE: By 2050, 1 in 3 Americans will develop diabetes, and up to 34% of diabetic patients will develop a diabetic foot ulcer (DFU) in their lifetime. Current treatments for DFUs include debridement, infection control, maintaining a moist wound environment, and pressure offloading. Despite these interventions, a large number of DFUs fail to heal and are associated with a cost that exceeds $31 billion annually. Topical biomaterials have been developed to help target specific impairments associated with DFU with the goal to improve healing. A summary of these approaches is needed to help better understand the current state of the research. This review summarizes recent research and advances in topical biomaterials treatments for DFUs.

Photopolymerized Zwitterionic Hydrogels with a Sustained Delivery of Cerium Oxide Nanoparticle-miR146a Conjugate Accelerate Diabetic Wound Healing.

In the United States, $87 billion per year is spent on the care of diabetic ulcers alone. Although the pathophysiology of diabetic wound healing is multifaceted, high systemic levels of inflammation and increased reactive oxygen species are often implicated in the wound healing impairment. Zwitterionic materials have been demonstrated to reduce inflammation and increase extracellular matrix deposition in wound beds, and here, we demonstrate a fabrication method for photopolymerized zwitterionic hydrogels that also enables sustained drug delivery over time. A therapeutic molecule of interest that is examined in this work is cerium oxide nanoparticle tagged with microRNA-146a (CNP-miR146a) to combat both oxidative stress and inflammation. The hydrogels are composed of zwitterionic and nonzwitterionic monomers, and the hydrogel formation occurs in the absence of a crosslinker. The hydrogels exhibit a wide range of stiffness and mechanical properties depending on their monomer content. Additionally, these hydrogels exhibit sustained release of nanoparticles and proteins. Finally, when employed in an in vivo diabetic mouse wound healing model, the zwitterionic hydrogels alone and laden with the CNP-miR146a conjugate significantly improved the rate of diabetic wound healing. Overall, these materials have excellent potential to be used as a topical treatment for chronic diabetic wounds.

Localized, targeted, and sustained siRNA delivery.

Short interfering RNA (siRNA) functions directly in the cytoplasm, where it is assembled into an RNA-induced silencing complex (RISC). The localized delivery of siRNA to a specific site in vivo is highly challenging. There are many disease states in which a systemic effect of RNAi may be desirable; some examples include non-localized cancers, HIV, neurodegenerative diseases, respiratory viruses, and heart and vascular disease. In this Concept, we will focus on the localized delivery of siRNA to a target site using various delivery modalities. In certain tissues, such as the eye, central nervous system and lung, it has been demonstrated that a simple injection of naked siRNA will silence gene expression specifically in that tissue. To achieve local gene silencing in other tissues, a variety of approaches have been pursued to help stabilize the siRNA and facilitate uptake; they include chemical modification of the siRNA or complexation within liposomes or polymers to form nanoparticles. Recently, the use of macroscopic biomaterial scaffolds for siRNA delivery has been reported, and although there is still significant work to be done in this area to optimize the delivery systems, it is an important area of research that offers the potential for having great impact on the field of siRNA delivery.

Tunable chitosan-calcium phosphate composites as cell-instructive dental pulp capping agents.

Dental cavities are the most prevalent, preventable disease worldwide providing a need for robust treatment options to restore both the form and function of decaying teeth. Here is a presentation of a possible regenerative pulp capping agent that can serve to restore tooth function while regenerating healthy dentin tissue over a long period of time. To achieve this goal a material needs to crosslink quickly, be structurally rigid, and support the proliferation and differentiation of stem cells contained within the dental pulp. In this study, calcium phosphate nanoparticles were embedded in polymer hydrogels of carboxymethyl-chitosan and a diglycidyl ether. The particle size, surface, and mechanical properties of these materials were characterized. These composites have moduli up to 3 MPa, support the culture of dental pulp stem cells more than 3 weeks and exhibit osteogenic potential even without osteogenic media. These composites demonstrate a promising potential as the next generation of pulp capping materials.

Photoinduced Gelatin-Methacrylate Scaffolds to Examine the Impact of Extracellular Environment on Trabecular Meshwork Cells.

Glaucoma is the leading cause of irreversible blindness in the world, currently impacting 80 million people. Patients suffering from primary open-angle glaucoma experience aqueous humor accumulation within the eye causing an increase in intraocular pressure (IOP). The main cause of this rise in IOP is due to poor outflow of aqueous humor through the trabecular meshwork (TM), a tissue composed of collagen and glycosaminoglycans (GAGs) embedded with TM cells. The behavior of TM cells is impacted by their microenvironment, and studies conducted on two-dimensional plastic substrates do not necessarily reflect how TM cells would behave in their native setting. Here, we cultured human TM (hTM) cells on 3D biocompatible hydrogels composed of gelatin methacrylate (GelMA) incorporated with the glycosaminoglycans (GAGs) chondroitin sulfate (CS) and hyaluronic acid (HA). Mechanical properties were quantified by storage moduli and viscosity data. Cellular response was measured by quantifying cellular proliferation and expression of an important extracellular matrix protein, fibronectin. We have shown substrate mechanical properties to impact hTM cell proliferation over 2 weeks. It was found that the incorporation of GAGs impacted cell proliferation and fibronectin expression in hTM cells. This work will help elucidate hTM cell response with changes in their microenvironment.

Anti-VEGF antibody delivered locally reduces bony bar formation following physeal injury in rats.

Physeal injuries can result in the formation of a "bony bar" which can lead to bone growth arrest and deformities in children. Vascular endothelial growth factor (VEGF) has been shown to play a role in bony bar formation, making it a potential target to inhibit bony repair tissue after physeal injury. The goal of this study was to investigate whether the local delivery of anti-VEGF antibody (α-VEGF; 7.5 µg) from alginate:chitosan hydrogels to the tibial physeal injury site in rats prevents bony bar formation. We tested the effects of quick or delayed delivery of α-VEGF using both 90:10 and 50:50 ratio alginate:chitosan hydrogels, respectively. Male and female 6-week-old Sprague-Dawley rats received a tibial physeal injury and the injured site injected with alginate-chitosan hydrogels: (1) 90:10 (Quick Release); (2) 90:10 + α-VEGF (Quick Release + α-VEGF); (3) 50:50 (Slow Release); (4) 50:50 + α-VEGF (Slow Release + α-VEGF); or (5) Untreated. At 2, 4, and 24 weeks postinjury, animals were euthanized and tibiae assessed for bony bar and vessel formation, repair tissue type, and limb lengthening. Our results indicate that Quick Release + α-VEGF reduced bony bar and vessel formation, while also increasing cartilage repair tissue. Further, the quick release of α-VEGF neither affected limb lengthening nor caused deleterious side-effects in the adjacent, uninjured physis. This α-VEGF treatment, which inhibits bony bar formation without interfering with normal bone elongation, could have positive implications for children suffering from physeal injuries.

Formation of ordered cellular structures in suspension via label-free negative magnetophoresis.

The creation of ordered cellular structures is important for tissue engineering research. Here, we present a novel strategy for the assembly of cells into linear arrangements by negative magnetophoresis using inert, cytocompatible magnetic nanoparticles. In this approach, magnetic nanoparticles dictate the cellular assembly without relying on cell binding or uptake. The linear cell structures are stable and can be further cultured without the magnetic field or nanoparticles, making this an attractive tool for tissue engineering.

Injectable, self-healable zwitterionic cryogels with sustained microRNA - cerium oxide nanoparticle release promote accelerated wound healing.

Diabetics are prone to chronic wounds that have slower healing, and methods of accelerating the wound closure and to ensure protection from infections are critically needed. MicroRNA-146a gets dysregulated in diabetic wounds and injection of this microRNA combined with reactive oxygen species-scavenging cerium oxide nanoparticles (CNPs) can reduce inflammation and improve wound healing; however, a better delivery method than intradermal injections is needed. Here we demonstrate a biomaterial system of zwitterionic cryogels (gels formed below freezing temperatures) laden with CNP-miR146a that are topically applicable, injectable, self-healable, and provide sustained release of the therapeutic molecules. These cryogels are comprised of CBMA or SBMA and HEMA, and do not contain chemical crosslinkers. Properties of the gels can be manipulated by changing monomer type and ratio. These materials have demonstrated efficacy and viability in vivo with a diabetic mouse wound healing model. Overall, these materials have a high potential for application in wound treatments due to their ease of production, antifouling characteristics, durability, topical application, and sustained release mechanics. STATEMENT OF SIGNIFICANCE: This work presents the development of zwitterionic cryogels with unique physical properties including injectability and self-healing, that also offer highly sustained release of nanoparticles over time to improve wound healing in a diabetic mouse model. The nanoparticles are made of cerium oxide, which is known to scavenge reactive oxygen species and reduce oxidative stress, and these particles have been further tagged with a microRNA146a that has been shown to reduce inflammation. Zwitterionic materials are known for their superior antifouling properties and good biocompatibility and ability to incorporate bioactive factors. Given these properties, the use of these materials as wound healing dressings would be exciting, yet to date it has been difficult to prolong the release of bioactive factors from them due to their hydrophilicity. Previously we developed zwitterionic cyrogels with very sustained protein release over time, but those materials were quite brittle and difficult to handle. Here, we demonstrate for the first time that by removing the crosslinker molecule from our reaction and polymerizing gels under cryo-conditions, we are able to form zwitterionic cryogels that are injectable, self-healing, and with sustained release profiles. The sustained release of miRNA146a-tagged cerium oxide nanoparticles from these gels is demonstrated to speed up diabetic wound healing time and significantly reduce inflammation.