Shaping corticospinal pathways in virtual reality: effects of task complexity and sensory feedback during mirror therapy in neurologically intact individuals.

BACKGROUND: Restoration of limb function for individuals with unilateral weakness typically requires volitional muscle control, which is often not present for individuals with severe impairment. Mirror therapy-interventions using a mirror box to reflect the less-impaired limb onto the more-impaired limb-can facilitate corticospinal excitability, leading to enhanced recovery in severely impaired clinical populations. However, the mirror box applies limitations on mirror therapy, namely that all movements appear bilateral and are confined to a small area, impeding integration of complex activities and multisensory feedback (e.g., visuo-tactile stimulation). These limitations can be addressed with virtual reality, but the resulting effect on corticospinal excitability is unclear. OBJECTIVE: Examine how virtual reality-based unilateral mirroring, complex activities during mirroring, and visuo-tactile stimulation prior to mirroring affect corticospinal excitability. MATERIALS AND METHODS: Participants with no known neurological conditions (n = 17) donned a virtual reality system (NeuRRoVR) that displayed a first-person perspective of a virtual avatar that matched their motions. Transcranial magnetic stimulation-induced motor evoked potentials in the nondominant hand muscles were used to evaluate corticospinal excitability in four conditions: resting, mirroring, mirroring with prior visuo-tactile stimulation (mirroring + TACT), and control. During mirroring, the movements of each participant's dominant limb were reflected onto the nondominant limb of the virtual avatar, and the avatar's dominant limb was kept immobile (i.e., unilateral mirroring). The mirroring + TACT condition was the same as the mirroring condition, except that mirroring was preceded by visuo-tactile stimulation of the nondominant limb. During the control condition, unilateral mirroring was disabled. During all conditions, participants performed simple (flex/extend fingers) and complex (stack virtual blocks) activities. RESULTS: We found that unilateral mirroring increased corticospinal excitability compared to no mirroring (p < 0.001), complex activities increased excitability compared to simple activities during mirroring (p < 0.001), and visuo-tactile stimulation prior to mirroring decreased excitability (p = 0.032). We also found that these features did not interact with each other. DISCUSSIONS: The findings of this study shed light onto the neurological mechanisms of mirror therapy and demonstrate the unique ways in which virtual reality can augment mirror therapy. The findings have important implications for rehabilitation for design of virtual reality systems for clinical populations.

Human-centered design of a novel soft exosuit for post-stroke gait rehabilitation.

BACKGROUND: Stroke remains a major cause of long-term adult disability in the United States, necessitating the need for effective rehabilitation strategies for post-stroke gait impairments. Despite advancements in post-stroke care, existing rehabilitation often falls short, prompting the development of devices like robots and exoskeletons. However, these technologies often lack crucial input from end-users, such as clinicians, patients, and caregivers, hindering their clinical utility. Employing a human-centered design approach can enhance the design process and address user-specific needs. OBJECTIVE: To establish a proof-of-concept of the human-centered design approach by refining the NewGait® exosuit device for post-stroke gait rehabilitation. METHODS: Using iterative design sprints, the research focused on understanding the perspectives of clinicians, stroke survivors, and caregivers. Two design sprints were conducted, including empathy interviews at the beginning of the design sprint to integrate end-users' insights. After each design sprint, the NewGait device underwent refinements based on emerging issues and recommendations. The final prototype underwent mechanical testing for durability, biomechanical simulation testing for clinical feasibility, and a system usability evaluation, where the new stroke-specific NewGait device was compared with the original NewGait device and a commercial product, Theratogs®. RESULTS: Affinity mapping from the design sprints identified crucial categories for stakeholder adoption, including fit for females, ease of donning and doffing, and usability during barefoot walking. To address these issues, a system redesign was implemented within weeks, incorporating features like a loop-backed neoprene, a novel closure mechanism for the shoulder harness, and a hook-and-loop design for the waist belt. Additional improvements included reconstructing anchors with rigid hook materials and replacing latex elastic bands with non-latex silicone-based bands for enhanced durability. Further, changes to the dorsiflexion anchor were made to allow for barefoot walking. Mechanical testing revealed a remarkable 10-fold increase in durability, enduring 500,000 cycles without notable degradation. Biomechanical simulation established the modularity of the NewGait device and indicated that it could be configured to assist or resist different muscles during walking. Usability testing indicated superior performance of the stroke-specific NewGait device, scoring 84.3 on the system usability scale compared to 62.7 for the original NewGait device and 46.9 for Theratogs. CONCLUSION: This study successfully establishes the proof-of-concept for a human-centered design approach using design sprints to rapidly develop a stroke-specific gait rehabilitation system. Future research should focus on evaluating the clinical efficacy and effectiveness of the NewGait device for post-stroke rehabilitation.

Number of conditioning trials, but not stimulus intensity, influences operant conditioning of brain responses after total knee arthroplasty.

PURPOSE: The primary purpose of this randomized, cross-sectional study was to determine whether operant conditioning of motor evoked torque (MEPTORQUE) in individuals with total knee arthroplasty (TKA) increases quadriceps MEPTORQUE responses within a single session and induces acute corticospinal adaptations by producing sustained increases in MEPTORQUE after training. A secondary purpose was to determine if these changes were affected by the stimulus intensity and number of training trials. METHODS: Thirty participants were block-randomized into one of three groups based on the participant's active motor threshold (100%, 120%, and 140%) to evaluate the effect of stimulus intensity. Participants received three blocks of conditioning trials (COND), where they trained to increase their MEPTORQUE. Control (CTRL) transcranial magnetic stimulation pulses were provided before and after each COND block to establish baseline corticospinal excitability and to evaluate the effect of the number of training trials. Two MEPTORQUE recruitment curves were collected to evaluate the effect of up-conditioning on acute corticospinal adaptations. RESULTS: TKA participants were able to successfully increase their MEPTORQUE in a single session (F3,81 = 10.719, p < 0.001) and induce acute corticospinal adaptations (F1,27 = 20.029, p < 0.001), indicating sustained increases in quadriceps corticospinal excitability due to operant conditioning. While the stimulus intensity used during training did not affect the ability to increase MEPTORQUE (F2,26 = 0.021, n.s.) or its associated acute adaptations (F2,27 = 0.935, n.s.), the number of training trials significantly influenced these outcomes (F3,81 = 10.719, p < 0.001; F3,81 = 4.379, p = 0.007, respectively). CONCLUSION: Operant conditioning is a feasible approach for improving quadriceps corticospinal excitability following TKA. While any of the three stimulus intensities evaluated in this study may be used in future operant conditioning interventions, using a low or moderate stimulus intensity and 150 training trials are recommended to improve treatment efficiency and patient adherence. LEVEL OF EVIDENCE: Level II.

Functional Resistance Training After Anterior Cruciate Ligament Reconstruction Improves Knee Angle and Moment Symmetry During Gait: A Randomized Controlled Clinical Trial.

PURPOSE: The purpose of this study was to determine 1) whether progressive functional resistance training (FRT) during walking would improve knee biomechanical symmetry after anterior cruciate ligament (ACL) reconstruction and 2) whether the mode of delivery of FRT would have a differential effect on symmetry. METHODS: Thirty individuals who underwent primary ACL reconstruction at a single institution volunteered for this study. Participants were randomized into one of three groups: 1) BRACE, 2) BAND, or 3) CONTROL. The BRACE group received FRT with a novel robotic knee brace along with real-time kinematic feedback. The BAND group received FRT with a custom resistance band device along with real-time kinematic feedback. The CONTROL group received only real-time kinematic feedback. Participants in all groups received training (2-3/week for 8 weeks) while walking on a treadmill. Knee angle and moment symmetry were calculated immediately prior to beginning the intervention and within 1 week of completing the intervention. Statistical Parametric Mapping was used to assess differences in biomechanical symmetry between groups across time. RESULTS: There was a significant interaction in knee moment symmetry from 21 and 24% of the stance phase (P = .046), in which the BAND group had greater improvements following training compared with both BRACE (P = .043) and CONTROL groups (P = .002). There was also a significant time effect in knee angle symmetry from 68 to 79% of the stance phase (P = .028) and from 97 to 100% of the swing phase (P = .050) in which only the BRACE group showed significant improvements after the intervention (stance: P = .020 and swing: P < .001). CONCLUSION: The results of this randomized controlled clinical trial indicate that 8 weeks of progressive FRT during treadmill walking in individuals with ACL reconstruction improves knee angle and moment symmetry during gait. The findings suggest that FRT could serve as a potential therapeutic adjuvant to traditional rehabilitation after ACL reconstruction and can help restore knee joint biomechanical symmetry. LEVEL OF EVIDENCE: Level II, randomized controlled trial.

Can Increased Locomotor Task Difficulty Differentiate Knee Muscle Forces After Anterior Cruciate Ligament Reconstruction?

Changes in knee mechanics following anterior cruciate ligament (ACL) reconstruction are known to be magnified during more difficult locomotor tasks, such as when descending stairs. However, it is unclear if increased task difficulty could distinguish differences in forces generated by the muscles surrounding the knee. This study examined how knee muscle forces differ between individuals with ACL reconstruction with different graft types (hamstring tendon and patellar tendon autograft) and "healthy" controls when performing tasks with increasing difficulty. Dynamic simulations were used to identify knee muscle forces in 15 participants when walking overground and descending stairs. The analysis was restricted to the stance phase (foot contact through toe-off), yielding 162 separate simulations of locomotion in increasing difficulty: overground walking, step-to-floor stair descent, and step-to-step stair descent. Results indicated that knee muscle forces were significantly reduced after ACL reconstruction, and stair descent tasks better discriminated changes in the quadriceps and gastrocnemii muscle forces in the reconstructed knees. Changes in quadriceps forces after a patellar tendon graft and changes in gastrocnemii forces after a hamstring tendon graft were only revealed during stair descent. These results emphasize the importance of incorporating sufficiently difficult tasks to detect residual deficits in muscle forces after ACL reconstruction.

Enhancing Mirror Therapy via Scaling and Shared Control: A Novel Open-Source Virtual Reality Platform for Stroke Rehabilitation.

Mirror therapy is increasingly used in stroke rehabilitation to improve functional movements of the affected limb. However, the extent of mirroring in conventional mirror therapy is typically fixed (1:1) and cannot be tailored based on the patient's impairment level. Further, the movements of the affected limb are not actively incorporated in the therapeutic process. To address these issues, we developed an immersive VR system using HTC Vive and Leap Motion, which communicates with our free and open-source software environment programmed using SteamVR and the Unity 3D gaming engine. The mirror therapy VR environment was incorporated with two novel features: (1) scalable mirroring and (2) shared control. In the scalable mirroring, mirror movements were programmed to be scalable between 0 and 1, where 0 represents no movements, 0.5 represents 50% mirroring, and 1 represents 100% mirroring. In shared control, the contribution of the mirroring limb to the movements was programmed to be scalable between 0 to 1, where 0 represents 100% contribution from the mirroring limb (i.e., no mirroring), 0.5 represents 50% of movements from the mirrored limb and 50% of movements from the mirroring limb, and 1 represents full mirroring (i.e., no shared movements). Validation experiments showed that these features worked appropriately. The proposed VR-based mirror therapy is the first fully developed system that is freely available to the rehabilitation science community. The scalable and shared control features can diversify mirror therapy and potentially augment the outcomes of rehabilitation, although this needs to be verified through future experiments.

Effect of knee joint angle on side-to-side strength ratios.

Isometric knee extensor and flexor strength are typically tested at different joint angles due to the differences in length-tension relationships of the quadriceps and hamstring muscles. The efficiency of strength testing can be improved if the same angle can be used to test both the knee extensor and flexor muscle groups. The aim of this study was to determine an optimal angle for isometric knee strength testing by examining the effect of knee angle on side-to-side peak torque ratios. Eighteen active young people (9 males and 9 females) participated in this study. Knee extensor and knee flexor strength were tested on both sides at 30°, 60°, and 90° of knee flexion. The effect of knee flexion angle on side-to-side peak torque ratios, raw torque values, and side-to-side flexor-to-extensor torque ratios were assessed. Side-to-side knee extensor peak torque ratios and knee flexor-to-extensor torque ratios differed significantly by knee flexion angle (p = 0.024 and p = 0.011, respectively), but side-to-side knee flexor peak torque ratios did not differ significantly (p = 0.311). When considering both side-to-side peak torque ratios and flexor-to-extensor torque ratios, the values were more symmetrical (i.e., closer to 100%) only at 60° of knee flexion. Our results indicate that both the knee flexors and the knee extensors can be tested clinically at 60° of knee flexion. Our results also indicate that the hamstrings can be tested at any of the 3 angles if the examiner is interested in side-to-side ratios rather than raw torque values. These results may facilitate more efficient and flexible clinical knee strength testing.

Conditioning of Motor Evoked Responses After Anterior Cruciate Ligament Reconstruction: Effects of Stimulus Intensity.

BACKGROUND: Operant conditioning of motor evoked torque (MEPTORQUE) can directly target the corticospinal pathway in patients with anterior cruciate ligament (ACL) reconstruction. However, it remains unclear whether operant conditioning can elicit short-term improvements in corticospinal excitability and whether these improvements are influenced by stimulus intensity. HYPOTHESIS: Quadriceps MEPTORQUE responses can be upconditioned in a single session and will elicit short-term adaptations in corticospinal excitability, with higher stimulus intensities eliciting greater effects. STUDY DESIGN: Randomized controlled laboratory study. LEVEL OF EVIDENCE: Level 2. METHODS: Thirty-six participants were assessed during a single session of an operant conditioning protocol. Participants were randomized into 1 of 3 groups for stimulus intensity used during operant conditioning based on the participant's active motor threshold (AMT: 100%, 120%, and 140%). Quadriceps MEPTORQUE amplitude was evaluated during a block of control transcranial magnetic stimulation trials (CTRL) to establish baseline corticospinal excitability, and 3 blocks of conditioning trials (COND) during which participants trained to upcondition their MEPTORQUE. MEPTORQUE recruitment curves were collected to evaluate the effect of operant conditioning on acute corticospinal adaptations. RESULTS: Participants with ACL reconstruction could upcondition their MEPTORQUE in a single session (P < 0.01; CTRL, 17.27 ± 1.28; COND, 21.35 ± 1.28 [mean ± standard error [SE] in N·m]), but this ability was not influenced by the stimulus intensity used during training (P = 0.84). Furthermore, significant improvements in corticospinal excitability were observed (P = 0.05; PRE, 687.91 ± 50.15; POST, 761.08 ± 50.15 [mean ± SE in N·m %AMT]), but stimulus intensity did not influence corticospinal adaptations (P = 0.67). CONCLUSION: Operant conditioning can elicit short-term neural adaptations in ACL-reconstructed patients. Future operant conditioning paradigms may effectively use any of the 3 stimulus intensities studied herein. CLINICAL RELEVANCE: Operant conditioning may be a feasible approach to improve corticospinal excitability after ACL reconstruction.

Design and Validation of a Pancake Style Planetary Gearbox for an Eddy Current-Based Wearable Gait Training Robot.

Eddy current brakes have been recently used for functional resistance training in individuals with neurological and orthopaedic disorders. These devices consist of a gearbox, a conductive disc, and permanent magnets that can be moved relative to the disc to alter resistance. However, current devices use a commercial planetary gearbox with a tall profile that sticks out from the leg, which affects wearability. This is coupled with the large system inertia, which together impedes potential device transition to clinical and in-home use. In this study, we developed a low-profile, pancake-style planetary gearbox that greatly reduces the protrusion of the device from the leg. We performed a design analysis and optimization to minimize the thickness and inertia of the device while ensuring that it could withstand the maximum expected torque (50 Nm). We then performed human subjects experiments to examine the effectiveness of our new design for functional resistance training. The results indicated that all leg muscles showed a significant increase in activation during resisted conditions. There were also significant after-effects on medial hamstring activation. These results indicate that the new design is a feasible method for functional resistance training and may have a potential clinical value in gait rehabilitation.

Altered Corticospinal and Intracortical Excitability After Stroke: A Systematic Review With Meta-Analysis.

BACKGROUND: Intracortical inhibitory/faciliatory measures are affected after stroke; however, the evidence is conflicting. OBJECTIVE: This meta-analysis aimed to investigate the changes in motor threshold (MT), motor evoked potential (MEP), short-interval intracortical inhibition (SICI), and intracortical facilitation (ICF), and identify sources of study variability using a machine learning approach. METHODS: We identified studies that objectively evaluated corticospinal excitability and intracortical inhibition/facilitation after stroke using transcranial magnetic stimulation. Pooled within- (ie, affected hemisphere [AH] vs unaffected hemisphere [UH]) and between-subjects (ie, AH and UH vs Control) standardized mean differences were computed. Decision trees determined which factors accurately predicted studies that showed alterations in corticospinal excitability and intracortical inhibition/facilitation. RESULTS: A total of 35 studies (625 stroke patients and 328 healthy controls) were included. MT was significantly increased and MEP was significantly decreased (ie, reduced excitability) in the AH when compared with the UH and Control (P < .01). SICI was increased (ie, reduced inhibition) for the AH when compared with the UH, and for the AH and UH when compared with Control (P < .001). ICF was significantly increased (ie, increased facilitation) in the AH when compared with UH (P = .016) and decreased in UH when compared with Control (P < 0.001). Decision trees indicated that demographic and methodological factors accurately predicted (73%-86%) studies that showed alterations in corticospinal and intracortical excitability measures. CONCLUSIONS: The findings indicate that stroke alters corticospinal and intracortical excitability measures. Alterations in SICI and ICF may reflect disinhibition of the motor cortex after stroke, which is contrary to the notion that stroke increases inhibition of the affected side.

Reliability and minimal detectable change of stiffness and other mechanical properties of the ankle joint in standing and walking.

BACKGROUND: Ankle joint stiffness and viscosity are fundamental mechanical descriptions that govern the movement of the body and impact an individual's walking ability. Hence, these internal properties of a joint have been increasingly used to evaluate the effects of pathology (e.g., stroke) and in the design and control of robotic and prosthetic devices. However, the reliability of these measurements is currently unclear, which is important for translation to clinical use. RESEARCH QUESTION: Can we reliably measure the mechanical impedance parameters of the ankle while standing and walking? METHODS: Eighteen able-bodied individuals volunteered to be tested on two different days separated by at least 24 h. Participants received several small random ankle dorsiflexion perturbations while standing and during the stance phase of walking using a custom-designed robotic platform. Three-dimensional motion capture cameras and a 6-component force plate were used to quantify ankle joint motions and torque responses during normal and perturbed conditions. Ankle mechanical impedance was quantified by computing participant-specific ensemble averages of changes in ankle angle and torque due to perturbation and fitting a second-order parametric model consisting of stiffness, viscosity, and inertia. The test-retest reliability of each parameter was assessed using intraclass correlation coefficients (ICCs). We also computed the minimal detectable change (MDC) for each impedance parameter to establish the smallest amount of change that falls outside the measurement error of the instrument. RESULTS: In standing, the reliability of stiffness, viscosity, and inertia was good to excellent (ICCs=0.67-0.91). During walking, the reliability of stiffness and viscosity was good to excellent (ICCs=0.74-0.84) while that of inertia was fair to good (ICCs=0.47-0.68). The MDC for a single subject ranged from 20%- 65% of the measurement mean but was higher (>100%) for inertia during walking. SIGNIFICANCE: Results indicate that dynamic measures of ankle joint impedance were generally reliable and could serve as an adjunct clinical tool for evaluating gait impairments.

A novel virtual robotic platform for controlling six degrees of freedom assistive devices with body-machine interfaces.

Body-machine interfaces (BoMIs)-systems that control assistive devices (e.g., a robotic manipulator) with a person's movements-offer a robust and non-invasive alternative to brain-machine interfaces for individuals with neurological injuries. However, commercially-available assistive devices offer more degrees of freedom (DOFs) than can be efficiently controlled with a user's residual motor function. Therefore, BoMIs often rely on nonintuitive mappings between body and device movements. Learning these mappings requires considerable practice time in a lab/clinic, which can be challenging. Virtual environments can potentially address this challenge, but there are limited options for high-DOF assistive devices, and it is unclear if learning with a virtual device is similar to learning with its physical counterpart. We developed a novel virtual robotic platform that replicated a commercially-available 6-DOF robotic manipulator. Participants controlled the physical and virtual robots using four wireless inertial measurement units (IMUs) fixed to the upper torso. Forty-three neurologically unimpaired adults practiced a target-matching task using either the physical (sample size n = 25) or virtual device (sample size n = 18) involving pre-, mid-, and post-tests separated by four training blocks. We found that both groups made similar improvements from pre-test in movement time at mid-test (Δvirtual: 9.9 ± 9.5 s; Δphysical: 11.1 ± 9.9 s) and post-test (Δvirtual: 11.1 ± 9.1 s; Δphysical: 11.8 ± 10.5 s) and in path length at mid-test (Δvirtual: 6.1 ± 6.3 m/m; Δphysical: 3.3 ± 3.5 m/m) and post-test (Δvirtual: 6.6 ± 6.2 m/m; Δphysical: 3.5 ± 4.0 m/m). Our results indicate the feasibility of using virtual environments for learning to control assistive devices. Future work should determine how these findings generalize to clinical populations.

Corticospinal excitability during motor preparation of upper extremity reaches reflects flexor muscle synergies: A novel principal component-based motor evoked potential analyses.

Background: Previous research has shown that noninvasive brain stimulation can be used to study how the central nervous system (CNS) prepares the execution of a motor task. However, these previous studies have been limited to a single muscle or single degree of freedom movements (e.g., wrist flexion). It is currently unclear if the findings of these studies generalize to multi-joint movements involving multiple muscles, which may be influenced by kinematic redundancy and muscle synergies. Objective: The objective of this study was to characterize corticospinal excitability during motor preparation in the cortex prior to functional upper extremity reaches. Methods: 20 participants without neurological impairments volunteered for this study. During the experiment, the participants reached for a cup in response to a visual "Go Cue". Prior to movement onset, we used transcranial magnetic stimulation (TMS) to stimulate the motor cortex and measured the changes in motor evoked potentials (MEPs) in several upper extremity muscles. We varied each participant's initial arm posture and used a novel synergy-based MEP analysis to examine the effect of muscle coordination on MEPs. Additionally, we varied the timing of the stimulation between the Go Cue and movement onset to examine the time course of motor preparation. Results: We found that synergies with strong proximal muscle (shoulder and elbow) components emerged as the stimulation was delivered closer to movement onset, regardless of arm posture, but MEPs in the distal (wrist and finger) muscles were not facilitated. We also found that synergies varied with arm posture in a manner that reflected the muscle coordination of the reach. Conclusions: We believe that these findings provide useful insight into the way the CNS plans motor skills.

Rest the Brain to Learn New Gait Patterns after Stroke.

Background: The ability to relearn a lost skill is critical to motor recovery after a stroke. Previous studies indicate that stroke typically affects the processes underlying motor control and execution but not the learning of those skills. However, these prior studies could have been confounded by the presence of significant motor impairments and/or have not focused on motor acuity tasks (i.e., tasks focusing on the quality of executed actions) that have direct functional relevance to rehabilitation. Methods: Twenty-five participants (10 stroke; 15 controls) were recruited for this prospective, case-control study. Participants learned a novel foot-trajectory tracking task on two consecutive days while walking on a treadmill. On day 1, participants learned a new gait pattern by performing a task that necessitated greater hip and knee flexion during the swing phase of the gait. On day 2, participants repeated the task with their training leg to test retention. An average tracking error was computed to determine online and offline learning and was compared between stroke survivors and uninjured controls. Results: Stroke survivors were able to improve their tracking performance on the first day (p=0.033); however, the amount of learning in stroke survivors was lower in comparison with the control group on both days (p≤0.05). Interestingly, the offline gains in motor learning were higher in stroke survivors when compared with uninjured controls (p=0.011). Conclusions: The results suggest that even high-functioning stroke survivors may have difficulty acquiring new motor skills related to walking, which may be related to the underlying neural damage caused at the time of stroke. Furthermore, it is likely that stroke survivors may require longer training with adequate rest to acquire new motor skills, and rehabilitation programs should target motor skill learning to improve outcomes after stroke.

Reducing robotic guidance during robot-assisted gait training improves gait function: a case report on a stroke survivor.

OBJECTIVE: To test the feasibility of patient-cooperative robotic gait training for improving locomotor function of a chronic stroke survivor with severe lower-extremity motor impairments. DESIGN: Single-subject crossover design. SETTING: Performed in a controlled laboratory setting. PARTICIPANT: A 62-year-old man with right temporal lobe ischemic stroke was recruited for this study. The baseline lower-extremity Fugl-Meyer score of the subject was 10 on a scale of 34, which represented severe impairment in the paretic leg. However, the subject had a good ambulation level (community walker with the aid of a stick cane and ankle-foot orthosis) and showed no signs of sensory or cognitive impairments. INTERVENTIONS: The subject underwent 12 sessions (3 times per week for 4wk) of conventional robotic training with the Lokomat, where the robot provided full assistance to leg movements while walking, followed by 12 sessions (3 times per week for 4wk) of patient-cooperative robotic control training, where the robot provided minimal guidance to leg movements during walking. MAIN OUTCOME MEASURES: Clinical outcomes were evaluated before the start of the intervention, immediately after 4 weeks of conventional robotic training, and immediately after 4 weeks of cooperative control robotic training. These included: (1) self-selected and fast walking speed, (2) 6-minute walk test, (3) Timed Up & Go test, and (4) lower-extremity Fugl-Meyer score. RESULTS: Results showed that clinical outcomes changed minimally after full guidance robotic training, but improved considerably after 4 weeks of reduced guidance robotic training. CONCLUSIONS: The findings from this case study suggest that cooperative control robotic training is superior to conventional robotic training and is a feasible option to restoring locomotor function in ambulatory stroke survivors with severe motor impairments. A larger trial is needed to verify the efficacy of this advanced robotic control strategy in facilitating gait recovery after stroke.

Functional Resistance Training Differentially Alters Gait Kinetics After Anterior Cruciate Ligament Reconstruction: A Pilot Study.

BACKGROUND: Quadriceps weakness is common after anterior cruciate ligament (ACL) reconstruction and can alter gait mechanics. Functional resistance training (FRT) is a novel approach to retraining strength after injury, but it is unclear how it alters gait mechanics. Therefore, we tested how 3 different types of FRT devices: a knee brace resisting extension (unidirectional brace), a knee brace resisting extension and flexion (bidirectional brace), and an elastic band pulling backwards on the ankle (elastic band)-acutely alter gait kinetics in this population. HYPOTHESIS: The type of FRT device will affect ground-reaction forces (GRFs) during and after the training. Specifically, the uni- and bidirectional braces will increase GRFs when compared with the elastic band. STUDY DESIGN: Crossover study. LEVEL OF EVIDENCE: Level 2. METHODS: A total of 15 individuals with ACL reconstruction received FRT with each device over 3 separate randomized sessions. During training, participants walked on a treadmill while performing a tracking task with visual feedback. Sessions contained 5 training trials (180 seconds each) with rest between. Vertical and anterior-posterior GRFs were assessed on the ACL-reconstructed leg before, during, and after training. Changes in GRFs were compared across devices using 1-dimensional statistical parametric mapping. RESULTS: Resistance applied via bidirectional brace acutely increased gait kinetics during terminal stance/pre-swing (ie, push-off), while resistance applied via elastic band acutely increased gait kinetics during initial contact/loading (ie, braking). Both braces behaved similarly, but the unidirectional brace was less effective for increasing push-off GRFs. CONCLUSION: FRT after ACL reconstruction can acutely alter gait kinetics during training. Devices can be applied to selectively alter gait kinetics. However, the long-term effects of FRT after ACL reconstruction with these devices are still unknown. CLINICAL RELEVANCE: FRT may be applied to alter gait kinetics of the involved limb after ACL reconstruction, depending on the device used.

Functional Resistance Training With Viscous and Elastic Devices: Does Resistance Type Acutely Affect Knee Function?

OBJECTIVE: Functional resistance training (FRT) during walking is an emerging approach for rehabilitating individuals with neuromuscular or orthopedic injuries. During FRT, wearable exoskeleton/braces can target resistance to a weakened leg joint; however, the resistive properties of the training depend on the type of resistive elements used in the device. Hence, this study was designed to examine how the biomechanical and neural effects of functional resistance training differ with viscous and elastic resistances during both treadmill and overground walking. METHODS: Fourteen able-bodied individuals were trained on two separate sessions with two devices that provided resistance to the knee (viscous and elastic) while walking on a treadmill. We measured gait biomechanics and muscle activation during training, as well as kinematic aftereffects and changes in peripheral fatigue and neural excitability after training. RESULTS: We found the resistance type differentially altered gait kinetics during training-elastic resistance increased knee extension during stance while viscous resistance primarily affected swing. Also, viscous resistance increased power generation while elastic resistance could increase power absorption. Both devices resulted in significant kinematic and neural aftereffects. However, overground kinematic aftereffects and neural excitability did not differ between devices. CONCLUSION: Different resistance types can be used to alter gait biomechanics during training. While there were no resistance-specific changes in acute neural adaptation following training, it is still possible that prolonged and repeated training could produce differential effects. SIGNIFICANCE: Resistance type alters the kinetics of functional resistance training. Prolonged and repeated training sessions on patients will be needed to further measure the effects of these devices.

Breaking the barriers to designing online experiments: A novel open-source platform for supporting procedural skill learning experiments.

BACKGROUND: Motor learning experiments are typically performed in laboratory environments, which can be time-consuming and require dedicated equipment/personnel, thus limiting the ability to gather data from large samples. To address this problem, some researchers have transitioned to unsupervised online experiments, showing advantages in participant recruitment without losing validity. However, most online platforms require coding experience or time-consuming setups to create and run experiments, limiting their usage across the field. METHOD: To tackle this issue, an open-source web-based platform was developed (https://experiments.neurro-lab.engin.umich.edu/) to create, run, and manage procedural skill learning experiments without coding or setup requirements. The feasibility of the platform and the comparability of the results between supervised (n = 17) and unsupervised (n = 24) were tested in 41 naive right-handed participants using an established sequential finger tapping task. The study also tested if a previously reported rapid form of offline consolidation (i.e., microscale learning) in procedural skill learning could be replicated with the developed platform and evaluated the extent of interlimb transfer associated with the finger tapping task. RESULTS: The results indicated that the performance metrics were comparable between the supervised and unsupervised groups (all p's > 0.05). The learning curves, mean tapping speeds, and micro-scale learning were similar to previous studies. Training led to significant improvements in mean tapping speed (2.22 ± 1.48 keypresses/s, p < 0.001) and a significant interlimb transfer of learning (1.22 ± 1.43 keypresses/s, p < 0.05). CONCLUSIONS: The results show that the presented platform may serve as a valuable tool for conducting online procedural skill-learning experiments.

Transcranial random noise stimulation to augment hand function in individuals with moderate-to-severe stroke: A pilot randomized clinical trial.

Background: Interventions to recover upper extremity (UE) function after moderate-to-severe stroke are limited. Transcranial random noise stimulation (tRNS) is an emerging non-invasive technique to improve neuronal plasticity and may potentially augment functional outcomes when combined with existing interventions, such as functional electrical stimulation (FES). Objective: The objective of this study was to investigate the feasibility and preliminary efficacy of combined tRNS and FES-facilitated task practice to improve UE impairment and function after moderate-to-severe stroke. Methods: Fourteen individuals with UE weakness were randomized into one of two groups: 1) tRNS with FES-facilitated task practice, or 2) sham-tRNS with FES-facilitated task practice. Both groups involved 18 intervention sessions (3 per week for 6 weeks). tRNS was delivered at 2 mA current between 100-500 Hz for the first 30 minutes of FES-facilitated task practice. We evaluated the number of sessions completed, adverse effects, participant satisfaction, and intervention fidelity between the two therapists. UE impairment (Fugl-Meyer Upper Extremity, FMUE), function (Wolf Motor Function Test, WMFT), participation (Stroke Impact Scale hand score, SIS-H), and grip strength were assessed at baseline, within 1 week and 3 months after completing the intervention. Results: All participants completed the 18 intervention sessions. Participants reported minimal adverse effects (mild tingling in head). The two trained therapists demonstrated 93% adherence and 96% competency with the intervention protocol. FMUE and SIS-H improved significantly more in the tRNS group than in the sham-tRNS group at both timepoints (p≤0.05), and the differences observed exceeded the clinically meaningful differences for these scores. The WMFT and paretic hand grip strength improved in both groups after the intervention (p≤0.05), with no significant between group differences. Conclusion: Our findings show for the first time that combining tRNS and FES-facilitated task practice is a feasible and promising approach to improve UE impairment and function after moderate-to-severe stroke.

Walking speed differentially affects lower extremity biomechanics in individuals with anterior cruciate ligament reconstruction compared to uninjured controls.

BACKGROUND: Walking biomechanics are commonly affected after anterior cruciate ligament reconstruction and differ compared to uninjured controls. Manipulating task difficulty has been shown to affect the magnitude of walking impairments in those early after knee surgery but it is unclear if patients in later phases post-op are similarly affected by differing task demands. Here, we evaluated the effects of manipulating walking speed on between-limb differences in ground reaction force and knee biomechanics in those with and without anterior cruciate ligament reconstruction. METHODS: We recruited 28 individuals with anterior cruciate ligament reconstruction and 20 uninjured control participants to undergo walking assessments at three speeds (self-selected, 120%, and 80% self-selected speed). Main outcomes included sagittal plane knee moments, angles, excursions, and ground reaction forces (vertical and anterior-posterior). FINDINGS: We observed walking speed differentially impacted force and knee-outcomes in those with anterior cruciate ligament reconstruction. Between-limb differences increased at fast and decreased at slow speeds in those with anterior cruciate ligament reconstruction while uninjured participants maintained between-limb differences regardless of speed (partial η2 = 0.13-0.33, p < 0.05). Anterior cruciate ligament reconstruction patients underloaded the surgical limb relative to both the contralateral, and uninjured controls in GRFs and sagittal plane knee moments (partial η2 range = 0.13-0.25, p < 0.05). INTERPRETATION: Overall, our findings highlight the persistence of walking impairments in those with anterior cruciate ligament reconstruction despite completing formal rehabilitation. Further research should consider determining if those displaying larger changes in gait asymmetries in response to fast walking also exhibit poorer strength and/or joint health outcomes.