Trityl-Based Lanthanide-Supramolecular Assemblies Exhibiting Slow Magnetic Relaxation.

The triphenylmethane (trityl) group has been recognized as a supramolecular synthon in crystal engineering, molecular machine rotors and stereochemical chirality inductors in materials science. Herein we demonstrate for the first time how it can be utilized in the domain of molecular magnetic materials through shaping of single molecule magnet (SMM) properties within the lanthanide complexes in tandem with other non-covalent interactions. Trityl-appended mono- (HL1 ) and bis-compartmental (HL2 ) hydrazone ligands were synthesized and complexated with Dy(III) and Er(III) triflate and nitrate salts to generate four monometallic (1-4) and two bimetallic (5, 6) complexes. The static and dynamic magnetic properties of 1-6 were investigated, revealing that only ligand HL1 induces assemblies (1-4) capable of showing SMM behaviour, with Dy(III) congeners (1, 2) able to exhibit the phenomenon also under zero field conditions. Theoretical ab initio studies helped in determination of Dy(III) energetic levels, magnetic anisotropic axes and corroborated magnetic relaxation mechanisms to be a combination of Raman and quantum tunnelling in zero dc field, the latter being cancelled in the optimum non-zero dc field. Our work represents the first study of magneto-structural correlations within the trityl Ln-SMMs, leading to generation of slowly relaxing zero-field dysprosium complexes within the hydrogen-bonded assemblies.

New Cu(II), Mn(II) and Mn(III) Schiff base complexes cause noncovalent interactions: X-ray crystallography survey, Hirshfeld surface analysis and molecular simulation investigation against SARS-CoV-2.

In this study, polynuclear Cu(II) complex (1), Mn(II) and Mn(III) complex (2) have been prepared with a Schiff base ligand derived from 2-Hydroxy-3-methoxybenzaldehyde with 2-amino-2-methyl-1-propanol. The compounds were characterized by elemental analysis, FT-IR, and UV-Vis spectroscopy. The molecular and crystal structures of (1-2) were determined by the single-crystal x-ray diffraction technique. It turned out that Cu(II) complex (1) forms an S4 -symmetrical tetrameric cage structure, with square-planar coordinated Cu and bridging O atoms at the vertexes of the approximate cube. In the crystal structure of 1, there are large channels along the c-axis, between the tetramers; the solvent- DMSO molecules, occupies these channels. In turn, the complex (2) creates a centrosymmetric trimeric structure, with three octahedrally coordinated Mn ions bridged by O atoms from ligand molecules and acetate ions. The electrochemical behavior studies of the complexes in DMSO displayed the electronic effects of the groups on the redox potential. The redox behavior of Schiff base (1) and (2) complexes included quasi -reversible and irreversible voltammograms, respectively. Intermolecular interactions in the solid states were studied by Hirshfeld surface analysis. These studies provide a comprehensive description of these inter-contact exchanges using an attractive graphical representation using Hirshfeld surfaces and fingerprint plots, along with enrichment ratios. Furthermore, assessment of the inhibitory effect against coronavirus (main protease SARS-CoV-2) was performed by a molecular docking study for both complexes (1 and 2). Both complexes showed a good affinity for CoV-2 for PDB protein ID: 6M03 and 6Y2F.

New N4-Donor Ligands as Supramolecular Guests for DNA and RNA: Synthesis, Structural Characterization, In Silico, Spectrophotometric and Antimicrobial Studies.

The present work reports the synthesis of new N4-donor compounds carrying p-xylyl spacers in their structure. Different Schiff base aliphatic N-donors were obtained synthetically and subsequently evaluated for their ability to interact with two models of nucleic acids: calf-thymus DNA (CT-DNA) and the RNA from yeast Saccharomyces cerevisiae (herein simply indicated as RNA). In more detail, by condensing p-xylylenediamine and a series of aldehydes, we obtained the following Schiff base ligands: 2-thiazolecarboxaldehyde (L1), pyridine-2-carboxaldehyde (L2), 5-methylisoxazole-3-carboxaldehyde (L3), 1-methyl-2-imidazolecarboxaldehyde (L4), and quinoline-2-carboxaldehyde (L5). The structural characterisation of the ligands L1-L5 (X-ray, 1H NMR, 13C NMR, elemental analysis) and of the coordination polymers {[CuL1]PF6}n (herein referred to as Polymer1) and {[AgL1]BF4}n, (herein referred to as Polymer2, X-ray, 1H NMR, ESI-MS) is herein described in detail. The single crystal X-ray structures of complexes Polymer1 and Polymer2 were also investigated, leading to the description of one-dimensional coordination polymers. The spectroscopic and in silico evaluation of the most promising compounds as DNA and RNA binders, as well as the study of the influence of the 1D supramolecular polymers Polymer1 and Polymer2 on the proliferation of Escherichia coli bacteria, were performed in view of their nucleic acid-modulating and antimicrobial applications. Spectroscopic measurements (UV-Vis) combined with molecular docking calculations suggest that the thiazolecarboxaldehyde derivative L1 is able to bind CT-DNA with a mechanism different from intercalation involving the thiazole ring in the molecular recognition and shows a binding affinity with DNA higher than RNA. Finally, Polymer2 was shown to slow down the proliferation of bacteria much more effectively than the free Ag(I) salt.

New Anderson-Based Polyoxometalate Covalent Organic Frameworks as Electrodes for Energy Storage Boosted Through Keto-Enol Tautomerization.

The unique electrochemical properties of polyoxometalates (POMs) render them ideal components for the fabrication of next-generation high-performance energy storage systems. However, their practical applications have been hindered by their high solubility in common electrolytes. This problem can be overcome by the effective hybridization of POMs with other materials. Here we present the design and synthesis of two novel polyoxometalate-covalent organic frameworks (POCOF) via one-pot solvothermal strategy between an amino-functionalized Anderson-type POM and a trialdehyde-based building unit. We show that structural and functional complexity can be enriched by adding hydroxyl groups in the 2,4,6 position to the benzene-1,3,5-tricarbaldehyde allowing to exploit for the first time in POCOFs the keto-enol tautomerization as additional feature to impart greater chemical stability to the COFs and enhanced properties leading to large specific surface area (347 m2 /g) and superior electrochemical performance of the POCOF-1 electrodes, when compared with POCOF-2 electrodes that possess only imine-type linkage and with pristine POM electrodes. Specifically, POCOF-1 electrodes display remarkable specific, areal, and volumetric capacitance (125 F/g, 248 mF/cm2 and 41.9 mF/cm3 , respectively) at a current density of 0.5 A/g, a maximum energy density (56.2 Wh/kg), a maximum power density (3.7 kW/kg) and an outstanding cyclability (90 % capacitance retention after 5000 cycles).

Electrochemistry and Electrochromic Performance of a Metallopolymer Formed by Electropolymerization of a Fe(II) Complex with a Triphenylamine-Hydrazone Ligand.

The complex of Fe(II) ions of general formula [FeL2 ](BF4 )2 with triphenylamine-hydrazone ligand L has been synthesized and characterized. Oxidative electropolymerization of the complex proceeded smoothly on the working electrode producing a homogenous thin film of metallopolymer. The film thickness and morphology of the layer was investigated by microscopy techniques such as scanning electron microscopy and atomic force microscopy, and the composition of the film was confirmed by X-ray photoelectron spectroscopy analysis. It was found that fifty successive oxidation/reduction cycles resulted in a 120 nm thick film on the electrode surface. The metallopolymer was also characterized using cyclic voltammetry and spectroelectrochemical methods. The film was found to change its color from yellow to green-blue, exhibit high change in transmittance of 60 % at 770 nm, and possess good electrochemical stability during 375 cycles of switching of the potential between -0.1 V and +1.5 V, owing to the presence of metal ions that link two ligand molecules resulting in formation of highly cross-linked film. The switching times (coloration and bleaching) were calculated to be 34.2 s and 7.3 s, respectively. Coloration efficiency of the formed film of polymeric complex was found to be 144 cm2 C-1 .

Mechanochemical Synthesis of Fluorinated Imines.

A number of imines, including 12 new compounds, previously not reported in the literature, derived from variously fluorinated benzaldehydes and different anilines or chiral benzylamines were synthesized by a solvent-free mechanochemical method, which was based on the manual grinding of equimolar amounts of the substrates at the room temperature. In a very short reaction time of only 15 min, the method produced the expected products with good-to-excellent yields. The yields were comparable or significantly higher than those reported in the literature for the imines synthesized by other methods. Importantly, the conditions used for the reactions with aniline derivatives also resulted in the high yields of imines obtained from chiral benzylamines, and can be extended to the synthesis with other similar amines. Structures of all imines were confirmed by NMR spectroscopy: 1H, 13C and 19F. For four compounds, X-ray structures were also obtained. The synthetic approach presented in this paper contributes to the prevention of environmental pollution and can be easily extended for larger-scale syntheses. The mechanochemical solvent-free method provides a convenient strategy particularly useful for the preparation of fluorinated imines being versatile intermediates or starting material in the synthesis of drugs and other fine chemicals.

Synthesis and Characterization of Lanthanide Metal Ion Complexes of New Polydentate Hydrazone Schiff Base Ligand.

The new homodinuclear complexes of the general formula [Ln2L3(NO3)3] (where HL is newly synthesized 2-((2-(benzoxazol-2-yl)-2-methylhydrazono)methyl)phenol and Ln = Sm3+ (1), Eu3+ (2), Tb3+ (3a, 3b), Dy3+ (4), Ho3+ (5), Er3+ (6), Tm3+ (7), Yb3+ (8)), have been synthesized from the lanthanide(III) nitrates with the polydentate hydrazone Schiff base ligand. The flexibility of this unsymmetrical Schiff base ligand containing N2O binding moiety, attractive for lanthanide metal ions, allowed for a self-assembly of these complexes. The compounds were characterized by spectroscopic data (ESI-MS, IR, UV/Vis, luminescence) and by the X-ray structure determination of the single crystals, all of which appeared to be different solvents. The analytical data suggested 2:3 metal:ligand stoichiometry in these complexes, and this was further confirmed by the structural results. The metal cations are nine-coordinated, by nitrogen and oxygen donor atoms. The complexes are two-centered, with three oxygen atoms in bridging positions. There are two types of structures, differing by the sources of terminal (non-bridging) coordination centers (group A: two ligands, one nitro anion/one ligand, two nitro anions, group B: three ligands, three anions).

Toward Electrochromic Metallopolymers: Synthesis and Properties of Polyazomethines Based on Complexes of Transition-Metal Ions.

The tridentate ligand L and its complexes with transition-metal ions have been prepared and characterized. The polycondensation reactions of transition-metal complexes with different dialdehydes led to the formation of transition-metal-complex-based polyazomethines, which have been obtained by on-substrate polymerization, and their electrochemical and electrochromic performance have been investigated. The most interesting properties are exhibited by polymers of Fe(II) and Cu(II) ions obtained by the reaction of the appropriate complexes with a triphenylamine-based dialdehyde. Fe(II) polymer P1 undergoes a reversible oxidation/reduction process and a color change from orange to gray due to the oxidation of Fe(II) to Fe(III) ions concomitant with the oxidation of the triphenylamine group. Its electrochromic properties such as long-term stability, switching times, and coloration efficiencies have been investigated, providing evidence of the utility of the on-substrate polycondensation reaction in the formation of thin films of electrochromic metallopolymers.

Synthesis and Spectroscopic Investigation of a Hexaaza Lanthanum(III) Macrocycle with a Hybrid-Type G4 DNA Stabilizing Effect.

Herein we present a mononuclear lanthanum(III) complex obtained in a template cyclocondensation reaction of lanthanum(III) nitrate salt, 1,2-propanediamine, and 2,6-diacetylpyridine (LaPA complex). A preliminary investigation of the biological potential of this compound was conducted using a biomedically relevant target Tel26. We found that, different from parallel G4, antiparallel G4, and duplex DNA, only a hybrid-type G4 structure of Tel26 in a K+ solution was significantly stabilized by ≥7 °C, which emerged in our UV melting studies. Moreover, LaPA induced structural changes in the Tel26 structure in a K+-deprived solution, suggesting that it may also lead to conformational changes in "non-G4" telomeric DNA.

Weak Intermolecular Interactions in a Series of Bioactive Oxazoles.

The intermolecular interactions in a series of nine similar 4,5-phenyl-oxazoles were studied on the basis of crystal structures determined by X-ray diffraction. The crystal architectures were analyzed for the importance and hierarchies of different, weak intermolecular interactions using three approaches: the geometrical characteristics, topological analysis (for the model based on the transfer of multipolar parameters), and energetics of the molecule-molecule interactions. The geometries of the molecules were quite similar and close to the typical values. The results of the analysis of the interactions suggest that the number of nonspecific interactions is more important than the apparent strength of the specific interactions. The interactions involving covalently bound bromine and divalent sulfur atoms were classified as secondary, they certainly did not define the crystal packing, and they played a minor role in the overall crystal cohesion energies. Incidentally, another method for confirming the degree of isostructurality, according to the topologies of the interactions, is described.

Synthesis of Silsesquioxanes with Substituted Triazole Ring Functionalities and Their Coordination Ability.

A synthesis of a series of mono-T8 and difunctionalized double-decker silsesquioxanes bearing substituted triazole ring(s) has been reported within this work. The catalytic protocol for their formation is based on the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) process. Diverse alkynes were in the scope of our interest-i.e., aryl, hetaryl, alkyl, silyl, or germyl-and the latter was shown to be the first example of terminal germane alkyne which is reactive in the applied process' conditions. From the pallet of 15 compounds, three of them with pyridine-triazole and thiophenyl-triazole moiety attached to T8 or DDSQ core were verified in terms of their coordinating properties towards selected transition metals, i.e., Pd(II), Pt(II), and Rh(I). The studies resulted in the formation of four SQs based coordination compounds that were obtained in high yields up to 93% and their thorough spectroscopic characterization is presented. To our knowledge, this is the first example of the DDSQ-based molecular complex possessing bidentate pyridine-triazole ligand binding two Pd(II) ions.

Microwave-Accelerated C,N-Cyclometalation as a Route to Chloro-Bridged Iridium(III) Binuclear Precursors of Phosphorescent Materials: Optimization, Synthesis, and Studies of the Iridium(III) Dimer Behavior in Coordinating Solvents.

We present the results of our research on the use of microwaves as an unconventional heat source for the acceleration of iridium(III) chloro-bridged dimer preparation. The results enabled us to revise and improve known guidelines for the very quick and highly efficient synthesis of iridium(III) dimeric complexes in a very simple isolation manner. According to the developed methodology, the already known dimers containing ligands based on the 2-phenylpyridinato motif, as well as new ones stabilized with functionalized benzo[h]quinolinato and 2-phenoxypyridinato-based ligands, were efficiently synthesized. The scope of the incorporated ligands included compounds equipped with electron-donating (-Me, -OMe, -OPh, -NMe2), electron-withdrawing (-F, -Br, -CF3, -C6F5), and hole-transporting (-NPh2, -C6H4NPh2) groups. The obtained complexes were characterized by NMR, X-ray diffraction, and electrospray ionization mass spectrometry methods, and their behavior was examined in the presence of coordinating solvents such as dimethyl sulfoxide and acetonitrile. Investigation of the interactions between the above-mentioned solvents and dimers enabled us to confirm the ability of the former to cleave µ-chloride bridges, which enriches the knowledge in the field of organometallic chemistry. This knowledge can be particularly useful for the scientists working in the field of iridium-based materials, helping to avoid misinterpretation of the spectroscopic data.

Intramolecular Ring-Expansion Reaction (RER) and Intermolecular Coordination of In Situ Generated Cyclic (Amino)(aryl)carbenes (cAArCs).

Cyclic (amino)(aryl)carbenes (cAArCs) based on the isoindoline core were successfully generated in situ by α-elimination of 3-alkoxyisoindolines at high temperatures or by deprotonation of isoindol-2-ium chlorides with sodium or copper(I) acetates at low temperatures. 3-Alkoxy-isoindolines 2 a,b-OR (R=Me, Et, iPr) have been prepared in high yields by the addition of a solution of 2-aryl-1,1-diphenylisoindol-2-ium triflate (1 a,b-OTf; a: aryl=Dipp=2,6-diisopropylphenyl; b: Mesityl-, Mes=2,4,6-trimethylphenyl) to the corresponding alcohol (ROH) with NEt3 at room temperature. Furthermore, the reaction of 2 a,b-OMe in diethyl ether with a tenfold excess of hydrochloric acid led to the isolation of the isoindol-2-ium chlorides 1 a,b-Cl in high yields. The thermally generated cAArC reacts with sulfur to form the thioamide 3 a. Without any additional trapping reagent, in situ generation of 1,1-diphenylisoidolin-3-ylidenes does not lead to the isolation of these compounds, but to the reaction products of the insertion of the carbene carbon atom into an ortho C-H bond of a phenyl substituent, followed by ring-expansion reaction; namely, anthracene derivatives 9-N(H)aryl-10-Ph-C14 H8 4 a,b (a: Dipp; b: Mes). These compounds are conveniently synthesized by deprotonation of the isoindol-2-ium chlorides with sodium acetate in high yields. Deprotonation of 1 a-Cl with copper(I) acetate at low temperatures afforded a mixture of 4 a and the corresponding cAArC copper(I) chloride 5 a, and allowed the isolation and structural characterization of the first example of a cAArC copper complex of general formula [(cAArC)CuCl].

Relations between Structural and Luminescence Properties of Novel Lanthanide Nitrate Complexes with Bis-phosphoramidate Ligands.

Five new bisphosphoramide-based LnIII nitrate complexes [La2(NO3)6L3I] n (1), [Ce2(NO3)6L3I] n (2), [Sm2(NO3)6L3II] n (3), Sm2(NO3)6L3III (4), and Er(NO3)3L2III (5) [LI = piperazine-1,4-diylbis(diphenyl phosphine oxide), LII = N, N'-(ethane-1,2-diyl)bis( N-methyl- P, P-diphenylphosphinic amide, and LIII = N, N'-(ethane-1,2-diyl)bis( P, P-diphenylphosphinic amide)] have been synthesized and characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis (TGA), and single crystal X-ray and powder diffractions. The results of the X-ray diffraction analysis revealed the new polymorph of LIII, and the structural diversity of the synthesized complexes in the solid state. Complexes 1-3 display two-dimensional coordination polymers (2D-CP), containing layers with honeycomb (6, 3) topology. In these 2D-CPs, each Ln center (La, Ce, and Sm in 1, 2, and 3, respectively) could be considered as a triconnected node, linked by three bridging bisphosphoramide ligands as two-connecting linkers. In contrast, 4 is a discrete binuclear complex, in which bidentate LIII ligand has two entirely different conformations: the syn chelating and the anti bridging. Cationic complex 5 shows the monomeric structure, where bidentate LIII adopts the syn-chelating conformation. A comprehensive luminescence investigation has been performed on free ligands and their corresponding complexes as well. The synthesized compounds display a variety of luminescence behavior, including the ligand-centered fluorescence in 1, 2, and 5, two distinct emission peaks in 1 and 2, characteristic Sm-centered f-f emission in 3 and 4, and excitation-dependent emission in LIII, 1, and 2. Furthermore, the time-dependent density functional theory (TD-DFT) study was carried out on the reported compounds to understand the nature of the emission peaks and the observed luminescence properties. The solid-state emission quantum yields of lanthanide complexes were also determined at different excitation wavelengths.

Effect of ß-Ketoiminato Ancillary Ligand Modification on Emissive Properties of New Iridium Complexes.

A series of new bis(benzo[h]quinolinato) Ir(III) complexes with modified ß-ketoiminato ancillary ligands were synthesized, and their electrochemical, photophysical properties were determined with the support of theoretical calculations. Moreover, all the synthesized heteroleptic Ir(III) complexes were examined as dopants of the host-guest type emissive layers in solution-processed phosphorescent organic light emitting diodes (PhOLEDs) of a simple structure. As expected on the basis of voltammetry measurements as well as DFT calculations, all the compounds appeared to be green emitters. Their examination showed that alteration of ß-ketoiminato ligand structure causes frontier orbitals' energy levels to be slightly changed, while significantly affecting photoluminescence and electroluminescence efficiencies of iridium phosphors containing these ligands. It was also found that modification of ancillary ligands might enhance charge trapping on the dopant, thus increasing its efficiency, especially in electroluminescence. From among the iridium complexes studied, the compound bearing 1-naphthyl group bonded to the nitrogen atom of the ancillary ligand proved to be the most efficient emitter. The PhOLED fabricated on the basis of this dopant has reached a luminance level of 16000 cd/m2, current efficiency close to 12 cd/A, and an external quantum efficiency around 3.2%.

New Artificial Biomimetic Enzyme Analogues based on Iron(II/III) Schiff Base Complexes: An Effect of (Benz)imidazole Organic Moieties on Phenoxazinone Synthase and DNA Recognition.

Elucidation of the structure and function of biomolecules provides us knowledge that can be transferred into the generation of new materials and eventually applications in e.g., catalysis or bioassays. The main problems, however, concern the complexity of the natural systems and their limited availability, which necessitates utilization of simple biomimetic analogues that are, to a certain degree, similar in terms of structure and thus behaviour. We have, therefore, devised a small library of six tridentate N-heterocyclic coordinating agents (L1-L6), which, upon complexation, form two groups of artificial, monometallic non-heme iron species. Utilization of iron(III) chloride leads to the formation of the 1:1 (Fe:Ln) 'open' complexes, whereas iron(II) trifluoromethanosulfonate allows for the synthesis of 1:2 (M:Ln) 'closed' systems. The structural differences between the individual complexes are a result of the information encoded within the metallic centre and the chosen counterion, whereas the organic scaffold influences the observed properties. Indeed, the number and nature of the external hydrogen bond donors coming from the presence of (benz)imidazole moieties in the ligand framework are responsible for the observed biological behaviour in terms of mimicking phenoxazinone synthase activity and interaction with DNA.

Symmetrical imidazolium chloride based on (-)-menthol: synthesis, characterization, and theoretical model of the reaction.

New symmetrical imidazolium chloride from a natural chiral pool of (1R,2S,5R)-(-)-menthol can be efficiently prepared by two different methods. The first method involves a specific type of Menschutkin reaction using novel 1-(1R,2S,5R)-(-)-menthoxymethylimidazole as amine, chloromethyl (1R,2S,5R)-(-)-menthyl ether as quaternization agent, and hexane as solvent. In the second method, imidazole, chloromethyl (1R,2S,5R)-(-)-menthyl ether, and DMF are used. To understand this specific type of the reaction, quantum chemical calculations at the DFT level have been used. The preparation and characterization of 1,3-bis[(1R,2S,5R)-(-)-menthoxymethyl]imidazolium chloride are reported.

New aryloxybenzylidene ruthenium chelates - synthesis, reactivity and catalytic performance in ROMP.

New phenoxybenzylidene ruthenium chelates were synthesised from the second generation Grubbs catalysts bearing a triphenylphosphine ligand (or its para-substituted analogues) by metathesis exchange with substituted 2-vinylphenols. The complexes behave like a latent catalyst and are characterized by an improved catalytic behaviour as compared to that of the known analogues, i.e., they exhibit high catalytic inactivity in their dormant forms and a profound increase in activity after activation with HCl. The strong electronic influence of substituents in the chelating ligand on the catalytic activity was demonstrated. The catalytic properties were tested in ROMP of cyclooctadien (COD) and a single selected norbornene derivative.

Silylative coupling versus metathesis--efficient methods for the synthesis of difunctionalized double-decker silsesquioxane derivatives.

A series of functionalized dialkenylsilsesquioxanes were obtained by efficient and highly stereoselective silylative coupling and cross-metathesis of divinylsubstituted double-decker silsesquioxanes (DDSQ-2SiVi) with substituted styrenes and other olefins. Both reactions proceed highly stereoselectively and lead to nearly quantitative formation of E isomers. The optimized reaction conditions for styrene were adopted for successful silylative coupling polycondensation of DDSQ-2SiVi with 1,4-divinylbenzene yielding stereoregular cooligomer containing double-decker (silsesquioxyl-silylene)-vinylene-phenylene units.

Solvent-Free and Efficient Synthesis of Silatranes via an Organocatalytic Protocol under Mild Conditions.

The organocatalytic approach to the formation of silatranyl cages permitted the design of a solvent-free and efficient protocol for the preparation of various organosilatranes. We discovered that amidine derivatives efficiently catalyze the conversion of trialkoxysilanes into organosilatranes, and their catalytic activity is related to the pKBH+ values. NMR studies of equimolar reactions of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) with selected substrates allowed proposing a reliable scheme for the transesterification process and silatranyl cage formation. In addition, green chemistry metrics for the scaled-up synthesis of vinylsilatrane (3k) were appointed. Finally, a scheme for the industrial production of silatrane derivatives with DBU and solvent regeneration was proposed, supported by a catalyst recycling experiment.