Analytical application of nano-sized titanium dioxide for the determination of trace inorganic antimony in natural waters.

In this work, solid phase extraction (SPE) using nano-sized TiO2 as a solid sorbent was used for separation/preconcentration of total inorganic antimony (iSb) before its determination by electrothermal atomic absorption spectrometry (ETAAS). After adsorption of iSb onto nano-sized TiO2, direct TiO2-slurry sampling was used for sample injection into a graphite tube. The conditions for the reliable slurry sampling together with careful control of the temperature program for the slurry solutions were worked out. Extraction conditions for both inorganic antimony species (Sb(III) and Sb(V)) and interference studies of coexisting ions were studied in detail. The accuracy of the optimized method was checked by the certified reference material (CRM) for trace elements in lake water TMDA-61. Finally, the optimized method was used for the determination of trace inorganic antimony in synthetic and natural waters.

Optimization of determination of platinum group elements in airborne particulate matter by inductively coupled plasma mass spectrometry.

Determination of automotive traffic-emitted platinum group metals (PGM) by inductively coupled plasma quadrupole mass spectrometry (ICP-MS) was optimized. The interferences from Sr, Cu, Pb, Y, Cd, Zr and Hf were evaluated using model solutions. Plasma radiofrequency (RF) power and nebulizer gas flow were optimized for 103Rh, 105Pd, 108Pd and 195Pt. Two standard reference materials were analyzed: SARM-7 Platinum ore and BCR-723 Road dust. The optimized procedure was used to analyze samples of airborne particulate matter collected in the urban site with heavy automotive traffic in the centre of Bratislava, Slovakia.

Complexation of labile aluminium species by chelating resins Iontosorb--a new method for Al environmental risk assessment.

The utilization of chelating ion-exchange by the method based on binding strength and kinetic discrimination for aluminium fractionation was studied. Two chelating cellulose resins, Iontosorb Oxin (IO) and Iontosorb Salicyl (IS), were used for the determination of quickly reacting labile aluminium species. The possibilities of aluminium fractionation on these chelating resins were investigated by a solid phase extraction technique. The study of the pH (2.5-6.0) influence on the Al complexation by both resins indicates that at low pH the IS has lower sorption capacity but better adsorptive kinetic properties than IO. The optimal resin complexation time for reactive Al species was experimentally found after aluminium sorption study at pH 4.0 in synthetic solutions containing some inorganic and organic ligands, which simulate the composition of analysed acid soil and water samples. The negative influence of sulphate and iron on the Al complexation by IS resin was found and investigated. The flame atomic absorption spectrometry was used for the aluminium quantification.

Reconstruction of dietary habits on the basis of dental microwear and trace elements analysis of individuals from Gán cemetery (district Galanta, Slovakia).

The aim of the study was to determine the diet of a historical human population. Dental microwear and trace elements were analyzed. Although 38 individuals had been buried in the cemetery, only 13 of them were suitable for the analysis of trace elements and 17 skeletal remains for microwear analysis. Buccal microwear has been studied in a sample of 17 teeth from Gán cemetery. Teeth molds of the buccal surface were obtained and observed at 120x magnification with a scanning electron microscope (SEM). Length and orientation of each striation have been determined with a SigmaScan Pro 5.0 image analysis program. The results of the analysis from Gán were compared with the previous study in a sample of 153 molar teeth from different modern hunter-gatherer, pastorals, and agriculturalist groups, with different diets (Inuit, Fueguians, Bushmen, Australian aborigines, Andaman's, Indians from Vancouver, Veddahs, Tasmanians, Lapps, and Hindus), preserved at museum collections. Buccal dental microwear density and length by orientation showed almost an inclination to hunter-gatherers from tropic and arid climates. The sample for the trace elements analysis consisted of 10 permanent molars and 3 permanent premolars. All analyzed teeth were intact, with fully developed roots, without dental caries, calculus and abrasion. Samples were analyzed using the method of optical emission spectrometry with inductively coupled plasma. Three elements: Ca, Sr, and Zn were chosen as basic diet determinants. Concentrations of these elements and their ratios were used for description of a relative proportion of plant and animal protein in a diet. The values of the Sr and Zn concentrations indicate that a diet of investigated population was rich in plant food. Higher Sr values in women can indicate lower proportion of animal protein in a diet, but significant differences have not been found. Differences between non-adult and adult individuals and between individuals with and without grave furnishings have also not been significant.

Determination of trace amounts of total dissolved cationic aluminium species in environmental samples by solid phase extraction using nanometer-sized titanium dioxide and atomic spectrometry techniques.

Nanometer-sized titanium dioxide was used as a solid-phase extractant for the separation and preconcentration of trace amounts of Al(III) prior to its determination by electrothermal atomic absorption spectrometry (ET AAS) and inductively coupled plasma optical emission spectrometry (ICP OES). The optimal conditions for the proposed solid phase extraction (SPE; 50mg TiO(2), 10 min extraction time, pH 6.0, HCl and HNO(3) as eluents) and ET AAS measurement (1500 degrees C pyrolysis and 2600 degrees C atomization temperatures, Mg(NO(3))(2) as matrix modifier) were obtained. The adsorption capacity of TiO(2) was 4.1mg Al g(-1) TiO(2). Two modes of the proposed procedure were compared, (I) batch and elution mode with the elution of Al from TiO(2) phase by nitric or hydrochloric acid, and (II) batch and slurry mode (without elution) with the direct TiO(2) phase-slurry sampling. Finally, the batch and slurry mode of nanometer-sized TiO(2) SPE with slurry ET AAS detection and quantification was preferred and used for the determination of trace amounts of total dissolved cationic Al species in synthetic and natural water samples. The method accuracy was checked by the analysis of lake water CRM TMDA-61 and by the technique of analyte addition (sample spiking). Under the optimal conditions, the calibration curve for batch and slurry TiO(2) SPE with a 10-fold preconcentration was linear up to 40 microg L(-1) Al. The limit of detection (LOD) and the limit of quantification (LOQ) was 0.11 microg L(-1) Al and 0.35 microg L(-1) Al, respectively, with a preconcentration factor of 20 and a relative standard deviation (RSD) lower than 5%.

Utilization of optimized BCR three-step sequential and dilute HCl single extraction procedures for soil-plant metal transfer predictions in contaminated lands.

The prediction of soil metal phytoavailability using the chemical extractions is a conventional approach routinely used in soil testing. The adequacy of such soil tests for this purpose is commonly assessed through a comparison of extraction results with metal contents in relevant plants. In this work, the fractions of selected risk metals (Al, As, Cd, Cu, Fe, Mn, Ni, Pb, Zn) that can be taken up by various plants were obtained by optimized BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and by single 0.5 mol L(-1) HCl extraction. These procedures were validated using five soil and sediment reference materials (SRM 2710, SRM 2711, CRM 483, CRM 701, SRM RTH 912) and applied to significantly different acidified soils for the fractionation of studied metals. The new indicative values of Al, Cd, Cu, Fe, Mn, P, Pb and Zn fractional concentrations for these reference materials were obtained by the dilute HCl single extraction. The influence of various soil genesis, content of essential elements (Ca, Mg, K, P) and different anthropogenic sources of acidification on extraction yields of individual risk metal fractions was investigated. The concentrations of studied elements were determined by atomic spectrometry methods (flame, graphite furnace and hydride generation atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry). It can be concluded that the data of extraction yields from first BCR SEP acid extractable step and soil-plant transfer coefficients can be applied to the prediction of qualitative mobility of selected risk metals in different soil systems.

Comparison of element levels in minimal and complex yeast media.

The cellular functions are strongly influenced by the composition of the environment. In particular, phenotypes of microbial strains are modulated by concentrations of ions in the culture medium, and differences in element levels may be responsible for a phenotypic variability observed when microbial strains are grown on synthetic versus complex media. In this report, we analyzed the levels of nine elements (magnesium, potassium, sodium, calcium, iron, copper, manganese, zinc, and phosphorus) and sulphate ions in commercially available peptone and yeast extract and compared them with those in yeast nitrogen base routinely used for preparation of synthetic minimal media. We observed that whereas some elements are present at similar levels, the levels of others differ by a factor as high as 20. The observed differences should be taken into account when interpreting different phenotypes observed for microbial strains grown on synthetic versus complex media.

Complexation efficiency of differently fixed 8-hydroxyquinoline and salicylic acid ligand groups for labile aluminium species determination in soils--comparison of two methods.

Two methods utilizing the complexation of labile Al species by 8-hydroxyquinoline (HQN) and salicylic acid (SA) ligand groups were developed for aluminium operationally defined fractionation in acid soils. First, the solid phase extraction (SPE) procedure by a short-term ion-exchange batch reaction with chelating resins Iontosorb Oxin and Iontosorb Salicyl containing both ligand groups was used previously. Second, the 8-hydroxyquinoline, salicylic acid and ammonium salicylate agents with different concentrations by a single extraction protocol were applied in this paper. The flame atomic absorption spectrometry (FAAS) and optical emission spectrometry with inductively coupled plasma were used for aluminium quantification. The comparison of results from both methods show the possibility to supersede the first laborious method for the second simpler one in Al environmental risk assessment. The use of 1% 8-hydroxyquinoline in 2% acetic acid and 0.2% salicylic acid by a single extraction protocol without a need of sample filtration can supersede the SPE procedure in the Al pollution soil monitoring. Finally, the new scheme usable in a laboratory and moreover, directly in a field was proposed for Al fractionation in solid and liquid environmental samples. The labile Al species in soils and sediments are separated after their single leaching by 8-hydroxyquinoline or salicylic acid without a need of sample filtration. The labile Al species in soil solutions and natural waters are separated after their ultrafiltration followed by the SPE procedure with Iontosorb Oxin or Iontosorb Salicyl.

Free aluminium extraction from various reference materials and acid soils with relation to plant availability.

The single extractions with 15 extractants (agents) (H(2)O, KCl, NH(4)Cl, NH(4)F, CaCl(2), BaCl(2), CuCl(2), LaCl(3), Na(2)S(2)O(4), (NH(4))(2)C(2)O(4), Na(4)P(2)O(7), NTA, EDTA, DTPA, HCl), the optimised BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and the solid phase extraction (SPE) by the chelating ion-exchanger Iontosorb Salicyl (cellulose resin containing covalently bound salicylic acid functional groups) were used for the partitioning of Al in very acid soil samples taken from an area influenced by acid mine solutions. The precision, accuracy and repeatibility for all steps of the optimised BCR SEP were checked on the various reference materials (CRM 483 sewage sludge amended soil, CRM BCR 701 freshwater sediment, SRM 2710 and SRM 2711 Montana soils). Also the new indicative values of the optimised BCR SEP fractional Al concentrations were obtained for these reference materials. The aluminium amounts obtained by the used extraction procedures were valuated and discussed from the aspect of the Al concentration in the plants (grass) growing on the same studied soils. The aluminium toxicity indexes (ATI) calculated for the studied soils, the BaCl(2) and acetic acid soil extracts and the grass stems and roots were used for the assessment of the Al toxicity to the plants. The ATI value was defined as the ratio of the nutrient cations (Ca, Mg, K, Na) concentration sum to the Al concentration. The flame atomic absorption spectrometry (LOQ=0.2mgl(-1)) and the inductively coupled plasma optical emission spectrometry (LOQ=0.03mgl(-1)) were used for the aluminium quantification.

Silvery mole-rats ( Heliophobius argenteocinereus, Bathyergidae) change their burrow architecture seasonally.

Little is known about seasonal changes in burrowing activity and burrow architecture in subterranean African mole-rats (Bathyergidae, Rodentia). The solitary genus Heliophobius is the least known genus of this family. We examined burrow systems of the silvery mole-rat (Heliophobius argenteocinereus) in Malawi in two periods of the dry season. Burrow pattern was influenced by the time of the year, becoming more reticulated at the peak of the dry season when soil was dry and hard. Overall digging activity did not cease during the dry season; yet burrowing strategy changed and the soil was deposited in tunnels rather than transported to mounds. The length of burrow systems was correlated with the body mass of the respective occupants. In spite of their solitary habits--and contrary to the prediction of the aridity food-distribution hypothesis--silvery mole-rats are able to occupy poor habitats with low food supply.

Determination of trace amounts of gold in acid-attacked environmental samples by atomic absorption spectrometry with electrothermal atomization after preconcentration.

A method for determination of trace amounts of gold in environmental samples (rocks, soils, sediments, and waters) by atomic absorption spectrometry with electrothermal atomization (ETAAS) after preconcentration using a chelating sorbent Spheron Thiol 1000 is described. The method accurately determines gold between 0.001 and several tens of grams per ton in samples having complex variations in mineralogy. Pulverized samples are roasted at 650 degrees C to oxidize any sulfide and/or carbonaceous material. Samples are then subjected to a series of acid treatments to eliminate any silica matrix and to dissolve the sample. The Spheron Thiol 1000 is added to the sample solution, and then with sorbed gold is filtered out, washed, and ignited at 550 degrees C. The residue is dissolved in aqua regia, evaporated, dissolved in distilled water, transferred to a volumetric flask, and analyzed by ETAAS. The limits of detection of gold, based on the 3 sigma definition, were 0.5 ng g(-1) for 10-g samples (rocks, sediments, soils) and 0.05 ng mL(-1) for 1-L water samples. Precision of determination expressed by the relative standard deviation varied from 2.9% to 16.4%. The accuracy of the method is verified by analysis of certified reference materials. The obtained analytical results are in good agreement with attested values. The developed method was applied for gold determination in environmental samples affected by the acidification (acid mine drainage which is mainly a product of pyrite oxidation) from an open quartzite mine in the Sobov region situated NE of the city of Banská Stiavnica (Slovakia).

Effect of cyclosporin A in Lewis rats in vivo and HeLa cells in vitro.

The aim of this study was to compare the effect of cyclosporin A (CsA) in inbred Lewis rats with published assessment of immunotoxicity in 'classical' outbred Wistar rats. A second purpose was to consider the contribution of a panel of in vitro assays in cell cultures when added to an immunotoxicity study in vivo. The in vivo effect of CsA was investigated in a 28-day subacute immunotoxicity study in male Lewis rats at three different concentrations: 1.25, 5 and 20 mg kg(-1). The highest dose of CsA exceeded the maximum tolerated dose. A drop in body, spleen and popliteal lymph node weight of exposed animals displayed symptoms of toxicity. At a high toxic dose, haematological changes showed a decrease in the leucocyte count and in the percentage of lymphocytes, and an increase in the percentage of polymorphonuclear leucocytes. The haematocrit was significantly dose-dependently suppressed in all rats exposed to CsA. A similar dose-dependent depression of the mean cell volume of erythrocytes was found in rats given high and middle doses of CsA. The phagocytic activity of polymorphonuclear leucocytes and monocytes also was significantly dose-dependently suppressed. No significant changes in primary antibody response to sheep erythrocytes or in vitro proliferative response of spleen lymphocytes to mitogens were found in those rats.A battery of in vitro cytotoxicity methods was selected for the evaluation of metabolic and functional activity of subcellular organelles (mitochondria, lysosomes) and for the detection of drug-induced superoxide-mediated damage in HeLa cells. This cell line was chosen because it has a lower activity of superoxide dismutase (SOD) than normal cells and is sufficiently sensitive for the detection of the induction of oxygen radicals. The in vitro results indicated a direct relationship between CsA cytotoxicity and a change in the mitochondrial enzyme activity, as well as an induction of superoxide production. The results of the study indicated that a combination of selected in vivo and in vitro methods is an inexpensive way to obtain more complex information on cell status affected by xenobiotics.

Chemical partitioning of aluminium in rocks, soils, and sediments acidified by mining activity.

The work presented describes the application of different analytical approaches for study of aluminium mobility in rock, soil, and sediment samples affected by mining activity (secondary quartzites with sulfidic deposits). For this purpose we used a combination of the single extractions, the optimized BCR three-step sequential extraction procedure (SEP), and reactive aluminium determination after chelating ion-exchange on Ostsorb (Iontosorb) Salicyl by a batch technique with flame atomic absorption spectrometry quantification. The single extraction agents H(2)O, KCl, NH(4)Cl, and BaCl(2) were found to be the best for the quantitative estimation of the aluminium mobility in rocks, soils, and sediments caused by acidification of the environment. This fact was confirmed by reactive aluminium determination in the same samples. The vast majority of the aluminium content of samples after application of the optimized BCR three-step SEP is in the residues. The available fraction of aluminium extracted by dilute CH(3)COOH in the first step of this procedure correlates with the reactive aluminium content. The amounts of aluminium released in the second and the third steps and the sums from steps 1-3 of this procedure are closely associated with the aluminium content values obtained by the single dilute HCl leach. The accuracy of results obtained was verified with only informative values for individual fractions of the BCR three-step SEP because of the absence of suitable certified or standard reference materials. The amounts of the reactive aluminium determined in samples was in the range 12-82% of total soluble Al in the filtered H(2)O extracts. It was confirmed that the acidified polluted samples contain the most of reactive Al content, which is responsible for its toxicity.