A Phosphoramidate Prodrug Platform: One-Pot Amine Functionalization of Kinase Inhibitors with Oligoethylene Glycol for Improved Water-Solubility.

Small molecular kinase inhibitors play a key role in modern cancer therapy. Protein kinases are essential mediators in the growth and progression of cancerous tumors, rendering involved kinases an increasingly important target for therapy. However, kinase inhibitors are almost insoluble in water because of their hydrophobic aromatic nature, often lowering their availability and pharmacological efficacy. Direct drug functionalization with polar groups represents a simple strategy to improve the drug solubility, availability, and performance. Here, we present a strategy to functionalize secondary amines with oligoethylene glycol (OEG) phosphate using a one-step synthesis in three exemplary kinase inhibiting drugs Ceritinib, Crizotinib, and Palbociclib. These OEG-prodrug conjugates demonstrate superior solubility in water compared to the native drugs, with the solubility increasing up to 190-fold. The kinase inhibition potential is only slightly decreased for the conjugates compared to the native drugs. We further show pH dependent hydrolysis of the OEG-prodrugs which releases the native drug. We observe a slow release at pH 3, while the conjugates remain stable over 96 h under physiological conditions (pH 7.4). Using confocal microscopy, we verify improved cell uptake of the drug-OEG conjugates into the cytoplasm of HeLa cells, further supporting our universal solubility approach.

Revealing the Origin of Fast Delayed Fluorescence in a Donor Functionalized Bisterpyridine.

A new carbazole-substituted bisterpyridine with pronounced delayed fluorescence is presented. While the molecular donor-acceptor-donor design suggests the origin of this to be thermally activated delayed fluorescence (TADF), results from various photophysical characterizations, OLED characteristics, temperature-dependent NMR spectroscopy, and DFT calculations all point against the involvement of triplet states. The molecule exhibits blue emission at about 440 nm with two or more fast decay channels in the lower nanosecond range in both solution and thin films. The delayed emission is proposed to be caused by rotational vibrational modes. We suggest that these results are generally applicable, especially for more complex molecules, and should be considered as alternative or competitive emissive relaxation pathways in the field of organic light emitting materials.

Dihedral angles and photoluminescence quantum yields: an NMR analysis.

The synthesis of two different series of donor-acceptor (D-A) molecules is reported, consisting of a series of four structurally related donors and two different acceptors. The subtle differences in the electron density of these D-A-D and D-A compounds are clearly reflected in the different chemical shifts of certain donor protons in the 1H NMR spectra. These shifts show a cosine squared correlation of the dihedral angle between the donor units and the neighbouring phenyl unit of the acceptor. This correlation is also related to optical properties such as the photoluminescence quantum yield, which shows a similar trend due to the different degree of charge transfer during excitation and relaxation processes. In this way, it is possible to directly correlate a molecular structural parameter with a material property on a purely experimental basis, which should be applicable to many donor-acceptor systems.

Water-Soluble Trityl Radicals for Fluorescence Imaging.

Stable tris(trichlorophenyl)methyl radicals have gained interest as all-organic bioimaging agents combining fluorescent and paramagnetic properties. However, cellular uptake has so far only been reported for nanoparticles, because molecular hydrophobic trityl radicals are not soluble in aqueous media. Here, we report the synthesis and characterization of new water-soluble tris(trichlorophenyl)methyl radical derivatives exhibiting red doublet emission. Solubility in water is achieved through functionalization with oligoethylene glycol (OEG) chains. The emission behavior of OEG functionalized trityl radicals is studied in polar environments. Donor-functionalization with carbazole evokes a charge-transfer excited state that is efficiently quenched in polar solvents. In contrast, click-reaction mediated attachment of OEG-azide and trityl acetylene furnishes a triazole functionalized radical with locally excited states and emission in water. Confocal fluorescence microscopy proves successful uptake of the material by macrophages in cell culture, showing the potential of our water soluble trityl radical for fluorescence bioimaging.

A Stable Chichibabin Diradicaloid with Near-Infrared Emission.

Conjugated molecules with multiple radical centers such as the iconic Chichibabin diradicaloid hold promise as building blocks in materials for quantum sensing and quantum information processing. However, it is a considerable challenge to design simple analogues of the Chichibabin hydrocarbon that are chemically inert, exhibit high diradical character and emit light at a distinct wavelength that may offer an optical readout of the spin state in functional ensembles. Here we describe the serendipitous discovery of the stable TTM-TTM diradicaloid, which exhibits high diradical character, a striking sky-blue color and near-infrared (NIR) emission (in solution). This combination of properties is unique among related diradicaloids and is due to the presence of hydrogen and chlorine atoms in "just the right positions", allowing a perfectly planar, yet predominantly benzenoid bridge to connect the two sterically stabilized radical centers. In-depth studies of the optical and magnetic properties suggest that this structural motif could become a mainstay building block of organic spin materials.

Combining Deep Eutectic Solvents with TEMPO-based Polymer Electrodes: Influence of Molar Ratio on Electrode Performance.

For sustainable energy storage, all-organic batteries based on redox-active polymers promise to become an alternative to lithium ion batteries. Yet, polymers contribute to the goal of an all-organic cell as electrodes or as solid electrolytes. Here, we replace the electrolyte with a deep eutectic solvent (DES) composed of sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) and N-methylacetamide (NMA), while using poly(2,2,6,6-tetramethylpiperidin-1-yl-oxyl methacrylate) (PTMA) as cathode. The successful combination of a DES with a polymer electrode is reported here for the first time. The electrochemical stability of PTMA electrodes in the DES at the eutectic molar ratio of 1 : 6 is comparable to conventional battery electrolytes. More viscous electrolytes with higher salt concentration can hinder cycling at high rates. Lower salt concentration leads to decreasing capacities and faster decomposition. The eutectic mixture of 1 : 6 is best suited uniting high stability and moderate viscosity.

Varying the Stiffness and Diffusivity of Rod-Shaped Microgels Independently through Their Molecular Building Blocks.

Microgels are water-swollen, crosslinked polymers that are widely used as colloidal building blocks in scaffold materials for tissue engineering and regenerative medicine. Microgels can be controlled in their stiffness, degree of swelling, and mesh size depending on their polymer architecture, crosslink density, and fabrication method-all of which influence their function and interaction with the environment. Currently, there is a lack of understanding of how the polymer composition influences the internal structure of soft microgels and how this morphology affects specific biomedical applications. In this report, we systematically vary the architecture and molar mass of polyethylene glycol-acrylate (PEG-Ac) precursors, as well as their concentration and combination, to gain insight in the different parameters that affect the internal structure of rod-shaped microgels. We characterize the mechanical properties and diffusivity, as well as the conversion of acrylate groups during photopolymerization, in both bulk hydrogels and microgels produced from the PEG-Ac precursors. Furthermore, we investigate cell-microgel interaction, and we observe improved cell spreading on microgels with more accessible RGD peptide and with a stiffness in a range of 20 kPa to 50 kPa lead to better cell growth.

Carbodiimide-Driven Dimerization and Self-Assembly of Artificial, Ribose-Based Amphiphiles.

The aqueous self-assembly of amphiphiles into aggregates such as micelles and vesicles has been widely investigated over the past decades with applications ranging from materials science to drug delivery. The combination of characteristic properties of nucleic acids and amphiphiles is of substantial interest to mimic biological self-organization and compartmentalization. Herein, we present ribose- and ribonucleotide-based amphiphiles and investigate their self-assembly as well as their fundamental reactivity. We found that various types of aggregates are formed, ranging in size from nanometers to micrometers and all amphiphiles exhibit aggregation-induced emission (AIE) in solution as well as in the solid state. We also observed that the addition of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) leads to rapid and selective dimerization of the amphiphiles into pyrophosphates, which decreases the critical aggregation concentration (CAC) by a factor of 25 when compared to the monomers. Since the propensity for amphiphile dimerization is correlated with their tendency to self-assemble, our results may be relevant for the formation of rudimentary compartments under prebiotic conditions.

On-Chip Direct Laser Writing of PAN-Based Carbon Supercapacitor Electrodes.

The carbonization of polyacrylonitrile (PAN) by direct laser writing to produce microsupercapacitors directly on-chip is reported. The process is demonstrated by producing interdigitated carbon finger electrodes directly on a printed circuit board (PCB), which is then employed to characterize the supercapacitor electrodes. By varying the laser power, the process can be tuned from carbonization to material ablation. This allows to not only convert pristine PAN films into carbon electrodes, but also to pattern and cut away non-carbonized material to produce completely freestanding carbon electrodes. While the carbon electrodes adhere well to the printed circuit board, non-carbonized PAN is peeled off the substrate. Specific capacities as high as 260 µF cm⁻2 are achieved in a supercapacitor with 16 fingers.

All-Conjugated Polymer Core-Shell and Core-Shell-Shell Particles with Tunable Emission Profiles and White Light Emission.

Future applications of conjugated polymer particles (CPP) in medicine, organic photonics, and optoelectronics greatly depend on high performance and precisely adjustable optical properties of the particles. To meet these criteria, current particle systems often combine conjugated polymers with inorganic particles in core-shell geometries, extending the possible optical characteristics of CPP. However, current conjugated polymer particles are restricted to a single polymer phase composed of a distinct polymer or a polymer blend. Here, a synthetic toolbox is presented that enables the synthesis of monodisperse core-shell and core-shell-shell particles, which consist entirely of conjugated polymers but of different types in the core and the shells. Seeded and fed-batch dispersion polymerizations based on Suzuki-Miyaura-type cross-coupling are investigated. The different approaches allow accurate control over the created interface between the conjugated polymer phases and thus also over the energy transfer phenomena between them. This approach opens up completely new synthetic freedom for fine tuning of the optical properties of CPP, enabling, for example, the synthesis of individual white light-emitting particles.

Biodegradable Polyimidazole Particles as Contrast Agents Produced by Direct Arylation Polymerization.

Conjugated polymer particles provide an important platform for the development of theranostic nanoagents. However, the number of biocompatible and foremost biodegradable π-conjugated polymers is limited. Imidazole is a π-conjugated motif that is abundant in biological systems. Oxidative degradation of imidazole is present in nature via enzymatic or free radical processes. In this work, we introduce polymer particles consisting purely of polyimidazole. We employ direct arylation polymerization and adapt it to a dispersion polymerization protocol to yield uniform and narrowly dispersed nanoparticles. We employ this mechanism to produce linear and cross-linked polymer particles to tune the optical properties from fluorescent to photoacoustically active. We show that the particles can be degraded by H2O2 as well as by reactive oxygen species produced by cells and we detect the degradation products. Altogether, our results suggest that polyimidazole particles represent ideal candidates for theranostic applications.

Croconaine-Based Polymer Particles as Contrast Agents for Photoacoustic Imaging.

In the development and optimization of imaging methods, photoacoustic imaging (PAI) has become a powerful tool for preclinical biomedical diagnosis and detection of cancer. PAI probes can improve contrast and help identify pathogenic tissue. Such contrast agents must meet several requirements: they need to be biocompatible, and absorb strongly in the near-infrared (NIR) range, while relaxing the photoexcited state thermally and not radiatively. In this work, polymer nanoparticles are produced with croconaine as a monomer unit. Small molecular croconaine dyes are known to act as efficient pigments, which do not show photoluminescence. Here, for the first time croconaine copolymer nanoparticles are produced from croconic acid and a range of aromatic diamines. Following a dispersion polymerization protocol, this approach yields monodisperse particles of adjustable size. All synthesized polymers exhibit broad absorption within the NIR spectrum and therefore represent suitable candidates as contrast agents for PAI. The optical properties of these polymer particles are discussed with respect to the relation between particle size and outstanding photoacoustic performance. Biocompatibility of the polymer particles is demonstrated in cell viability experiments.

Cell Encapsulation in Soft, Anisometric Poly(ethylene) Glycol Microgels Using a Novel Radical-Free Microfluidic System.

Complex 3D artificial tissue constructs are extensively investigated for tissue regeneration. Frequently, materials and cells are delivered separately without benefitting from the synergistic effect of combined administration. Cell delivery inside a material construct provides the cells with a supportive environment by presenting biochemical, mechanical, and structural signals to direct cell behavior. Conversely, the cell/material interaction is poorly understood at the micron scale and new systems are required to investigate the effect of micron-scale features on cell functionality. Consequently, cells are encapsulated in microgels to avoid diffusion limitations of nutrients and waste and facilitate analysis techniques of single or collective cells. However, up to now, the production of soft cell-loaded microgels by microfluidics is limited to spherical microgels. Here, a novel method is presented to produce monodisperse, anisometric poly(ethylene) glycol microgels to study cells inside an anisometric architecture. These microgels can potentially direct cell growth and can be injected as rod-shaped mini-tissues that further assemble into organized macroscopic and macroporous structures post-injection. Their aspect ratios are adjusted with flow parameters, while mechanical and biochemical properties are altered by modifying the precursors. Encapsulated primary fibroblasts are viable and spread and migrate across the 3D microgel structure.

Anti-Stokes Stress Sensing: Mechanochemical Activation of Triplet-Triplet Annihilation Photon Upconversion.

The development of methods to detect damage in macromolecular materials is of paramount importance to understand their mechanical failure and the structure-property relationships of polymers. Mechanofluorophores are useful and sensitive molecular motifs for this purpose. However, to date, tailoring of their optical properties remains challenging and correlating emission intensity to force induced material damage and the respective events on the molecular level is complicated by intrinsic limitations of fluorescence and its detection techniques. Now, this is tackled by developing the first stress-sensing motif that relies on photon upconversion. By combining the Diels-Alder adduct of a π-extended anthracene with the porphyrin-based triplet sensitizer PtOEP in polymers, triplet-triplet annihilation photon upconversion of green to blue light is mechanochemically activated in solution as well as in the solid state.

Dissipative disassembly of colloidal microgel crystals driven by a coupled cyclic reaction network.

A plethora of natural systems rely on the consumption of chemical fuel or input of external energy to control the assembly and disassembly of functional structures on demand. While dissipative assembly has been demonstrated, the control of structural breakdown using a dissipative cycle remains almost unexplored. Here, we propose and realize a dissipative disassembly process using two coupled cyclic reactions, in which protons mediate the interaction between the cycles. We show how an ordered colloidal crystal, can cyclically transform into a disordered state by addition of energy to a chemical cycle, reversibly activating a photoacid. This cycle is coupled to the colloidal assembly cycle via the exchange of protons, which in turn trigger charging of the particles. This system is an experimental realization of a cyclic reaction-assembly network and its principle can be extended to other types of structure formation.

A water-soluble PEGylated RGD-functionalized bisbithiophenyl diketopyrrolopyrrole as a photoacoustic sonophore.

Photoacoustic imaging presents an innocuous imaging modality with good penetration depth and resolution. To use this modality for detection and imaging of pathological sites, new imaging probes need to be developed to enhance the contrast over endogenous sonophores. These contrast agents should specifically bind to the site of interest, be non-toxic and be cleared renally if applied intravenously. Small organic dyes with absorption in the near infrared spectrum often exhibit good photoacoustic response. However, such dyes are often not water soluble or they are cytotoxic. Here, we present a novel PEGylated sonophore based on diketopyrrolopyrrole (DPP), which overcomes these limitations and can be functionalized with desired biological recognition motifs using thiol-yne click chemistry. Proof of concept is demonstrated by functionalizing the DPP-based probe with an RGD peptide, resulting in specific binding to endothelial (HUVEC) cells and an efficient photoacoustic response.

Organic Lasers: Recent Developments on Materials, Device Geometries, and Fabrication Techniques.

Organic dyes have been used as gain medium for lasers since the 1960s, long before the advent of today's organic electronic devices. Organic gain materials are highly attractive for lasing due to their chemical tunability and large stimulated emission cross section. While the traditional dye laser has been largely replaced by solid-state lasers, a number of new and miniaturized organic lasers have emerged that hold great potential for lab-on-chip applications, biointegration, low-cost sensing and related areas, which benefit from the unique properties of organic gain materials. On the fundamental level, these include high exciton binding energy, low refractive index (compared to inorganic semiconductors), and ease of spectral and chemical tuning. On a technological level, mechanical flexibility and compatibility with simple processing techniques such as printing, roll-to-roll, self-assembly, and soft-lithography are most relevant. Here, the authors provide a comprehensive review of the developments in the field over the past decade, discussing recent advances in organic gain materials, which are today often based on solid-state organic semiconductors, as well as optical feedback structures, and device fabrication. Recent efforts toward continuous wave operation and electrical pumping of solid-state organic lasers are reviewed, and new device concepts and emerging applications are summarized.

Controlling the Hierarchical Assembly of π-Conjugated Oligoelectrolytes.

Here, a means of controlling the assembly pathways of p-conjugated oligoelectrolytes into supramolecular fibers and microtubes is presented, and it is shown how the addition of small end-caps to well-defined and pH-responsive conjugated oligomers can alter the balance between repulsive and attractive supramolecular forces and enables control of the morphology of the hierarchical assembly process. The assembly stages from nuclei to protofibers are evidenced and a hypothesis on the mechanism of microtubes formation using a combination of analytical methods is provided, revealing different degrees of order at different scales along the structural hierarchy.

Parallel and Precise Macroscopic Supramolecular Assembly through Prolonged Marangoni Motion.

Macroscopic supramolecular assembly (MSA) is a rising concept in supramolecular science, in which building blocks with sizes exceeding 10 µm self-assemble into larger structures. MSA faces the challenge of developing appropriate self-propulsion strategies to improve the motility of the macroscopic building blocks. Although the Marangoni effect is an ideal driving force with random motion paths, excessive aggregation of the surfactant and fast decay of motion remain challenging problems. Hence, a molecular interference strategy to drive the self-assembly over longer times by finely controlling the interfacial adsorption of surfactants using dynamic equilibria is proposed. Surfactant depletion through molecular recognition in the solution to oppose fast interfacial aggregation efficiently facilitates macroscopic motion and assembly. The resulting motility lifetime is extended remarkably from 120 s to 2200 s; with the improved kinetic energy, the assembly probability increases from 20 % to 100 %.

Programmable Phase Transitions in a Photonic Microgel System: Linking Soft Interactions to a Temporal pH Gradient.

Soft amphoteric microgel systems exhibit a rich phase behavior. Crystalline phases of these material systems are of interest because they exhibit photonic stop-gaps, giving rise to iridescent color. Such microgel systems are promising for applications in soft, switchable, and programmable photonic filters and devices. We here report a composite microgel system consisting of a hard and fluorescently labeled core and a soft, amphoteric microgel shell. At pH above the isoelectric point (IEP), these colloids easily crystallize into three-dimensional colloidal assemblies. By adding a cyclic lactone to the system, the temporal pH profile can be controlled, and the microgels can be programmed to melt, while they lose charge. When the microgels gain the opposite charge, they recrystallize into assemblies of even higher order. We provide a model system to study the dynamic phase behavior of soft particles and their switchable and programmable photonic effects.